Related
It's have been released already the P535 english version... even sold on Ebay.... there's some good soul that would supply image of this ROM? so i can finally install in my chinese version?!!? thanks!
It seems ASUS has just posted it at their website... ftp://ftp.asus.com/pub/ASUS/IA/P535/V4315_WWE_MS00.rar
but I'm not sure is it an English ROM as no instruction yet. Pls try it with precaution!
Besides, you may need other tools to switch the location lock, but I don't know where to get it.
Cheers,
A_C
WWE == world wide english
Its about time!!!!!
Guys this is my first time installing a new ROM, can anyone please give me a full installation instructions??? Thanks!!
A_C u are the best!!!
Thanks A_C! Really on time!
Also, quite curious! they released also one version:
P535_V4315_WWE_TH00.rar and V4315_WWE_MS00.rar in same folder! I will check what's difference! Thanks!
Sorry that finally figure out the MS00 is only for Malaysia while TH00 is only for Thailand... hope no one gets hurt.
Asus PDA Phone P535's latest firmware for Malaysia
Additional features and improvements:
1. Improve communication stability of phone and GPRS.
2. Improve noise during camera preview.
3. Improve stability in idle mode.
4. Improve stability in A2DP connection.
5. Improve keypad reaction time.
6. Improve volumn stability during communication in earphone, headset or Bluetooth headset.
7. Improve WiFi WPA-PSK connection stability.
8. Change partitial system message description.
9. Improve security for My Secret Folder.
10. Improve driver will fail to connect to a WPA AP when the process of reconnect failed.
Caution:
1. Do not upgrade to different language or regional version onto your PDA Phone.
2. Please also install phone module firmware V4.3.0 or above.
3. After the installation, previous data will not be found.
Please backup by using bundled backup software before installation.
4. After the installation, please go to "Start"=>"Programs" and restore back to default.
Cheers,
A_C
Bummer!!!
Do you think that they will release also a HK version?
or is it possible to edit this one to work also on HK version?
Hey guys,
I've just picked up a french P535 while on holiday here in France. Has anyone tried flashing the WWE ROM to a non-English phone? I'm afeared of bricking my device, but my English is much better than my française, and it would be nice to have the device in English.
I've decided to just grab my cajones and go for it.
I've installed the 4.3.0 worldwide boot ROM firmware and that was happy, then downloaded the P525 cooked ROMs to get the ASUS language unlock utility, and ran that. It reported my country code as 420c (France) and proceded to unlock the device, so all should be well. I'm downloading the Malaysian WWE 4.3.15 firmware now, and will report back with how it goes once it's on the phone.
Wish me luck!
(for some reason I'm only getting 5kb/s off ASUS' ftp server, so could be 30 mins or so...)
Ok, update...
The WWE firmware won't apply using the ASUS autoupdater. I'm able to get into the bootloader flasher by holding Power-Record-Camera and hitting reset, but it complains about not finding ROMGalaxyII.nb0.
I understand that this is the decrypted version of the ROM update, but I don't know how to get that from the WWE firmware I have. Is anyone able to help me work this out?
Thanks in advance.
couldnt you use the p525romtool -d command as explained in the p525 rom cooking thread
JJ15k said:
couldnt you use the p525romtool -d command as explained in the p525 rom cooking thread
Click to expand...
Click to collapse
No as apparently the ROM structure, however I've just found out you can flash the 535 roms using the 525 patched Autorun.exe, see http://forum.xda-developers.com/showthread.php?t=284379 for details if anyone is interested in upgrading their 535.
Did you try falshing with this patched autorun?
That's what I mean yeah, I have a P535 I bought in France, I've now got a WWE ROM on it after using the patched autorun. All it does is hand the ROM to the BIOS's bootloader flash program, bypassing the region check the official one does.
Allright I will try too.
I live in france but I have all my IT in english, plus I use qwerty KB.
Thanks for the heads up, I ll report soon.
Well, I did try the update and it worked. I don t think I would have found the trick of putting a galaxy.cap with the hacked autorun the bypass the langage check without you/pntzamaras.
Now I have the qwerty kb and consistent language on my device!
I hope they release a french ROM someday so I could sell it to fund my next purchase
JJ15k said:
Well, I did try the update and it worked. I don t think I would have found the trick of putting a galaxy.cap with the hacked autorun the bypass the langage check without you/pntzamaras.
Now I have the qwerty kb and consistent language on my device!
I hope they release a french ROM someday so I could sell it to fund my next purchase
Click to expand...
Click to collapse
Sorry but could you explain all the steps you followed to reach this successful upgrade?
Sure:
1) Download the sorg p525 cooked rom in the forum thread.
2)Download the p535 ROM.
3)Extract the p535 ROM and the p525 archive
4)Replace in the 535 ROM the autorun.exe by the one in the p525 archive.
5)Put the unlocklangID.exe utility in the same dir as the autorun you just overwrited.
6)Rename GalaxyII.cap to Galaxy.cap and put another copy of galaxyII.cap in the same folder (ie: instead of having just GalaxyII.cap you have the same file twice, named GALAXY.cap and GalaxyII.cap)
7)Put the 535 rom where you replaced the autorun on the SD card.
At this point you should have on your SD card the 2577 folder with autorun and unlocklangid.exe, and in the root, GalaxyII.cap and GALAXY.cap.
8)Insert Card and run the unlocklangdID utility.
9)Run the autorun, it should say the update is ok for your device, click file-update.
10)After you reset the flash utility appears and the device begins flashing, it takes around 5 min.
PERFECT !!!
Thanks you so much !!
hi, thanks so much for posting the solution.
on a side note, how long does it usually take for the P535 to connect to a WPA-PSK AES encrypted network?
it used to be fast before i changed to the WWE interface as per the instructions, but now the phone seems to be stuck in the authentication stage and will not be assigned an IP address by the router.
although when i turned off the wireless security, i was still able to connect to my unsecured network quickly.
hi all,
i'm going to buy Asus A696. the problem is that it is not yet on the market in our country so i'm thinking to buy it from another country - it means different language version of WM5.
my question is: with coming update of WM6 would i be able to flash the device with different language version than previously installed WM5? all i would need is WM6 in english, i don't even need my mother language..
cheers!
I buy A696, I need change the language, French to inglish, is this possivel?
Tanks
yes, me too.
i have a696 with wm5 Engish, now i want to upgrade to wm6 Chinese.
can anyone help?
1.how to save current wm5 rom for backup?
2.how to pass the language check and upgrade to wm6 Chinese.
i only have the official wm6 file, it's the .img file, from asus site.
thank you very much. please help us out experts!
and yeah, if i can flash out and save my English wm5 rom, i can share it with upstairs. so you flash my English Wm5 first, and upgrade to Enghlis wm6 directly!
isn't that sound good to you guys?
so, everyone else, please help us.
anyone has experience flashing to another language? where can one get ROM?
I tried, with the official version of Asus, but don't work, says "Language doesn't match"
We have to wait for xda patch.
Tanks
afm said:
I tried, with the official version of Asus, but don't work, says "Language doesn't match"
We have to wait for xda patch.
Tanks
Click to expand...
Click to collapse
me too i try to change spanish to italian language, and write me the same in italian: "Language doesn't match"
i need help please, how can we translate to another language our pocket pc???
i got an asus p535 and wm6 spanish pre-installed.. and i've just make a dump of my rom... (dump rom asus p535 español wm6)
look this thread and check if you can apply this method on your firmware
http://forum.xda-developers.com/showthread.php?t=308611
tonyso68 said:
and yeah, if i can flash out and save my English wm5 rom, i can share it with upstairs. so you flash my English Wm5 first, and upgrade to Enghlis wm6 directly!
isn't that sound good to you guys?
so, everyone else, please help us.
Click to expand...
Click to collapse
In the other post the user "Vakar" wrote:
If you know what to do:
I shared some files:
A696_dump_wm5_eng.rar - _http://zip.z0m.ru/3280097
_http://www.mediafire.com/?82x0ercwae9
Not approved -
A696_dump_wm6_2_eng.rar - _http://www.mediafire.com/?czeymj2nl5x
USBLoader.exe - _http://zip.z0m.ru/3279749
_http://www.mediafire.com/?fa9a9vp2knb
What we can do is:
1. attach PDA to the PC with USB cable and wait for ActiveSync to sync
2. open a command prompt
3. run pdocread -t
4. run pdocread -l
5. run pdocread 0x0 0xXXX nk.nb0 where 0xXXX is the size of the rom returned in the step 3 (for our WM5 should be 0x2200000)
6. wait until the process finish
Now we got a copy of our original PDA firmware
To upgrade the PDA back to the origiginal or to another version we got, we have to:
1. attach the PDA to the PC with USB cable and CLOSE ActiveSync
2. press on the PDA the keys POWER+ENTER+RESET, the PDA bootloader will start in upgrade mode by USB and wait for the firmware from the USB
3. use usbloader to upload our nk.nb0 or any other firmware we got to the PDA
This is what I have read from that forum, but I've not tested jet cause I have only the copy of my firmware and waiting that someone make a copy of his english PDA to be able to upload the WM6 WWE update.
That is the user "l0v3r" says in the other post.
Nothing workes A696
I have bought the german version of a696 and I am stuck. I can`t change the leanguage to english. None of the solutions for other devices seem to work with a696. Could somebody please help me out ??? I am a winhex noob and the whole thing is killing me!!!
Kovic said:
I have bought the german version of a696 and I am stuck. I can`t change the leanguage to english. None of the solutions for other devices seem to work with a696. Could somebody please help me out ??? I am a winhex noob and the whole thing is killing me!!!
Click to expand...
Click to collapse
take the original asus 696 WM6 WWE upgrade and change the value if you
have the same original value
http://forum.xda-developers.com/showpost.php?p=1483731&postcount=68
(set winhex offset in decimal/hex , double click on blue value)
Language:__original WWE_GER
12 (0C):_______09_______07
2028 (07EC):___5C_______40
5536 (15A0):___51_______5F
you can try this patch to, but check the result after
http://forum.xda-developers.com/showpost.php?p=1489893&postcount=104
If you want to upgrade from WM6 to another language look the EDIT
in this post.
http://forum.xda-developers.com/showpost.php?p=1494951&postcount=125
(no feedback for the moment)
dont forget to follow the official asus upgrade procedure
remember it's your own risk
Kovic said:
I have bought the german version of a696 and I am stuck. I can`t change the leanguage to english. None of the solutions for other devices seem to work with a696. Could somebody please help me out ??? I am a winhex noob and the whole thing is killing me!!!
Click to expand...
Click to collapse
Do you try my previous post?
I am testing it now. The first part is all right no language problem, now there is a version problem. Update older than the pda.
Kovic said:
I am testing it now. The first part is all right no language problem, now there is a version problem. Update older than the pda.
Click to expand...
Click to collapse
You tested with the "AsusWM6Patch_1_0_2" ?
Version problem?
afm said:
You tested with the "AsusWM6Patch_1_0_2" ?
Version problem?
Click to expand...
Click to collapse
this tools dont change the version number.
have you try to change the version number yourself ?
A626/A686/A696 V03.0735.00 English version
159C: DF 02 (2DFh=735)
change to
159C: E0 02 (2E0h=736)
Thanks to "l0v3r" I changed the language of my pda.
I use "AsusWM6Patch_1_0_2", my Pda is A696.
Good work
Thanks
Done
The full flahing procedure (usbloader) worked with the dump file that was reported earlier. Best regards !!!
hi there, who can help me to change my language on my asus p535.
now i got asus p535 with wm6 spanish but i need to change in italian.
i need a patch for make official upgrade asus from spanish to italian.
please help me
[email protected]
take a look here: http://forum.xda-developers.com/showthread.php?p=1601064#post1601064
'd like to downgrade my 696 Hebrew 735 firmware to English 719.
I downloaded the 719 English ROM from Asus website and changed all hex codes
according to this thread to show the same codes as 735 Heb + changed the version check to 736 (2E0h) on 159C...
ran the Upgrade Tool WW.exe and..nothing. it just did a hard reset. What am I doing wrong.......?
or better off, does anyone have 696 English ROM dump (taken with procread) with WM6 prior to 735...?
change rom languange from german to english Asus a696
I buy a696 with german rom WM6
i tried to change rom from german to english but unsuccessfull
i follow all instructions from ChiemY
{ http://forum.xda-developers.com/showthread.php?t=309388&highlight=asus&page=2 }
with upgade tools ,change rom etc.
if is possible to send ready wwe rom wm6 for a696
many tnks
Kozhura,
I download ROM image for IPAQ Hx2000 that you fixed from forum :http://4pda.ru/forum/index.php?showtopic=35871&st=330
AKU3_52_hx2000FIXed_by_kozhura.rar (http://4pda.ru/forum/attach/903449/AKU3_52_hx2000FIXed_by_kozhura.rar
My questions are:
1. What is the different from Misar's AKU 3.52 hx2000.rar (http://rapidshare.com/files/27089928/AKU3.52-hx2000.rar.html)
2. Is this English version?
3. Can it be used to upgrade IPAQ hx2750 from AKU3.5hx2000?
Thanks, Tri
I didn't know that someone already did this! Can you describe the tools that you used and the procedure? I want to include greek language in rom.
And is it possible to have Wm6 for hx 2000?
I also have a iPAQ 2750, same problem that is can be upgraded the ROM?
And I have also hx2750, and I want upgrade wm2003 to wm5! How can I do that?
Unable to update the ROM
Hey guys.
When I try to upgrade the ROM, it failed to initialize some dll file and I see a message in Ipaq saying "Digital Sign Mismatch"
Any idea ?
anavas said:
Hey guys.
When I try to upgrade the ROM, it failed to initialize some dll file and I see a message in Ipaq saying "Digital Sign Mismatch"
Any idea ?
Click to expand...
Click to collapse
Do u use Kozhura or Misar's version?
What is the type of your Ipaq? previous version of os?
I used Kozhura version, but I tried the original version too, I haven't tried the other version
The OS I have is the 1.0.0.1 H downloaded from HP's website, I am having hx2795
will this work with a 2490?
And for 2490b? I tried both but I get an error "Incorrect device SKU" I know that have some advices in 4pda, but I cannot understand cause I don't know russian. If anyone knows or can translate them this will be very helpfull.
Same here, they even have some comments about "Digital Sign Mismatch" but I couldn't understand, I tried google language transfer, but no use,
I think we have many members from Rusia, so Is there any body can help to solve our problem ?
abbaml said:
Kozhura,
I download ROM image for IPAQ Hx2000 that you fixed from forum :http://4pda.ru/forum/index.php?showtopic=35871&st=330
AKU3_52_hx2000FIXed_by_kozhura.rar (http://4pda.ru/forum/attach/903449/AKU3_52_hx2000FIXed_by_kozhura.rar
My questions are:
1. What is the different from Misar's AKU 3.52 hx2000.rar (http://rapidshare.com/files/27089928/AKU3.52-hx2000.rar.html)
2. Is this English version?
3. Can it be used to upgrade IPAQ hx2750 from AKU3.5hx2000?
Thanks, Tri
Click to expand...
Click to collapse
Dear Abbaml,
I'll try to answer your question since I'd already flashed my HX 2750 usung Misar's & Kozhura's ROM
1. The differences between Misar & Kozhura is wifi connection. Though I haven't found it yet.
2. Yes,this is English Version
3. Sure, I've done it myself.
Hope it help.
anavas said:
Same here, they even have some comments about "Digital Sign Mismatch" but I couldn't understand, I tried google language transfer, but no use,
I think we have many members from Rusia, so Is there any body can help to solve our problem ?
Click to expand...
Click to collapse
Dear anavas,
I flashed my Hx2750 (WM5 english versionby HP) with kozhura's rom. The steps is :
1. Clear reset the hx2750 (Press Calendar, power and message button). While still press those button, lightly press reset button with stylus.
2. Sync it with your computer using craddle / data cable
3. Take out your ipaq from the craddle. Press contact + itask button + reset button. Your ipaq will come to bootloader. Put it on the craddle.On the bottom left it will show usb connection. Press calendar button. Now at the bottom left it will show USB.
4. Run the HPRUU from the rom (misar's / Kozhura's). Your ipaq will begin flashing.
5. Do the clean reset once more and your pda will be ready to use
Hope this 'll help.
I flashed succesfully my hx 2490b with the aku 3.5.2 rom. Necessary was to download the sp32408 rom from:
_ftp://ftp.compaq.com/pub/softpaq/sp32001-32500/sp32408.exe
run it and when I saw this screen:
to go to the directory that the RUU utility extract its files( usually c:\ipaq\sp32408) and replace and overwrite the nbf file with this from aku 3.5.2 rom(before must rename the nbf file with the name of sp32408 nbf file)
The other steps is as described before.
bug report:
I flashed the 3.52 AKU rom and found that the activesync of exchange server is unavailable.
When you press finish in latest step of setting up the exchanger server, the setting will never been saved.
edcom said:
Dear anavas,
I flashed my Hx2750 (WM5 english versionby HP) with kozhura's rom. The steps is :
1. Clear reset the hx2750 (Press Calendar, power and message button). While still press those button, lightly press reset button with stylus.
2. Sync it with your computer using craddle / data cable
3. Take out your ipaq from the craddle. Press contact + itask button + reset button. Your ipaq will come to bootloader. Put it on the craddle.On the bottom left it will show usb connection. Press calendar button. Now at the bottom left it will show USB.
4. Run the HPRUU from the rom (misar's / Kozhura's). Your ipaq will begin flashing.
5. Do the clean reset once more and your pda will be ready to use
Hope this 'll help.
Click to expand...
Click to collapse
Edcom,
Thanks, will try the different.
But many users reported that a2dp bluetooth NOT working,....thus we can't use our bt headset. Have u tried yet?
Hi Guys.
Thanks for your update, Do you think the following will work on the new ROM
a) WiFi
b) A2DP
c) Sync over Exchange Server
d) Credent Biometric Finger print reader (cause I have hx2795)
Also how much memory left once you flash the ROM, is it faster than the HP ROM ?
A2DP Bluetooth
abbaml said:
Edcom,
Thanks, will try the different.
But many users reported that a2dp bluetooth NOT working,....thus we can't use our bt headset. Have u tried yet?
Click to expand...
Click to collapse
@abbami---> Sadly I haven't try A2DP bluetooth, since I don't have the device.
anavas said:
Hi Guys.
Thanks for your update, Do you think the following will work on the new ROM
a) WiFi
b) A2DP
c) Sync over Exchange Server
d) Credent Biometric Finger print reader (cause I have hx2795)
Also how much memory left once you flash the ROM, is it faster than the HP ROM ?
Click to expand...
Click to collapse
@anavas--> a. Wifi works great. d Biometric finger print reader also works flawlessly (I have Hx2750). For b & c, sorry haven't try it.
hi,
I will test the b & c today
thank you
And wm6 from 4pda. See here:
http://forum.xda-developers.com/showthread.php?t=329079
Ok so i just got a ipaq 4700...
so I was going to buy wm5 from ebay.. (guy has them for $5+$3 s&h)
however... I peruzed the 198 pages!!!!!!!!!! of wm6!!!!!!
can someone point me in a dummies guide to go from ppc2003 to wm6 on the 4700?
I know it is such a newb question... but look at my post count...
I have this link
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=2046&more=1&c=1&tb=1&pb=1#more2046
but do I have to go from ppc2003 to wm5 then wm6?
all help greatly appreciated and I will take my newbie lashings!!!!!
~Jeff
http://forum.xda-developers.com/showthread.php?t=325727
here's everything you'll need
therio said:
http://forum.xda-developers.com/showthread.php?t=325727
here's everything you'll need
Click to expand...
Click to collapse
oh god.. the 198 pager!!!!!
I peruzed it but guess I will read it some more and venture in...
thanks
upgrading ppc2003 to wm5
I just did this upgrade yesturday, I had my 4700, I bought WM5 on eBay, I follow instructions on it and because I didn’t look at Vista specials, I got my Ipaq totally off. It got stack on loading, showing only USB and version 1.01 gray screen.
Well, I download bootloader on my PC with windows XP, start it, select file to load in (CEOS_UPG) and after cca 10 min. I can enjoy my hp4700 again with new WM5. Now I know, that there is no problem with this tool to go back to WM5, I am going to try WM6, I will try to use install from vista and I will see. Going to try WM6_4700_RELEASE4.
Hi Peeps,
Any idea where can I get the above mentioned & the steps to do the needful. I'm new to Windows Mobile so require some help & advice.
Appreciate all the assistance & help.
Cheers!
yeah, any idea for upgrade my MWG Atom V to WM 6.1 or 6.5 ?
Das Wooski
Did anyone find a 6.1 upgrade for the MWG Atom V? Can we use the Atom Life 6.1?
MWG Atom V wm6.1
http://www.mwgusers.co.cc/viewtopic.php?f=9&t=17
MWG Atom V wm6.1 no passwd
http://www.megaupload.com/?d=HMKCE29I
to get the password.. you need to PM the thread starter from that forum..
http://pdamobiz.com/forum/forum_posts.asp?TID=220018&PN=1
what's the password to open the file?
http://www.mediafire.com/download.php?ftjlmzmzmxm
not password protected, just unzip
to flash, unzip the nb0 file into a memory card (fat32), shutdown your device, insert the card, push (not press) down for the jogger & hold it, press once on power, you see it power up but dun release jogger until u get into the bootloader mode in black screen.
let it load until it says REMOVE BATTERY, just do a reset will do.
raf1987 said:
to get the password.. you need to PM the thread starter from that forum..
http://pdamobiz.com/forum/forum_posts.asp?TID=220018&PN=1
Click to expand...
Click to collapse
Pass for unzip
M2D20771
how the step to upgrading my mwg atom v using md 20771 rom
how to upgarade my atom v using md 20771 rom from pdaviet. can anyone give me the step for upgrading?
what is the password to extract file AtomV_20771 Cleanning Rom?
can anyone help me?
thanx
pass to unzip
Can anyone help me how to pass unzip the file AtomV_20771 Cleaning ROM
I just got my first ATOM V. And had got the 6.1 and 6.5 rom. But can't get how to flash it.
Could anyone help me explain step by step how to flash the atom V?
By last comment, i should unzip the NB0 file, but i couldn't unzip it with winrar or winzip. Could anyone help me please....
Thx.
please... room wm6.5 for atom v.
To install the NB0 file,just copy to memory card,and press soft reset button once while holding volume down (jog button to down) ---> (when device ON)
Don't release untill the black flash screen appears.
I have more ROM for AtomV without Pass.
Go to --> http://www.pdagismo.com/news.php
halim8051 said:
http://www.megaupload.com/?d=HMKCE29I
Click to expand...
Click to collapse
Any Atom V users tried this rom working fine?
I bought Atom V brand new piece yesterday. Wi-Fi isnt working.Some time ago in office wi-fi was working.
Now its not able to detect home wi-fi connection.
I hope upgrading to windows mobile 6.1 will resolve the issue.
halim8051 said:
http://www.megaupload.com/?d=HMKCE29I
Click to expand...
Click to collapse
Just upgraded to 6.1 using above rom but not able change calender. And more thai language.
Current calender displaying is of 2500 year and not allowing me to change by using keyboard.
If I keep scrolling only going back till 2493 year.
M2D htc touch flo is really nice.
How to repair that year thing?
benzo_th said:
I have more ROM for AtomV without Pass.
Go to --> xxp://www.pdagismo.com/news.php
Click to expand...
Click to collapse
Direct link for his rom > hxxp://www.upload-thai.com/download.php?id=d1ee01173f79cb614b56dcf276960d02
& thread > hxxp://www.pdagismo.com/forum/viewthread.php?thread_id=258
Hello...need MWg new rom!!!
I am new to this windows mobile stuff.... but i recently got one new MWg ATOM V ....The device is nice and the features r brilliant.... the only thing is that my battery dies out quickly.. i was looking for an newer update ....can anyone help me...All the roms available r either password protected or the links er dead...
Help me pleaseeee.......