Develop Bugs

I want upgrade my XDAII WM2003 to WM2003SE

Hi alls
sory who can tell me detail for upgrade WM2003SE
Thank you

Ehh.. NO! :x
Do some SEARCHING!
This is one of the most talked about topics on this forum right now..
If you can post your search results and tell me that you STILL DON'T KNOW, then I will tell you how..

yes!
I don't know Can you tell me
thank you

....becareful....
1) Download Customized WM2003SE ROM - Asian Edition&
Customized WM2003SE Extended ROM - Asian Edition Version 2
Customized WM2003SE ROM - Asian Edition
http://forum.xda-developers.com/viewtopic....der=asc&start=0
+
Customized WM2003SE Extended ROM - Asian Edition Version 2
http://forum.xda-developers.com/viewtopic....r=asc&start=0
(2)copy the ms_.nbf of the 2nd ver and paste it to the 1st ver folder
(this will replace the ms_.nbf file of the first version)
(3) get your xda2 into bootstrap mode (reset switch + power button + directional button)before pls backup your file and ROM(do not use xbackup to backup your folder and file)...
(4) place your xda2 on the cradle, make sure your power cable is attached to the cradle and the cradle is attached to the usb port of your computer
(5) click on the file called "HimaUpgradeUt.exe"
(6) STRICTLY follow all instructions you see on your screen
(7) WAIT PATIENTLY until the screen says it is safe to remove your xda2 from the cradle
(8.) soft reset
(9) if you get to step #8, you're done!

Re: ....becareful....
Ok, ok! I have succesfully ROMupgrade to WM2003SE.
I 've downloaded 2.06 english version but there isn't good my bluetooth headset.
I 've downloaded WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip, so this is chinesse version and i've seen (i have seen squares instead of ) so many chinesse country character.
How can i correct this issue?
How can i downlad 2.2x english version or can i do xdaIIs WM2003SE to xdaII WM2003SE?

I wish there was a 2.2x English(not translated) version of WM2003SE for XDAII

thank you
i upgraded succesfully WM2003se
but not the photo contacts please help me and give advise
thank you alot

want to have the latest rom i have now tmobile mda pro

hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE

hmm nobody???? 8)

Hi,
I changed my MDA Pro to the Qtek-Rom and the Radio to the 1.04.10
If you do so, also the language will be changed (from German to English) and the Keyboard-Layout ((Quertz to Querty) which you can resolve with some registry-hacks).
My device is running more stable and has more memory (Qutek is without any branding)
Teja

tjangoman said:
hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE
Click to expand...
Click to collapse
I have the same PDA (MDA PRO T-Mobile Simlock) and i haven't ExtROM is normally?
Initially before put "1.12.125 WWE" what yuo have?

hee teja ,
so for me the next step is get the latest qtek rom and the Radio to the 1.04.10
and after that change some keys.
is it possible to explain me execly what i have to do because i am not familiar whit this software changing
you would help me allot
cheers

Will be no problem to help you - but this way I need some details:
Which kind of keyboard do you have? QWERTZ or QWERTY (look at your keyboard ant the first 5 letters are important).
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Make a new folder on your PC (maybe update)
Use WinRar to expand "UNI_Qtek_WWE_11364_151_10300_Ship.exe" to this folder
Copy "MaUpgradeUt_noID.exe" to "update"
Delete the radio.nbf in "update"
Expand "radio_1.4.10.zip" to "update"
REMOVE every card from your MDA (SD + SIM)!!!
Connect your MDA
Run "MaUpgradeUt_noID.exe"
if there is an error (mostly language...) run "MaUpgradeUt_noID.exe" again without changing everything!
After the update-prozess, you don't have to disturb the installation of the programs (it's only usefull stuff, no branding).
Change the key-respons from QWERTY to QWERTZ:
Use a registry-program like resco explorer with registry add-in and change the following key:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
change: Layout from 66569 to 66567
You can also change the soft-keyboard, but I'll tell later because I've to go!
Good luck!!!
Teja
if you got

Now at home with MDA Pro:
Here is the link how to change the symols in the soft-keyboard:
http://forum.xda-developers.com/viewtopic.php?t=34398
Some things cannot be changed in the soft-keyboard but that's no matter!
Have a nice weekend,
Teja

Teja said:
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Click to expand...
Click to collapse
Hello Teja,
The site you give here requires password.
I looked here:
ftp://ftp.xda-developers.com/Universal/
But can't find the mentionned files.
Other thing did you perform a backup of your original ROM? If yes how?
Thank you

No, I didn't perform a backup, and I think it isn't possible at the moment.
Here are the direct links. Hope they'll work:
ftp://xdaupload:[email protected]/Universal/MaUpgradeUt_noID.exe
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
ftp://xdaupload:[email protected] ROMs/UNI_Qtek_WWE_11364_151_10300_Ship.exe
Maybe you should copy the whole links in your browser and it'll work. I use firefox 1.5 and I'm able to browse on the ftp-server...
Have a nice week and good luck!
Teja

Thank you!
Hello Teja,
Those links are working fine.
Thank you!

Re: Thank you!
Lousticdr said:
Hello Teja,
Those links are working fine.
Thank you!
Click to expand...
Click to collapse
Sorry I made a mistake: I gave you the link for a old radio-update...
Here is the correct one (I also edited my post):
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
If you've allready done the updates, you can make the radio-update without loosing any datas:
rename all *.nbf to *.old and copy the new radio-file in your update-folder. Run the MaUpgradeUt_noID.exe (maybe twice) again.
The MaUpgradeUt_noID.exe will only show the radio-update!
Just do it - after finishing, soft-reset your device (no hard-reset is necessary).
Enjoy the new update!
Teja

hee teja the first letters are qwerty and i have a mda pro tmobile simlocked
Ihave everything downloaded also the resco.
i don,t have to worry a bout stuck in the bootloader and things??
i,ll have to work so i am gonna give it a try tommorow.
thanks again 8)
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33.p8
EXTROM VERSION 1.12.125 WWE

Hey,
I first felt into Boodloader-Modus, but it was my own fault. It took a long time to solve the problem, but it was very easy:
REMOVE ALL CARDS FROM YOUR DEVICE! SD + SIM!
My one was "Net-Locked" and I've never heard about problems with "Sim-Locked" (but I always was not interested in)...
Teja

Error while radio/complete update
Hi,
today i tried to update the radio on my mda pro:
- I removed the SD and the SIM card.
- I did a reset
- I started the MaUpgradeUt_noID.exe 2 times
- the upgrade started but stayed on 0 % for 5 minutes
- then it stopped with an error and I still got the original version
I tried this 3 times and I even tried to do a complete update as it is suggested here and always got the same error message.
Can this be because of active sysnc, the virus scan program or the cable (although it is the original cable)? Do I need Active Sync for the upgrade or can I stop it somehow?

Hi,
it is suppost to close "Active Sync" (by Task-Manager) and to disable the firewall / antivirus, but I never had problems without doing so...
Is your MDA in BL-Modus when you want to update (blank screen) or is it still in "normal" modus?
Maybe you've the possibility to use an old computer/notebook without any programs running on?
Teja

Radio update problems
Hi again,
it is in blank screen mode - but if you look very closely (the backlight is off) the screen sys something like updating radio... please wait.

and what happens?

nothing happens - just an error after 5 minutes
I tried it with the bootloader mode afterwards and then it worked with the radio update. afterwards i tried the full update with bootloader screen - but it only worked the second time...

It's written in this topic that you've to run the update 2 times ==> so it works perfect! Congratulations!
Teja

Teja, thanks for your mini howto guide above. I am now installing the Qtek rom on my MDA Pro.
However you should realise that only germans use QWERTZ keyboard layout, the dude who started this topic is dutch, so am I, we use QWERTY. So the info on that part is somewhat useless.
But thanks again

Someone can supply the P535 English ROM?

It's have been released already the P535 english version... even sold on Ebay.... there's some good soul that would supply image of this ROM? so i can finally install in my chinese version?!!? thanks!

It seems ASUS has just posted it at their website... ftp://ftp.asus.com/pub/ASUS/IA/P535/V4315_WWE_MS00.rar
but I'm not sure is it an English ROM as no instruction yet. Pls try it with precaution!
Besides, you may need other tools to switch the location lock, but I don't know where to get it.
Cheers,
A_C

WWE == world wide english

Its about time!!!!!
Guys this is my first time installing a new ROM, can anyone please give me a full installation instructions??? Thanks!!
A_C u are the best!!!

Thanks A_C! Really on time!
Also, quite curious! they released also one version:
P535_V4315_WWE_TH00.rar and V4315_WWE_MS00.rar in same folder! I will check what's difference! Thanks!

Sorry that finally figure out the MS00 is only for Malaysia while TH00 is only for Thailand... hope no one gets hurt.
Asus PDA Phone P535's latest firmware for Malaysia
Additional features and improvements:
1. Improve communication stability of phone and GPRS.
2. Improve noise during camera preview.
3. Improve stability in idle mode.
4. Improve stability in A2DP connection.
5. Improve keypad reaction time.
6. Improve volumn stability during communication in earphone, headset or Bluetooth headset.
7. Improve WiFi WPA-PSK connection stability.
8. Change partitial system message description.
9. Improve security for My Secret Folder.
10. Improve driver will fail to connect to a WPA AP when the process of reconnect failed.
Caution:
1. Do not upgrade to different language or regional version onto your PDA Phone.
2. Please also install phone module firmware V4.3.0 or above.
3. After the installation, previous data will not be found.
Please backup by using bundled backup software before installation.
4. After the installation, please go to "Start"=>"Programs" and restore back to default.
Cheers,
A_C

Bummer!!!
Do you think that they will release also a HK version?
or is it possible to edit this one to work also on HK version?

Hey guys,
I've just picked up a french P535 while on holiday here in France. Has anyone tried flashing the WWE ROM to a non-English phone? I'm afeared of bricking my device, but my English is much better than my française, and it would be nice to have the device in English.

I've decided to just grab my cajones and go for it.
I've installed the 4.3.0 worldwide boot ROM firmware and that was happy, then downloaded the P525 cooked ROMs to get the ASUS language unlock utility, and ran that. It reported my country code as 420c (France) and proceded to unlock the device, so all should be well. I'm downloading the Malaysian WWE 4.3.15 firmware now, and will report back with how it goes once it's on the phone.
Wish me luck!
(for some reason I'm only getting 5kb/s off ASUS' ftp server, so could be 30 mins or so...)

Ok, update...
The WWE firmware won't apply using the ASUS autoupdater. I'm able to get into the bootloader flasher by holding Power-Record-Camera and hitting reset, but it complains about not finding ROMGalaxyII.nb0.
I understand that this is the decrypted version of the ROM update, but I don't know how to get that from the WWE firmware I have. Is anyone able to help me work this out?
Thanks in advance.

couldnt you use the p525romtool -d command as explained in the p525 rom cooking thread

JJ15k said:
couldnt you use the p525romtool -d command as explained in the p525 rom cooking thread
Click to expand...
Click to collapse
No as apparently the ROM structure, however I've just found out you can flash the 535 roms using the 525 patched Autorun.exe, see http://forum.xda-developers.com/showthread.php?t=284379 for details if anyone is interested in upgrading their 535.

Did you try falshing with this patched autorun?

That's what I mean yeah, I have a P535 I bought in France, I've now got a WWE ROM on it after using the patched autorun. All it does is hand the ROM to the BIOS's bootloader flash program, bypassing the region check the official one does.

Allright I will try too.
I live in france but I have all my IT in english, plus I use qwerty KB.
Thanks for the heads up, I ll report soon.

Well, I did try the update and it worked. I don t think I would have found the trick of putting a galaxy.cap with the hacked autorun the bypass the langage check without you/pntzamaras.
Now I have the qwerty kb and consistent language on my device!
I hope they release a french ROM someday so I could sell it to fund my next purchase

JJ15k said:
Well, I did try the update and it worked. I don t think I would have found the trick of putting a galaxy.cap with the hacked autorun the bypass the langage check without you/pntzamaras.
Now I have the qwerty kb and consistent language on my device!
I hope they release a french ROM someday so I could sell it to fund my next purchase
Click to expand...
Click to collapse
Sorry but could you explain all the steps you followed to reach this successful upgrade?

Sure:
1) Download the sorg p525 cooked rom in the forum thread.
2)Download the p535 ROM.
3)Extract the p535 ROM and the p525 archive
4)Replace in the 535 ROM the autorun.exe by the one in the p525 archive.
5)Put the unlocklangID.exe utility in the same dir as the autorun you just overwrited.
6)Rename GalaxyII.cap to Galaxy.cap and put another copy of galaxyII.cap in the same folder (ie: instead of having just GalaxyII.cap you have the same file twice, named GALAXY.cap and GalaxyII.cap)
7)Put the 535 rom where you replaced the autorun on the SD card.
At this point you should have on your SD card the 2577 folder with autorun and unlocklangid.exe, and in the root, GalaxyII.cap and GALAXY.cap.
8)Insert Card and run the unlocklangdID utility.
9)Run the autorun, it should say the update is ok for your device, click file-update.
10)After you reset the flash utility appears and the device begins flashing, it takes around 5 min.

PERFECT !!!
Thanks you so much !!

hi, thanks so much for posting the solution.
on a side note, how long does it usually take for the P535 to connect to a WPA-PSK AES encrypted network?
it used to be fast before i changed to the WWE interface as per the instructions, but now the phone seems to be stuck in the authentication stage and will not be assigned an IP address by the router.
although when i turned off the wireless security, i was still able to connect to my unsecured network quickly.

iMate Ultimate 8502 & 9502 WM6.1 1.77 Downloads

As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun

Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip

thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend​

does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?

hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]

dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos

casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!

dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos

Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms

borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos

Thx mate

Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks

XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos

Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much

konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude

casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic

ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos

casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan

help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks

suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos

Imate ultimate 8150 WM6.1 official rom WWE

imate site make many step to take it !
now i uploaded to mediafire , anyone get 8150 and lockcode from the box can upgrade OS without register
http://www.mediafire.com/?zdxtwnzyv2g
hope some one find the way to upgrade imate os over NBF and SD card because when i put reset while hold a softkey it said SD and MMC mode ==> we have a chance to do it

sorry ! wrong file ! i fix it now pls wait 30m

http://www.mediafire.com/?wmtdzhzn20m

done....
ive already DL from imate which required registering...indeed it was a long process...this is what ive noticed with the new official rom:
1. a little faster than the wm6
2. they changed power settings, it now indicates how many percentage left..
3. imate also changed the mms manager...and it sucks! ive tested it and as per preference, the Arcsoft mms is much better than the new one in wm 6.1..(mms wm6- separates SMS from MMS, indicates how many percentage left in receiving/sending multimedia messages////mms wm6.1- integrates SMS and MMS in one profile, does not show percentage/progress as to receiving and/or sending MMS)
4. added Task Manager
5. SMS threading Enabled
so far, thats what ive noticed...
ADVICE: since this is not a clean rom, and thus all of what imate want to add is pre-installed, just manage your Windows/Starup folder and remove unnecessary start files that consume PPC memory..add your favorite tools such as QuickMenu(to make x, and ok botton as CLOSE/END/Terminate) and Advance Config Tools for improvement on POWER, PERFORMACE, AND STABILITY...

is this ROM support SDHC?

sorry,can't download

Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?

RussianSpv said:
Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?
Click to expand...
Click to collapse
I'm in the same condition... any ideas??

RussianSpv said:
Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?
Click to expand...
Click to collapse
cocodesigns said:
I'm in the same condition... any ideas??
Click to expand...
Click to collapse
hello,
there is no way to perform any ROM up/ downgrade with your I-mate device if you don't hand the Rom lockcode
The only thing you can do to solve this issue is to look back for the pre-owner of the device, ask for box or quick user guiding book
Good luck!
Đôngni

Can anyone point me in the direction of a download of the official WM6 or WM61 ROM for the iMate Ultimate 8150? With iMate having gone bust and the site shutdown it's a little difficult to get it through normal means

i just downloaded ROM but can't upgrade my 8150 because it keeps "trying to connect to device"... I already set up sync to windows mobile device center on vista. How can I solve the problem? tks

my imate ultimate 8150 gest stuck on the blue i mate logo screen...n cant be detected by activesync in both CB and SS modes....neeed heeeeeeeelp...please its been over six months scince it broke down
PLEASE I NEED UR HELP UrGENT!!!

no link!!!

I can donate for wm6.1 rom for 8150.

The download link is broken. Can you put up another one please? I'm still on Windows Mobile 6.0...

cocodesigns said:
I'm in the same condition... any ideas??
Click to expand...
Click to collapse
on my Box l of imate Ultimate 8105 the default password was 1234 which works for both factory resetting & reinstalling too will it be helpful to any one anyway? just guessing even on mediafire the file is no longger existing:crying: