Related
Please guys..could anybody help me??error 150 rom upgrade utility error
this rom upgrade utility does not design for your device...
I tried everything but i can't make it works...the window is always the same ... :shock: error 150 rom upgrade utility error
this rom upgrade utility does not design for your device...
MaUpgradeUt_noID doesn't work...
PLEASE PLEASE PLEASE...thanks
mik111
Did you tried hard reset it?
First, don't get panic! Well.When I tried to unlock my device and make it Super CID that message appeared in my screen too.I tried anything I was told in this fantastic forum and nothing worked.Finally I was told to reinstalled windows on my PC and...it worked!! I think it's a problem of drivers. If you are desperated try it.
Good luck and be the force with you...
may the force be with you! :lol:
but like alberbrando said, don't panic. panic would only make things worse. try re-installing your windows. Hopefully, that should resolve your problem.
???
gtm55 said:
Did you tried hard reset it?
Click to expand...
Click to collapse
hi guys..i tried to hard reset it but nothing happend..i'm very depressed...how can it be possible??i've already done this operation with this pc..and it worked..is that possible ?drivers?reinstall windows??****..is one of the of the worst boring operations i've ever done..
any other ideas?
http://forum.xda-developers.com/viewtopic.php?t=61002
frz said:
http://forum.xda-developers.com/viewtopic.php?t=61002
Click to expand...
Click to collapse
thanks frz..i've hard resetted...nothing happend...
So do the other thing they told you and reset windows.
Which is worse? a few hours boredom of backups and reinstalls, or spending what. . . 1300. . £2600 on new PDA's for you and your friends?
I know which one I'D pick.
Try
Try with this upgrade Tools
-put nk.nbf file on this folder
-put your device to bootloader mode
-deactive active sync on your computer
-connect to USB
-Run upgrade tools
cheers
indra9110
Right, don't panic, not being able to flash isn't such a big deal.
First, get an official update package for your QTek, and for your friends an I-Mate update package.
Next, hold the power button and the light-button (next to the volume slider), and stick the stylus in the little reset hole in the back. Hold the keys for a little longer, untill you vaguely see "Serial" or "USB" on the bottom part of the screen (put a little light on the screen, as the backlight will not be lit).
At this point make sure it's connected to your PC through the USB cable.
Right-click the MS ActiveSync icon (on your PC) and choose connection settings, make sure "Allow USB Connections" is unticked.
Next run the update utility, and everything should be fine again
If this doesn't help, ask again and state clearly that you've tried this already.
TheBlasphemer said:
Right, don't panic, not being able to flash isn't such a big deal.
First, get an official update package for your QTek, and for your friends an I-Mate update package.
Next, hold the power button and the light-button (next to the volume slider), and stick the stylus in the little reset hole in the back. Hold the keys for a little longer, untill you vaguely see "Serial" or "USB" on the bottom part of the screen (put a little light on the screen, as the backlight will not be lit).
At this point make sure it's connected to your PC through the USB cable.
Right-click the MS ActiveSync icon (on your PC) and choose connection settings, make sure "Allow USB Connections" is unticked.
Next run the update utility, and everything should be fine again
If this doesn't help, ask again and state clearly that you've tried this already.
Click to expand...
Click to collapse
Thanks Blasphemer but i've done that 2000 times with no success at all...i think that entirely rebuild the pc is my last chance... I don't wanna think at what will happen when the same old window will came out...I' m preparing my gun... :shock:
b4 attempting to flash
b4 attempting to flash,
chk if the 3 steps with mtty work,
if u don't get any error,
plz get ur battrey charged fully from a friend.
then attempt a flash by downloading a different rom from the one u r presently using
disable ur pc firewall
also disable ur anti virus [dont know if this is really required...but i read it in quite a few forums & it worked for me...]
flash only the rom
no extended rom or radio
use the MaUpgradeUt_noID
hopefully this should sort out ur problem....
i know coz i had the same problem....
frz
Another suggestion....
before making any other test, if it's possible, try on another PC, using a fresh rom (not the same used...) .... can be a PC problem, so test the procedure on another host ....
... sorry, again...
have you checked the bootloader version on the devices ? ... verify it before any other tentative ....
PLEASE HELP!!!
I try upgrade my Dopod 900 to WM6 by using http://micmeo.com/UNI/WM6/900_WWE_20...0_wwe_ship.zip, but after the upgrade success 100%, i disconnect the USB, and hard reset the PDA, then the PDA cannot bootup, it alwaus showing the black screen...
When i try hard reset again, i can see the display show option 0 to reset and option X to exit, but try both keys which back to the same black screen...
I also try press power+light+reset, but no responses at all... when i plug in the power cord, the light for charging not on as well...
PLS HELP....
dopod900xxx said:
PLEASE HELP!!!
I try upgrade my Dopod 900 to WM6 by using http://micmeo.com/UNI/WM6/900_WWE_20...0_wwe_ship.zip, but after the upgrade success 100%, i disconnect the USB, and hard reset the PDA, then the PDA cannot bootup, it alwaus showing the black screen...
When i try hard reset again, i can see the display show option 0 to reset and option X to exit, but try both keys which back to the same black screen...
I also try press power+light+reset, but no responses at all... when i plug in the power cord, the light for charging not on as well...
PLS HELP....
Click to expand...
Click to collapse
Try to enter the bootloader mode (power+light+reset). From what you have described it appears that you should not have problem entering the bootloader mode. Please remember that in bootloader mode yor screen is dark and only when you look very carefully you will be able to read the word "Serial" on the top of the screen and bootloader version number at the bottom. If there is inssuficient illumination in the room it is quite possible to think that the screen is blank. There will be no backlight. Once you are in the bootloader connect to your PC (before connecting please open Active sync on your PC uncheck the "Allow USB" connection in File / connection setting) Once connected the word "Serial" on the top of the screen will change to "USB". It is advisable to use only the original cable. Also connect the cable directly and not through a hub. Now reflash the rom and do a hard reset. I have faced problems by softreset after upgrade please try hard reset.
Hopefully your problem will be solved by a reflash.
Best of luck
From my past experience you have to flash to the original manufacturer rom first. Then you flash to whatever rom you want.
hope this helps
Thanks all, I'm now be able to re-flash the ROM and upgraded to WM6....
Here comes another issue... after i run the first setup and reset the PDA, it stuck on the Windows Mobile screen, any clue?
thanks again.
dopod900xxx said:
Thanks all, I'm now be able to re-flash the ROM and upgraded to WM6....
Here comes another issue... after i run the first setup and reset the PDA, it stuck on the Windows Mobile screen, any clue?
thanks again.
Click to expand...
Click to collapse
From the file link you have specified, http://micmeo.com/UNI/WM6/900_WWE_20...0_wwe_ship.zip it seems that you are using Jwrightmcps' WM6 2.01.08 WWE Rom Release.
I too have lock-up problems but only during boot-up. The frequency of this happenning is about 30% and why it happens is still unknown since the lock-up happens at random stages during the booting sequence. The only solution that I know of for now is to simply do a soft-reset repeatedly until the device boots up properly.
nvatvani said:
From the file link you have specified, http://micmeo.com/UNI/WM6/900_WWE_20...0_wwe_ship.zip it seems that you are using Jwrightmcps' WM6 2.01.08 WWE Rom Release.
I too have lock-up problems but only during boot-up. The frequency of this happenning is about 30% and why it happens is still unknown since the lock-up happens at random stages during the booting sequence. The only solution that I know of for now is to simply do a soft-reset repeatedly until the device boots up properly.
Click to expand...
Click to collapse
This appears to be a common problem as seen from different posts. Thankfully things are ok after reset.
yes, after reset few times, it works... and everytime it hangs, need reset few times...
dopod900xxx said:
yes, after reset few times, it works... and everytime it hangs, need reset few times...
Click to expand...
Click to collapse
You might find this of interest - it refers to the problem of hanging after soft reset in the 2.01.08 WWE Rom:
jmallen said:
I had this problem also. I found pulling out the battery for 5 or more seconds solved this for me every time.
Give it a try. Good luck
Click to expand...
Click to collapse
It may be solved in later versions.
d_ranade said:
Try to enter the bootloader mode (power+light+reset). From what you have described it appears that you should not have problem entering the bootloader mode. Please remember that in bootloader mode yor screen is dark and only when you look very carefully you will be able to read the word "Serial" on the top of the screen and bootloader version number at the bottom. If there is inssuficient illumination in the room it is quite possible to think that the screen is blank. There will be no backlight. Once you are in the bootloader connect to your PC (before connecting please open Active sync on your PC uncheck the "Allow USB" connection in File / connection setting) Once connected the word "Serial" on the top of the screen will change to "USB". It is advisable to use only the original cable. Also connect the cable directly and not through a hub. Now reflash the rom and do a hard reset. I have faced problems by softreset after upgrade please try hard reset.
Hopefully your problem will be solved by a reflash.
Best of luck
Click to expand...
Click to collapse
boss ... please help me ..... i have a dopod 900 ..... but it can not enter bootloader or hard reset .... ditancap usb cable, charger lights flash .... Please help keep the boss. ... thank you
Welcome to forums
Have a read on my signature link, you´ll find a lot of interesting information to recovery your Universal.
Good luck,
flash with tomal roms
Welcome to forums
Tomal ROM´s are indeed fast and stable
manybe you can nmsm your original rom again
Try update bootloader to 1.01 _ttp://rom-update.ru/programs/dd48795954c166e9431f4127c130d474.exe
German Qtek 9000 CID unlocked, hardSPL'd
running MaxStegiROM
Tried to upload D-Two's ROM.
Everything went fine, upload 100%
then: upload error.
screen went black, no reset works
no USB or Serial to be read on dark screen.
Tried battery out (battery is charged), no reaction.
When connecting to PC the red charging LED lights up for
some minutes, then goes off.
PC says connected unknown device ain't working properly
(other Qteks are recognized properly)
Trying to re-flash gives connection error when pressing "update".
Any idea?
I own a new blue angel...called by O2 II's
So, after i read ,again,and again...I have successed enter boot loader.
With white screen it's shown the version 2.07 and the line at the top "Serial"
(uhm, i use WM2003SE as the original pda when i purchase)
Ok, the problem now is, i can't flash anyrom (in Wiki and any rom i found)
After the line appear "Don't plug cable or craddle of ...." it's seem to verifie it's self... and then the line appear again "this tool is not support for this device".....and some error like that.
I was totally confused, how i made the thing go wrong? or just i missed something???
i make a soft reset, then hard reset and then 3 button together to get the white screen with no light, still see words such as: serial, version 2.0.7...
When i plug the usb cable , then the serial change into USB as usual.
As my experience,( Dopod810 and Qtek S200) everything is normal...
One problem too, i can't connect to PC with activsync (i tried any versions as possible)but itself avaiable on Boot loader...
All you understand what happen with me???
Please help me out of this. I want my Blue Angel is not the worst i got ...(i think it's possible go up to wm6???)
Finally, thanks you all for listening( reading this topic)
Yep, Happened to me too. Heres the fix.
The regular WM6 exe will give you an error everytime with the O2 IIs. Finally I printed out the WM6 directions, and also the Blue Angel for beginners and some other threads and found the answer.
You are in the right place (stuck in bootloader that is). Now you should be ready to load the OS. In the Upgrade folder you will find:
"MaUpgradeUt_noID.exe"
Run it and you will see the progress bars on the Windows screen and the dark XDA screen. Don't bother it - allow it to complete.
After it completed, I was unable to restart, soft reset, hard reboot. I think I actually had to take the battery off. When I powered it again I saw the Color Bars and knew it was good.
Good luck, Be careful. Try to be calm. I know when I was stuck in between Roms I was close to being a nervous wreck.
erh, one more message when i fkash rom...
This MaUpgradeUT novid erh something like this but this
" This tool is not support for my device" or somehow ...
I think i really stuck...
when itself verifie version of rom , i can't see both version appear on windows.
ie : version rom which is in PDA and version of rom which is in the OS i next to flash(want to flash).
So Confused . Anyway, thank for helping !!!
You are close!
Yea,
I Kept getting that too. Couldn't see both versions. Got a couple of different error messages. you are right where I was. you've got to find the upgrade exe. in one of the folders. My IIs was stuck in bootloader and I started that upgrade and it skips checking the IIs first and just begins to xfer the data.
I'm the newbiest of them all, I think I bricked my brand new Excalibur!!!
Sorry if I'm posting in the wrong place, but I need heeeelp!
O.K., here it is:
I just downloaded kavana's 080314 WM6.1 installer for the HTC Excalibur, I ran the exe and followed instructions, afterwards, the ROM app opened and started upgrading the phone but it got stuck at 1%, it made be go thru the recovery process several times (unplug, turn off, disconnect battery, turn on) but it always started on tricolor mode and always got stuck on 1%, after a third recovery process the ROM app just quit and left me hanging on tricolor mode!!!
Activesync won't connect now, I try to run kavana's exe again but it doesn't recognize the phone either, the phone is on, conected (windows makes the usb sound for connection) but it is not recongized, it's as if it's not plugged.
It is stuck on tricolor mode and I don't know what to do!
Please help me!!!
Try the dicussion thread "Bricked my T Mobile phone" there are plenty of answers there.
Will this work?
I saw this on said thread, but I presume it applies for a Herald phone, will it work?
The tricolor mode is "bootloader mode"?
Isn't there some sort of restart that can fix it?
Can someone elaborate on this? I'm really a super-noob!!!
"Try a SD card flash to unbrick your device
This is how:
MAKE SURE THE HERALD IS FULLY CHARGED BEFORE STARTING THE PROCES
#01 Download your original RUU
#02 Download (if not yet installed) WinRar and install
#03 Copy your full sd micro card to your harddisk and format your card with FAT 32
#04 Rightclick the downloaded exe file with your original RUU, click Unpack here
#05 In the map the will be created you will find a file (or similar) called RUU_signed.nbh. Copy this file to your formated sd microcard.
#06 Rename the file to Heraimg.nbh
#07 Get your Herald into bootloader modus by pressing the comm manager button and the camera button and pressing the reset button at the same time. Do not release both buttons until your in bootloader.
#08 Once in bootloader pop in your sd micro card.
#09 As soon as your card is popped in the screen will say something like "Reading SD card". Wait it out till it says "Push button to start" and slide the indicated volume slider down.
#10 The Herald will start the flashing proces. Wait it out till it says "Press any button" and hit the send button.
#11 Perform a hard reset
#12 Voila! Your back in business"
velascoperroni said:
I'm the newbiest of them all, I think I bricked my brand new Excalibur!!!
Sorry if I'm posting in the wrong place, but I need heeeelp!
O.K., here it is:
I just downloaded kavana's 080314 WM6.1 installer for the HTC Excalibur, I ran the exe and followed instructions, afterwards, the ROM app opened and started upgrading the phone but it got stuck at 1%, it made be go thru the recovery process several times (unplug, turn off, disconnect battery, turn on) but it always started on tricolor mode and always got stuck on 1%, after a third recovery process the ROM app just quit and left me hanging on tricolor mode!!!
Activesync won't connect now, I try to run kavana's exe again but it doesn't recognize the phone either, the phone is on, conected (windows makes the usb sound for connection) but it is not recongized, it's as if it's not plugged.
It is stuck on tricolor mode and I don't know what to do!
Please help me!!!
Click to expand...
Click to collapse
I believe you didn't application unlock it first. I had same issues. I finally got it to load. I don't think you bricked it. Remove battery wait a few seconds and restart phone
timothyjok said:
I believe you didn't application unlock it first. I had same issues. I finally got it to load. I don't think you bricked it. Remove battery wait a few seconds and restart phone
Click to expand...
Click to collapse
Already did that... still on "brick" mode...
Question: is my warranty still valid? I bought it 3 days ago.
you can solve simply to launch original upgrade to wm6 rom
glenbo said:
Try the dicussion thread "Bricked my T Mobile phone" there are plenty of answers there.
Click to expand...
Click to collapse
Do try these procedures first. I'm just throwing it out there but if you try again it is probably a better choice to flash to WM6 first. Then try flashing to the 6.1.
I'm sure you can return it but come up with a believable excuse.
Yes, You Are Correct!
pfunkside said:
Do try these procedures first. I'm just throwing it out there but if you try again it is probably a better choice to flash to WM6 first. Then try flashing to the 6.1.
I'm sure you can return it but come up with a believable excuse.
Click to expand...
Click to collapse
Yes, that is the correct path for him to take, install a 6.0 ROM first, before installing a 6.1 ROM. I suggest he install the T-Mo official wm6, just to get things started in the right direction again.
(1) If the device is still in the tri color mode (bootloader mode), that's a very good sign, it's not bricked. Connect the device to your PC via active sync in the tri color mode, you may think that the device is not connected to Your PC but it is, it may not look like it's connected, run the official T-Mo wm6 ROM RUU WWE, it will install on your device as long as your device is in the tri color mode.
(2)Once you get the wm6 ROM installed on your device, you must first SDA_ApplicationUnlock your device, next you want to Certificate AppUnlock and SurrealApplication Unlock your phone. Now, the reason you are doing all these unlocks are because you coming off the T-Mo wm6 ROM.
(3)After all this have been done, it now ok to try to install the 6.1 ROM on your device.......!
Great support!!! But now comes the obvious question from the n00b of the n00bs!!!
Got it, now the big question is: how to flash to WM6?
Is it done by the steps I posted early? (formatting SD, etc.)
Also, where do I get the T-mobile RUU?
Finally, there are a few things you should know, my phone was bought in Mexico, under the cellphone company Movistar (Spain's Telefonica and I've heard U.S. AT&T), it had WM5 before I "bricked" it (hehehe).
When I turn it now, a few miliseconds before the tricolor screen I can read in the phone a "waiting for SD card" message when the tricolor screen comes on, I get this version of RUU 1.15.000.
I appreciate all your help, as a contribution to this amazing community, when I get thru this, I hereby commit myself to write a fully understandable guide for noobs with the same problem (not too long).
T-Mo Wm6
velascoperroni said:
Got it, now the big question is: how to flash to WM6?
Is it done by the steps I posted early? (formatting SD, etc.)
Also, where do I get the T-mobile RUU?
Finally, there are a few things you should know, my phone was bought in Mexico, under the cellphone company Movistar (Spain's Telefonica and I've heard U.S. AT&T), it had WM5 before I "bricked" it (hehehe).
When I turn it now, a few miliseconds before the tricolor screen I can read in the phone a "waiting for SD card" message when the tricolor screen comes on, I get this version of RUU 1.15.000.
I appreciate all your help, as a contribution to this amazing community, when I get thru this, I hereby commit myself to write a fully understandable guide for noobs with the same problem (not too long).
Click to expand...
Click to collapse
Is your mobile device still in the tri color mode, if so just connect it back to your PC via active sync, It will accept the download! OK you can get the T-Mo wm6 at T-Mo's website, if not I will send you a link with the T-Mo wm6 RUU. Don't panic, you are still in the game.......!
Update!! Phone unbricked but still on WM5!
Ok... I used this ROM: HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe
It went thru the upgrading process but got stuck at 3%, anyway, it finished with a message like "this ROM cannot be used for your phone" or something and restored WM5.
Now I will follow instructions on the thread: "The Full Guide To Upgrading From Windows Mobile 5 to 6" and I'll be posting my acomplishments on this thread.
Question: The reasons for me not being still able to upgrade may be:
1. I haven't unlocked phone,
2. My phone is for Mexico and cellphone co. "Movistar", or
3. I'm running Windows XP as a virtual machine (via parallels) on an intel Macintosh and somehow there's a problem with the USB drivers.
I'm rooting for option 1 (but kavana's upgrade was supposed to already unlocked it). Option 3 maybe but then, why do I get Activesync to run? Option 2 would be a bummer!
T-Mobile WM6 RUU WWE ROM
Get the T-Mobile official Wm6 RUU WWE Rom here http://www.mediafire.com/?0vtw32zmuz3 ......!Oh! I throught you had a Excalibur.....!
Just can't seem to upgrade WM5 to WM6!
Iv'e tried the T-Mobile ROM and the HTC ROM and I get an: "invalid vendor id"
I tried every step on the aforementioned thread, even de CIS unlock, and still no luck... again, my vendor is movistar/telefonica/cingular.
Any thoughts?
Your Answer Is In jockyw2001 Thread
velascoperroni said:
Iv'e tried the T-Mobile ROM and the HTC ROM and I get an: "invalid vendor id"
I tried every step on the aforementioned thread, even de CIS unlock, and still no luck... again, my vendor is movistar/telefonica/cingular.
Any thoughts?
Click to expand...
Click to collapse
A easy frix, but read the instructions very carefully, jockyw2001 thread is located in the sticky section. What you are looking for will be in post #1.........!
New Instructions
Run the Excalibur Uspl-CID ByPass.zip, extraxt on your PC and open it there, you will see several file folders. Open the one that say (uspl) MS-Dos batch File, follow on screen instructions by pressing any key. This time when you see the white screen on your device do not panic! Run the HTC WM 6 ROM, this is done while the screen is still white on your device. Just follow the on screen instructions on your PC.............!
Now I definitively bricked it!
I ran the CID unbloker, screen went blank, ran the ROM, it got to 16% and made me do a recovery, after the recovery it gave me the same "invalid vendor id" message and it automatically restarted the phone, but...
The restart stopped at the HTC intro screen!! I've restarted it several times and it just stops on the first HTC logo screen... even a hard reset won't fix it!!!
HEEEEEEEEEEEEEEEEEELP!!!
Here is a visual aid.
You are not reading into detail. Use the Tmobile rom instead of the HTC Rom.
http://forum.xda-developers.com/showthread.php?t=368998&highlight=Jamerican
Still Bricked!!!
Yeah!!! superb visual aid!!!
I just wish I had seen it before I bricked it!!!!
This is the current state of my phone: I press power, I see a white screen with the HTC logo in the middle, the phone vibrates, still the same HTC logo... and it is stuck that way! I can't turn it off, I have to take out the battery!!
I've tried a hard reset, same thing happens! It stays stuck on the HTC logo screen and I'm forced to pull the battery out for the phone to shut down.
It is obviously not recognized in any way when I plug it to the PC's USB.
What made this happen? HTC Generic ROM got stuck on 16% before telling me "invalid vendor id", restarted the phone and voila: brick!!
Boy, I wish I was back in the tricolor mode!!!
IS THERE NOTHING I CAN DO?
I'm seriously thinking about going back to the vendor on monday and saying: It was like this when I woke up (I just bought it three days ago!!!)
If it gets that far, it doesnt seem totally bricked, ima PC man, so this may be off, but it seems like some kinda bootloader error on the phone itself....IE, the HTC screen is all that the bootloader tells the phone to load. Have you tried forcing the phone into bootloader mode?
I Looooooove Google!!!
OK... I found a turnaround for the problem... got it to go to bootloader mode!!!
Whenever something like these happens to you this is the hard way to put your excalibur/dash in bootloader mode:
1. Take out battery and sd card;
2. Plug your USB cable to your PC (not yet to the phone)
3. Press and keep holding the SIMB. key (the one with the camera next to the space bar)
4. Plug your USB cable to your phone (while still pressing the SIMB. key)
5. Voila: You are in bootloader mode!!
This was gotten for a 15 min. search in google!!
Now... I'll keep going with my WM5 to WM6 upgrade...
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
i have the same problem
is there anybody for help???
SOS please
Eenigmaa said:
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
Click to expand...
Click to collapse
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
fingerstoo said:
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
Click to expand...
Click to collapse
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Eenigmaa said:
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Click to expand...
Click to collapse
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
vladtapes said:
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
Click to expand...
Click to collapse
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA.
Click to expand...
Click to collapse
Eenigmaa said:
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
Click to expand...
Click to collapse
do you confirm the method is fully functional?
I made a backup of my german original rom, if i have problems i want to restore it...
have you got a backup of your old wm5?
thanks
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Eenigmaa said:
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Click to expand...
Click to collapse
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
vladtapes said:
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
Click to expand...
Click to collapse
You can if you use an translator like www.windowslivetranslator.com or translate.google.com
then it is pretty easy.
I've resolved...
Fully functional WM6.0 newplowe in English...
now I'm searching for editing it in Italian/French but I need to edit the rom part of the XIP (just that).
For doing that, I need to open decrypt the file .nbh file (don't really know howto, and newplow doesn't answer about that... ).
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
rcretu said:
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
Click to expand...
Click to collapse
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
N560 - still stucked in the climbers bagground after WM 6.1 flash
fingerstoo said:
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
Click to expand...
Click to collapse
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
rcretu said:
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
Click to expand...
Click to collapse
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
rcretu said:
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
Click to expand...
Click to collapse
PHEW! Thank goodness. I suspect you did not do the hard reset correctly at first. But I agree about the Loox being precious! I look after mine very carefully! Glad I could help you. My pleasure....
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
vladtapes said:
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
Click to expand...
Click to collapse
I think you have received a reply from Newplow on his guestbook....
Hi
I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP!!
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
I've done already procedure You've mentioned here with taking of the battery for at least 30 secs with hard reset afterwards but it is still climibing screen. Can U manage this as well???
THX
The most common error with the procedure is NOT making a proper or true hard reset, or back to factory settings reset. If you do it wrong, you will only achieve a soft reset, the same as you get if you just put the stylus in the reset hole in the base of the N560.
The correct procedure is to hold Power/Resume/Suspend button (on/off button) and the Calendar button simultaneously. Keep holding them and with the other hand press in the reset hole with the stylus. The screen should blank out. KEEP holding the other two buttons all this time, and release the stylus. KEEP holding those two buttons until the screen display returns, only then release them.
This should allow another burn.
I hope this is the problem. It has happened to me and others, so I think I am right. But if this fails, you may need another approach.