My Diamond touch keeps resetting itself continously, so i want to return it bacause i still have warranty.
The SPL is however unsigned (Olnex 1.40 unsigned), so no warranty. I found a guide for restoring the stock SPL, but i can only get into the bootloader, not into the OS to run the SSPL-utility.
Is there a way to restore the stock SPL in the bootloader? I tried several times, but the current SPL is write-protected
Fixed it with mtty
frankem said:
My Diamond touch keeps resetting itself continously, so i want to return it bacause i still have warranty.
The SPL is however unsigned (Olnex 1.40 unsigned), so no warranty. I found a guide for restoring the stock SPL, but i can only get into the bootloader, not into the OS to run the SSPL-utility.
Is there a way to restore the stock SPL in the bootloader? I tried several times, but the current SPL is write-protected
Click to expand...
Click to collapse
Hi
You have to start flash the stock spl from windows mobile and AS/WMDC and not from Bootloader
Goodluck
how to flash spl from original to remaked with mtty?
Related
I'm wondering how to do if one wants to downgrade to factory default spl, radio and rom without leaving any traces of wm6? Is there any guide available for this?
Flashing with wm5 rom from htc does not restore default spl.
aburman said:
I'm wondering how to do if one wants to downgrade to factory default spl, radio and rom without leaving any traces of wm6? Is there any guide available for this?
Flashing with wm5 rom from htc does not restore default spl.
Click to expand...
Click to collapse
I think it does restore SPL.
Try here: trinityguides.info
mikhe69 said:
I think it does restore SPL.
Try here: trinityguides.info
Click to expand...
Click to collapse
Sorry but it doesn't. No guide for downgrading on that site either.
http://rapidshare.com/files/67947675/SPL_IPL_SPLASH_ORIG.rar
Restore original IPL, SPL and Primary&Secondary Splash screen (IPL 0.50, SPL 1.0)
incorect said:
http://rapidshare.com/files/67947675/SPL_IPL_SPLASH_ORIG.rar
Restore original IPL, SPL and Primary&Secondary Splash screen (IPL 0.50, SPL 1.0)
Click to expand...
Click to collapse
Thanks a lot man, very appreciated!
Hi,
My Diamond has no response on the screen, so I think I need to return to factory for repairing. However I have difficulties in falling back to stock ROM and SPL.
From the Wiki:
---------------
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
...
-----------------
I can't flash my ROM to latest HK WWE CSL ROM (2.03) as it just stopped at 0%. I'm using SPL-1.30.OliNex.
Questions:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
1) Should I flash to v1.93 (the very beginning of the ROM)?
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
3) Anyone can give me a reference on the step-by-step in details...
Thanks!
Please help...
F810
Questions:
f810 said:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
Click to expand...
Click to collapse
If the latest was the offical from the site then you could use that - as you are having issues flashing this with 1.30 HSPL, I would suggest updating that to 1.40
f810 said:
1) Should I flash to v1.93 (the very beginning of the ROM)?
Click to expand...
Click to collapse
This might be a easier option and should work woth the 1.30 HSPL
f810 said:
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
Click to expand...
Click to collapse
This is recommended
f810 said:
3) Anyone can give me a reference on the step-by-step in details...
Click to expand...
Click to collapse
Its really straight forward like the WiKi suggests
This Thread may help
Thanks a lot.
Re Q3, so do you mean if I extracted the stock NBH, it's only OS but not including RADIO? If so, I will get the RADIO from wiki page later. Would you please clarify for me?
After your information, I think the steps in Wiki are clear. Thanks.
If this is HK ROM is the one you have downloaded from HTC PAGE then it has a radio included
Since my Diamond is totally malfunction in the touch screen, I can't response to all the confirmation & prompts...
I've failed to install Stock ROM and tried your recommendation on upgrading to HSPL 1.40. There was a confirmation on running the program in my Diamond and I can't press YES and now my diamond is just like bricked.
I've also tried pressing VOL DOWN + Reset to connect the Diamond via USB. The ROM Update Utility has "successfully" update the HSPL, but actually when I hard reset it and found it's still running 1.30... Can I just use this approach to fallback to Factory status??
Anyone has good idea on how to fallback to Factory Stock ROM, RADIO and SPL, provided that my screen has totally no response to me?
PLEASE...PLEASE...PLEASE help.
You will not be able to update olipros Hard SPL in bootloader mode as the SPL is protected and the 1.30 will prevent this although show its been done.
What you will need to do then is just load a 1.93 ROM from boot loader. the were some in that link i posted earlier. as to reverting to the default SPL - you may be luck not to need the screen for any confirmation. but running a new SPL to overwrite Oli's you will need to use windows and the RRU
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
band27 said:
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
Click to expand...
Click to collapse
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Here you go....I did a search
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Read this............Scroll to Post #39
http://forum.xda-developers.com/showthread.php?t=400950&page=4
band27 said:
Here you go....I did a search
Click to expand...
Click to collapse
I also got that but it's not win32 program... I believe it's running on the Diamond. But I've hard reset, and never able to setup as it's screen was not functioning now...
kawatsu said:
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Click to expand...
Click to collapse
That ROM had a different boot image - so you need to replace that by flashing another splash .NBH file using RUU.
Original splash can be found HERE
and if needed CUSTOM RUU HERE
Just un-zip these and put the splash file in the same folder as the Custom RUU and run the RUU - the flash should take a few seconds and viola - bye bye Diamond project splash.
f810 said:
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Click to expand...
Click to collapse
I think as long as the SPL is changed and the ROM is of the original language the I think it should be OK to send back like that
f810 said:
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Click to expand...
Click to collapse
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Which is the original SPL?? 1.23, 1.34 or 1.37? I do recall taking a picture of the original SPL when i 1st got the Diamond for days like that but i just can't find it now
I'm bought it from Malaysia. Anybody can help me confirm this??
R3PUBL1K said:
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Click to expand...
Click to collapse
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
f810 said:
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
Click to expand...
Click to collapse
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
f810 said:
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
Click to expand...
Click to collapse
Can anyone help??
hi guys
i would like to restore hard spl
when i bought diamond it has 1.93 wwe (rom) i dident remmer it hard spl
please help me to restore hard spl
thanx
i can restore it
this way
first i flashed it and install 1.93 wwe
then download this (1.93 and ruu) http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
then copy sspl manual on device and run ruu
So I have an HTC Touch Diamond GSM (DIAM 110)
I want to restore my phone to stock settings. I have done hard reset.
I have an issue where my phone hangs on the "touch diamond" screen. I can get into the boot loader and load (some) stock spls. (Others including stock HTC RUU give error)
When I load stock SPL, phone resets, but upon reset it shows OLINEX still.
What can I do???
i have the same problem
i can´t restore another SPL
i always see SPL - 1.40 OliNex
how can i replace it ?
thank´s a lot
Hi all,
I have 1.40 Olinex HSPL (Official ROM & Radio), this version prevents me from upgrading to the newest Official ROM. It reaches 100% and then shows 270 error and stuck on bootloader no matter what i do, to bring it back again i need to reflash with the old ROM.
I tried to flash the Original SPL (all versions), didn't work (the flash goes well, but the SPL stays 1.40 Olinex), I tried to flash it to a different HSPL (all versions too), still no go...
What should i do ?
Thanks
liamR said:
Hi all,
I have 1.40 Olinex HSPL (Official ROM & Radio), this version prevents me from upgrading to the newest Official ROM. It reaches 100% and then shows 270 error and stuck on bootloader no matter what i do, to bring it back again i need to reflash with the old ROM.
I tried to flash the Original SPL (all versions), didn't work (the flash goes well, but the SPL stays 1.40 Olinex), I tried to flash it to a different HSPL (all versions too), still no go...
What should i do ?
Thanks
Click to expand...
Click to collapse
1.40 Hard spl can not be overwritten as it's protected. You need to search for an app called Jump SPL. This utility will allow you to switch Hard SPL's.
liamR said:
Hi all,
I have 1.40 Olinex HSPL (Official ROM & Radio), this version prevents me from upgrading to the newest Official ROM. It reaches 100% and then shows 270 error and stuck on bootloader no matter what i do, to bring it back again i need to reflash with the old ROM.
I tried to flash the Original SPL (all versions), didn't work (the flash goes well, but the SPL stays 1.40 Olinex), I tried to flash it to a different HSPL (all versions too), still no go...
What should i do ?
Thanks
Click to expand...
Click to collapse
Unpack the attached archive. Connect your device to activesync and run the batch file (diamond-sspl.bat), press enter twice to copy the needed files to your diamond, press enter again and the file jumpspl will start on your device. Press the button on your device, which appears. Now your screen will turn black. Last step is to run your desired SPL. Done
Thanks it worked!
liamR said:
Thanks it worked!
Click to expand...
Click to collapse
You're welcome.
If 1.40 olinex is protected how to back to shippedSPL?
please refer to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
liamR said:
Hi all,
I have 1.40 Olinex HSPL (Official ROM & Radio), this version prevents me from upgrading to the newest Official ROM. It reaches 100% and then shows 270 error and stuck on bootloader no matter what i do, to bring it back again i need to reflash with the old ROM.
I tried to flash the Original SPL (all versions), didn't work (the flash goes well, but the SPL stays 1.40 Olinex), I tried to flash it to a different HSPL (all versions too), still no go...
What should i do ?
Thanks
Click to expand...
Click to collapse
i have the same as you and i don't have that problem .
I changed 1.40 olinex hardspl to 1.93 without any problem.
Thanks Man
Im having issues with SPL.
Originally, the device came with 1.93, so when I installed I installed hard spl 1.93 olinex.
Now I tried to do sim unlock and the guide asked me to go hspl 1.24, I tried to skip that step and go staright and install the patched radio, but it failed to update - error 226 with RUU.
I thought maybe its related to the hspl, so i downgraded to 1.24 but still I have that issue that I get error 226.
after i downgraded i still see in the bootloader mode spl 1.93 olinex.
I thought maybe to stock spl and then from there to hspl 1.24 and from there to patched radio maybe it will succed.
But even in stock spl it appears spl 1.93 olinex.
Also, besides that, i cant install the patched radio.
I appraciate your help..
Thanks.
I've noticed it the other way around, I first HardSPLed it with v1.40 and some later I flashed v1.93 (I think at least twice), without any error, but the flashscreen still says v1.40. Never had any problem though ...
Can't help you with the SIM unlocking, haven't tried it yet.
with the spl im mostly concerned because one day i might need warrenty and if it says 1.93.olinex..someone will probably suspect..
To Sim-unlock it doesn't matter you have HardSPL(Olinex) 1.40 or 1.93. The most important is your radio, you mut have the Diamond_Radio_1.00.25 intermediate to accept the SIM-unlock proces. Look at the thread .. unlock (sticky) and get the file - Radio downgrade - then you go. The error 226 is related to the radio version !!!
eranyanay said:
Im having issues with SPL.
Originally, the device came with 1.93, so when I installed I installed hard spl 1.93 olinex.
Now I tried to do sim unlock and the guide asked me to go hspl 1.24, I tried to skip that step and go staright and install the patched radio, but it failed to update - error 226 with RUU.
I thought maybe its related to the hspl, so i downgraded to 1.24 but still I have that issue that I get error 226.
after i downgraded i still see in the bootloader mode spl 1.93 olinex.
I thought maybe to stock spl and then from there to hspl 1.24 and from there to patched radio maybe it will succed.
But even in stock spl it appears spl 1.93 olinex.
Also, besides that, i cant install the patched radio.
I appraciate your help..
Thanks.
Click to expand...
Click to collapse
just flash this Spl : http://forum.xda-developers.com/showthread.php?t=400402 and then your problem is solved use the first zip download it worked with me