Related
Hello all,
I don't know whether this has been discussed before or not as I haven't been able to find it. I'm wondering if it's possible to install the Orange Today menu? I'm using the Indra AKU3.2 ROM and I wanted to install only the today screen app from the Orange ROM. If this has been discussed could someone just point it out to me? Thanks.
P.S. Could someone also give me the link to the FTP site? I can never find it. Thanks!
Orange menu
The orange menu is nice application but it has very limited configuration possibilities.
I have seen already some post regarding this. However no one were able to find a way to further to improve it.
Orange menu
The orange menu is nice application but it has very limited configuration possibilities.
I have seen already some post regarding this. However no one were able to find a way to further to improve it.
Bulldog said:
The orange menu is nice application but it has very limited configuration possibilities.
I have seen already some post regarding this. However no one were able to find a way to further to improve it.
Click to expand...
Click to collapse
Hey there. Thanks for the cab file. It's really nice. Though it looks better on the smaller sets rather than the Universal. But thanks.
P.S. Sorry for the late reply. Didn't receive a notification of reply. I just stumbled on the thread from my cp. Cheers.
Screen shots please.
CWKJ said:
Screen shots please.
Click to expand...
Click to collapse
sorry about this random post but the Orange menu dont work in Crossbow ROM? I find that Orange menu saves a lot of memory! It truly makes Universal more of a phone than a computer. Because i was recently wondering... I wanted a phone and not a computer... and really i could have made my laptop a phone too by buying those quad band pcmcia cards. But I want the Universal to have more "phone" features than other "computer" features.
nuclear said:
sorry about this random post but the Orange menu dont work in Crossbow ROM? I find that Orange menu saves a lot of memory! It truly makes Universal more of a phone than a computer. Because i was recently wondering... I wanted a phone and not a computer... and really i could have made my laptop a phone too by buying those quad band pcmcia cards. But I want the Universal to have more "phone" features than other "computer" features.
Click to expand...
Click to collapse
To start off, the Universal is a makeshift computer. Not a phone. If you're looking for more phone then you should get the smaller PDAs or a P990 or something. The fact is that the Universal will never be more phone than computer. It's just the way it's been built and well the reason it's been built. Either way I've tried the Orange menu on my Universal. I have the AKU 3.5 ROM by Helmi_c and it's working fine ... though I'm not using it much now.. Have found a new arangement for my Universal: Wisbar Advance 2, SPB Pocket Plus and SPB Diary.
Btw, Sorry for the delay in putting up the screenshots... Also sorry for them being small but there's a restriction on the size of the file and so I had to keep them small. The last one is with the Orange theme that comes with the menu.
I'm loving NFSFAN's new Bell ROM, but i'm not crazy about the slide to answer on the phone canvas.
I'm looking for a way to replace the slide to answer / ignore with buttons instead of a slider while keeping everything else the same.
I've researched different skins for this dialer (there are some cool looking ones out there!!) but none of these change the slider.
Any help would be appreciated.
This one works for me; http://forum.xda-developers.com/showthread.php?t=429179. There is also a black version somewhere Google 'Black Minimal Dialer'
I've now been using NFSFAN's ROM for a few days now.
Must say i've gotten quite used to the dialer. I like all of the other features. Especially the "in call curtain". While i'm still not in love with slide to answer I understand the concept of why it was created. If I want to press a button that's what the hardware key is for!!
I wasn't really looking for a new dialer, but i've learnt the slide is an integral part of the package.
Thanks for the response anyways. You were the only one to do so. (everyone else was probably busy shaking their heads!!!)
now mine might sound like a really stupid question, but can I install the opal's slide to answer dialer on my sprint htc vogue ? are all the ## codes working for you on your phone ?
Yes, everything works (911 etc)
In NFSFAN's words, the data connection is not active during a call, it just breaks the data errors.
The dialer is included in his ROM, i'm not really sure if the same one is found anywhere in CAB format. A quick google search for "opal slide to answer CDMA" should yield some results for you.
http://forum.xda-developers.com/showthread.php?t=466519
http://forum.ppcgeeks.com/showthread.php?t=44017
http://forum.ppcgeeks.com/showthread.php?t=53599
and many others!!
Happy hunting,
Jason
thanks jmitr for your patient answer and the links to the solutions.. really really appreciate your patience and yes I just installed it and working fine now.. love the new dialer...
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
I know s2u2 has a large picture to answer the phone with.
I don't use it anymore, I found it drained my battery too fast. With NFSFAN's rom and the opal dialer it isn't really needed anyways.
Sorry none of the links led to anything fruitful, my only experience with this dialer is in the custom ROM. Must say it has grown on me though!!
myshinynewtouch said:
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
Click to expand...
Click to collapse
I've been using this on my Sprint Touch for months now with out any issues. Here's a link for a post I have up at PPCGeeks for you to check out . Please let me know if you have any problems. If you don't want the lock feature, don't install Albert's cab...
myshinynewtouch said:
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
Click to expand...
Click to collapse
I had trouble getting the dialer to work initially also. It seemed to be tied to the rom build that something changed after the 20XXX rom build was released. If I used anything earlier it wouldn't work. If your on a stock rom that may be part of the issue. Not sure, but just my experience in fixing the issue.
It is tied to a shell component.
NFSFAN said:
It is tied to a shell component.
Click to expand...
Click to collapse
Hey thanks for the reply NFSFAN, the slide to answer was the only part of your ROM that I didn't really like......at first. I couldn't imagine going back to the old dialer now.
It is good to learn what's possible and what's not though, thanks again for the answer.
Cheers,
Jason
jmitr said:
Yes, everything works (911 etc)
In NFSFAN's words, the data connection is not active during a call, it just breaks the data errors.
The dialer is included in his ROM, i'm not really sure if the same one is found anywhere in CAB format. A quick google search for "opal slide to answer CDMA" should yield some results for you.
http://forum.xda-developers.com/showthread.php?t=466519
http://forum.ppcgeeks.com/showthread.php?t=44017
http://forum.ppcgeeks.com/showthread.php?t=53599
and many others!!
Happy hunting,
Jason
Click to expand...
Click to collapse
Codes don't work for me on the verizon beta rom. Is it just me or do you have to use the folder rather than the dialer?
Hi,
please help an HD newbie...
I like the standard TouchFlo on my, more or less, still standard HD but would simply like a plain black background on all the Tabs/Pages or whatever (The home/weather/ music etc ).
Can anyone give me a simple cab or something equally straighforward to do this?
Also, I have a different contacts program running (funcontacts) It is called fine when I call it from contacts via phone etc but NOT from the People tab, All People button. How do I get my HD to do this please.
Any help much appreciated!
Operator 34.119.1.611 (orange)
Rom Ver 1.19.61.1 WWE
Rom date 11/25/08
Radio 1.09.25.14
Protocol Ver 52.49a.25.26U
scottmo said:
Hi,
please help an HD newbie...
I like the standard TouchFlo on my, more or less, still standard HD but would simply like a plain black background on all the Tabs/Pages or whatever (The home/weather/ music etc ).
Can anyone give me a simple cab or something equally straighforward to do this?
Also, I have a different contacts program running (funcontacts) It is called fine when I call it from contacts via phone etc but NOT from the People tab, All People button. How do I get my HD to do this please.
Any help much appreciated!
Operator 34.119.1.611 (orange)
Rom Ver 1.19.61.1 WWE
Rom date 11/25/08
Radio 1.09.25.14
Protocol Ver 52.49a.25.26U
Click to expand...
Click to collapse
The cab below should give you the same background image across all TouchFLO tabs. Install it and soft-reset. As far as I know you cannot re-map the "All People" softkey from the People tab...
Thanks
Thanks CW,
Going out for an hour but I'll try when I get back. Thanks again,
Scott
No Go
Thanks CW but I'm afraid it only partially worked. All the tab screens went black but the ino at the top of each went really weird and cr*ppy!
Anymore ideas anyone please.
scottmo said:
Thanks CW but I'm afraid it only partially worked. All the tab screens went black but the ino at the top of each went really weird and cr*ppy!
Anymore ideas anyone please.
Click to expand...
Click to collapse
I should have looked earlier at what rom you are running. You have quite an older version of TouchFLO in your rom. The cab I posted was intended for a much newer one. That's why it didn't work as I described it would. You could look into Maxycy's software to customize your TouchFLO. Other than that, I don't know what else still supports the older version.
Stupid question?
Why is it an old ROM in a brand new phone?
Shouldn't it be bang up to date? I had to wait for delivery because they were waiting for 'new' phones!
Am I just stupid?
scottmo said:
Stupid question?
Why is it an old ROM in a brand new phone?
Shouldn't it be bang up to date? I had to wait for delivery because they were waiting for 'new' phones!
Am I just stupid?
Click to expand...
Click to collapse
No, HTC / the vendor is. Said you had a 1.19.xxxx rom when they have up to 1.59.xxxx released now. You should look into updating it. Are you interested in custom roms? If not, you should still look into updating to the latest official rom
in fact even the most recent stock roms (provided by operator) are often outdated compared to the roms you can find here (@xda)
they are mostly based:
newer builds of wm6.1 or wm6.5beta
some parts from other (newer) devices
optimzed and customized by the authors
i suggest you to read the hd section to see what u can do with your phone
Will do guys, thanks.
BTW, got my black screen on all tabs! Just had to do a bit of work and use Manila Editor. I will take a look at custom ROMs but they scare me
Maybe I'll pluck up the courage, just worried I'll brick my device!
Thanks again.
scottmo said:
Will do guys, thanks.
BTW, got my black screen on all tabs! Just had to do a bit of work and use Manila Editor. I will take a look at custom ROMs but they scare me
Maybe I'll pluck up the courage, just worried I'll brick my device!
Thanks again.
Click to expand...
Click to collapse
Flashing is easy if you are well informed beforehand. Just do the research before you flash. Read the Wiki and my guide on flashing roms. Links are in my signature.
I can't find anyone that has posted one yet, but I have made one for all you that have one and have the screwed alt key! The registry file is attached! It is not a hack at all. Just a registry export that worked!
Enjoy
edit//Cab added to post.
edit2//Also, just an FYI for everyone, the TMO keyboard has the GBP and Euro symbols on the hardware keyboard, it just wasn't put on the key itself. It is the same keys as the HTC version for them. alt+e = euro and alt+r = pound symbol.
edit3//Make sure HLKM\Software\Tegic\eT9\Ime\KeyboardLayouFiles shows et9.rhodium.wwe.txt. Otherwise, the layout will still be messed up.
I think this should get stickied for a few weeks
If necessary. I am sure it will stay alive for a bit since a lot of us have the TMO version.
To be fair though, you get some of the credit. Your suggestion in that other thread is what made me do it. It took me about 1 hour of poking around.
Can any onecab this up for easy install? That would rock, changing values to match though reg editor does not work!
Just use Task Manager to import it. It worked for me.
Cal-El said:
Can any onecab this up for easy install? That would rock, changing values to match though reg editor does not work!
Click to expand...
Click to collapse
I'll cab it now and create a mortscript and include it in my ROM for now on. I t should save like 10000 posts
Cab created...
gehzumteufel said:
If necessary. I am sure it will stay alive for a bit since a lot of us have the TMO version.
To be fair though, you get some of the credit. Your suggestion in that other thread is what made me do it. It took me about 1 hour of poking around.
Click to expand...
Click to collapse
Welcome to the wonderful world of modding your phone
Thanks but you are the one who did it.
Thanks! I have never used/done that type of stuff. I am just happy to be able to contribute finally.
Wow, I posted about this problem today and now their is a fix to it. You guys work fast and I didn't even get a chance to get use to the ctrl key that sub for the alt key.
Good looks!!!
EDIT: Confirming that it works! ....don't forget to reset because it won't work if you don't.
so what exactly is the problem with the tmobile us alt key anyway? i just got my tp2 yesterday and haven't really noticed a problem with it?
This is only an issue for people with cooked roms.
At0mAng said:
I'll cab it now and create a mortscript and include it in my ROM for now on. I t should save like 10000 posts
Cab created...
Click to expand...
Click to collapse
WOW~~ that worked. sweet!!
thanks again!!
Well my Rom is stock but I'll be sure to remember this if I flash a new one.
This fixes the alt key, for sure. But what about the shortcuts on the arrows? Those are still incorrect, for me. Is this a separate problem? I assumed it should be related, due to the fact that the shortcuts on the unlocked devices are different than the T-Mobile shortcuts.
gehzumteufel said:
This is only an issue for people with cooked roms.
Click to expand...
Click to collapse
The HSPL is out, now? We can now install cooked ROMs on the TP2? How did I miss this?
Yep, HSPL is out now. haha
Thread stuck whilst the topic is hot
Dave
Thanks Dave!
what exactly does this fix ?
my ctrl button doesn't function at all but I thought it's due to the PDAC hebrew support I have.
also FN+SYM doesn't ddo anything.
my TP2 is unbranded.
Tourist! said:
what exactly does this fix ?
my ctrl button doesn't function at all but I thought it's due to the PDAC hebrew support I have.
also FN+SYM doesn't ddo anything.
my TP2 is unbranded.
Click to expand...
Click to collapse
As noted by the thread title, this ONLY applies to the TMO (T-Mobile) US branded TP2. It applies to NO other branded or unbranded TP2 devices. It fixes the keyboard layout changes that were implemented on the TMOUS TP2. The Alt, ctrl, and a few other keys had some changes.
To fix your keyboard, flash back to the original rom, export the same reg key that is in the first post, and then apply that to the newly flashed rom.
I've recently upgraded to the standard Vodafone 6.5 rom, and so far I'm rather happy with it...
Found SBP Pocket Plus doesn't work well, but as all I was after was the ability to edit file extensions now use Total Commander/Resco File Explorer.
What I would love to be able to do is alter the short-cut links on the lower scrolling links bar... any ideas?
But, in general, I'm not rushing to change many things as I'm finding it rather good as is.
What are other's thoughts - and ideas on additions to improve it?
eugene7 said:
I've recently upgraded to the standard Vodafone 6.5 rom, and so far I'm rather happy with it...
Found SBP Pocket Plus doesn't work well, but as all I was after was the ability to edit file extensions now use Total Commander/Resco File Explorer.
What I would love to be able to do is alter the short-cut links on the lower scrolling links bar... any ideas?
But, in general, I'm not rushing to change many things as I'm finding it rather good as is.
What are other's thoughts - and ideas on additions to improve it?
Click to expand...
Click to collapse
I have a Vodafone branded TP2 and I was hoping to upgrade to 6.5 Rom. can you kindly point me in the right direction to do this ( i am quite new to these things and dont wanna ruin my phone)... thanks..
Also if i do not like the 6.5 upgrade can i go back to 6.1 stock rom i am on now?
Download the uopdate here:
http://devicehelp.vodafone.co.uk/firmwaredevice.php?ModelID=384&e=0
The list 'previous version' too, so I guess you can go back...
Been using it for quite some time. Its a good rom. A couple of minor bugs here and there. One that a couple of people have observed is every now and then a new txt will arrive and the device will act like it will never stop vibrating. The last time it happened to me, it actually stopped after a couple of minutes (I wanted to see how long it would take).
As for editing the scrolling links at the bottom...do you mean adding new tabs to TF3D? It is simple to remove them, but adding new ones I'm not so sure about...
Jason
Yep, I did meant TF3D Tabs - I know how to remove from the list, but was hoping there was a reg edit or two to replace/add new ones...
Keep hoping someone will come up with a solution...
eugene7 said:
Download the uopdate here:
http://devicehelp.vodafone.co.uk/firmwaredevice.php?ModelID=384&e=0
The list 'previous version' too, so I guess you can go back...
Click to expand...
Click to collapse
Thanks for that! will give it a try...... I hope its not as bastardized as the 6.1.. "vodafonism" if u ask me.......
Please do I have to run Hard SPL before I run this upgrade? been reading the Hard SPL tutorials and it seems I need to have it to flash other ROMS or return to my Vodafone stock rom if i am not happy with the upgrade.