Develop Bugs

Network settings

does anyone know how to prevent the BA to switch networks automatically, I have changed the settings from automatic to manual, but it still switches aparently when Im not looking !!! hahaha Im away from home on business and im right at the border and sometimes Im on home network and then when Im not looking Im on International roaming... and I cant maker or recieve calls and stuff...
also does anyone know any of the Call Barring network codes for Cingular?
we need to start a thread where everyone can post all their cool BA regsistry Tweeks... here is some rather simple ones...
HKLM\Software\Microsoft\Color
if not there you can insert them
Binary_value 4 = Today screen text
Binary_value 9 = Start color and Time and date color
the background for the mail and the task is controled by 4 binary keys
15 controls the right side of the screen horizontally
16 controls the right side of the screen horizontally
36 and 37 control the alternate lines horizonally respectivelly
for example if you want to sent the background to a gradient of red and yellow you do this
Binary_value 15= FF 00 00 00
Binary_value 16= FF FF 00 00
Binary_value 36= FF 00 00 00
Binary_value 37= FF FF 00 00
39 key controls the Start Menu Text Color
6 key controls the Today Screen separator lines
13 and 14 control the notification bubble color
27 controls the color of the font of the notification bubbles..
thats just some... I cant figure out which controls the message body background and text in Poutlook and TextMsg...
Keep on Hacking !!
-Christian
Hack the planet.

Here's a universal list of GSM codes which may or may not work on Cingular, and here's a page of registry tweaks.

yeah I have seen those... I was talking about new reg tweeks that people might have come up with since that thread was posted...
and on the GSM NET codes, for example...
Set: *35*barring code*16#[SEND]
Cancel: #35*barring code*16#[SEND]
I was talking about the barring code, if anyone knew some or something...
-Christian

Help! Camera crashed

what is the original value for
HKLM\SOFTWARE\HTC\Camera\P8\MainCamCaptSize value and
HKLM\SOFTWARE\HTC\Camera\P8\MainCamSupportCaptSize?
i tweaked it and it messed up the camera.
The camera app crashed when i take the photo in sports mode after the tweak

Hi....
here the values:
HKLM\SOFTWARE\HTC\Camera\P8\MainCamCaptSize = 64 as decimal
HKLM\SOFTWARE\HTC\Camera\P8\MainCamSupportCaptSize = 80 as decimal

Thanks bro!

[REQ] Panorama bg 4 manila 2.1(old) ?

Hio!
I read a lot of inquiries in German forums concerning a functioning panorama bg in manila2.1 (old) @ WM6.1 and I´m too
Now I have already brought in experience the following files for
portrait
67ea4038_manila
67fc58b9_manila
680e713a_manila
and this 4 landscape
6832a23c_manila
6844babd_manila
682089BB_manila
are needed.
Moreover, I have also understood like one from panorama pic 3 single pics have provided, as well as described HERE.
But I dont know if the size 512x512pix right 4 blackstone resolution or a better 800x800pix?!?
I have also read to the kind relatives contribution HERE about a panoramic bg 4 Sony X1.
However, I m demanded too much with many cabs and some attempts with cabs were fruitless.
I suppose I need only 2 files to the pictures say like they should be shown - manila or/and *.lua?!?
I dont need other features, only a pamorama bg 4 manila 2.1 12 tab´s.
Can anybody help me?
Thx 4 read and help
MaTT

I ask rotastrain with PM about my search and he need my unedit 5c9aa261_manila
Pls dont load this file down beside rotastrain himself!
Thx
.....to be continued

mmhh... he says he make it today but 14 days ago
somebody an idea how I can realise this?

matt_jackson said:
mmhh... he says he make it today but 14 days ago
somebody an idea how I can realise this?
Click to expand...
Click to collapse
Here ya go buddy. I'll need you to test this to get the screen position right. I only have a vga device, so I'm sort of guessing on the y-positions of the background. It's based off of my vga panoramic mod, which was improved greatly by thebootsman, and originally based off of rotastrain and NisseDILLIGAF's work . Please take screen shots of 1st tab (home) and the last tab (programs?). Do this for both portrait and landscape modes. Post them here at full size (or zip them up) for me. Also, this mod just uses the same 3 background files for both portrait and landscape (simpler that way, but once positions are figured out...it can be changed to have different pictures if you want). You only need 67ea4038_manila, 67fc58b9_manila, and 680e713a_manila (I included a 'hero' theme panoramic in the cab).

Hey many thanks 4 ur quick answer!
Now I´m @ work but I check ur cab @ afternoon and response u my experience

kk it is afternoon and I have test it
first touched panorama works!!!
Very n1 and cute - I love it
But one error, look @ this screen - it say more then 1000 words:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
u see the topbanner is from ur Hero panorama...
the wallpaper in untouched position are not the same from ur cab - thats my old wallpaper in all tabs. I have uninstall the HDwall but no change.
In attachment I uploaded my 3 original wallpaper (3x 800x512px =1536px).
I have the size from the original link.
Furthermore I has converted the pics as manilas (3x 512x512px).
I hope you can start with it something.
Big Thx!
MaTT

matt_jackson said:
kk it is afternoon and I have test it
first touched panorama works!!!
Very n1 and cute - I love it
But one error, look @ this screen - it say more then 1000 words:
u see the topbanner is from ur Hero panorama...
the wallpaper in untouched position are not the same from ur cab - thats my old wallpaper in all tabs. I have uninstall the HDwall but no change.
In attachment I uploaded my 3 original wallpaper (3x 800x512px =1536px).
I have the size from the original link.
Furthermore I has converted the pics as manilas (3x 512x512px).
I hope you can start with it something.
Big Thx!
MaTT
Click to expand...
Click to collapse
Ok, I've made some changes to hopefully move the unpressed panoramic image down. It should be pretty close, but may need further adjustment. If the image is displayed correctly on the left of the homescreen and the right-side of your last tab (ie all the way to the edges), please just take a screenshot of the same tab with the icon pressed and unpressed. It looks much better when they are both aligned. I've left the hero background in this cab just so it is easier to see where the edges are (black is hard since it's against a black background).

First of all one more many thanks for your help.
Because I just again @ work am I have sent u 4 topical screenshots. Should these be useless 4 u so I will make of course screenshots from the Herotheme.
Thx
MaTT

matt_jackson said:
First of all one more many thanks for your help.
Because I just again @ work am I have sent u 4 topical screenshots. Should these be useless 4 u so I will make of course screenshots from the Herotheme.
Thx
MaTT
Click to expand...
Click to collapse
Were those screenshots using the second cab I posted - 'blackstone manila 2.1 panorama 2.cab'? The unpressed looks about the same as your first screenshot, but it should be ~500 pixels lower assuming I changed the right values.
Also, go to the settings tab and choose the default wallpaper (it should ask when you press to change the wallpaper). I think this should get it to show up on the home tab unpressed.

removed duplicate post

kk
sry it was my mistake, I recognize not that u r change the cab
Here we r with the new screens
Another question: can u explain me what u edit?
many people @ german forums ask me about this solution, I think u edit this 2 manila and the lua (39...and 5c..)file?

matt_jackson said:
kk
sry it was my mistake, I recognize not that u r change the cab
Here we r with the new screens
Another question: can u explain me what u edit?
many people @ german forums ask me about this solution, I think u edit this 2 manila and the lua (39...and 5c..)file?
Click to expand...
Click to collapse
Ok, thanks for the screenshots. I think now we will only need 1 pressed/unpressed screenshot from the same tab (so only 2 screenshots). Please try the new test 3 cab attached to this post. I've included a different background since it's kind of hard to tell if the images overlap exactly with the blurry hero background.
To move the y-positions, you edit 5c9aa261_manila with m9editor. You will see panoramaBkg. This is the section of un-pressed images. The 3 panoramic files are as Panoram1.qtc, Panoram2.qtc, and Panoram3.qtc. There is a PosY value under "panoramaBkg". Decreasing this PosY value will move the picture lower (increase to move up). Further down, you will notice "panoramaBkg2" with Panoram1.qtc, Panoram2.qtc, and Panoram3.qtc listed below. This is the 'pressed' image. The same thing about y-positions applies.
3941bc49_manila.lua can be edited with a .txt editor. This is the panoramic background script. You can control the horizontal positions, as well as several other things. The horizontal position should be set since fine since it's controlled by Panosize. For WVGA, it's 696 pixels (800 -52 top taskbar -52 bottom softkeybar = 696). After you are done editing the .lua file, you need to open m9editor and go to directory containing 3941bc49_manila.lua and 3941bc49_manila. Then right-click on 3941bc49_manila and choose to 'compile and import'. This will make the changes you made on 3941bc49_manila.lua (decompiled script) into the actual .lua script (3941bc49_manila).
Also, if you'd like to get this working in landscape mode with the screen rotated, post some pressed/un-pressed screenshots. I've attached the panorama files that you use to change positions, etc. in the .zip. These are from the cab attached, so should be pretty close to fitting correctly.

m8 u r my H E R O!!!!
very very n1!
The difference is minimum
Thx 4 this detailed instructions - I looked afternoon @ my Home PC with all editors what u mean....
Dude if u need any grafics - contact me
BIG BIG Thx its looks so n1 *thumbs up*

matt_jackson said:
m8 u r my H E R O!!!!
very very n1!
The difference is minimum
Thx 4 this detailed instructions - I looked afternoon @ my Home PC with all editors what u mean....
Dude if u need any grafics - contact me
BIG BIG Thx its looks so n1 *thumbs up*
Click to expand...
Click to collapse
Would you mind taking your screenshots and adding them to a .zip and attaching it here? I think the forums are re-sizing the pics and they are not the the same sizes (252x420 and 265x442). It'd be easier with just 2 800x480 pictures to make sure it is aligned just right. Thanks

sure np
up and away

matt_jackson said:
sure np
up and away
Click to expand...
Click to collapse
Here's another to try. If it's off, just post the program tab screens pressed and unpressed as before in a .zip.

mhh... nothing is change
but the difference is so small - I can live with this
Here the results:
YOUTUBE

matt_jackson said:
mhh... nothing is change
but the difference is so small - I can live with this
Here the results:
YOUTUBE
Click to expand...
Click to collapse
Sorry, I forgot to change the y-position in the .lua file...so it was still the old value. Please try the attached if you'd like. I think it should be right. The cab only contains the updated manila lua files, so it will keep your current background. The zip contains the 3 files needed for the mod (image manila files not included) so that you have them.

Sry no - this one go up...
The pressed images r right, the unpressed images must move up.
If I understand ur tutorial right I must edit the 5c9aa261_manila (panoramaBkg (unpressed)) 4 vertical movement?
panoramaBkg PosY=72
panoramaBkg2 PosY=77 is this right or must this the same value?
But u have me @ last post change the 3941bc49_manila...
I´m confused
I look @ ur 3 3941bc49_manila.lua with my editor and see u have edit
PanoWidth = Panosize * 3 - 1
to
PanoWidth = Panosize * 3 - 5
what did this value edit?

matt_jackson said:
Sry no - this one go up...
The pressed images r right, the unpressed images must move up.
If I understand ur tutorial right I must edit the 5c9aa261_manila (panoramaBkg (unpressed)) 4 vertical movement?
panoramaBkg PosY=72
panoramaBkg2 PosY=77 is this right or must this the same value?
But u have me @ last post change the 3941bc49_manila...
I´m confused
I look @ ur 3 3941bc49_manila.lua with my editor and see u have edit
PanoWidth = Panosize * 3 - 1
to
PanoWidth = Panosize * 3 - 5
what did this value edit?
Click to expand...
Click to collapse
It is probably easier for you to make the final adjustments and get it aligned correctly. I'll try to explain how to change the position as best as I can.
5c9aa261_manila is the mode9 file that contains the references to the panorama script and background files use. "panoramaBkg" is the un-pressed image. The PosY value controls the y-axis of the panoramic images. Decreasing the value moves it down, while increasing moves it up.
"panoramaBkg2" is the pressed image. The PosY value works the same as "panoramaBkg" to move the image, but they do not line up if the same numbers are used because of other PosY values above the panoramaBkg2 PosY value (at least that's what I think). You can move either "panoramaBkg" or "panoramaBkg2" to get them to line up correctly. If pressed image does not seem to fill the screen (ie there is a blank spot at the top), adjust "panoramaBkg" so that it appropriately (ie move it up). The same goes for the pressed image if it appears off.
3941bc49_manila is the panoramic script. 3941bc49_manila.lua is the decompiled script that you can edit with a text editor. The code below contains the information for portrait or landscape modes. If you are only going to use portrait mode, you can delete the entire text shown below to make it simpler.
Code:
if _application.Orientation == ScreenOrientation_Portrait then
Panosize = 696
panoramaBkg2.Position.y = 80
else
Panosize = 376
panoramaBkg2.Position.y = 82
end
If you would like to use landscape, you will need to adjust the line "panoramaBkg2.Position.y = 82" to get the pressed image lined up with the un-pressed image. Also, if you make a PosY change to "panoramaBkg2" in the mode9 file (5c9aa261_manila), you will need to input the same value in the "panoramaBkg2.Position.y = 80" line. The panosize is the size of the 512x512 picture you use to create panoramic image. It is 696 for portrait (800 - 52 - 52 = 696). The taskbars are each 52 pixels and your wvga screen is 800 pixels. For landscape, it reduces to 376 (480 - 52 - 52 = 376).
The code below just controls the size and x-position of the 6 images used for the panoramic images (3 for pressed, 3 for un-pressed). You do not need to change anything.
Code:
panoramaBkg.Position.y = Panosize
BackGround1.Size.width = Panosize
BackGround2.Size.width = Panosize
BackGround2.Position.x = Panosize
BackGround3.Size.width = Panosize
BackGround3.Position.x = Panosize * 2
BackGround4.Size.width = Panosize
BackGround5.Size.width = Panosize
BackGround5.Position.x = Panosize
BackGround6.Size.width = Panosize
BackGround6.Position.x = Panosize * 2
BackGround1.Size.height = Panosize
BackGround2.Size.height = Panosize
BackGround3.Size.height = Panosize
BackGround4.Size.height = Panosize
BackGround5.Size.height = Panosize
BackGround6.Size.height = Panosize
The code below controls the width of the panoramic image (so that it adjusts to the number of tabs you have present).
Code:
T = screenWidth - sliderWidth
PanoWidth = Panosize * 3 - 5
panoramaBkg2.Opacity.value = 100
panoramaBkg.Position.x = math.floor((selector.Position.x - correction) * (- (PanoWidth - screenWidth) / T))
panoramaBkg2.Position.x = math.floor((selector.Position.x - correction) * (- (PanoWidth - screenWidth) / T))
The "PanoWidth = Panosize * 3 - 5" line controls how far the image stretches to the right. This should just be 3 * the panoramic size used (696 pixels for portrait). However, it does not always display as the numbers should. If you see any black space on the far right edge of your panoramic image (on last tf3d tab), you can move the image to the right by making the "PanoWidth" value smaller (by subtracting 5 in this case). If it looks like your panoramic image is getting cut off on the last tf3d tab, you just need to make the "PanoWidth" value larger.
Those are the main portions of the script and mode9 file. The only things needed to adjust PosY are below "panoramaBkg" or "panoramaBkg2". If you change "panoramaBkg2", make sure to change the corresponding value in 3941bc49_manila.lua. To change X position, just adjust the "PanoWidth" line in 3941bc49_manila.lua.
After you've edited 3941bc49_manila.lua, use m9editor to compile and import the actual manila script (3941bc49_manila). Then just copy to your device and test the new values.

[Q] New Keyboard needed for the HD MINI please

Hy guys,
i'm searching for a new keyboard to install in the HD MINI
i have the stock ROM WM 6.5. Italian language.
i don't like the qwerty actually installed, beacause the buttons are too little... and there isn't a switch button to change to the compact one(is it possible? only qwerty is supported?)
How can i do to improve it?
Let me know.
P.s.
sorry for my english thanks soo much

hi,
go in settings to change to compact mode,or use SPB Full Screen Keyboard

tzacapaca
If you can give a link to this skin under our permission for for SPB Keyboard

tzacapaca said:
hi,
go in settings to change to compact mode,or use SPB Full Screen Keyboard
tzacapaca post this skin if you have it i tryed several skins for spb keyboard and not working for me thx
Click to expand...
Click to collapse

New Keyboard needed for the HD MINI
countergokou said:
Hy guys,
i'm searching for a new keyboard to install in the HD MINI
Click to expand...
Click to collapse
try and use this New HVGA FingerKeyboard2 v2.1
also you can add your desired Lang
http://forum.xda-developers.com/showpost.php?p=11931706&postcount=2085

How can we add our desired language? I asked you here http://forum.xda-developers.com/showpost.php?p=12001712&postcount=2 but you haven't replied. Any help please?

it's a simple work !
zalaros said:
How can we add our desired language? I asked you here http://forum.xda-developers.com/showpost.php?p=12001712&postcount=2 but you haven't replied. Any help please?
Click to expand...
Click to collapse
Dear zalaros
unfortunately i don't have any imagination from your lang and it's layout ,...but it is a simple work to input your own nice lang character.
please use skin-02-hvga-port-01-English.txt as a sample for your portrait skins,both skin-02-hvga-port-02-grk.txt and skin-02-hvga-port-03-grksms.txt,change it's [red] characters,like here
Code:
ResolutionBegin 320 480
LayoutBegin [COLOR="Red"]English[/COLOR]
DisplayName [COLOR="Red"]EN[/COLOR]
Draw 0 0 320 232 background
FontNormal normal
FontHold hold
FontSelected selected
FontSelectedHold selhold
Key [COLOR="Blue"]1 5 30 51 1,1,5,1 key1 key3[/COLOR] [COLOR="Red"]q[/COLOR],[COLOR="Red"]1[/COLOR],[COLOR="Red"]Q[/COLOR],[COLOR="Red"]1[/COLOR] SC:[COLOR="Red"]q[/COLOR],SC:[COLOR="Red"]1[/COLOR],SC:[COLOR="Red"]Q[/COLOR],SC:[COLOR="Red"]1[/COLOR]
Key [COLOR="Blue"]33 5 30 51 1,1,5,1 key1 key3[/COLOR] [COLOR="Red"]w[/COLOR],[COLOR="Red"]2[/COLOR],[COLOR="Red"]W[/COLOR],[COLOR="Red"]2[/COLOR] SC:[COLOR="Red"]w[/COLOR],SC:[COLOR="Red"]2[/COLOR],SC:[COLOR="Red"]W[/COLOR],SC:[COLOR="Red"]2[/COLOR]
...........
please,don't change [blue] char and do this again whit skin-02-hvga-land-01-English.txt as a sample to create your 2 other lang landscape skins
you can add or delete any key to configure your layout
...

sam-2007 said:
Dear zalaros
unfortunately i don't have any imagination from your lang and it's layout ,...but it is a simple work to input your own nice lang character.
please use skin-02-hvga-port-01-English.txt as a sample for your portrait skins,both skin-02-hvga-port-02-grk.txt and skin-02-hvga-port-03-grksms.txt,change it's [red] characters,like here
Code:
ResolutionBegin 320 480
LayoutBegin [COLOR="Red"]English[/COLOR]
DisplayName [COLOR="Red"]EN[/COLOR]
Draw 0 0 320 232 background
FontNormal normal
FontHold hold
FontSelected selected
FontSelectedHold selhold
Key [COLOR="Blue"]1 5 30 51 1,1,5,1 key1 key3[/COLOR] [COLOR="Red"]q[/COLOR],[COLOR="Red"]1[/COLOR],[COLOR="Red"]Q[/COLOR],[COLOR="Red"]1[/COLOR] SC:[COLOR="Red"]q[/COLOR],SC:[COLOR="Red"]1[/COLOR],SC:[COLOR="Red"]Q[/COLOR],SC:[COLOR="Red"]1[/COLOR]
Key [COLOR="Blue"]33 5 30 51 1,1,5,1 key1 key3[/COLOR] [COLOR="Red"]w[/COLOR],[COLOR="Red"]2[/COLOR],[COLOR="Red"]W[/COLOR],[COLOR="Red"]2[/COLOR] SC:[COLOR="Red"]w[/COLOR],SC:[COLOR="Red"]2[/COLOR],SC:[COLOR="Red"]W[/COLOR],SC:[COLOR="Red"]2[/COLOR]
...........
please,don't change [blue] char and do this again whit skin-02-hvga-land-01-English.txt as a sample to create your 2 other lang landscape skins
you can add or delete any key to configure your layout
...
Click to expand...
Click to collapse
Thank you very much for your help What about "Select All, Cut, Copy, Paste"? How can we add them?

[Q] Help for disable trackpad sensor

Hello to all.
Could somebody here tell me the way ton disable the trackpad sensor on my HTC desire Z??
1 year ago, it began to act on itself, without manual action, as if somebody else was playing with it.... : hard to write any sms because of the permanent moving cursor, and many examples very annoying for any situations.
"I don't believe in ghosts, anyway" was singing The Opposition in 1984,....and so do i.
I don't have any use of this trackpad, except its backlight when charging or missed calls (i'd like to conserve this notification backlight if possible).
The problem is the same since i rooted my phone, on oxygen, cyanogenmod and Jelly baby, so it seems to be a hardware malfunction.
I have looked after all xda forums on this subject, before posting my question here.
Just one talk about editing "vision-keypad-fra.kl" located in : System>usr>keylayout... and no more.
Here is mine:
# Copyright (C) 2010 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Generic key layout file for full alphabetic US English PC style external keyboards.
#
# This file is intentionally very generic and is intended to support a broad rang of keyboards.
# Do not edit the generic key layout to support a specific keyboard; instead, create
# a new key layout file with the required keyboard configuration.
#
key 1 ESCAPE
key 2 1
key 3 2
key 4 3
key 5 4
key 6 5
key 7 6
key 8 7
key 9 8
key 10 9
key 11 0
key 12 MINUS
key 13 EQUALS
key 14 DEL
key 15 TAB
key 16 Q
key 17 W
key 18 E
key 19 R
key 20 T
key 21 Y
key 22 U
key 23 I
key 24 O
key 25 P
key 26 LEFT_BRACKET
key 27 RIGHT_BRACKET
key 28 ENTER
key 29 CTRL_LEFT
key 30 A
key 31 S
key 32 D
key 33 F
key 34 G
key 35 H
key 36 J
key 37 K
key 38 L
key 39 SEMICOLON
key 40 APOSTROPHE
key 41 GRAVE
key 42 SHIFT_LEFT
key 43 BACKSLASH
key 44 Z
key 45 X
key 46 C
key 47 V
key 48 B
key 49 N
key 50 M
key 51 COMMA
key 52 PERIOD
key 53 SLASH
key 54 SHIFT_RIGHT
key 55 NUMPAD_MULTIPLY
key 56 ALT_LEFT
key 57 SPACE
key 58 CAPS_LOCK
key 59 F1
key 60 F2
key 61 F3
key 62 F4
key 63 F5
key 64 F6
key 65 F7
key 66 F8
key 67 F9
key 68 F10
key 69 NUM_LOCK
key 70 SCROLL_LOCK
key 71 NUMPAD_7
key 72 NUMPAD_8
key 73 NUMPAD_9
key 74 NUMPAD_SUBTRACT
key 75 NUMPAD_4
key 76 NUMPAD_5
key 77 NUMPAD_6
key 78 NUMPAD_ADD
key 79 NUMPAD_1
key 80 NUMPAD_2
key 81 NUMPAD_3
key 82 NUMPAD_0
key 83 NUMPAD_DOT
# key 84 (undefined)
# key 85 "KEY_ZENKAKUHANKAKU"
key 86 BACKSLASH
key 87 F11
key 88 F12
# key 89 "KEY_RO"
# key 90 "KEY_KATAKANA"
# key 91 "KEY_HIRAGANA"
# key 92 "KEY_HENKAN"
# key 93 "KEY_KATAKANAHIRAGANA"
# key 94 "KEY_MUHENKAN"
key 95 NUMPAD_COMMA
key 96 NUMPAD_ENTER
key 97 CTRL_RIGHT
key 98 NUMPAD_DIVIDE
key 99 SYSRQ
key 100 ALT_RIGHT
# key 101 "KEY_LINEFEED"
key 102 MOVE_HOME
key 103 DPAD_UP
key 104 PAGE_UP
key 105 DPAD_LEFT
key 106 DPAD_RIGHT
key 107 MOVE_END
key 108 DPAD_DOWN
key 109 PAGE_DOWN
key 110 INSERT
key 111 FORWARD_DEL
# key 112 "KEY_MACRO"
key 113 VOLUME_MUTE
key 114 VOLUME_DOWN
key 115 VOLUME_UP
key 116 POWER WAKE
key 117 NUMPAD_EQUALS
# key 118 "KEY_KPPLUSMINUS"
key 119 BREAK
# key 120 (undefined)
key 121 NUMPAD_COMMA
# key 122 "KEY_HANGEUL"
# key 123 "KEY_HANJA"
# key 124 "KEY_YEN"
key 125 META_LEFT
key 126 META_RIGHT
key 127 MENU WAKE_DROPPED
key 128 MEDIA_STOP
# key 129 "KEY_AGAIN"
# key 130 "KEY_PROPS"
# key 131 "KEY_UNDO"
# key 132 "KEY_FRONT"
# key 133 "KEY_COPY"
# key 134 "KEY_OPEN"
# key 135 "KEY_PASTE"
# key 136 "KEY_FIND"
# key 137 "KEY_CUT"
# key 138 "KEY_HELP"
key 139 MENU WAKE_DROPPED
# key 140 "KEY_CALC"
# key 141 "KEY_SETUP"
key 142 POWER WAKE
key 143 POWER WAKE
# key 144 "KEY_FILE"
# key 145 "KEY_SENDFILE"
# key 146 "KEY_DELETEFILE"
# key 147 "KEY_XFER"
# key 148 "KEY_PROG1"
# key 149 "KEY_PROG2"
key 150 EXPLORER
# key 151 "KEY_MSDOS"
key 152 POWER WAKE
# key 153 "KEY_DIRECTION"
# key 154 "KEY_CYCLEWINDOWS"
key 155 ENVELOPE
key 156 BOOKMARK
# key 157 "KEY_COMPUTER"
key 158 BACK WAKE_DROPPED
key 159 FORWARD
key 160 MEDIA_CLOSE
key 161 MEDIA_EJECT
key 162 MEDIA_EJECT
key 163 MEDIA_NEXT
key 164 MEDIA_PLAY_PAUSE
key 165 MEDIA_PREVIOUS
key 166 MEDIA_STOP
key 167 MEDIA_RECORD
key 168 MEDIA_REWIND
key 169 CALL
# key 170 "KEY_ISO"
# key 171 "KEY_CONFIG"
key 172 HOME
# key 173 "KEY_REFRESH"
# key 174 "KEY_EXIT"
# key 175 "KEY_MOVE"
# key 176 "KEY_EDIT"
key 177 PAGE_UP
key 178 PAGE_DOWN
key 179 NUMPAD_LEFT_PAREN
key 180 NUMPAD_RIGHT_PAREN
# key 181 "KEY_NEW"
# key 182 "KEY_REDO"
# key 183 F13
# key 184 F14
# key 185 F15
# key 186 F16
# key 187 F17
# key 188 F18
# key 189 F19
# key 190 F20
# key 191 F21
# key 192 F22
# key 193 F23
# key 194 F24
# key 195 (undefined)
# key 196 (undefined)
# key 197 (undefined)
# key 198 (undefined)
# key 199 (undefined)
key 200 MEDIA_PLAY
key 201 MEDIA_PAUSE
# key 202 "KEY_PROG3"
# key 203 "KEY_PROG4"
# key 204 (undefined)
# key 205 "KEY_SUSPEND"
# key 206 "KEY_CLOSE"
key 207 MEDIA_PLAY
key 208 MEDIA_FAST_FORWARD
# key 209 "KEY_BASSBOOST"
# key 210 "KEY_PRINT"
key 211 FOCUS
key 212 CAMERA
# key 213 "KEY_SOUND"
# tempEdit for ? button
key 214 BUTTON_R2
key 215 AT
# key 216 "KEY_CHAT"
key 217 SEARCH
# key 218 "KEY_CONNECT"
# key 219 "KEY_FINANCE"
# key 220 "KEY_SPORT"
# key 221 "KEY_SHOP"
# key 222 "KEY_ALTERASE"
# key 223 "KEY_CANCEL"
# key 224 "KEY_BRIGHTNESSDOWN"
# key 225 "KEY_BRIGHTNESSUP"
key 226 HEADSETHOOK
key 256 BUTTON_1
key 257 BUTTON_2
key 258 BUTTON_3
key 259 BUTTON_4
key 260 BUTTON_5
key 261 BUTTON_6
key 262 BUTTON_7
key 263 BUTTON_8
key 264 BUTTON_9
key 265 BUTTON_10
key 266 BUTTON_11
key 267 BUTTON_12
key 268 BUTTON_13
key 269 BUTTON_14
key 270 BUTTON_15
key 271 BUTTON_16
key 288 BUTTON_1
key 289 BUTTON_2
key 290 BUTTON_3
key 291 BUTTON_4
key 292 BUTTON_5
key 293 BUTTON_6
key 294 BUTTON_7
key 295 BUTTON_8
key 296 BUTTON_9
key 297 BUTTON_10
key 298 BUTTON_11
key 299 BUTTON_12
key 300 BUTTON_13
key 301 BUTTON_14
key 302 BUTTON_15
key 303 BUTTON_16
key 304 BUTTON_A
key 305 BUTTON_B
key 306 BUTTON_C
key 307 BUTTON_X
key 308 BUTTON_Y
key 309 BUTTON_Z
key 310 BUTTON_L1
key 311 BUTTON_R1
key 312 BUTTON_L2
key 313 BUTTON_R2
key 314 BUTTON_SELECT
key 315 BUTTON_START
key 316 BUTTON_MODE
key 317 BUTTON_THUMBL
key 318 BUTTON_THUMBR
# key 352 "KEY_OK"
# key 353 "KEY_SELECT"
# key 354 "KEY_GOTO"
# key 355 "KEY_CLEAR"
# key 356 "KEY_POWER2"
# key 357 "KEY_OPTION"
# key 358 "KEY_INFO"
# key 359 "KEY_TIME"
# key 360 "KEY_VENDOR"
# key 361 "KEY_ARCHIVE"
key 362 GUIDE
# key 363 "KEY_CHANNEL"
# key 364 "KEY_FAVORITES"
# key 365 "KEY_EPG"
key 366 DVR
# key 367 "KEY_MHP"
# key 368 "KEY_LANGUAGE"
# key 369 "KEY_TITLE"
# key 370 "KEY_SUBTITLE"
# key 371 "KEY_ANGLE"
# key 372 "KEY_ZOOM"
# key 373 "KEY_MODE"
# key 374 "KEY_KEYBOARD"
# key 375 "KEY_SCREEN"
# key 376 "KEY_PC"
key 377 TV
# key 378 "KEY_TV2"
# key 379 "KEY_VCR"
# key 380 "KEY_VCR2"
# key 381 "KEY_SAT"
# key 382 "KEY_SAT2"
# key 383 "KEY_CD"
# key 384 "KEY_TAPE"
# key 385 "KEY_RADIO"
# key 386 "KEY_TUNER"
# key 387 "KEY_PLAYER"
# key 388 "KEY_TEXT"
# key 389 "KEY_DVD"
# key 390 "KEY_AUX"
# key 391 "KEY_MP3"
# key 392 "KEY_AUDIO"
# key 393 "KEY_VIDEO"
# key 394 "KEY_DIRECTORY"
# key 395 "KEY_LIST"
# key 396 "KEY_MEMO"
# key 397 "KEY_CALENDAR"
# key 398 "KEY_RED"
# key 399 "KEY_GREEN"
# key 400 "KEY_YELLOW"
# key 401 "KEY_BLUE"
key 402 CHANNEL_UP
key 403 CHANNEL_DOWN
# key 404 "KEY_FIRST"
# key 405 "KEY_LAST"
# key 406 "KEY_AB"
# key 407 "KEY_NEXT"
# key 408 "KEY_RESTART"
# key 409 "KEY_SLOW"
# key 410 "KEY_SHUFFLE"
# key 411 "KEY_BREAK"
# key 412 "KEY_PREVIOUS"
# key 413 "KEY_DIGITS"
# key 414 "KEY_TEEN"
# key 415 "KEY_TWEN"
# key 448 "KEY_DEL_EOL"
# key 449 "KEY_DEL_EOS"
# key 450 "KEY_INS_LINE"
# key 451 "KEY_DEL_LINE"
key 464 FUNCTION
key 465 ESCAPE FUNCTION
key 466 F1 FUNCTION
key 467 F2 FUNCTION
key 468 F3 FUNCTION
key 469 F4 FUNCTION
key 470 F5 FUNCTION
key 471 F6 FUNCTION
key 472 F7 FUNCTION
key 473 F8 FUNCTION
key 474 F9 FUNCTION
key 475 F10 FUNCTION
key 476 F11 FUNCTION
key 477 F12 FUNCTION
key 478 1 FUNCTION
key 479 2 FUNCTION
key 480 D FUNCTION
key 481 E FUNCTION
key 482 F FUNCTION
key 483 S FUNCTION
key 484 B FUNCTION
# key 497 KEY_BRL_DOT1
# key 498 KEY_BRL_DOT2
# key 499 KEY_BRL_DOT3
# key 500 KEY_BRL_DOT4
# key 501 KEY_BRL_DOT5
# key 502 KEY_BRL_DOT6
# key 503 KEY_BRL_DOT7
# key 504 KEY_BRL_DOT8
# Joystick and game controller axes.
# Axes that are not mapped will be assigned generic axis numbers by the input subsystem.
axis 0x00 X
axis 0x01 Y
axis 0x02 Z
axis 0x03 RX
axis 0x04 RY
axis 0x05 RZ
axis 0x06 THROTTLE
axis 0x07 RUDDER
axis 0x08 WHEEL
axis 0x09 GAS
axis 0x0a BRAKE
axis 0x10 HAT_X
axis 0x11 HAT_Y
I don't know what line to modify.....
Or are there any available app to turn of this sensor ?
If anyone had a solution, i would be relieve. Thanks
Sorry if my question is posted on a wrong forum.
And sorry for my very bad english, i do my best, i'm french...

Anybody here ???

bibole said:
Anybody here ???
Click to expand...
Click to collapse
Sorry man, this is a hard one. I looked through the sources, but I reckon the trackpad won't be in the keylayout files at all. It might be related to the touchscreen or something. I'll keep looking for you, but you might be unlucky and it might be hardcoded in such a way that makes it difficult to edit unlike the keylayout.

HTCDreamOn said:
Sorry man, this is a hard one. I looked through the sources, but I reckon the trackpad won't be in the keylayout files at all. It might be related to the touchscreen or something. I'll keep looking for you, but you might be unlucky and it might be hardcoded in such a way that makes it difficult to edit unlike the keylayout.
Click to expand...
Click to collapse
Thanks for your answer HTCDreamOn.
I was afraid that no line was corresponding to the trackpad sensor....... and you confirmed that.
If you see any solution for my problem, it would be coll ! (PimpmyROM doesn't offer this tweak...)