Related
hiya
has anyone got this working on their Tytn?
http://www.touch-commander.com/
particularly MDA II WM6
There are other threads on this topic. Check it out.
yes in Trinity WM6 but not in Hermes
EDIT: ok found something in development and hacking, will have a looksy
rickyjune said:
yes in Trinity WM6 but not in Hermes
EDIT: ok found something in development and hacking, will have a looksy
Click to expand...
Click to collapse
No.. It's working 100% on my i-mate JasJam.. I even have FtouchFlo installed and they work together perfectly after adding Execlude line in FTouchFlo config file
I'm running WM6 (Schap's 3.6)
lots of defect still there. way to go
Seems to work OK on my TyTN. Will continue to test.
Interesting app - lost of others have been trying to get the same thing done with limited success it would seem.
Doesn't work on my Hermes!
No Problems. It is working as expected.
I just installed it, and it is working very well and in combination with FTouchFlo, now i have a real touchflo cube that is perfectly configurabel.
i'am running shaps 3.54b GER ROM
cheerrs,
chaos42
work OK on my TyTN how can i work also and touch flo ?
I have tested touch commander on my HTC hermes. It's give a new way of navigation and you can program your own shortcuts
i have this application it is better that flash cube!!
but still it should assign to a button so i thought maybe with FTouchFlo it could be launch from screen.
any idea how to set FTouchFlo to launch touch commander?
edit the config file FTouchFloConfig.txt
DownUpApp: /Program Files/touchcommander.exe
DownUpAppCmdLine:
and it will work
yes i did it it is very cool, and faster start up with touch commander.
also i put TouchFlo shortcut in startup so even after soft reset it would work.
No luck with mine. After uninstalling, I get a message stating it's looking for touch commander.exe when I press the messaging button. I checked the button assignments in setting and button 1 is set for messaging.
Haven't found a fix yet, but that's a report on what I discovered.
New version Touch Commander 3.0
http://forum.xda-developers.com/showthread.php?t=375111
installing now, will let you know
Nah, not working 100% on my hermes. Looks promising for the future once its being tweaked a bit
HELP
I purchased the 3.0 and it has soooooo many bugs and things I didn't wan that just sucked the life out of my device like battery indicator and htc home screen ect.....then I downloaded the new 3.1 which said it fixed the bugs I had complained about but didnt and in fact made my device crash so I had to hard reset. How I was suggested by their customer support to download an ealier version so I downloaded 2.0. It is exactly what I wanted and I am so happy but now I cannot register it. My registration code doesn't work for the 2.0.
My question to all of you on here is if anyone is interested in switching registration codes???? I will give you this code for 3.0 which also works for 3.1 if you give me your code for 2.0. I have contacted their support asking them for one with no response. I need this ASAP!!! Thanks and just shoot me a message if your interested!!!
So basically your asking someone for a code to version 2 which works in turn for a code for versions 3.0 & 3.1 which don't
Update Touch Commander 3.1
Update Touch Commander 3.1
Fingertip control for Pocket PC Phone like HTC TouchFLO.
http://forum.xda-developers.com/showthread.php?t=375111
I have tried this hack on the MAKUU wm6.1 beta6 "pure" and on the Lennysh wm6.1 beta 2.1 preview for my Dell Axim x51v.
See thread here: http://forum.lennysh.com/showthread.php?t=182
Basically you need the fake phone/sms DLL hack before installing the HTC plugin.
All files found here on XDA-Devs, but forgot where. So cred to the devs that first posted the files. Found clue for hack in the "Midlet Bible" by Menneisyys.
Also the HTC Home Plugin Customizer v1.0 Final found here works great!!
-NonPaq
Update: LennySH was kind enough to combine a version of HTC Home Plugin VGA with the two DLLs included in a cab for quick and easy installation. See Post #15 for Download.
thank you very much spent a lot of time on trying to get this work
@all
you need to put the dll files in windows folder..
Awesome! Man, I've been looking for ways to get it to work. I gave up and instead, used lrToday with my own clock skin. Now, I can truly get rid of that and try this. Thanks for posting this solution!
Just reflashed with LennySH edition (2.1) and I'm having problems customizing with Home Plugin Customizer v1.0. It goes through all the options, but saving does not change the plugin. I know this used to work (just look at the image). Let me know if you able to change the configurations.
BTW, is this the best "VGA version" of the plugin? The text is very small.
Dont know what I did other than reinstalling the Homeplug, but now the HTC Home Customizer works.
I experimented with installing PocketCM again (scrolling contacts). Previously, the application would immediately bomb out with missing component error. This time it actually ran!! Unfortunately its immediately closing down after loading the contacts, but at the PCM forums it appears to be a wm6.1 problem.
Looks like these fake DLLs may also allow other phone apps to now work on our non-phone Axim. (perhaps even other non-phone devices).
(I changed Homeplug to transparent backgroung, iphone icons, and silver streak clock. All auto downloaded with HTC Home Customizer.)
nonpaq
Mine doesn't work. I copied the dll files over to the Windows directory. Installed the cab file and all it shows on my Today Screen is a line separated where the HTC Home Plugin should be. BTW - haven't install the customizer yet.
Running makuu's pure 6.1 rom.
mphayvanh said:
nonpaq
Mine doesn't work. I copied the dll files over to the Windows directory. Installed the cab file and all it shows on my Today Screen is a line separated where the HTC Home Plugin should be. BTW - haven't install the customizer yet.
Running makuu's pure 6.1 rom.
Click to expand...
Click to collapse
I originally did this on Makuu's 6.1 pure, so I dont know what is happening. Did you reboot after install? I never did not try it in RealVGA mode however.
Pst... btw, Makuu "leaked" that he will be releasing a new rom with HomePlug built in. My discovery may just be too little too late for Makuu fans.
It will not have the plugin built in, but it will support the installation natively without any tricks. I'll post the link to the rom in few minutes.
Not sure why it's not working. Maybe I'll wait for Makuu's next release. I'll stick with Moble Shell 2 for now. Thanks.
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
I wouldn't like to hard reset ...
miljbee said:
Does it works on WM6 ? (Not 6.1)
My X51v runs the Makuu WM6 FR, and I Wanted to try this homme plug for a long time.
I wouldn't like to hard reset ...
Click to expand...
Click to collapse
http://www.ppccool.com/index.php?showtopic=8352
it is a very nice looking plugin, but is it possible to change the tabs like contacts to another launcher?
If 2 or 3 tabs (on a total of 6) aren't usefull on a non-phone device, I won't have it on mine.
ok worked until I changed the theme color with mobile shell 2.. now only a seperator and free space where the plugin should be.. but I think there are better programs out there right now especially ultimate launcher
Attached is a modified cab install for the two attachments in the 1st post. Although this is the older version, I'm at work and can't post a newer version of HTC Home so I decided to go ahead and post this one for people not comfortable with copying files. Just install this cab, and soft reset.
Is there any way that the plugin grows a little bit because it is too small!
I found a great cab in Kaiserforum for a larger Startmenu.
Its not like HTC-enlargestartmenu and is really fingerfriendly.
Works smooth and without any problem sinice 2 month, I dont want to miss anymore.
Only problem:
On my Hermes with WM6.0 it closes with an error when I slide out hardwarekeyboard (error: cant open file....no certificate or some components not found....blablabla.......)
I´m searching for this little program (touchstartmenu.cab) wich works in landscape too.
Anyone knows where the cab is from? (Touchstartmenu.cab) maybe the developer of this cab can help. (searched up and down and asked the poster in kaiserforum too, but got no answer)
here is a screenshoot :
Its from Touch Commander, which is not freeware.
Surur
Thanks.
(I thought Touch Commander is a cube programm, as I see now, this is only the start menu part of this programm)
did try the trial of Touch commander 3.2 and my Hermes (WM6.0) got very slow. Not recommendable, there are other programs around, that do the job much better.
But I really like the "Start menu " part. In TC 3.2 I can switch to only use that, and disable the cube, ect., but it still slow down my Hermes.
So I have to keep searching for a similar little program (like touchstartmenu.cab) wich works in landscape too.
Instead of disabling parts, you can actually choose which parts to install when you first run the cab file.
I only use the start menu and the task manager from it, and then I run SPB MobileShell as well, rather than using the cube.
Start menu didn't work properly for me with PDACorner V27. It wouldn't open the programs or settings. Could be that I was loading it on to a system with a large number of 3rd party apps and it may have had a software conflict so might try again on a "virgin" system...Later....
Anyone here use Logmein.com for remote desktop? I can't seem to get it to work.
if it's like on my hermes, logmein only works with PIE...Pocket Internet Explorer
No way to make it work with opera browser
The first time you log in with PIE it will suggest to install a .cab and next time you will log in you will be able to see your PC desktop...
hope this helps
Yeah, I installed the CAB but from PIE it refuses to launch the app when I log into the computer. Anyone else have this issue? I'm guessing it may require a patch or something.
whtrbt7 said:
Yeah, I installed the CAB but from PIE it refuses to launch the app when I log into the computer. Anyone else have this issue? I'm guessing it may require a patch or something.
Click to expand...
Click to collapse
did you perform a soft reset after cab install?
did you check your logmein psw?
sorry, no other ideas...
I'm also looking for a solution. I think something changed in Internet Explorer and doesn't load Logmein plugin.
try another free vnp solution...like net.viewer or REALVNC FREE
I have also problems with LMI
I am a long term LogMeIn user and I have also problems with my TP2. I can get to the point where I can choose Remote Control from the list but after that nothing happens. I have tried everything with cab installation - for nohing.
I had HTC Touch Pro earlier and it had some issues, too. I could establish a connection to remote desktop but I could not authenticate.
Before TP I had TyTN II and it worked fine. I have also have Qtek 2020, Qtek 9090, Qtek 9000 and HTC Advantage x7500 and they have also worked OK.
If someone can help us with this, it would be the greatest!!!
I'm bumping this up again to see if anyone has issues with Logmein.com . So far there is no fix. I think PIE isn't referencing the remote app so you can't even authenticate. Anyone have any ideas?
I had the same issue - and I was assuming it was because of the new IE - Logmein needs to fix its viewer to work with new IE
CHfish
OK, I found a fix. We need to download IE Toggle 1.1 and then set up IE to run as PIE. This will downgrade the browser and it will allow Logmein to work. Unfortunately I lost the link to the file so please google it.
OK, here's the fix link. Apparently people that had IE issues had the same problem.
http://discussion.treocentral.com/treo-pro/177752-toggle-between-pie-ie6-free-app-cab-file.html
whtrbt7 said:
OK, here's the fix link. Apparently people that had IE issues had the same problem.
http://discussion.treocentral.com/treo-pro/177752-toggle-between-pie-ie6-free-app-cab-file.html
Click to expand...
Click to collapse
Can you upload elsewhere please mate, would save everyone having to register with treocentral.
thanks,
Beasty
NP,
Here's the file everyone ^_^
http://www.megaupload.com/?d=W8D60G9N
Thanks, downloaded and uploaded to the tweaks thread.
Cheers,
Beasty
Have you got LMI working now on the TP2? I am particularly interested in remote desktopping for support reasons.
If so... How effective is it?
I also have an enquiry open with LMI.
Thanks,
Sam
SamJolly said:
Have you got LMI working now on the TP2? I am particularly interested in remote desktopping for support reasons.
If so... How effective is it?
I also have an enquiry open with LMI.
Thanks,
Sam
Click to expand...
Click to collapse
Urm, yeah - as above, credit to whtrbt7for providing solution. LMI on WM is free, so try it for yourself!
Credit should go to Codyppc on treocentral forums since he developed the IE Toggle app. It fully works after you've followed my directions.
I have a wierd problem with logme in. I installed IE Toggle and was running IE under PIE mode. Log Me in loaded fine and it even came with username/password screen on Win Server 2003 R2. When I try to enter my password through the QWERTY keyboard, nothing types in the password screen. Backspace works but it will not let me type anything in the password screen.
You seem to be having the keyboard issue that some users have. Here's the fix:
use this app called kfortouchpro:
http://www.megaupload.com/?d=IUL92CPS
or if you want to just use the hardware keyboard for everything:
Registry edit:
[HKLM\System\CurrentControlSet\Control\Layouts\e001 0409]
(MS IME mode)
Ime File = \windows\compime.dll
Layout Text = COMP IME
-or-
(HTC T9 mode)
Ime File = \windows\eT9ime.dll
Layout Text = eT9 IME
hello
I also have problems with my pro2 and logmein....
the ie toggle 1.1 does not work, i can install the app but i can´t find it to start??! program folder?
Logmein runs with ie6 and pro2, but it´s not so comfortable as using with pie.
(logmein with ie6: goto settings in ie6 and set the view to desktop, goto settings in logmein and change activex into java).
My old XDA using pie and logmein was perfect to control.(logmein for pda and using activex).
I wrote this application to add rotation support for any application you like using HTC GSensor.
It works with my HD and tested on HD2, any suggestions or bugs are welcome,
Special thanks for Obelix_A (Free SliderList control)
change log
ver. 1.1:
- Configurable registry key (you can change it in Config.txt file)
* Please uninstall last version before install new one.
Special Thanks for all dear people on xda for great support
Task to do:
Fix for some application like Excel.
Great app, thanks
when i install it apears a message= registry key not valid
what should i do?
ippokratis said:
when i install it apears a message= registry key not valid
what should i do?
Click to expand...
Click to collapse
What is your device name? and does it support GSensor?
i have same ,
'There is no valid registry key in your device'
phone : touch hd
WM 6.1
g sensor OK
ROM: 1.56.406.1(43972)fre
RADIO:1.13.25.24
PROTO:52.62.25.34U
TY m8
nans69 said:
i have same ,
'There is no valid registry key in your device'
phone : touch hd
WM 6.1
g sensor OK
ROM: 1.56.406.1(43972)fre
RADIO:1.13.25.24
PROTO:52.62.25.34U
TY m8
Click to expand...
Click to collapse
Please check your device registry for this key "[HKEY_CURRENT_USER\Software\HTC\HTCSENSOR\GSensor\WhiteList]"
Application modify this key for auto rotate
don't work on my touch pro :S
works fine with HTC HD2 thanks
Works on the Imagio as well. Thanks
doesnt work on my HD2
Cannot start the app, I get following message from
Chainfire's HD2 3D Driver Patch
"Anti-Stutter mode enabled (slow) - takes 10 seconds to go into effect!"
is there an incompatibility??
Thanks, Glix
HD2
2.05.51_2
2.5.19211619
1.48.407.1
not working
i have installed it properly on my HTC HD2 but its not working, not rotating any of the applications,
This program shows strange behavior on my HD2.
1. I'm adding an application from running programs list
2. It appears on the whitelist
3. I press Apply. Program suggest soft-rest. Ok.
4. After booting whitelist does not contain newly added applications, thus they does not rotate.
What i'm doing worng?
Install on HD2 but what does it do?
I installed this on the HTC HD2 but I guess I'm missing where I can test it and see how it works. Any word getting rotation on HTC Peep (twitter app)?
Anyone know if this will rotate the Sense itself such as the home tab of the HD2? Is it compatible with CHT 1.7?
example of it working?
Can someone give me an example on the HD2 of this working. It's confusing that Twitter is so popular & theirs no landscape mode for HTC Peep.
works on US Tmo HD2 stock rom
Works on my US HD2 stock rom with none of the reported problems mentioned above. Great app, easy to use. In addition to the ones already set up I added Opera mini 5 beta and Smart RSS Touch GR. Added both while running, restarted, and both rotated just fine.
Regis
Thanks For your app good job
Check This out
http://pocketnow.com/software-1/how-to-easily-configure-autorotation-on-htc-devices
Works on Rhodium.
Nice job dude
Not working on Diamond
Got the 'There is no valid registry key in your device' message.
I had loved it works on my Diamond
But anyway thumb up for using the HTC look and feel instead of that -too over exagerated- iLook & feel (If I want iPhone L & F, I had bought an iPone)
Seems to work, have to apply and save and reboot. BUT can't get MS EXCEL/WORD to work at all. The file selection screen works but EXCEL spreadsheet work go landscape. Any ideas? Thanks.