Anyone here use Logmein.com for remote desktop? I can't seem to get it to work.
if it's like on my hermes, logmein only works with PIE...Pocket Internet Explorer
No way to make it work with opera browser
The first time you log in with PIE it will suggest to install a .cab and next time you will log in you will be able to see your PC desktop...
hope this helps
Yeah, I installed the CAB but from PIE it refuses to launch the app when I log into the computer. Anyone else have this issue? I'm guessing it may require a patch or something.
whtrbt7 said:
Yeah, I installed the CAB but from PIE it refuses to launch the app when I log into the computer. Anyone else have this issue? I'm guessing it may require a patch or something.
Click to expand...
Click to collapse
did you perform a soft reset after cab install?
did you check your logmein psw?
sorry, no other ideas...
I'm also looking for a solution. I think something changed in Internet Explorer and doesn't load Logmein plugin.
try another free vnp solution...like net.viewer or REALVNC FREE
I have also problems with LMI
I am a long term LogMeIn user and I have also problems with my TP2. I can get to the point where I can choose Remote Control from the list but after that nothing happens. I have tried everything with cab installation - for nohing.
I had HTC Touch Pro earlier and it had some issues, too. I could establish a connection to remote desktop but I could not authenticate.
Before TP I had TyTN II and it worked fine. I have also have Qtek 2020, Qtek 9090, Qtek 9000 and HTC Advantage x7500 and they have also worked OK.
If someone can help us with this, it would be the greatest!!!
I'm bumping this up again to see if anyone has issues with Logmein.com . So far there is no fix. I think PIE isn't referencing the remote app so you can't even authenticate. Anyone have any ideas?
I had the same issue - and I was assuming it was because of the new IE - Logmein needs to fix its viewer to work with new IE
CHfish
OK, I found a fix. We need to download IE Toggle 1.1 and then set up IE to run as PIE. This will downgrade the browser and it will allow Logmein to work. Unfortunately I lost the link to the file so please google it.
OK, here's the fix link. Apparently people that had IE issues had the same problem.
http://discussion.treocentral.com/treo-pro/177752-toggle-between-pie-ie6-free-app-cab-file.html
whtrbt7 said:
OK, here's the fix link. Apparently people that had IE issues had the same problem.
http://discussion.treocentral.com/treo-pro/177752-toggle-between-pie-ie6-free-app-cab-file.html
Click to expand...
Click to collapse
Can you upload elsewhere please mate, would save everyone having to register with treocentral.
thanks,
Beasty
NP,
Here's the file everyone ^_^
http://www.megaupload.com/?d=W8D60G9N
Thanks, downloaded and uploaded to the tweaks thread.
Cheers,
Beasty
Have you got LMI working now on the TP2? I am particularly interested in remote desktopping for support reasons.
If so... How effective is it?
I also have an enquiry open with LMI.
Thanks,
Sam
SamJolly said:
Have you got LMI working now on the TP2? I am particularly interested in remote desktopping for support reasons.
If so... How effective is it?
I also have an enquiry open with LMI.
Thanks,
Sam
Click to expand...
Click to collapse
Urm, yeah - as above, credit to whtrbt7for providing solution. LMI on WM is free, so try it for yourself!
Credit should go to Codyppc on treocentral forums since he developed the IE Toggle app. It fully works after you've followed my directions.
I have a wierd problem with logme in. I installed IE Toggle and was running IE under PIE mode. Log Me in loaded fine and it even came with username/password screen on Win Server 2003 R2. When I try to enter my password through the QWERTY keyboard, nothing types in the password screen. Backspace works but it will not let me type anything in the password screen.
You seem to be having the keyboard issue that some users have. Here's the fix:
use this app called kfortouchpro:
http://www.megaupload.com/?d=IUL92CPS
or if you want to just use the hardware keyboard for everything:
Registry edit:
[HKLM\System\CurrentControlSet\Control\Layouts\e001 0409]
(MS IME mode)
Ime File = \windows\compime.dll
Layout Text = COMP IME
-or-
(HTC T9 mode)
Ime File = \windows\eT9ime.dll
Layout Text = eT9 IME
hello
I also have problems with my pro2 and logmein....
the ie toggle 1.1 does not work, i can install the app but i can´t find it to start??! program folder?
Logmein runs with ie6 and pro2, but it´s not so comfortable as using with pie.
(logmein with ie6: goto settings in ie6 and set the view to desktop, goto settings in logmein and change activex into java).
My old XDA using pie and logmein was perfect to control.(logmein for pda and using activex).
Related
hi to everyone,
thanks to this forum i started to use opera 8.5 on my qtek 9000 but infortunately every time i receive an email with a link it launches ( as i click on the link) PIE. is there a registry hack to modify the default inetrnet browser or am i condamned to copy the link and paste it on opera tu use it?
thanks for your help.
I know this answer is not up to the level of this forum...but maybe it is better than no answer:
I have installed Netfront 3.3 ( i definitely believe it is superior to Opera) and it allows to select NF as the default browser.
I had installed Opera and deinstalled it later, so I cannot check if it offers such an option to select it as default.
Andy.
Answer
To set any browser as the default one
open a registry editor
point to HKCR
and the extensions that you want the new browser to open:
htmlfile
http
https
ftp
url
xml
go to shell\open\command\default
For opera9 modify into:
"OperaL.exe" %1
it should be the same for other browsers
What the f**k!!
This is a 2 years old thread!!
GOAES said:
hi to everyone,
thanks to this forum i started to use opera 8.5 on my qtek 9000 but infortunately every time i receive an email with a link it launches ( as i click on the link) PIE. is there a registry hack to modify the default inetrnet browser or am i condamned to copy the link and paste it on opera tu use it?
thanks for your help.
Click to expand...
Click to collapse
Opera 9.5 gives you the chance to set as the default borwser and works like a charm! I have not tested Netfront.
Cheers
Thread may be 2 years old, but it's useful to me. I am trying to kludge together a way to have Opera open up when I click on a shortcut in the Favorites folder, which I have attached to the start menu. This will allow me to store/sync my favorites through my work desktop IE, since I'm not permitted to install Opera on it. (BTW I'm actually using a Titan, but I figure the reg hack should be the same. And I have a used Uni in the mail, so I sort of belong here!)
Under HKCR->urlfile->shell->open->command, I have this not including the quotes: "operaL.exe %1"
This triggers Opera when I click on sopmething in my Favs folder, but it fails saying that the local file is not available. Am I missing something, or is this not possible? I somehow have Opera set to open when I click a link in an email, so I should be able to copy the syntax of that reg entry, but not sure where to look for it.
TIA
What do I change it to if I want it to Pocket IE? When I open the "Video Sites" for Flash Video Bundle, I get Opera Mobile 9.5... I can't access the videos straight from there. Can someone help me out?
orb3000 said:
Opera 9.5 gives you the chance to set as the default borwser and works like a charm! I have not tested Netfront.
Cheers[/QUOTE
Would you mind telling us how to set Opera 9.5 as a default browser, I don't see the option in my settings? Thank You.
Click to expand...
Click to collapse
enigma1nz said:
orb3000 said:
Opera 9.5 gives you the chance to set as the default borwser and works like a charm! I have not tested Netfront.
Cheers[/QUOTE
Would you mind telling us how to set Opera 9.5 as a default browser, I don't see the option in my settings? Thank You.
Click to expand...
Click to collapse
ditto, I am unable to find that setting.
Click to expand...
Click to collapse
I have installed the IrisBrowser on the storage card, do I have to do anything different as just changing the registry does not seem to work ...
Hi guys,
I just update my qtek9000 with JASJAR_WWE_13076_164_10900_wwe_ship. It works fine so far except one thing. Has anyone tried Logmein with this new rom? It just does not go ahead even after I install the client program. I guess there's something wrong with the client or with the new PIE.
BTW, I have modifed the rom so that I can read and write Japanese. So, technically, the rom is not original. I did not install anything from the extended rom... should I install something out of it??
qt
Hi,
This is known problem with logmein. The client program doesnt work with wm5 aku2. Logmein support tells they will fix it.....(dont tell when)
thanks for the info, dherrero
logmein ran with the rom Xda_Exec_Upgrade_v113188... i have to find an alternative solution until logmein fixes the client, then.
qt
Logmein
Hi,
i have the same problem.Very annoying.Would you be so kind, and let me know if you find any alternative solution? And please if anybody realizes that they have fixed the problem, please send a message here.
THX
if you have a global ip address assigned to your pc, i suppose you could use vnc.
in my case, i share an optical connection with other people in my apartment building, and do not have a global ip... so i do not think i can use vnc from outside.
well, it looks like i have to wait for logmein people to fix the client issue whatever it is...
cheers,
qt
try z2r2pc. It uses a callback system to comunicate the systems. Very fast, a little more dificult to setup, ftp included....And you only need one license to access 1 or more pc.....
loginme works now!
i tried logmein for the first time after i upgraded my universal with the new qtek rom, and it works now! great!!
qt
I'm using the NRG Rose ROM 1.6. Instead of using the option to install Opera via the option under My Tools\Extras I downloaded the 4.2 multisigned version from Opera's website. This permitted me the option to not have all the security warning show each time.
Now I'm wondering how I can make it the default browser? I tried using a cab file called "WM6 SD OperaDefault.cab" and "WM6 OeraMiniAsDefaultBrowser - WithoutSelectionDialog.cab", but they didn't seem to work, perhaps because they were designed to work with an earlier version of Opera.
Are there any other solutions? Perhaps a registry tweak that I could do manually or something like that?
Thank you,
Tim
tmcdoniel said:
I'm using the NRG Rose ROM 1.6. Instead of using the option to install Opera via the option under My Tools\Extras I downloaded the 4.2 multisigned version from Opera's website. This permitted me the option to not have all the security warning show each time.
Now I'm wondering how I can make it the default browser? I tried using a cab file called "WM6 SD OperaDefault.cab" and "WM6 OeraMiniAsDefaultBrowser - WithoutSelectionDialog.cab", but they didn't seem to work, perhaps because they were designed to work with an earlier version of Opera.
Are there any other solutions? Perhaps a registry tweak that I could do manually or something like that?
Thank you,
Tim
Click to expand...
Click to collapse
Opera mini 4.2 default browser also in Extras you can set up for the internet key to open up Opera Mini.
Hope this helps.
Search Here
tmcdoniel said:
I'm using the NRG Rose ROM 1.6. Instead of using the option to install Opera via the option under My Tools\Extras I downloaded the 4.2 multisigned version from Opera's website. This permitted me the option to not have all the security warning show each time.
Now I'm wondering how I can make it the default browser? I tried using a cab file called "WM6 SD OperaDefault.cab" and "WM6 OeraMiniAsDefaultBrowser - WithoutSelectionDialog.cab", but they didn't seem to work, perhaps because they were designed to work with an earlier version of Opera.
Are there any other solutions? Perhaps a registry tweak that I could do manually or something like that?
Thank you,
Tim
Click to expand...
Click to collapse
SEARCH HERE IS THE OPERA MINI 4.2 AND WORKS IN EXCALIBUR
Opera Mini 4.2 CAB + OEM for Windows mobile
IF YOU WANT TO USE AS DEFAULT BROWSER USE THIS
JZ SmartMort -Copy/Paste- Opera (Mini & Mobile), NetFront, Skyfire, Iris & LOTS MORE
opera mini
tmcdoniel said:
I'm using the NRG Rose ROM 1.6. Instead of using the option to install Opera via the option under My Tools\Extras I downloaded the 4.2 multisigned version from Opera's website. This permitted me the option to not have all the security warning show each time.
Now I'm wondering how I can make it the default browser? I tried using a cab file called "WM6 SD OperaDefault.cab" and "WM6 OeraMiniAsDefaultBrowser - WithoutSelectionDialog.cab", but they didn't seem to work, perhaps because they were designed to work with an earlier version of Opera.
Are there any other solutions? Perhaps a registry tweak that I could do manually or something like that?
Thank you,
Tim
Click to expand...
Click to collapse
how did you get the signed version , cause I've tried multiple times, 4.1 and 4.2 , from my desktop to my phone , and straight into my phone from their site. I keep getting an unsigned version.
roloracer said:
how did you get the signed version , cause I've tried multiple times, 4.1 and 4.2 , from my desktop to my phone , and straight into my phone from their site. I keep getting an unsigned version.
Click to expand...
Click to collapse
Take a look @ this http://forum.xda-developers.com/showpost.php?p=2976541&postcount=6
opera
stylez said:
Take a look @ this http://forum.xda-developers.com/showpost.php?p=2976541&postcount=6
Click to expand...
Click to collapse
I bow down once again for the mighty STYLEZ making it happen for me, like always, every time I need your help you're there, I really apreciate it.
n0d said:
SEARCH HERE IS THE OPERA MINI 4.2 AND WORKS IN EXCALIBUR
Opera Mini 4.2 CAB + OEM for Windows mobile
IF YOU WANT TO USE AS DEFAULT BROWSER USE THIS
JZ SmartMort -Copy/Paste- Opera (Mini & Mobile), NetFront, Skyfire, Iris & LOTS MORE
Click to expand...
Click to collapse
I installed the JZSmartmort file and it successfully set Opera mini as the default when I click on links in my email, but.... it doesn't seem to be able to successfully put in the URL once it launches opera mini.
It launches opera mini, then it goes into where it should put the URL in, backspaces out the default www. that opera puts in. Then it fails to paste in the URL that I clicked on. It then returns to the Opera Mini screen and ends after clicking on the opera menu button. Any ideas?
Thank you,
Tim
tmcdoniel said:
I installed the JZSmartmort file and it successfully set Opera mini as the default when I click on links in my email, but.... it doesn't seem to be able to successfully put in the URL once it launches opera mini.
It launches opera mini, then it goes into where it should put the URL in, backspaces out the default www. that opera puts in. Then it fails to paste in the URL that I clicked on. It then returns to the Opera Mini screen and ends after clicking on the opera menu button. Any ideas?
Thank you,
Tim
Click to expand...
Click to collapse
Did you try the link i placed as it should work you will have to ammened the .mscr's as mentioned later on in the thread, i haven't tryed it but know others have
roloracer:
Always happy to help
Hi,
I tried the JZSmartmort opera launcher and the StartOperaMini: Mortscript by Badbob001. I haven't successfully gotten it to launch links from email or internet shortcuts into Opera Mini 4.2.
In one discussion point, sagementor states:
Originally Posted by sagementor View Post
The MortScript 1.43 does not come with script for opera mini 4.2. You have to edit the "JZDetectBrowsers.mscr" and "OperaMiniLink.mscr" to change "opera mini 4.1" to "opera mini 4.2".
But I haven't seen any sort of file that references those names. And in the startoperamini.mscr there is no reference to a version, just 4.x .
So at the moment, if I want to launch a link in a received email or associate a sliding panel shortcut with a URL, I have to use slow ol' PIE .
But on a different note, I love the Spb Backup software. I can now play around with this stuff and restore it to it's 'before' state if it really messes things up. I've already restored several times today.
Thank you,
Tim
stylez said:
Did you try the link i placed as it should work you will have to ammened the .mscr's as mentioned later on in the thread, i haven't tryed it but know others have
roloracer:
Always happy to help
Click to expand...
Click to collapse
Click on the computer you want to access and the URL https://secure.logmein.com/connect_axtest.asp comes up, logme in will hang displaying a white screen instead of asking for the user name and password, click on the address and replace axtest for mozilla so the address will be https://secure.logmein.com/connect_mozilla.asp and hit enter, in the next screen LogmeIn may ask if you want to install the plugin, just click Skip, and you are done.
Logmein uses the mozilla Java not ActiveX.
This means you can use the slider to zoom in and get a better resolved image to read those hard to see small fonts. If you play around with the LogMeIn zoom and the slider bar together you should be able to get the resolution you want
but the TP2 comes with a fully featured version of remote desktop?
I've used both and RD is definately the better performance wise, just wondering why you'd choose logmein over it?
dazkeirle said:
but the TP2 comes with a fully featured version of remote desktop?
I've used both and RD is definately the better performance wise, just wondering why you'd choose logmein over it?
Click to expand...
Click to collapse
Maybe it's my age, but one of the PCs I want to control has a 1920 x 1200 display and the text is really. really, small and difficult to read on the TP2. This option lets you zoom in. Also the font on RDP gets a bit screwed up betimes.
My version of the TP2 didn't have RDP, I got a CAB from this great forum to remedy that.
I agree with Tomo. RDP isn't always the best solution especially going cross-platform. I access several OSX, Ubuntu, and Windows interfaces using Logmein which also helps to solve the dynamic IP issues on some systems. While RDP is faster, it also leaves out a lot of control. The Opera browser workaround is ok but I still use the WM client since I get a better refresh and I can also adjust zoom properly with the WM Client.
whtrbt7 said:
I agree with Tomo. RDP isn't always the best solution especially going cross-platform. I access several OSX, Ubuntu, and Windows interfaces using Logmein which also helps to solve the dynamic IP issues on some systems. While RDP is faster, it also leaves out a lot of control. The Opera browser workaround is ok but I still use the WM client since I get a better refresh and I can also adjust zoom properly with the WM Client.
Click to expand...
Click to collapse
How do you manage the zoom?
fair enough. I actually also use logmein so am not an rdp fanboy.
I actually like the way LMI handles multiple monitors etc.
Thanks!
Hey Tomo,
thanks, it works pretty fine. I searched all day long for a solution like this.
bye
Hey,
Nicely played Sir.
It seems to work well with Opera 9.7, if it's only Java maybe we can get it working on other devices as well, Symbian? or Opera mini or skyfire? hmh...
Thanks!
Tomo said:
Click on the computer you want to access and the URL https://secure.logmein.com/connect_axtest.asp comes up, logme in will hang displaying a white screen instead of asking for the user name and password, click on the address and replace axtest for mozilla so the address will be https://secure.logmein.com/connect_mozilla.asp and hit enter, in the next screen LogmeIn may ask if you want to install the plugin, just click Skip, and you are done.
Click to expand...
Click to collapse
I did as you say above and get to the point where I enter my login info, but then it bounces me back to the blah, blah, blah message about "...A Windows Pocket PC 2003 or newer device...." and wants me to download the CAB file again.
I never see the "connect_axtest.asp". The URL I'm seeing / overwritting is https://secure.logmein.com/connect_ce_check.asp could that be my issue?
Please advise...
F
I can't get it to work either. I get the same https://secure.logmein.com/connect_ce_check.asp page rather than the page referenced above. I changed the link above to /connect_mozilla.asp and I got further than before. I got to the password login for the computer and I was able to select remote control. But when I selected remote control, I was taken to the same page telling me to download the CAB file.
dazkeirle said:
but the TP2 comes with a fully featured version of remote desktop?
Click to expand...
Click to collapse
Where is this? Mine does not have it
TP2 - Remote Desktop
PaulusUK said:
Where is this? Mine does not have it
Click to expand...
Click to collapse
My Sprint TP2 has it at "Start -> All Programs -> Remote Desktop Mobile". Scroll down to the "R"s and you should see it.
F
Do I have to use 9.7 or will 9.5 work. With 9.5 i've gotten all the way to the PC login but then I only get a white screen that says simply "ip mismatch". On the PC it shows that a connection has been made though.
jalanjkcarp said:
I can't get it to work either. I get the same https://secure.logmein.com/connect_ce_check.asp page rather than the page referenced above. I changed the link above to /connect_mozilla.asp and I got further than before. I got to the password login for the computer and I was able to select remote control. But when I selected remote control, I was taken to the same page telling me to download the CAB file.
Click to expand...
Click to collapse
If I remember correctly, I used IE first (full IE not pocket) using this: http://forum.xda-developers.com/attachment.php?attachmentid=198923&stc=1&d=1245870498 to switch, it allows you to toggle between IE and PIE. Then downloaded the LogMeIn CAB. This is a one time only operation. Do this and then try the Opera fix. If this solves the problem I will amend the post to include it.
I am runing WM 6.5 with Opera 9.7.
No problem loging in with Java, it is a bit slower then ActiveX on IE.
I dont have 9.5 to try as it dose not have my local Lang support.
vHatch said:
Do I have to use 9.7 or will 9.5 work. With 9.5 i've gotten all the way to the PC login but then I only get a white screen that says simply "ip mismatch". On the PC it shows that a connection has been made though.
Click to expand...
Click to collapse
I'm pretty much in the same situation. I'm running Opera 9.5 and I really don't want to install the 9.7 Beta.
Speaking of the Opera 9.7 Beta, how stable is it? The last update was over a month ago. Are they're any release date rumors??
Bump it up.
I think that is a problem with the PC, try connecting on a normal PC to LOGMEIN..
Anywho I am using this method for some 2-3 weeks now and it works 100% on a daily basis..
thx alot guyz!
garberfc said:
I'm pretty much in the same situation. I'm running Opera 9.5 and I really don't want to install the 9.7 Beta.
Speaking of the Opera 9.7 Beta, how stable is it? The last update was over a month ago. Are they're any release date rumors??
Click to expand...
Click to collapse
I'm using the out of the box ROM/Opera that came with a HTC flavour TP2 (early issue) and it works for me
*cough* *cough*
So this is for us Tmobile TP2 users who have PIE as the default browser.
I've had a few people test this & it has worked for most. I've also tested the updated cab from a fresh hard reset & it works for everything.
Things it does:
Sets OM as Default Browser
Makes OM the default for the Internet tab on TF3D
Changes the startup page on the Internet tab to Google
Sets search function on Internet tab to go through Google
Opens bookmarks on Internet tab in OM
Opens all links in any app with OM
Increases max tab allowed in OM to 5
Changes "Minimum overview Zoom" in OM to 90
Difference between OD & ODBookmarks
The ODBookmarks cab is the same except it takes away the globe & 4 default bookmarks on the Internet tab & just has your OM bookmarks listed.
(See screenshot)
Uninstalling
If you don't like this, just unistall like any other program. Also, to change the Internet tab back to Tmobiles default, install the TmoDefault cab. You have to do this because if you unistall the first cab it'll delete the settings for the Internet tab. Also, for some reason, no matter what, after you set OM to default, if you revert back to default settings, OM will still open all links in other appls. Don't know why, but it will not revert back to IE. Sorry.
Warning
If you've changed any settings in the OM ini, this will overwrite those settings so you'll need to redo them.
***Not for us with WM6.5 &/or Manila 2.5+ since i dont run a newer rom & i've never messed with it.***
Thanks for any help. Please leave feedback.
If you tried the original version & your links don't open in Opera, install the new one & everything should work. Thanks for helping test the original.
i installed the 1st cab and it works...launches opera by default from the net tab
It fixed the internet tab for me but links in mail still opened in IE.
vHatch said:
It fixed the internet tab for me but links in mail still opened in IE.
Click to expand...
Click to collapse
hmm, it should have done everything. i wonder what went wrong? Did you soft reset the device & then try?
@fabolous04 do links in emails & everything open up in Opera Mobile as well?
Works great. however i wondering how to change the internet shortcut key to opera. cos it defaults to PIE. thx
tipduncan said:
Works great. however i wondering how to change the internet shortcut key to opera. cos it defaults to PIE. thx
Click to expand...
Click to collapse
Are you talking about the key on the keyboard? I don't know how to fix that. I was just thinking about that a few minutes ago.
Also, do links in emails & everything open up in Opera Mobile as well?
xnifex said:
Are you talking about the key on the keyboard? I don't know how to fix that. I was just thinking about that a few minutes ago.
Also, do links in emails & everything open up in Opera Mobile as well?
Click to expand...
Click to collapse
It still opens links in internet explorer, as far as I can tell. It did change the tab in tf3d.
mac404 said:
It still opens links in internet explorer, as far as I can tell. It did change the tab in tf3d.
Click to expand...
Click to collapse
Ok, i have to figure out what else i changed on my phone but didn't put in the CAB that's makes the links work on mine.
Works for me; plus my email links still open in opera mobile
Cool. Glad to hear it's working.
@jim_0068 I'm thinking you're right (on tmonews) that the preference setting inside OM is needed as well, so I may include a modded ini file for that in the CAB. Its weird though because my ini file shows that particular setting as not being changed yet it all still works for me.
I just wish I could compare my registry to someone who hasn't tried this or anything else on it, just to double check all the registry settings i changed.
Anyway to get this going for the WM 6.5 Windows Default home screen? On the bottom it says favorites, but IE is showing and you could add favorites for IE. I wonder if this could be Opera and add bookmarks for Opera.
Works Great
Thanks for the cab
HeavyComponent said:
Anyway to get this going for the WM 6.5 Windows Default home screen? On the bottom it says favorites, but IE is showing and you could add favorites for IE. I wonder if this could be Opera and add bookmarks for Opera.
Click to expand...
Click to collapse
I don't know if it will work for 6.5 or not. If you try it, don't hold me liable if it messes anything up. If it does work though, let us know.
Also, glad to see it works. I guess now i'll edit the original post to show what all registry edits & what-not that it changes.
to the original poster: I just noticed that while this works perfectly it doesn't scale properly when you are using touchflo 3d in landscape. was curious if you could look into that? thanks for the wonderful cab though.
Thanks for the cab., it worked perfectly for me. One very minor issue however. I have both the stock version of Opera Mobile and Opera Mobile 9.7 (I believe) beta downloaded from OM's website. When launching the default browser, it open with the stock OM, but with links to emails, the beta version opens up. this isn't a problem for me honestly, I even actually prefer it since the beta version actually scales the page better, but I just thought you'd wanna note that. Awesome work on the cab. and thanks again.
Oh yeah, how do I use the favorites cab.? Is that what I use to change the favorites on the internet slide of the tflo3D?
Worked great
No problems. I still had to do the configuration in opera:config to set it as default so it would be used from email links. Other than that, it worked perfectly. Thank you for the easy tweak. Those of us who dont know what we are really doing in the registry appreciate it when someone takes a tweak like this and wraps it up for us with a nice ribbon.
jim_0068 said:
to the original poster: I just noticed that while this works perfectly it doesn't scale properly when you are using touchflo 3d in landscape. was curious if you could look into that? thanks for the wonderful cab though.
Click to expand...
Click to collapse
do you mean when you're on the Internet tab & go to landscape mode? I just did that on mine (i have it where the globe is gone) & it just moves all my bookmarks to the right. It seems that TF3D has it so that The globe will always default to the left part of the screen in landscape. I don't know how to fix that
ryushe said:
Thanks for the cab., it worked perfectly for me. One very minor issue however. I have both the stock version of Opera Mobile and Opera Mobile 9.7 (I believe) beta downloaded from OM's website. When launching the default browser, it open with the stock OM, but with links to emails, the beta version opens up. this isn't a problem for me honestly, I even actually prefer it since the beta version actually scales the page better, but I just thought you'd wanna note that. Awesome work on the cab. and thanks again.
Oh yeah, how do I use the favorites cab.? Is that what I use to change the favorites on the internet slide of the tflo3D?
Click to expand...
Click to collapse
As for the 9.5 vs 9.7 issue, i think that has to do with if you set 9.7 as default in the settings (i think that's an option)
The favorites cab is the same as the first except for it takes out the globe & the 4 default bookmarks on the Internet tab & just lists all the Bookmarks you have set in OM
cirrob said:
No problems. I still had to do the configuration in opera:config to set it as default so it would be used from email links. Other than that, it worked perfectly. Thank you for the easy tweak. Those of us who dont know what we are really doing in the registry appreciate it when someone takes a tweak like this and wraps it up for us with a nice ribbon.
Click to expand...
Click to collapse
Yeah I'm going to edit the cab to include the ini for OM with the "Browser First Time Launch" set to 1
Yeah the main reason I made this is so that I don't have to redo the registry edits manually next time i hard reset. Glad i could help out others
updated OP to fix changes in cab file. Everything should work.
xnifex said:
I don't know if it will work for 6.5 or not. If you try it, don't hold me liable if it messes anything up. If it does work though, let us know.
Also, glad to see it works. I guess now i'll edit the original post to show what all registry edits & what-not that it changes.
Click to expand...
Click to collapse
What I meant was to make a new .cab for the WM 6.5 non Manila OS to have Opera the default. You know how it says favorites on the last slide and it's for IE? I want it for Opera instead. You know what I'm talking about right?
HeavyComponent said:
What I meant was to make a new .cab for the WM 6.5 non Manila OS to have Opera the default. You know how it says favorites on the last slide and it's for IE? I want it for Opera instead. You know what I'm talking about right?
Click to expand...
Click to collapse
I haven't messed with 6.5 at all so i don't know what slide you're talking about or anything. Do you have a screen shot?
As for setting Opera as the defaultl (w/o TF3D), if someone could provide the registry tweaks (which probably are the same) for 6.5, I can compile them all in to a cab for you.