how do u hard reset WM 2005 on xda II?? i tried search...cudnt find nething
hard reset WM2005
you have to make sure to follow the sequence correctly and keep all of them pressed fo 5-10 secs
Believe me this works!!
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
After this you will see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No --------------- should remain NO
3 Storage = No --------------------- change this to YES
after this press the big round button b/w the call and call end buttons
the device reboots.
*this is taken from another post somewhere
My Qtek 2020 only hard reset if I press Power/ Recorder/ Notes/ Reset Button IN THE SAME TIME for only 1 sec.
I have IDD call to press "+" in prefix, but the FN key is not work in calling mode, it will show up T only. Please advise how to fix.
thx
Press and hold the 0 (zero) key for more than a half second!
Hope it helps!
Just press and hold the "0" key for 2 sec.
thanks all!
there is a new version of AE Button! The Button map application! Any experiences? Is there an improvement for the HD? Let´s test
Anyone tried?
I wish to know too =)
Is it free?
I have this registered.
The unregistered version is actually almost fully functioning and well worth trying.
I choose to register since I found the application useful and it seemed fair to pay the developer.
THANKS, for the new version alert. But, I suspect there is little new as the history details for this version are:
02.02.2009(v2.6.6):
Fixes:
Backlight works on HP 612c now
Languages:
Updated Traditional Chinese resources (thanks to Chow Yuh)
AE Button
I find this software very useful. It completely eliminates the need of locking/unlocking software for me.
I just set double or triple tap to answer and hang up keys. This will prevent accidental key press when taking HD out of pocket. To answer call, simple double/triple tap on answer key or simply slide on screen to answer (built-in screen lock will be unlocked during incoming call).
Set press and hold volume up to toggle wireless and down to toggle bluetooth.
This one single software solved all my screen locking + lack of buttons issues!! Believe me i tried touch lock pro, sensor lock, slide to unlock and what ever you can think of (I didnt like because I think its not really practical for me to be rolling phone 180 degrees or shaking back n fourth in meetings to answer a call.)...I know you guys may argue it has light sensors to unlock, but I'll be in meetings and presentations which might be low light conditions. I do not want to set very small for polling interval either. If you have tried all else, no harm in trying this.
if you guys face the same problem like me, this tiny software might be the right solution for you.
The best combination for me:
Gyrator2 (fine tuned based on my apps) + Lumos + AE Button Plus + Touch Response (for onscreen keypress only).
The only flaw that i could find to complain is that they should really change the icon...it looks like bread/potato/or whatever...
Headset Buttons
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
noctifer said:
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
Click to expand...
Click to collapse
Hi, I believe not. I understand the press events from headsets and bluetooth AVRCP are actually trapped in the hardware by HTC and by-pass the operating system and are sent directly to TF3D music or WMP.
If you check on the AEB plus site: http://ae.inc.ru/ it says the app is not for specific applications.
(Also: the AEB+ icon does look like a loaf of bread !!)
Will it allow me to remap the Home button on the Touch HD?
CorruptedSanity said:
Will it allow me to remap the Home button on the Touch HD?
Click to expand...
Click to collapse
Nope. All the others but not the home button.
I have:
1. volume up. 1 press = arrow up, 2 press = volume up, long press = plamp (flash light)
2. volume down. 1 press = arrow down, 2 press = volume down, long press = resco notes recorder (auto)
3. OK / back. 2 press = rotate screen 90 deg
I keep the long press on phone end and long press on phone start handled by the system.
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
CorruptedSanity said:
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
Click to expand...
Click to collapse
Thanks, but I'm needing a suggestion for replacing the flash light. Never used this now "for real" so I shall find something else for the long volume up press ...
I have almost identical settings but use the long up as a bluetooth toggle. This is a fantastic program and really eliminates one of the few shortcomings of this phone.
Cheesy Dave said:
long press = plamp (flash light)
Click to expand...
Click to collapse
do you know where i can get this plamp please?
P Lamp v1.5 http://pda.jasnapaka.com/plamp/
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Sorry, I don't understand what you want. Is "call button" the "end call" or "start call" ?
Dave, call button is the left-most button that answers/makes a call. If it were colored, it would have been green.
I want to short press it to start menu (heres the tricky part, I have Quick Menu as my start menu).
Basically I miss the Start button from my TyTn II (Kaiser) and the scroll on the top. I have managed to set the volume buttons as scroll up/down and want the start call button to imitate the start menu button when I long press it. But I want to long press it for as little time as possible. So say 1 second as opposed to 3 seconds.
I see. So, two points:
1. Get quick menu
2. Use a "short" long press
I asked because the green/start left button is assignable in the standard settings - button to the <start menu> but I don't know how to do this to quick menu. I guess if you make a short cut to quick menu and drop this somewhere in the Programs folder in windows (or a sub-folder) then the standard settings - button should find it OK.
But, for option 2 I have no idea. Instead of the "short" long press how about using AEB+ with a double press ?
Dave, I see from the options that you can set the delay. I guess this from the "Key Press timeout" menu where you can select units of time starting with 200ms to 900ms. I am guessing that 200ms of time needed for a long press would be the shortest longpress possible.
Any how, how to assign the green button to start menu? It doesnt work for me. I have it as 2 presses or 3 presses or long press for start menu but nothing happens.
one problem it works to rotate(volume up which i assigned) but as soon as i make a call or recieve a call it no longer works untill i soft reset???? im i missing a setting or something? i have duttys rom, please help! : ) thanks!
Hi as title, is there a way to wakeup the device using any key instead of just the power key?
its a bit annoying have to press the top power key just to use the phone
izudeen said:
Hi as title, is there a way to wakeup the device using any key instead of just the power key?
its a bit annoying have to press the top power key just to use the phone
Click to expand...
Click to collapse
Yes I think so. At settings ==> system tab ==> keylock.
There you check the: do not lock buttons option.
HKLM\HARDWARE\OEM\KEYBD\KeyLock: value change from 1 to 0
quarintus said:
Yes I think so. At settings ==> system tab ==> keylock.
There you check the: do not lock buttons option.
Click to expand...
Click to collapse
I cannot find find the keylock option under systems tab.
Hmmm strange. Mine's comming in today. I just looked at my hermes. If I find out how (without editing the regitstry), I will let you know
hi i want to remove the camera button from the pro2 today screen and add the device lock button , over there, can any one help me
Thanks in Advance
kevin
on the Leftkey
HKLM\Software\HTC\Manila
HomeLSKText = Lock or what ever you want
HomeLSKPath = \windows\EndKey.exe
or on the Rightkey
HKLM\Software\HTC\Manila
HomeRKText = Lock or what ever you want
HomeRSKPath = \windows\EndKey.exe
kevin_bkk said:
hi i want to remove the camera button from the pro2 today screen and add the device lock button
Click to expand...
Click to collapse
You may be interested in the "other" way to do this. Simply hold down the end-call button for a sec or so. You can change it to disconnect the data connection instead or to give you a menu to choose.
fraser said:
You may be interested in the "other" way to do this. Simply hold down the end-call button for a sec or so. You can change it to disconnect the data connection instead or to give you a menu to choose.
Click to expand...
Click to collapse
Just done this, setting the button to lock, is it possible to change it back to the menu?
Yes. Go to Settings, All Settings, Personal (tab), Buttons, End Key (tab).
Thankyou Fraser.
how can i assign the lock button to be with the Back Button instead of end, so when i press and hold back it lock the device as well ofcourse as returning to home screen