:? Dear All
Hope this message reaches you'll in good health and best of spirits.
I am new to this forum, so please help me.
After upgrading to WM2005 and after installing Hima DOC Tools v1.0, My O2 Xda II has become slow and my Storage Memory has decreased from 32.00 MB to 7.40 MB. When I install any program and / or put any Data in the Main Memory in place of Storage Card (SD Card), it reduces the Storage Memory, I thought the Program Memory usually reduces instead of Storage Memory.
Please clarify my doubts and if there is any procedure to increase the Storage Memory to 32.00 MB or default of 64 MB, please explain how to do it in simple manner, since I am just an end user, will not understand technical language.
The details of my o2 Xda II after upgrading to WM 2005 is :
VERSION
-------
ROM Version: 1.60b.96WWE
ROM date: 04/22/05
Radio Version: 1.18.00
Protocol Version: 1337.38
HARDWARE
--------
CPU: Intel(R) PXA263
Speed: 400 MHz.
RAM Size: 128 MB
Flash Size: 32 MB
Flash Chip Type: 28F128K3
Data Bus: 32 Bits
Storage Size: 30.53 MB
LCD: 240 x 320 TFT
Colors: 65536
IDENTITY
--------
Model No. PH10B
Platform: Pocket PC
I once again request you to help me.
Best Wishes
Dineshchand Nahar
I upgraded my XDA Exec with the new ROM 1.30.162 WWE and Activesync 4.1 but each time I sync, I get a "bad_pool_header" error on a blue background which crashes my machine.
I installed Activesync 4.1 on another laptop to check if this problem was due to drivers etc on my main laptop, and discovered that the device syncs with no problems. There is, therefore, a conflict between the new Activesync 4.1 or the new ROM, and something on my main laptop.
Has anyone come across this problem?
Thanks
The problem is definitely on your PC. Reinstall motherboard drivers, reflash bios, remove antivirus, reinstall windows, etc.
Thanks - pretty drastic...!
Is there a short cut? ie reinstalling drivers one by one? If so, which are likely to be the main culprits? Motherboard? Broadband modem? etc
The error code after reboot of the laptop is:
BC code 19 BCP1:00000020 BCP2: 89A76000 BCP3: 89A766C0 BCP4: 0AD8000
OS Ver 5_1_2600 SP: 2_0 Product 256_1
\WER22c7.dir00\Mini052506-06.dmp
\WER22c7.dir00\sysdata.xml
Does this reveal anything that could explain which driver?
Thanks
10860 said:
Does this reveal anything that could explain which driver?
Click to expand...
Click to collapse
no.
You should create a complete crash dump, and use microsoft debugging tools to find faulting driver. Or better reinstall windows.
I looked at the minidump file and used MS debugger, the readout is below. I am not sure if I did the debugging ok, or how to interpret it. Anything useful in the readout?
Thanks
Loading Dump File [C:\Mini052406-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055a420
Debug session time: Wed May 24 20:25:34.038 2006 (GMT+1)
System Uptime: 0 days 0:52:32.633
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
.......................................................................................................................................................................................................
Loading User Symbols
Loading unloaded module list
.................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 19, {20, 88187000, 881876c0, ad80000}
Probably caused by : Unknown_Image ( nt!KeBugCheck2+4d4 )
Followup: MachineOwner
---------
kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 00000020, a pool block header size is corrupt.
Arg2: 88187000, The pool entry we were looking for within the page.
Arg3: 881876c0, The next pool entry.
Arg4: 0ad80000, (reserved)
Debugging Details:
------------------
BUGCHECK_STR: 0x19_20
POOL_ADDRESS: 88187000
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
LAST_CONTROL_TRANSFER: from 00000000 to 8053331e
STACK_TEXT:
f78cab74 00000000 00000000 00000000 00000000 nt!KeBugCheck2+0x4d4
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KeBugCheck2+4d4
8053331e ?? ???
FAULTING_SOURCE_CODE:
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: nt!KeBugCheck2+4d4
IMAGE_NAME: Unknown_Image
DEBUG_FLR_IMAGE_TIMESTAMP: 0
BUCKET_ID: ZEROED_STACK
MODULE_NAME: Unknown_Module
Followup: MachineOwner
---------
Nothing useful, minidump does not have enough information
It is very difficult to debug pool corruptions.
Hello, the forum! This is my first post, and I'm making it out of desperation. I have a time-sensitive problem, having just bought an O2 Xda IIs in Jakarta; if I need to complain to the shop that sold it to me, I'll have to do so very soon....
It's just that I'm confused over why the box and manual should read 96 MB ROM, when my "Device Information" screen tells me I've got a Flash Size of 32 MB. Please excuse my ignorance, but I'm completely new to this - it's my first ever PDA Phone.
I see that Blue Angel is also said to have 96 MB ROM here:
Code:
http://en.wikipedia.org/wiki/O2_xda
[edited for correction]
My specs are shown here. Please help me understand what the problem is. Thanks so much!
sub_rosa25
HardWare:
CPU : Intel(R) PXA263
Speed : 400 Mhz
RAM Size : 128 MB
Flash Size : 32 MB
Flash Chip : 28F128K3
Data Bus : 32 bits
Storage : 43.26 MB
LCD : 240X320 TFT
Colors : 65536
rom is 96 mb, you forget the extrom which is part of the rom and takes about 16 mb
simple math: extrom + flash + storage = rom
storage should be 48 mb but after installing the crap from extrom the rest is 43 in your case
Thank you for the quick and easy answer. It wasn't adding up for me because I didn't realize that extrom was included in the 96 MB ROM quoted. Cheers!
Hi,
I purchased one HTC Touch with german language and we need to change or upgrade to French or English language
Many Thanks:
------------------------------------
Touch version : Elfin
Device ID : ELF010050
CID : HTC__102
IPL : 2.20.0002
SPL : 2.20.0000
ROM Version : 2.20.407.1
ExtROM Version : 2.20.407.101
Operator Version: None
AKU Version : 0.4.2
Page Pool : 12 MB
RAM Size : 128 MB
ROM Size : 256 MB
Model No. : ELF0300
Part Number : 99HEH043-00
MCC+MNC : Not found
I'm kinda of a newbie to the whole flashing the HTC 8125...I've searched and searched and downloaded a couple of ROMS that I would find pretty cool on my phone but...whats next? I got a Cingular 8125 (G4)...I did the hardSPL..and heres what I got...
Wizard Service Tool v4.2.2
18/02/09 02:08:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: ----------
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ee9df2f2 - 5.00M (0x4fec00)
6ea9d13a - 48.23M (0x303c000)
0fb25f92 - 50.95M (0x32f4000)
0fb25f3e - 2.94M (0x2f0000)
2fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000306901051024050918060635
Key Index: 84
All Done.
I still got WB5 on my phone..and I tried TNT.1933 touchflo..by hooking up my phone with a usb and activesync..but when I ran the RUU it said file error..do I have to upgrade to WB 6.1 first and if so...where do I get it (ive searched wiki and everything I could search here) or am I missing a step? Any help would be great, thanks!