Develop Bugs

after used Vogue_unlocker_MFG_2.31,i can't open my phone

after used "Vogue_unlocker_MFG_2.31",i can't open my phone now
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF ,
but after several second ,my 6900 can't open and i also can't load bootlooder mode
\
who can help me ?

yyqk2007321 said:
after used "Vogue_unlocker_MFG_2.31",i can't open my phone now
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF ,
but after several second ,my 6900 can't open and i also can't load bootlooder mode
\
who can help me ?
Click to expand...
Click to collapse
i take it you followed this tutorial to the letter and posted at ppcgeeks for help?
http://forum.ppcgeeks.com/showthread.php?t=24979
and give us some details!

mines bricked too but i followed the instructions on this site now i'm bricked ,man i wish i would had that link earlier.

bigpearl said:
mines bricked too but i followed the instructions on this site now i'm bricked ,man i wish i would had that link earlier.
Click to expand...
Click to collapse
what exactly do you mean bricked? details
can you still enter the bootloader? and if so, what are the numbers shown there?

it wont even boot ,but when you plug in usb it has a red light where the speaker is

bigpearl said:
it wont even boot ,but when you plug in usb it has a red light where the speaker is
Click to expand...
Click to collapse
Check this post on the PPCGeeks Forum. You will need your original 512 SD card that came with the phone and a card reader for your computer. I bricked my phone trying to upgrade the 3.xxx ROMs and that post fixed everything.

my phone wont boot at all.

bigpearl said:
my phone wont boot at all.
Click to expand...
Click to collapse
So you ARE saying you can't even enter bootloader mode?
POWER+CAMERA+SOFT RESET

bigpearl said:
my phone wont boot at all.
Click to expand...
Click to collapse
ya like champ said, we really just need to know if you can enter the bootloader right now. if you dont understand what we mean, let us know. we need more details.

jim256 said:
ya like champ said, we really just need to know if you can enter the bootloader right now. if you dont understand what we mean, let us know. we need more details.
Click to expand...
Click to collapse
LOL! I guess we'll never know, he hasn't responded, already been two days! I can't go more than a few hours without my Touch fully up and running !

TheChampJT said:
LOL! I guess we'll never know, he hasn't responded, already been two days! I can't go more than a few hours without my Touch fully up and running !
Click to expand...
Click to collapse
lol ya, know where you're coming from there!

nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.

bigpearl said:
nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.
Click to expand...
Click to collapse
I bricked my phone when upgrading the to the new radio and I COULD NOT boot. The link I posted showed how to boot directly into the Bootloader with a SD card formatted to Fat32, so that I could then re-run the Coke's SPL.
Again I couldn't boot. I didn't get anything on the screen, only the LED stuck on RED.

Yeah, I had that too. Fortunately, I had a warranty and was able to get a free replacement, but it was very annoying

bigpearl said:
nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.
Click to expand...
Click to collapse
have you tried giving jack's tip a shot? i have heard of/seen that work for a lot of ppl. im not sure if it requires the original 512mb card, but i suppose it couldnt hurt. just ensure its formatted fat32!
let us know what happens.

im about to try it jack ,wish me luck

i tried it still cant get the phone to do anything,

bigpearl said:
i tried it still cant get the phone to do anything,
Click to expand...
Click to collapse
try asking imcokeman.
so when the phone is just sitting there, and you poke the reset hole, what happens?
also, what happens when you try the power camera reset? when you HOLD the power button, the camera button, then poke the reset hole and you dont let go till something comes up??

yyqk2007321 said:
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF
Click to expand...
Click to collapse
Uhhhh.....I just read over the first post to remember the situation, and found this bit in your orignal post, correct me if I'm wrong, I hope you know jim, but I don't think you were supposed to change the .nbh file at all.

this picture is how my phone looks ,this is all it that it does.

What did I do wrong here?

I have a HTC touch with Bell. I flashed NFSFAN's WM6.5 onto it. I didn't use a cab, mostly because I couldn't figure out which one or how to....
When I power on my phone I get to the today screen and I can't do a thing. It shows the correct time, and flashed the green light... I can see the options, and if I press on the screen the phone vibrates.
What did I miss? Oh ya, and how do I turn off the vibrate on screen press when I do get this working?
Thanks!!

On subsequent restarts I find that I am sometimes unable to even get to the today screen and connecting to the PC is impossible.
Hope that helps explain it.

The question is, what did you flash it WITH!?

NFSFAN's 6.5 21198 V3 GENERIC CARRIER ROM

x01001010x said:
NFSFAN's 6.5 21198 V3 GENERIC CARRIER ROM
Click to expand...
Click to collapse
did you update the radio first?
did you hard reset after you flashed?
did you flash this ROM via activesync or bootloader mode?
Detroit Doug

Yes I think I did update the Radio. I used the current bell version from HTC. (Radio Version 3.42.50)
Yes I have hard reset the phone. I noticed that it froze once after a hard reset and had replaced the start with customization. I left it for 10 minutes but nothing had changed so I reset it.
I entered bootloader on my phone, plugged in the usb cable then ran the loader on the pc and waited for that to complete.

x01001010x said:
Yes I think I did update the Radio. I used the current bell version from HTC. (Radio Version 3.42.50)
Yes I have hard reset the phone. I noticed that it froze once after a hard reset and had replaced the start with customization. I left it for 10 minutes but nothing had changed so I reset it.
I entered bootloader on my phone, plugged in the usb cable then ran the loader on the pc and waited for that to complete.
Click to expand...
Click to collapse
OK, there is an issue with the flash from what it sounds and bootloader is done from the SD card NOT from a USB cable, try this...
- Using the original SD Card that came with the phone (or any SD card under 2GB in size) Format your SD card making sure it FAT32
- Copy the RUU_signed.nbh file over to the that card and rename it VOGUIMG.nbh
- Then flash via bootloader power+camera+stylus, it will pull the image to flash from your SD card automatically
- wait and then hard reset (red+green+stylus) after customizations/autotun occurs
then try using the phone, hopefully that will take care of the issue
Detroit Doug

Detroit_Doug said:
OK, there is an issue with the flash from what it sounds and bootloader is done from the SD card NOT from a USB cable, try this...
- Using the original SD Card that came with the phone (or any SD card under 2GB in size) Format your SD card making sure it FAT32
- Copy the RUU_signed.nbh file over to the that card and rename it VOGUIMG.nbh
- Then flash via bootloader power+camera+stylus, it will pull the image to flash from your SD card automatically
- wait and then hard reset (red+green+stylus) after customizations/autotun occurs
then try using the phone, hopefully that will take care of the issue
Detroit Doug
Click to expand...
Click to collapse
Shouldn't be an issue flashing from bootloader mode via PC cable. Bootloader allows the computer to reckonize your phone as a usb device.
The 6.5. ROM is still a custom ROM, so the question is have you unlocked your phone?
If not unlock using imcokeman's 2.31 unlocker first, then follow dd's instructions.

jmitr said:
Shouldn't be an issue flashing from bootloader mode via PC cable. Bootloader allows the computer to reckonize your phone as a usb device.
The 6.5. ROM is still a custom ROM, so the question is have you unlocked your phone?
If not unlock using imcokeman's 2.31 unlocker first, then follow dd's instructions.
Click to expand...
Click to collapse
Yeah the "I think " part got to me as well until I remember responding to a different thread of his helping him along in getting started to flash and in that one he had unlocked as was on his 3rd ROM by the end of it LOL so I believe he has successfully unlocked his phone, just the issue may be corruption in the flash of the 6.5 WinMO ROM
Detroit Doug

Ok. I will have to find my smaller card. All I have here is a 4GB one.
Thanks jmitr and Detroit Doug! I will try moving the file to the card. It will take me a few days to get my smaller card as I left it at the office.

Any luck yet? let us know how it worked out for you...
Detroit Doug

I will. I turned my office upsidedown looking for that little card... and it was at home by my laptop the whole time.
I have it now, and actually just came online to get the file names I need. I will keep you updated.

Well... that was a little different. I didn't get the customization the first run after the flash. I did however get it immediately after the hard reset.
So far (and about 10 min.) everything is looking good!
I will play with it for a while and let you know.
Thanks for the help!!

x01001010x said:
Well... that was a little different. I didn't get the customization the first run after the flash. I did however get it immediately after the hard reset.
So far (and about 10 min.) everything is looking good!
I will play with it for a while and let you know.
Thanks for the help!!
Click to expand...
Click to collapse
No problem and welcome to the wonderful world of hard drug.... ummm I mean flashing, yeah flashing thats it
now that your hooked you can forget about sleep, family, a life, anything else
MUH HA HA HA HA ha hahhahahahahahahahahhaha
Detroit Doug

Oh ya! That looks like it did the trick.
It has been running since my last post without locking up... the internet works... and it is slick!
Thanks for your help Detroit_Doug and jmitr! I appreciate it.

Stuck at the "Touch Pro2" Screen after ROM Flash

Well I just flashed my first ROM and thought I followed everything to the letter. I ran HardSPL, it completed, and I verified that it was done in the bootloader screen. Then I downloaded Energy 23544 with MaxManila Mar 09. Sync'ed with WMDC, Ran Custom RUU, It says it flashed ok. Now it just sits at the "Toch Pro2" startup screen. Can anyone tell me what I missed and if there is anyway to fix it?
Thanks
Steve

stisinai said:
Well I just flashed my first ROM and thought I followed everything to the letter. I ran HardSPL, it completed, and I verified that it was done in the bootloader screen. Then I downloaded Energy 23544 with MaxManila Mar 09. Sync'ed with WMDC, Ran Custom RUU, It says it flashed ok. Now it just sits at the "Toch Pro2" startup screen. Can anyone tell me what I missed and if there is anyway to fix it?
Thanks
Steve
Click to expand...
Click to collapse
Need more info like who is your carrier...the problem you are describing sounds like you flashed a gsm rom (t-mobile and at&t) to a cdma phone (sprint and verizon). If that is the case you need to flash back to stock rom then grab the energy rom from here for the CDMA phone
http://forum.ppcgeeks.com/showthread.php?t=86489
hopefully you did not brick your phone...good luck

Seems like you've done everything right. Just note that first time flashes usually take a while to load on the first boot before customization procedures.
If the phone doesn't budge, try a hard reset. To Hard reset your phone, Turn it completely off (remove and reinsert battery if needed), then hold down the Send and End and the power button. It should load the SPL and then ask you if you want to Hard Reset, press the Volume Up key to accept.
If the Hard Reset doesn't work, download a stock ROM, and flash that via the bootloader. If the stock ROM works, try to flash the Energy ROM again.
To enter the bootloader, Hold down the Volume Down key while turning on your phone. or hold it down and while pressing the reset button.
Hopefully you can get this sorted.

eichenberg said:
Need more info like who is your carrier...the problem you are describing sounds like you flashed a gsm rom (t-mobile and at&t) to a cdma phone (sprint and verizon). If that is the case you need to flash back to stock rom then grab the energy rom from here for the CDMA phone
http://forum.ppcgeeks.com/showthread.php?t=86489
hopefully you did not brick your phone...good luck
Click to expand...
Click to collapse
That could be the case, but he sucessfully flashed a HardSPL, so he could just enter the bootloader and flash his stock ROM to continue operation of the phone.
When he responds about who his carrier is and which TP2 he has, we'll go from there.

I am on US Cellular and I did use the GSM ROM for some stupid reason. I can load the bootloader screen and am downloading the correct ROM now. I assume I then follow the load from microSD card procedures?
Thanks guys
You are lifesavers if I can get past this

stisinai said:
I am on US Cellular and I did use the GSM ROM for some stupid reason. I can load the bootloader screen and am downloading the correct ROM now. I assume I then follow the load from microSD card procedures?
Thanks guys
You are lifesavers if I can get past this
Click to expand...
Click to collapse
Yes, with HardSPL you can flash the nbh file from the microSD card, but I recommend you flash using your PC via USB. It would save you the hassle of trying to find and extract the NBH.

Well it wouldn't update via the PC because it wouldn't connect. I did find and rename the nbh file and put it on another sd card. It is updating now with the stock ROM. Then its back to the drawing board if this works.
Thank - I'll update and give other noob idiots my story when all is good. (still having fingers crossed)

stisinai said:
Well it wouldn't update via the PC because it wouldn't connect. I did find and rename the nbh file and put it on another sd card. It is updating now with the stock ROM. Then its back to the drawing board if this works.
Thank - I'll update and give other noob idiots my story when all is good. (still having fingers crossed)
Click to expand...
Click to collapse
Hmm... HardSPL usually enters USB mode when the bootloader is run and a USB cord is connected, but I'm glad you got your phone flashing either way. Good luck.

My problem was definitely the wrong ROM version.
For anyone else as dumb as me, this is what my problem was...
Everything seemed to flash ok originally (the program said it was successful). Then it restarted and the phone would not go past the "Touch Pro2) screen. There was nothing else on the screen.
and here is what I did to fix it...
Got another SD card and formated to fat32.
Extracted the proper original ROM.exe file using winrar.
Placed the .ngh file in the root of the card with the name rhodimg.nbh
Insert the sd card in the phone and restart into the bootloader screen
When it asked if I wanted to load the ROM, I of course did what it said
When it finished I removed the sd card and pressed the reset button
It took a while but everything loaded ok.
Then I started over with the ROM I wanted (this time using the correct CDMA version). Again everything seemed to go ok. This time when it rebooted, on the "touch pro2" boot screen there was additional text at the bottom indicating the cooked ROM I installed.
Thank you to everyone who helped me understand what I did wrong and I hope noone else is as dumb as me, but if you are there is hope.
Thanks
Steve

stisinai said:
My problem was definitely the wrong ROM version.
For anyone else as dumb as me, this is what my problem was...
Everything seemed to flash ok originally (the program said it was successful). Then it restarted and the phone would not go past the "Touch Pro2) screen. There was nothing else on the screen.
and here is what I did to fix it...
Got another SD card and formated to fat32.
Extracted the proper original ROM.exe file using winrar.
Placed the .ngh file in the root of the card with the name rhodimg.nbh
Insert the sd card in the phone and restart into the bootloader screen
When it asked if I wanted to load the ROM, I of course did what it said
When it finished I removed the sd card and pressed the reset button
It took a while but everything loaded ok.
Then I started over with the ROM I wanted (this time using the correct CDMA version). Again everything seemed to go ok. This time when it rebooted, on the "touch pro2" boot screen there was additional text at the bottom indicating the cooked ROM I installed.
Thank you to everyone who helped me understand what I did wrong and I hope noone else is as dumb as me, but if you are there is hope.
Thanks
Steve
Click to expand...
Click to collapse
No biggie, you're very welcome. We all are noobs at some point of our existance and we all make mistakes. I'm just glad you were able to learn from yours and recover, in addition to pointing out to others what went wrong. Have fun with your new ROM.
~Joseph

stisinai said:
My problem was definitely the wrong ROM version.
For anyone else as dumb as me, this is what my problem was...
Everything seemed to flash ok originally (the program said it was successful). Then it restarted and the phone would not go past the "Touch Pro2) screen. There was nothing else on the screen.
and here is what I did to fix it...
Got another SD card and formated to fat32.
Extracted the proper original ROM.exe file using winrar.
Placed the .ngh file in the root of the card with the name rhodimg.nbh
Insert the sd card in the phone and restart into the bootloader screen
When it asked if I wanted to load the ROM, I of course did what it said
When it finished I removed the sd card and pressed the reset button
It took a while but everything loaded ok.
Then I started over with the ROM I wanted (this time using the correct CDMA version). Again everything seemed to go ok. This time when it rebooted, on the "touch pro2" boot screen there was additional text at the bottom indicating the cooked ROM I installed.
Thank you to everyone who helped me understand what I did wrong and I hope noone else is as dumb as me, but if you are there is hope.
Thanks
Steve
Click to expand...
Click to collapse
Glad you got your TP2 back, it's not a nice paperweight

Badwolve1 said:
it's not a nice paperweight
Click to expand...
Click to collapse
Actually as paperweight's go, it's a damn sexy one
But I would prefer a working phone any day

I do have to say that I am drooling at the possibilities of this phone. Just have to take things a little slower.

I did the same thing basically. I tried a gsm rom on my us cellular phone. didnt know that they conflict at that point.
what rom do i need to flash to get my phone back?

Here is a good place to start...
http://forum.ppcgeeks.com/forumdisplay.php?f=98
I am very happy with the Energy Rom's, but that is a whole different discussion.
Or you can go back to the stock ROM which you can get at ppcgeeks also.

joseph881 said:
Seems like you've done everything right. Just note that first time flashes usually take a while to load on the first boot before customization procedures.
If the phone doesn't budge, try a hard reset. To Hard reset your phone, Turn it completely off (remove and reinsert battery if needed), then hold down the Send and End and the power button. It should load the SPL and then ask you if you want to Hard Reset, press the Volume Up key to accept.
If the Hard Reset doesn't work, download a stock ROM, and flash that via the bootloader. If the stock ROM works, try to flash the Energy ROM again.
To enter the bootloader, Hold down the Volume Down key while turning on your phone. or hold it down and while pressing the reset button.
Hopefully you can get this sorted.
Click to expand...
Click to collapse
O Bless you Joesph881.I had same problem.Flashed stock Rom in bootloader.My life is back to normal.Again,thanks.

stisinai said:
Well I just flashed my first ROM and thought I followed everything to the letter. I ran HardSPL, it completed, and I verified that it was done in the bootloader screen. Then I downloaded Energy 23544 with MaxManila Mar 09. Sync'ed with WMDC, Ran Custom RUU, It says it flashed ok. Now it just sits at the "Toch Pro2" startup screen. Can anyone tell me what I missed and if there is anyway to fix it?
Thanks
Steve
Click to expand...
Click to collapse
hit the red reset button on the right. mine did that also, and that is what I did, and it came back up without a problem.

STOCK ROM
FYI, the stock ROM, original ship ROM can be found here at the htc mobile phone product support page. It comes as an *.exe and you double click once in the bootloader screen and it works
I had a problem where I flashed with a new rom, and it went to the white screen. I had to flash with the original ROM and it came back to life! yay.

Touch Pro 2 stuck on HTC screen

Okay, my touch pro 2 is messed up beyond belief. I tried to install a custom rom and I did it all by the instructions. Then it turned off when it was restarting and afterwards once it was restarting it just stayed on the HTC screen. It will not go any further. I have hard reset the thing many times along with trying to reinstall the roms. I honestly hope there is something that I can do... I have also tried doing the SD flash. Either way please comment ASAP.

Bootloader Info
RHOD400 32M SS-BC
SPL-1.00.OliNex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
Turbro HW/Turbo SW
TP MFG DATA
496,521 764,841
763,207 245,198
227,841 Calibrated
This is what is shown in bootloader

the rhod400 is a cdma device, go to the tp2 cdma development and flash a rom from there
this is only for GSM devices

Is that why it would be stuck in the HTC Screen everytime?

pablotheescobar said:
Is that why it would be stuck in the HTC Screen everytime?
Click to expand...
Click to collapse
yeah, you installed a GSM rom, which is not compatible with your device
here is the link to the CDMA forum, good luck
http://forum.xda-developers.com/forumdisplay.php?f=517

Well, the thing is that I have tried to flash ROMS on there before and it still goes to the same screen. I don't know what I need to do because every forum is just saying try flashing it and I already have tried that and it goes to the same screen every time.

pablotheescobar said:
Well, the thing is that I have tried to flash ROMS on there before and it still goes to the same screen. I don't know what I need to do because every forum is just saying try flashing it and I already have tried that and it goes to the same screen every time.
Click to expand...
Click to collapse
did you run the "task 29" tool before flashing?

No, I never did do that... In the tutorial it never had that. I had to unlocked it with the hardSPL and I did that and it just restarted fine and then once I did that I installed the other one and it did the custom Rom and this is the outcome of that...

pablotheescobar said:
No, I never did do that... In the tutorial it never had that. I had to unlocked it with the hardSPL and I did that and it just restarted fine and then once I did that I installed the other one and it did the custom Rom and this is the outcome of that...
Click to expand...
Click to collapse
just do that before every flash and you'll be fine

Yeah, but my phone won't load anymore. It turns on and stays at the white HTC screen.

ok what task 29 does is deleting everything on the internal storage, read the cdma faq, so dont expect it to boot, click the button sequence that gets you in the boot loader, connect to usb, run the update utility, and profit. can't be anymore simple
good luck

NEVERMIND!
I installed the LEAD ROM, and it went through the ROM process and it came to the HTC screen and then it started loading I was so happy! Thanks for your guys help!

pablotheescobar said:
I installed the LEAD ROM, and it went through the ROM process and it came to the HTC screen and then it started loading I was so happy! Thanks for your guys help!
Click to expand...
Click to collapse
ur welcome, don't forget the thx button

pablotheescobar said:
Yeah, but my phone won't load anymore. It turns on and stays at the white HTC screen.
Click to expand...
Click to collapse
have you formatted your micro sd card to fat32?
then flash the rom from the sd card.
bro heres what you gotta do to fix your pfoblem, first format your sd card to fat32 then copy the nbh file onto the card, rename it to RHODIMG insert the sd card then enter the boot loader menu by first taking out the battery, and reinserting it. now with the phone off hold the volume down button while pressing the power button this forces the device into bootloader mode. your screen WILL read RHODIMG os. now press the power button again to install whatever rom you want but I would recommend using a stock rom or one that you know works, ie- from past experience.
trust me bro do this and all will be fine again,
HAPPY FLASHING
oh dont forget to press the soft reset button once the rom installation is done when the screen says installation successful,
once again HAPPY Flashing>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
next thing is to try a different cable.
try this and if it doesnt work pm me and I will walk you through some more complicated steps. I have an epic now so I am not on this page much anymore. but I am very familiar with the rhodium. and like to come by every once in a while to see if anyone needs any help!

sapperpipo said:
have you formatted your micro sd card to fat32?
then flash the rom from the sd card.
bro heres what you gotta do to fix your pfoblem, first format your sd card to fat32 then copy the nbh file onto the card, rename it to RHODIMG insert the sd card then enter the boot loader menu by first taking out the battery, and reinserting it. now with the phone off hold the volume down button while pressing the power button this forces the device into bootloader mode. your screen WILL read RHODIMG os. now press the power button again to install whatever rom you want but I would recommend using a stock rom or one that you know works, ie- from past experience.
trust me bro do this and all will be fine again,
HAPPY FLASHING
oh dont forget to press the soft reset button once the rom installation is done when the screen says installation successful,
once again HAPPY Flashing>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
next thing is to try a different cable.
try this and if it doesnt work pm me and I will walk you through some more complicated steps. I have an epic now so I am not on this page much anymore. but I am very familiar with the rhodium. and like to come by every once in a while to see if anyone needs any help!
Click to expand...
Click to collapse
look above it says problem solved, and that ungrateful n00b did not even hit the thanks button, don't waste your breath

Yeah your right.
Sent from my SPH-D700 using XDA App

Hey, I am going through the same thing too. I hope that someone can really help. I am a beginner when it comes to this.
pablotheescobar said:
Okay, my touch pro 2 is messed up beyond belief. I tried to install a custom rom and I did it all by the instructions. Then it turned off when it was restarting and afterwards once it was restarting it just stayed on the HTC screen. It will not go any further. I have hard reset the thing many times along with trying to reinstall the roms. I honestly hope there is something that I can do... I have also tried doing the SD flash. Either way please comment ASAP.
Click to expand...
Click to collapse

Device stuck on HBOOT after installing KitKang ROM

Hello there!
I have never posted on XDA and I hope this is the right section.
So here it is guys:
I have recently installed the KitKang ROM from a tutorial on this forum (XDA LINK) for a friend of mine on his HTC Desire ...
Now whilst the phone was in perfect running order, I even managed to create an EXT partition for apps on the SD card and installed a2sd, worked like a dream for a few days ... when he was watching youtube one day the phone rebooted and since then only boots into HBOOT, the volume keys do not work to navigate, the power button does nothing, I can't even get into recovery mode.
I have spent 3-4 hours carefully reading forum posts and tried everything ... nothing works as the phone is not even being recognized when plugged in to the PC with USB.
This is the troubleshooting guide I used along with many others! LINK
I've tried my best to resolve this problem and NOTHING is working
I only get the white HBOOT screen and everything else is unresponsive (tried putting the Alpharev img on the SD, that doesn't work either).
JUST TO RECAP:
- No recovery available
- Unresponsive HBOOT
- Phone does not work with USB (only charges)
Can someone please assist me, I will be very grateful!
Info:
-REVOLUTIONARY-
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
(the date which is wrong)
I am not a complete noob when it comes to android but not very advanced yet.
I just want the phone to go back to stock or any other STABLE ROM.
Thank you very much for all your help in advance.

Try booting directly into fastboot (using power + back). Then plug it into a PC via usb cable. Does it say "FASTBOOT USB" on the screen?

Chromium said:
Try booting directly into fastboot (using power + back). Then plug it into a PC via usb cable. Does it say "FASTBOOT USB" on the screen?
Click to expand...
Click to collapse
Hey, thanks for a reply!
I just tried that now but nothing happens, it boots straight into HBOOT and it is still unresponsive, my computer still doesn't recognize the phone. Tried different ports and cables too... have you got any other suggestions? Maybe there is something I'm doing wrong.

Can anyone else help? I will appreciate it a lot!
Sent from my SM-N9005 using Tapatalk

Try flashing the 2.3 RUU using the PB99IMG method.

I have already tried this method, my bootloader doesn't read the file, gives me back a few errors.
Sent from my SM-N9005 using Tapatalk

markar07 said:
I have already tried this method, my bootloader doesn't read the file, gives me back a few errors.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
What errors??
Make sure the PB99IMG.zip file is on the root of ur sdcard (not inside a folder) thats prob why u get the errors in green writing
@Chromium look at u with ur 4700 thanks good man, well deserved
just wish i had a desire to test ur work.. good on ya buddy, keep it up. seen ur "facepalm" comment too in RC thread hahaha D'OH!!!

jmcclue said:
@Chromium look at u with ur 4700 thanks good man, well deserved
just wish i had a desire to test ur work.. good on ya buddy, keep it up. seen ur "facepalm" comment too in RC thread hahaha D'OH!!!
Click to expand...
Click to collapse
Hah, thanks This will make you laugh. You and @eddiehk6 were the first people to help me when I was a complete n00b, lol.

Chromium said:
Hah, thanks This will make you laugh. You and @eddiehk6 were the first people to help me when I was a complete n00b, lol.
Click to expand...
Click to collapse
hahaha the good old days when we were all complete and utter noooobs :cyclops: just shows what reading, and taking advice does..... pitty no one else seems to get the idea!!

No, i put it on the root or my sd card, i know what the root directory is. It is simply not responding to anything. -_-
Sent from my SM-N9005 using Tapatalk

Chromium said:
Hah, thanks This will make you laugh. You and @eddiehk6 were the first people to help me when I was a complete n00b, lol.
Click to expand...
Click to collapse
Woah can't believe that's you. You've come a long way since then :good:
markar07 said:
No, i put it on the root or my sd card, i know what the root directory is. It is simply not responding to anything. -_-
Click to expand...
Click to collapse
Strange it should detect it even if it won't properly flash. Double check:
It's named:
- "PB99IMG.zip" exactly, think it even requires all upper case.
- not "PB99IMG.zip.zip".
I don't mean to sound insulting with the second one, but I've seen it done

Hey, thanks for your reply. Unfortunately the phone doesn't detect the file, I am 100% sure. What ill do is get another sd card, maybe my one is corrupted somehow.
Sent from my SM-N9005 using Tapatalk

eddiehk6 said:
Woah can't believe that's you. You've come a long way since then :good:
Strange it should detect it even if it won't properly flash. Double check:
It's named:
- "PB99IMG.zip" exactly, think it even requires all upper case.
- not "PB99IMG.zip.zip".
I don't mean to sound insulting with the second one, but I've seen it done
Click to expand...
Click to collapse
Okay, I have gone a bit further than last time, I have somewhat better results, changed the SD card and the image loaded.
Now I am stuck on this (Please see the attached image)
The phone does not go any further and I cannot navigate through this list if I am even supposed to be able to do that.

markar07 said:
Okay, I have gone a bit further than last time, I have somewhat better results, changed the SD card and the image loaded.
Now I am stuck on this (Please see the attached image)
The phone does not go any further and I cannot navigate through this list if I am even supposed to be able to do that.
Click to expand...
Click to collapse
Can't figure this out to be honest.
When you boot into bootloader with the PB99IMG.zip image, it should do a scan, then find it.
Then it should give you the option 'do you want to flash it?' or something like that, press power to select I think. Was so long ago since I had to do this myself. Does it resemble anything like this?

Make sure u put the zip in the root of sd.
Sent from my HTC Desire using xda app-developers app

@lilsafbig - dude, it has already found the file and loaded it.
@eddiehk6 - nah man, it's giving me options like on the other image after loading the file, which it never did before i tried the new sd card. Its strange, none of the physicall buttons work in this stupid HBOOT.
Sent from my SM-N9005 using Tapatalk

markar07 said:
@lilsafbig - dude, it has already found the file and loaded it.
@eddiehk6 - nah man, it's giving me options like on the other image after loading the file, which it never did before i tried the new sd card. Its strange, none of the physicall buttons work in this stupid HBOOT.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Did u check the MD5sum of the file? Cant really think of why it reads it then not let u choose to flash it.

Yes I did. Everything is fine with the file. I dont get it either ... I started suspecting the buttons being broken ... but it doesnt explain why the phone turns on yet cant use the power button to select any options. The volume buttons do not function at all. I get into HBOOT just by pressing the ON button and then it turns on.
Sent from my SM-N9005 using Tapatalk

I had the same problem and what i did was first flashed in fastboot mode the "alpha jelly", try to search on that because thats the requirement on flashing kitkang and i flashed another recovery using fastboot mode. What i flashed is the latest CWM and them go recovery then flashed the 4.4.2 rom. and it worked for me. it should for you too.

desdesu said:
I had the same problem and what i did was first flashed in fastboot mode the "alpha jelly", try to search on that because thats the requirement on flashing kitkang and i flashed another recovery using fastboot mode. What i flashed is the latest CWM and them go recovery then flashed the 4.4.2 rom. and it worked for me. it should for you too.
Click to expand...
Click to collapse
Did u even bother to read any posts?