[FIX] Remove BT Device Volume Notification - Touch Pro2, Tilt 2 Windows Mobile General

Firstly, thanks to Wensing for the original post on the Bluetooth Disconnection Notification.
I was becoming annoyed with the notification telling me that I had to adjust the volume on the BT Device and not on my handset. So starting with Wensing's post I added the following - and it worked for me.
CREATE THIS KEY
[HKEY_CURRENT_USER\ControlPanel\Notifications\{1CBF334F-99CC-4835-B930-E3568FE5B2C7}]
**When I post this there seems to be a space in the key name the first part should read 1CBF334F
ADD THESE SUB KEYS
"AvailableOptions"=dword:00000009
"Default"="Volume Warning"
"Options"=dword:00000000
Now go to Sounds & Notifications and you should have an option volume warning. Disable any notifications and you should no longert get the annoyiung warning.

Thanx, working fine.
You may have to remove the space in key name : {1CBF334F-99CC-4835-B930-E3568FE5B2C7}

Thanks so much for sharing, that was really getting on my nerves!

I've tried this on my phone. I now have the option on my sound settings. I made sure nothing is checked on...but I still get the message...so annoying....any ideas?

chapinrico said:
I've tried this on my phone. I now have the option on my sound settings. I made sure nothing is checked on...but I still get the message...so annoying....any ideas?
Click to expand...
Click to collapse
Are you getting the message popup or are does the message appear in the HTC Notification manager.
It still appears in the notification manager on my TP2 but the annoying popup has gone.

Re: Remove BT Device Volume Notification
Hi @all,
on my HTC TP2 with a dutch rom the registry entry is:
\HKEY_CURRENT_USER
\Software
\HTC
\NOTIFICATIONMANAGER
\{1CBF334F-99CC-4835-B930-E3568FE5B2C7}
and NOT
\HKEY_CURRENT_USER
\ControlPanel
\Notifications
\{1CBF334F-99CC-4835-B930-E3568FE5B2C7}
Only for information and corectnes for all possible entries.

mike2nl said:
Hi @all,
on my HTC TP2 with a dutch rom the registry entry is:
\HKEY_CURRENT_USER
\Software
\HTC
\NOTIFICATIONMANAGER
\{1CBF334F-99CC-4835-B930-E3568FE5B2C7}
Click to expand...
Click to collapse
Ditto for my US T-Mobile Rhodium
However, after making the modifications, I don't have any such options in the Sounds & Notifications section.
I'm using Resco Registry Editor, and there is no option to add a 'sub key', so I just added DWORD Value and edited the existing '(Default)' Value. Is this correct, or should I have added Keys with Values underneath?
Thanks!

I tried this on my phone. I get the option volume warning but checking/unchecking boxes does nothing unfortunately.
I made changes to the registry for the first time, so maybe i made a mistake there. Could you please check if this registry edit is correct? Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

dahoarty said:
Firstly, thanks to Wensing for the original post on the Bluetooth Disconnection Notification.
I was becoming annoyed with the notification telling me that I had to adjust the volume on the BT Device and not on my handset. So starting with Wensing's post I added the following - and it worked for me.
CREATE THIS KEY
[HKEY_CURRENT_USER\ControlPanel\Notifications\{1CBF334F-99CC-4835-B930-E3568FE5B2C7}]
**When I post this there seems to be a space in the key name the first part should read 1CBF334F
ADD THESE SUB KEYS
"AvailableOptions"=dword:00000009
"Default"="Volume Warning"
"Options"=dword:00000000
Now go to Sounds & Notifications and you should have an option volume warning. Disable any notifications and you should no longert get the annoyiung warning.
Click to expand...
Click to collapse
This worked on my ATT tilt 2. I tried both methods ( this one and the one posted above. ) While it does get rid of the pop up now to find away to stop it all together lol

Thanks so much!!
I don't have this issue with any Jabra A2DP enabled Bluetooth handsfree, but with all other ones I have, I get this annoying loud alert sound with the message every time A2DP service is activated. This tweak gets rid of the audio alert and message popup - it's still there in the HTC Notification Manager, but at least now I can connect to my non-Jabra A2DP Bluetooth handsfree devices in peace.

thrpst said:
Click to expand...
Click to collapse
Can anyone please check this registry edit, whether its correct? I would much appreciate that. Thank you.

up ^^^^^^^

thrpst said:
Can anyone please check this registry edit, whether its correct? I would much appreciate that. Thank you.
Click to expand...
Click to collapse
Remove the space in the GUID. "1CBF 33" should be "1CBF33". After that it should work for you.

I'm not really comfortable doing reg edits. The notifications were going off every few minutes and driving me nuts! I'm not sure I did them correctly, but seems to work. I had to hard reset after the first try, it was totally wrong, thank goodness for Sprite Backup.
Thanks much.

Related

[UPDATE NEW ICONS]12 button full screen Action screen

..................
Finally!!!
Thanks a lot for your work. I am really looking forward to the one with the better icons. In any case it works perfect as an initial release.
Furthermore, it's good that apart from the GPS button I managed to re-assign the File Explorer which was originally assigned to the default one.
Thanks!
We look forward to the new skin ...
great work man ...
would love to see a new vs with new icons and default background.
thanks.
Very usefull application!
Could you use more "ordinary" icons and font?
Thanks in advance!
Agreed. Finally we get one.
Am grateful for your work but we all customize our phones in defferent ways.
Can you upload the png file and xml file so we can create our own icons, background in Photoshop and links in xml?
Please?
Pretty please lol!
Silly question, I guess.. but what initiates the action screen?
Do you have to assign it to a button or is it linked to the status screen that appears when you click the battery icons or something?
Kizmet said:
Silly question, I guess.. but what initiates the action screen?
Do you have to assign it to a button or is it linked to the status screen that appears when you click the battery icons or something?
Click to expand...
Click to collapse
Right soft button in manila home
I could not get my iGO8 to work from the nav icon
taiseer999 said:
Right soft button in manila home
I could not get my iGO8 to work from the nav icon
Click to expand...
Click to collapse
to make the gps button work go to registry to the key i wrote to the 1st post and input the path and the executable to work(only works for now with .exe files)
i.e. \windows\poutlook.exe or \Storage Card\IGO8\igo8.exe
you must write it without ""
I will try my best to release tommorow a new one with much better icons
if you want you can provide me with png icons of 159x120height (pixels) or 120x120 2 frames for each icon (1 for focus 1 for pressed)
I had the same with my IGO8
Now it is working, the only thing I've changed is making the .exe extension lowercase.
Great app btw. Looking forward to some new skins.
edit:
I have a requests:
Is it possible to make Bluetooth discoverable when you turn it on?
I've already editted it by assigning GekoNewCal to the appointments (and IGO8), but I don't know how to apply this change for the BT icon.
metkosas said:
nice icons
come to my thread to have them all together.
Click to expand...
Click to collapse
Thanks metkosas for your kind invitation
here is my action acreen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
download and details are available here:
http://forum.xda-developers.com/showthread.php?t=473059
Enjoy
Icons are very nice!!!!!
I think Kostas, you don't need something else
How we can put our background?
I would like to look like one more tab.
One more bravo for metkosas for his work
Very nice Ammar, I like the shutdown button. It works very good, did you use a special program for it?
----------------
Gold_diamond icons
Hello.
Thenks for nice work.
Cud you please make one another act_sreen with God_Jevilerry icons?
In case you use ThumbCal and want to re-assign the buttons to open ThumbCal's functions, then:
HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\ActionScreen\APP_3
Param: calendar -new
Path \Program Files\ThumbCal\ThumbCal.exe
HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\ActionScreen\APP_4
Param: tasks -new
Path \Program Files\ThumbCal\ThumbCal.exe
and then soft reset.
The same applies if you want to re-map File Explorer (no need for parameters there), GPS (same) or notepad (leave the parameter as it is and it should work perfectly - I re-assigned the notes button to VSNotepad2 by leaving the -n param and it opens the new note)
@metkosas: I think it would be nice to add in the first post that the application is placing itself on its own on the right soft key so if people have the right soft key reassigned know beforehand and also to avoid questions "I installed the application. Where can I find it now?"
Great utility!!
Only one question.. How can i change the soft key name "Action" to another name ?
Thanks a lot
Frank
mainsail said:
Great utility!!
Only one question.. How can i change the soft key name "Action" to another name ?
Thanks a lot
Frank
Click to expand...
Click to collapse
Go to registry hklm-software-htc-manila and there is homeLSKpath + homeLSKtext (for left softkey)
for right softkey hklm-software-htc-manila homeRSKtext + homeRSKpath
for change the text only you change the home(LR)SKtext only.
Thanxx man !
Sorry, can Yuo help me please?
I have 2 e-mail accaunts instaled:
1. Outlook (exchange)
2.Gmail accaunt
So, when i press on mail icon - it starts Gmail (new e-mail From: Gmail accaunt)
Is ther a possibility make to start Outlook e-mail instade?

Where to download this cool colored topbar?

Please help me, this is in used by many rom chef.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dutty's
And will it also work on Dutty's 2.6 and so on?
I like it to.
barshad said:
Please help me, this is in used by many rom chef.
Click to expand...
Click to collapse
Exactly there, where you got the screen.
Look in the thread "Rom" Panosha
Dude10 said:
Exactly there, where you got the screen.
Look in the thread "Rom" Panosha
Click to expand...
Click to collapse
Want this cab only, not the entire rom,
I believe it's "cashrmb modifier Brians". Just use the search button to find it.
look here
http://forum.ppcgeeks.com/showthread.php?t=54514
It's Brians' taskbar.
You can find it on this forum, herre: http://forum.xda-developers.com/showthread.php?t=485548
works with dutty latest roms too. The only thing I'm not keen on is that it changes the volume control to what I believe should be on a diamond. It's somewhat squashed and now I can't get a single volume control back, it's always split into system and ring even though I have the single volume setting switched on. If anyone knows how to fix this I would love you forever!!!
crankshaft said:
works with dutty latest roms too. The only thing I'm not keen on is that it changes the volume control to what I believe should be on a diamond. It's somewhat squashed and now I can't get a single volume control back, it's always split into system and ring even though I have the single volume setting switched on. If anyone knows how to fix this I would love you forever!!!
Click to expand...
Click to collapse
depends on what/who's ROM u have. on my ROM goes like this:\
settings/sound/volume control>single volume>use single ring/system volume>on-off
don't forget: you'll love me for ever!
KukurikU said:
depends on what/who's ROM u have. on my ROM goes like this:\
settings/sound/volume control>single volume>use single ring/system volume>on-off
don't forget: you'll love me for ever!
Click to expand...
Click to collapse
I'd love to love ya but it doesn't work for me! It did before I installed the coloured top bar. I could change between single and twin(?) volume controls. Also, as I mentioned the volume control screen is somewhat squashed, see screen shot attached.
If I uninstall the top bar single volume control can be used again.
I'm using Dutty 2.7 rom by the way.
Ta
Thank you all,
Yes It's Brians' taskbar ->http://forum.xda-developers.com/showthread.php?t=485548
And yes now I am using it on Dutty's 2.7
barshad said:
Thank you all,
Yes It's Brians' taskbar ->http://forum.xda-developers.com/showthread.php?t=485548
And yes now I am using it on Dutty's 2.7
Click to expand...
Click to collapse
Barshad, can you tell me if you can still use the single volume control?
settings tab > sounds > single volume > yes
then when you use the volume control on the side do you still get it split between system and ring?
Thanks mate
I'm using dutty 2.8 and also can't use single volume control with this taskbar. Need to have HTCVolumeControl in v2.1. How to do this?
I am on EnergyROM HD Build 40909 and i have the option to choose between single and double volume, but it doesnot matter which one i activate.
It stays double...
crankshaft said:
Barshad, can you tell me if you can still use the single volume control?
settings tab > sounds > single volume > yes
then when you use the volume control on the side do you still get it split between system and ring?
Thanks mate
Click to expand...
Click to collapse
I am using Dutty 2.7 there is no single sound control (not even in settings), Ringer and System volumes on separate page, but i don't care about that, i can live with it.
I am not going to use later builds of Dutty I like the colors of home screen of Dutty 2.7, with these control, this is the most beautiful home screen I've ever seen on HD.

SMS reply problem with Touch Flo - drops leading "+"?

Hi
I've noticed a problem with my TP2, wondered if anyone else had it and had found a way round.
I store all my contacts as international codes (i.e. +447799xxxxxx etc) so I don't have to mess about when on holiday. However I've noticed a problem with this and the Touch Flo interface.
When I get an SMS I see it on the touch flo page, double click and i see the touch flo SMS interface as follows: -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However when I send, it drops the + from the beginning of the message. Concequently, it tries to send to 4417799xxxxxx which is invalid and goes into my drafts folder.
If however from the front page I choose the "All Messages" soft key and reply to the message in the standard threaded WM6.1 interface: -
then it works fine.
Any idea how to fix this (without removing +44 from all my contacts!)
Cheers, Sy
Use the search
http://forum.xda-developers.com/showthread.php?t=522535
I described the same problem but nog answer yet.
Just a clue...
I am not a friend of manila or tp2 but just an idea - maybe you have something wrong with the regional settings?
I also had this problem..
I´m wondering, did you install .NET CF3.5?
darfri said:
Just a clue...
I am not a friend of manila or tp2 but just an idea - maybe you have something wrong with the regional settings?
Click to expand...
Click to collapse
That's allready mentioned in my thread (see the link above) and no there is nothing wrong with it
Sjuust said:
I also had this problem..
I´m wondering, did you install .NET CF3.5?
Click to expand...
Click to collapse
Yes, but before i had the same problem and after also.
remember notify HTC support !
I'm not sure but I think something goes wrong when restoring contacts via sprite-backup. I noticed an ';' behind or in front of a phone number once.
Try editing the contact, selecting and saving the phone number and see if it happens again.
Sjuust said:
I'm not sure but I think something goes wrong when restoring contacts via sprite-backup. I noticed an ';' behind or in front of a phone number once.
Try editing the contact, selecting and saving the phone number and see if it happens again.
Click to expand...
Click to collapse
I don't use sprite-backup, and i have the problem to, so that's not a good solution
AlCapone said:
remember notify HTC support !
Click to expand...
Click to collapse
Forget it. They are interested in selling not fixing. Terrible customer support
I don't use Sprite Backup, but my contacts are synced OTA to Exchange, whether that makes a difference or not I don't know.
I do have CF3.5 installed, but don't know whether I had the problem before (I installed it when I first got the phone).
Strangely the problem also seems a little intermittent - for example this morning I did a test reply using the TF interface, and it worked okay?
I will send a message to HTC though so hopefully they'll look into a fix!
Oh, and just noticed my regional settings were set to US not UK, so I've changed this to see if it makes a difference. Though the regional settings don't seem to make any direct reference to phone number format so we'll have to see if it actually makes a difference.
Further investigation suggests this seems to happen on the 2nd reply. i.e. in an SMS thread I reply to a message and it's okay....reply again (before another from sender) and the + gets dropped.
gingerprince said:
Further investigation suggests this seems to happen on the 2nd reply. i.e. in an SMS thread I reply to a message and it's okay....reply again (before another from sender) and the + gets dropped.
Click to expand...
Click to collapse
as already mentioned at http://forum.xda-developers.com/showthread.php?t=522535 read it, and see that all the possible options that are discussed here, are tried already
why all those double threads

Owner information in WinMo 6.5

Seems HTC has removed the basic owner information entry in Windows Mobile 6.5. I looked at Microsofts Windows Phone site and they say it's there..searched my phone and found the icon, but not the place to set it. anyone got this figured out cause I can't register my programs with out it. I'm sure I'm missing something.
hi..Registry
HKEY_LOCAL_MACHINE\ControlPanel\Owner\Hide and make the value 0.
There are 2 options.
1. Edit the registry key "HKEY_LOCAL_MACHINE\ControlPanel\Owner\Hide" to 0.
2. Disable HTC Sense and enable Owner Info plugin in the Today settings. You should then be able to access it via the Today screen.
On the Tilt2, it's located in Start > Settings > Personal > Owner Information.. or am I missing something?
owner\control panel
ohyeahar said:
There are 2 options.
1. Edit the registry key "HKEY_LOCAL_MACHINE\ControlPanel\Owner\Hide" to 0.
2. Disable HTC Sense and enable Owner Info plugin in the Today settings. You should then be able to access it via the Today screen.
Click to expand...
Click to collapse
thank you for show the 2nd option, it worked easy and I needed it. Tks
Same here, how stupid to hide this sooo much.....
what's the difference between touchflo3d and sense? and how do i disable them to use the original 6.5 interface? i found that 6.5 uses an average of 70%+ of memory whereas 6.1 used about 10%+ lesser. clearing the memory using htcaddict's cleanram also couldn't get it down to 50%+.
Still having probs with owner info
Hi all - new to this forum. I have some software that needs owner info to be set. I've tried the registry change and soft reset but that changes nothing it seems. I don't have the option of checking an owner info box in today setting so I'm at a loss as to where to go next - any help appreciated#
Peter
PS - I seem to have lost the owner section under control panel in Registry altogether now - what should the entries be please?
infuse said:
... and how do i disable them to use the original 6.5 interface? ...
Click to expand...
Click to collapse
Start > settings > Today > Items (tab) then uncheck TouchFlo3d
Another way to get owner info on HD2
Solved my own problem - there's a "me" entry in the phone book - I put my name in and it had the same effect as setting owner info
Now we get to answer all the questions that were already answered back in October for all the "official" upgraders who just now upgraded. I guess the Search function is just as difficult as flashing a cooked ROM.
There's a much easier and more "standard" way, at least on the official T-Mobile US 6.5 ROM. With TouchFlo, slide to the Settings screen. Check the lower left - you'll see "All Settings" - click this and you will find a bunch of settings (including Owner Info) like you had in 6.1.
BigBit said:
There's a much easier and more "standard" way, at least on the official T-Mobile US 6.5 ROM. With TouchFlo, slide to the Settings screen. Check the lower left - you'll see "All Settings" - click this and you will find a bunch of settings (including Owner Info) like you had in 6.1.
Click to expand...
Click to collapse
Owner Information does not exist in those settings unless you have made the regedit, please don't try to answer a question when you have no clue what you are talking about, kthxbye
Zylograth said:
Owner Information does not exist in those settings unless you have made the regedit, please don't try to answer a question when you have no clue what you are talking about, kthxbye
Click to expand...
Click to collapse
so do you have the solution?
The answer is in post number 3 of this very thread!
Touch Pro2 Registry Edit
Hey all,
I modified my Touch Pro2 registry so that I could enter Owner information. This was done with the following edit to the registry
HKEY_LOCAL_MACHINE\ControlPanel\Owner\Hide and make the value 0.
Since I performed this edit I am unable to get SMS messages. I can send fine but when I get messages into my phone I get an error message that says "A problem has occurred with device.exe"
Anyone have any idea what might be causing this. I have performed numerous soft resets but to no avail. I also went back into the registry and returned that value to 1. again no help...
Please...Help
Im having the same problem as well. I put all my info into the ME card and i did the registry thing so now Owner info shows up under Setting > personal but the info there is correct. Yet Smartgear says my machine ID is some random number. check out the pics below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the registry change above didn't work for me (cooked rom i guess)
Here's a workaround that might work for someone someday:
Install SKTools > TOOLS > ABOUT > REGISTRATION > OWNER
on this screen it will realize there's no Owner's info entered and open it for you

[ROM][2.11] IceOS v1.3 ~ 28002 [GER][Online!]

Hey everyone, now this is it, this is my first Diamond ROM.
I finally made it and it's running very fine for me
A big thank you goes to _lab, Animelover, Sevo and bogy, who often helped me a lot!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Infos
Build: 28002
OEMDriver: 2.11
Language: German
native Kernel
smaller ULDR partition
some RAM Tweaks
Filestorage: 111MB free
Programstorage: 59MB free
(after Flash)
What's inside?
App-list coming soon
I just try to keep it as clean and functional as possible
Welcome Screen by emse_186 - thank you!
Known Bugs
- ...
Download
v1.3: http://www.sendspace.com/file/s2t9en
v1.2: http://www.sendspace.com/file/4t2264
v1.1: http://www.sendspace.com/file/hfzifs
(please manually softreset after customisation)
v1b: http://www.sendspace.com/file/hvn1u8
v1: http://www.sendspace.com/file/fawzqv
hi ice8lue!
I flashed your rom yesterday, it's my first winmo 6.5.
I didn't found any bugs (exept for the Lockscreen thing...) and i'm very happy with it!
thank you for your work!
p.s. do you also have "problems" with arranging the programms in "start menu"?
it's moving the icons in a strange way, i know, it's not a bug, but i didn't figure out, how it works exactly!
DonClemento said:
hi ice8lue!
I flashed your rom yesterday, it's my first winmo 6.5.
I didn't found any bugs (exept for the Lockscreen thing...) and i'm very happy with it!
thank you for your work!
p.s. do you also have "problems" with arranging the programms in "start menu"?
it's moving the icons in a strange way, i know, it's not a bug, but i didn't figure out, how it works exactly!
Click to expand...
Click to collapse
I'm glad you like it.
Ya that's what I'm working on at the moment...
ice8lue said:
Ya that's what I'm working on at the moment...
Click to expand...
Click to collapse
I think it's arranged in lines (see the picture).
so if you drag a icon at the very first place, the other icons will moved one position to the right side! you know what i mean?
in the picture i've marked the numbers of the icons, so "home" would be at position 1, tomtom at place 5 and so on...
EDIT: hmm, it's not like i descibed it above.. it moves the icons in a strange way.. i still don't figure out, how it works...
DonClemento said:
I think it's arranged in lines (see the picture).
so if you drag a icon at the very first place, the other icons will moved one position to the right side! you know what i mean?
in the picture i've marked the numbers of the icons, so "home" would be at position 1, tomtom at place 5 and so on...
EDIT: hmm, it's not like i descibed it above.. it moves the icons in a strange way.. i still don't figure out, how it works...
Click to expand...
Click to collapse
well ya, it IS like that. It's just that I wanna try to sort them when flashing, not manually afterwards
Hello,
nice rom thx.
it is possible to open the sip menu? I want to use the phone keypad but only the full querty functional.
maximusx said:
Hello,
nice rom thx.
it is possible to open the sip menu? I want to use the phone keypad but only the full querty functional.
Click to expand...
Click to collapse
Sure, go to Settings -> Personal -> Input and choose the Input methode you'd like
can anyone tell me why i cant write sms messages?
Sure, go to Settings -> Personal -> Input and choose the Input methode you'd like
Click to expand...
Click to collapse
I did it before, but there is no input setting folder.
please check at your rom if you have the folder.
otherwise can i change to phonepad keyboard by registry?
Feedback
Hi,
thank you for that rom, keep up your work. Fast, enough free memory and stable (beside the already known tiny problem)
I think I will keep it for a while.
I really like this rom, but as said before, i cant write text messages so I HAVE to switch back to Sun X again
Ludacris said:
I really like this rom, but as said before, i cant write text messages so I HAVE to switch back to Sun X again
Click to expand...
Click to collapse
Why can't you write text messages?
works without any problems for me
I have the same problem, if i pressed send nothing happens..
bingo thats the problem. I can write them without any problem but if I hit answer or send nothing happens...
Ya, same for me.
But somehow it just happens once in a while.
If the last symbol in the sms is a * it doesn't send it.
I'm on it
same for me... i can't write sms-messages...
some for me too... can´t send sms...
send sms bug solution
for me, just the send-button on the bottom don't work. try to send with a longklick on the body of the message and hit send. for me, it works fine and i'm happy with it for the moment. great rom!
DonClemento said:
for me, just the send-button on the bottom don't work. try to send with a longklick on the body of the message and hit send. for me, it works fine and i'm happy with it for the moment. great rom!
Click to expand...
Click to collapse
thx for info
it works on this way
Can´t flash the ROM on DIAM300.

Categories

Resources