Related
Randomly when I update QuickGPS I get an error:
"Data Activation Failed:
Location setting must be on so that the latest satellite data can be used to speed up GPS positioning"
I'm on a T-Mobile USA Touch Pro 2.
If I restart my device, I can update QuickGPS without error. But once I get this error, I always do until I restart my device. Its like the "location setting" just dissapeared. Anyone have a similar issue or know of a fix?
I'm having same problem.
I've try to update the QuickGPS and it tells me I need to set location to on but I can not find it anywhere. It suppose to be at Start, Settings, Phone, Services then I should be able to see locations but I don't see it.
It's missing and I hate to call customer's services and run into someone who reads out of manuals.
Any takers?
TIA.
Anyone have any ideas?
same prob
I see that my location is set to on, but wont update regardless of soft reset. just updated to europe wwe 6.5 from htc site. didnt have prob with 6.1 stock from tmo usa
I have the same problem with the stock rom from sprint. it will say i need to turn on location setting, but when i look, it's already on. also, if i try to turn off location setting, it stays on. when i look again, after selecting off, ok, etc., the location setting says on again. soft reset is the only thing that fixes it.
after soft reset, i quickgps, then run garmin and it works fine. after i turn off garmin and don't use it for awhile, then i can't get a fix and i get the location setting error when trying to run quickgps.
any ideas?
I'm using HTC Topaz with official WM6.5. I've found that this problem happens after installing WM6VoIP.cab (it's necessary for enabling SIP). Btw not only QuickGPS fails with update, GPS completely stops working.
Removing of "Sleuth's WM6VoIP" through "Add\remove programs:" doesn't work - only Hard reset helps.
I had the speed fix instaled but i did a factory reset to to clear up space and just instaled the thing I really use and now i cant unlock the HSUPA feature in advance network any sugestions
hmmm...well id say uninstall the cab. soft reset to make sure its cleared out. then if i remember correct, install the data fix cab again. dont restart right then when it asks. cancel it. then go to start menu. settings. advanced connections. then make sure to select the one that says HSPDA/HSUPA enabled. meaning both are enabled. after u do that, then soft reset it. once your phone boots back up, you should see the big H symbol next to your 3g one or whatever one you have. It worked like a charm for me. no problems. the H stays enabled on mines. Just make sure to do it exactly like that or its not probaly registering right or something or saving the changes. hope this helps you. let us know. i have the data fix, sd card tune up, no push internet, and dynamic proxy cabs installed. along with all bloatware deleted from phone. So my phone is wayyyyyy faster and smoother than b4. also added a ton more free ram available on startup, idle, and normal/heavy use. i also got drivers but going off subject..lol good luck
What is the latest version i've dowloaded jh2001's tilt2 data speed fix 1.0
when I open to install it says it is unsuccesfull
hmm..i just checked..i have the same version as you, the 1.0. you just have to make sure to install it in those steps i listed in previous post. Unless u have some custom rom or something and its not registering right. ok quick version. make sure its uninstalled. we starting over..lol Then install it directly to your device memory if the option comes up to do so. Then itll probaly say that u need to soft reset for changes to take effect. press cancel. you dont want to soft reset yet. then go to start menu, then settings, then advanced. You should see that it changed up from b4. You need to select the one that has both hspda/hsupa. make sure its selected. then go back out to main or home screen and soft reset. once your phone boots back up, you should see the H SYMBOl up top of your phone. you can also go to to your settings again . and go to advanced and make sure that it says hspda/hsupa. dont change anything else in there unless you know what you doing. might change something up. it should work wit no probs though. let me know if that still didnt work. theres nothing wrong with the cab. or just download it again, meaning a new one, and do those steps listed. enjoy your weekend.
Well Ive tried uninstalling previous installation but it doesn't show on the programs list and Ive followed the instructions given above but I still getting error installing the ceab I had it installed before and it worked!!
How do I erase the phone to factory settings other than cleaning storage?
quiquerc said:
Well Ive tried uninstalling previous installation but it doesn't show on the programs list and Ive followed the instructions given above but I still getting error installing the ceab I had it installed before and it worked!!
How do I erase the phone to factory settings other than cleaning storage?
Click to expand...
Click to collapse
Clearing Storage will reset your phone to the factory (default) settings of your current ROM. Is an error message appearing when you try to install or is nothing happening?
I did went and clean the storage but When I try to install the cab it instantly says
"Installation of jh2001 tilt2 data speed kix 1.0 cab was`unsuccessful"
i really don't understand as i mentioned before it was working fine two week ago
Well just did a hard reset an erase the storage but still can't reinstall the speed fix!
Is there any other way or another cab to install?
Anybody reporting the same problem?
ok, you don't need the speed fix for HSPDA/HSUPA support. Download and install Julian Schapps advanced configuration program, you will also need to download and install .net ver 3.5 (get it from microsoft). Install and soft reset. Start adv config, scroll down to data connections and enable HSUPA support, soft reset. Then open settings, advanced network settings and then scroll to enable hspda/hsupa and you are all set. you will be getting around 2.2-2.8 MB/sec download speeds. This works well and you will see the H on your top line of the home screen. You do not need the speed fix, you can install it, but after these first two steps.
quiquerc said:
Well just did a hard reset an erase the storage but still can't reinstall the speed fix!
Is there any other way or another cab to install?
Anybody reporting the same problem?
Click to expand...
Click to collapse
ms0529 said:
ok, you don't need the speed fix for HSPDA/HSUPA support. Download and install Julian Schapps advanced configuration program, you will also need to download and install .net ver 3.5 (get it from microsoft). Install and soft reset. Start adv config, scroll down to data connections and enable HSUPA support, soft reset. Then open settings, advanced network settings and then scroll to enable hspda/hsupa and you are all set. you will be getting around 2.2-2.8 MB/sec download speeds. This works well and you will see the H on your top line of the home screen. You do not need the speed fix, you can install it, but after these first two steps.
Click to expand...
Click to collapse
quiquerc, you can do what ms0529 just suggested, it should get you the HSUPA options and the related speed improvement by following those steps. However, each time you clear your memory like that (aka "hard reset"), you also wipe out some critical elements that have to be added to any new fresh ROM, like .net 3.5...so, you'll have to reinstall that anytime you wipe the phone, before many programs (like this cab) will install or work properly.
So, install .net 3.5 again real quick (see below), and you should be able to install and use the cab after that...however I DO highly recommend the advanced config app anyway, so you should try that out even if you don't use it to help you out with this (in fact, I've even attached the cab here for you as well )
Ive install net 3.5 directly from microsoft and the advance configuration tool
and was able to enable hspda But when I go to the advance network connection it doesn't gives me the option to enable it like the speed fix did.
I'm going to redo all the instructions above maybe I'm missing something.
Ive instaled the config tool and its worling fine now.
Im instaling android let's see what happens!!
hsdpa
I need the help. But there is no such option under "advanced network" on the htc tilt 2(Enable/Disabled hsdpa option).What programs recomended for me
I had tried some newer 2.1 ROM, such as VillainROM 5.5, 6.0.x, 6.1, Cronos Droid 1.x and SenseHero 2.1b3. MMS is only works on VillainROM 5.5 (VR5.5).
I already setup correct and same APN for each rom, also updated telephony.db using sqlite3 or mmszap. Each rom settings are the same, only VR5.5 can received MMS each test, others rom are similar error such as 'Generic network error' or 'download failed'. I had tried to manual switch off data connection and re-download MMS, not work. I had tried to make mms APN to default, only works one or two time. But I setup my data connection is always keep online, so if I received MMS, I can't switch APN, from logcat I see it keep connecting, but failed to connect, so strange.
OK, at last, I found the problem. That's system/lib/libhtc_ril.so . Yes, it's RIL, that controlling phone's radio. I replace libhtc_ril.so from VR5.5 to SenseHero 2.1B3, MMS is working like VR5.5.
If anyone has MMS issue, and make sure you already set correct APN and telephony.db, you can try this.
Attached libhtc_ril.so from VR5.5, flash-able update zip.
Make sure you already BACKUP the old file!!
MMS was atleast working in the last cronos rom 3.4, i just dumped the file from 3.4 oc rom.
It diffrent in size, so there is probaly something changed.
It denpends your Network Operater. Maybe some network is bug with some radio.
I am using 63.18.55.06JU_6.35.09.26
Doesn't work for me - after flashing my phone shows "no service" always, and doesn't even prompt to unlock the SIM card. I'm running same radio as you and Chronos 1.4.1
Have tried everything now and still no mms!
This fix doesn't work on Chronos 1.4.1, it will make your phone NOT RECEIVE any signal at all. (tried myself and ended up doing a full wipe and re-flash Chronos again)
I am using cronos 1.4.1 too. but I am only using GSM, not sure WCDMA
OK, I figured out what was wrong - there wasn't enough free space to copy the new file, which is slightly larger. If you try and push it through adb you get an out of memory error. I used Androidcommander to delete something else, then the copy worked OK and the radio works.
Once that was done I did the telephony.db fix and mms is now working
When installing Arcsoft_MMS_5_2_6_45U, I get an error that says, “Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.” What do I do? This is the only Arcsoft that works with my Boost Mobile picture messaging and with other roms this has worked. Im using Energy.RHODCDMA.23673.Sense2.5.Cookie.GTX.Aug.01.7 z Thanks
Just installed Kings UNleashed Ultra R2. My Voicemail apps not working, when trying to access VM it say Account verification error "Comm with the VM -to-text server has timed out........ it cannot verify account.
The apps VM settings just keep trying to Verify voicemail-to- text account information?????????????? what the hell, menu ,setting ,call, Vm service " my carrier":confused, voicemail settings 'my carrier". I can access VM by long presss 1
Have you tried re-flashing the rom/rebooting yet?
no not reflashing the rom but reboot several times, wpie cache/delvick still no go
Well i would recommend a reflash of the rom, try a clean install, wipe everything. Back it up, apps included. When you restore the apps, do apps and data only, do not restore system settings.
download a fresh copy UNleashed Ultra R2, wipe cache /data/dalvik then flahed still giving me the same error " account verification error T404 comm with the Vm-to text server has failed.
Well it seems like the app is having trouble verifying your user account for some reason...