Related
Hi gentlemen,
I have a QTEK 2020 and have a very annoying problem: Every few days my phone loses its connection to the cellular network. When it happens - nothing is seen; everything looks perfectly normal (even shows GSM reception), however no-one can call me. When this happens, I can't initiate outgoing calls either. Only a soft-reset fixes the problem.
I'm using ROM version 1.72.00WWE and Radio 1.17.00.
I saw in this forum that there's a newer Radio version - 1.17 and I was thinking maybe it will solve the problem I have.
However I'm seeing updates to MDA II and XDA II.
Can anyone advise me what to do? Is there an upgrade to QTEK as well? If not - can perhaps someone "compile" a neutral version (no branding)?
And another question - is it possible to upgrade just the Radio?
Any help would be very much appreciated!
Thanks,
Ariel Cattan
Hi. I've got problem because i don't see who is calling me. Only thing is network name in upper right corner. Some time ago it happens occassionaly, but at now this is very often. I can say - i rarely know who's calling me.
I've been looking for topics with similar poreblem, but only i found says it can be network problem. I've called my network operator and all is set ok. And identification works well on my previous phone, nokia 7650. So this is'nt a network problem. So what it is, and how to get rid of it ? Please help because its very annoying.
My configuration
Radio: 1.12
Rom: 1.40
ExtRom 1.22 (from my operator, not cooked)
regards
mine does that sometimes... it started after i installed something, ionly thing is i installed that much stuff, i cant remember what it was so i cant really uninstall it to fix or to see if it fixes. if there is a way round it, then id like to know how to fix it too, tho it seems to only happen when certain people call, so its not too bad.....
I am using LVSW ROMs since 26/03 version, through 08/04 until present 19/05. I also have 1.41 version of Radio ROM. Since I've started using these ROMs, I'm noticing problems with radio stack.
For example, while I was driving a car across Europe (UK->PL) few weeks ago, GSM module hanged almost every time I was crossing a border between countries and phone was loosing signal from one country and had to register in another. All I could see was little [!] sign instead of signal bars, and restarting phone module and/or whole device could help it. Two days ago I was on M1 from Sheffield to London and I've noticed that GSM module just died - pressing green button did just nothing (despite I had full signal bars), and people trying to call me that time, were saying they had regular calling signal, like I was missing a call. Besides that whole device was working properly, with no problems whatsoever.
On the other hand, I have no problems with dropped calls or data sessions. Looks like it is happening mainly on the move, and phone has problems with registering with network properly.
So there is a question(s) - does anyone have similar problems with LVSW ROMs or 1.41 Radio ROM? Should I downgrade Radio ROM to 1.40 or 1.38? I have HardSPLv7 installed, so is it safe to just use this RUU - ftp://xda:[email protected]/Uploads/Hermes/HERM_Radio_Only_1.40.30.00_CustomRUU.rar ? I've been searching forums, but haven't found much information on *downgrading* Radio ROM in particular.
Thanks in advance for any suggestions.
Its the radio rom causing you problems. I've also had problems with data connections in particular using ROM 1.40 and 1.41 (in Asia, on UMTS and EDGE networks).
Suggest you re-flash the pretty-much proven 1.38 ROM. You can find the download link from the Wiki.
radio downgrade
I used the 1.40 on black 2.5 and it was ok , then I upgraded to 1.41 radio and I had problems with the sound quality so I downgraded to 1.40 and the sound become back good
I have HardSPLv7 installed and I am on orange IL Israel
I used for downgrade CustomRUU and had no problems on the downgrade prosses
now i am using the last version of LVWS with radio 1.40 and it is working ok
hope this info help you
another remark :
try to install first the radion and on top of it os and not first os and then radio , i notice in a change of battery life in those 2 variants
Were you driving too fast for the phone to keep up with the radio transmitters passing by????
I'm also using LVSW 19-05 and Radio 1.41 but not having any significant issues unless a program runs at 100%, then the person trying to call me hangs up before the phone starts ringing!
Ciao Oggy.
It's not the LVSW ROM.....! It's the radio 1.41 And this radio was tuned for Cingular. I am on Cingular and i personally think that 1.40 is much much better. Read up on the two radio topics for more info on the two. So the bottom line is it's NOT LVSW at fault here. it's the 1.41 radio...
DAFTEK said:
It's not the LVSW ROM.....! It's the radio 1.41 And this radio was tuned for Cingular. I am on Cingular and i personally think that 1.40 is much much better. Read up on the two radio topics for more info on the two. So the bottom line is it's NOT LVSW at fault here. it's the 1.41 radio...
Click to expand...
Click to collapse
Yeah, that's what I thought, but wasn't 100% sure either. I'm going to downgrade to 1.40 tonight and will observe any results...
Thanks to all for your inputs.
to be fair I think there is a problem with t-mobile uk at the moment with handovers, let me explain.......
I have a active data connection.........
phone is on 3G, everything fine
phone switches to 2G, data connection is still active, no problems
phone switches to 3G, data connection is broken and the radio reboots (scrolling dots ect.)
I can (and have) replicated this with EVERY radio from 1.27 to 1.41 (and I do mean EVERY radio)
I've also tried EVERY WM6 rom out there all do the same.
so I can only think its T-mobile playing up, its just strange that everything worked fine with WM5 as I remember (and no Im not flashing back to find out!)
Hi, I'm in the Netherlands. Just tested the 1.40 because 1.41 disconnected all the time. So far so good (5 calls later..). Downgrade went fine with the customRUU. Regards Bas
ratcom said:
to be fair I think there is a problem with t-mobile uk at the moment with handovers, let me explain.......
I have a active data connection.........
phone is on 3G, everything fine
phone switches to 2G, data connection is still active, no problems
phone switches to 3G, data connection is broken and the radio reboots (scrolling dots ect.)
Click to expand...
Click to collapse
Interesting - it might be worth to check, but here in London it's actually hard to find a place where phone would switch itself 3G->2G. But anyway, I had problems not only on T-Mobile UK network, as I stated in first post, so I rather think it's Radio ROM related problem, more than network.
Sorry...I've been to positive. Right now only incoming calls come through. Outgoing is still a disaster. I'll downgrade to 1.38. Ill let you know if this works..
Currently in Thailand on DTAC, an EDGE network (all their GSM networks here have EDGE).
Radio 1.40: Voice calls were okay, didn't seem to have any problems, until I tried using data (gprs/edge). The data connection was completely unstable and unusable. Downgraded to radio 1.38...
Radio 1.38: Everything okay so far, EDGE data and voice calls.
Same boat!
Yup, same thing here with T-Mobile and the 3G/2G thingy.
Though I must admit 1.40 is pretty sucky anyway, 1.41 was worse.
Considering going back to 1.38, I've forgotten what it came with 1.2x or something, which, for its sins was pretty OK.
Oi! T-Mobile!! Sort it out before I head back to Orange!!!!
Actually, forget that rant, no point taking two steps backwards and starting to pay per MB again!!! LMAO
mccreath said:
Yup, same thing here with T-Mobile and the 3G/2G thingy.
Though I must admit 1.40 is pretty sucky anyway, 1.41 was worse.
Considering going back to 1.38, I've forgotten what it came with 1.2x or something, which, for its sins was pretty OK.
Click to expand...
Click to collapse
One more thing, which just came to my mind - in the original T-Mobile's MDA Vario II Extended ROM there is a file called P_rilgsm_patch.CAB, which could be related to Radio. Maybe this is a key for these problems? I guess this patch is network-specific - well, I believe this patch is there for a reason...
Btw, I've just downgraded to 1.40...
Error message flashing Radio 1.40.30
Hope someone can help me with this. I'm encountering an error message when trying to flash to radio 1.40.30. I have Custel 2.5 installed on a JasJam with Radio 1.41 currently.
When I run the update RUU program and click the AutoDetect button, I get a message that says "Error, Unknown version! You should pick SSPL".
I have HardSPL7 installed, so my question is, is it safe to force SSPL? Is that what it is asking me to do?
Thanks.
Nevermind, I think I found the answer finally - it only took many days:
1. Select "2.10 new..."
2. Tick "Is it HARD Spl?"
And then run the update as per normal.
where is the link to downgrade the radio 1.38
thanks
naxos said:
where is the link to downgrade the radio 1.38
thanks
Click to expand...
Click to collapse
You will find all the Radio roms available at this link:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
thanks man
tried P_rilgsm_patch.CAB which as made abit of a mess Could some post rilgsm.dll from a LVSW rom plz as I managed to backup the wrong file
ratcom said:
tried P_rilgsm_patch.CAB which as made abit of a mess Could some post rilgsm.dll from a LVSW rom plz as I managed to backup the wrong file
Click to expand...
Click to collapse
OK, but how to actually copy/send rilgsm.dll file?? Each time I have 'File cannot be copied' message, or such like... :-o
Btw, what happened, when you applied rilgsm patch?
i now get a "E" icon instead of "3G" and the radio seems slower handing over from 3G to 2G and back (thank god my stairs are 2G only!) I've sent you a PM on how to copy that file.
I'm having problems with connections using Web'n'Walk and want to try changing the radio in my XDA Exec to a T-Mobile issue in the hope that it will improve performance.
Despite much searching I can only find these radios as part of self-extracting ROM updates which won't work on my Exec due to country error.
Can any anyone point me to these radio ROM images or suggest a radio version that works really well with Web'n'Walk.
Cheers
I am using radio 1.15 with no problems with T-Mobile WnW...I am also in the same sort of area..
here is the Radio v1.10 for you:
http://www.megaupload.com/de/?d=3NIAM5HD
Many thanks. I'll give them both a try.
found here:
http://218.93.115.138/d900
There is something odd about UK T-Mobile and Radios other than 1.10. I have upgraded to various WM6 ROMs and, indeed, the latest WM5 ones. Initially, they work well but, after about 24 hrs, the phone keeps losing a signal, GPRS stops working and send/receive hangs. Soft resets work initially, then even that doesn't fix it. My only solution is to revert to the standard T-Mobile Universal WM5 ROM. The common element is Radio 1.50.
I have read posts saying that others have had no problems with 1.50 but, for me, in the Oxford area, only 1.10 works.
Thanks for sourcing it, I can now try wm6 with Radio 1.10.
Have found and uploaded to my folder 15 different radios.
Hopfully it makes it easyer for others to find things they want...
The goal of this thread is to find out which radio is best for your region and provider.
We will have to look at the following
-Reception strenght for both gsm and 3g.
-Speed of GPS lock
-Batterylife
I have added a poll, the poll will be continent based, but you can post your exact country and provider in your commentry post.
if we can get enough information or see a red line that makes things easyer we could add a wiki page with recomended radios for each country or provider
yeayyy second...
from qatar .. no probs with radio 150xxxx
signals ..atleat get a bar where 1.46 didnt get any
gps.. maybe bit faster lock..
improved.. now dont need to charger 2 days ( depends on usage)
In New Zealand (on Vodafone NZ), and strangely with the Dopod ANZ WM6 ROM and 1.46.30.11 radio incoming calls don't work, I can dial out just fine and all other radio functions (BT, WIFI, GPS) work perfectly. Just nobody can call me - they get a disconnected signal which is very strange! Tried fixing the phone to only GSM or only 3G, neither of which helped.
I would have thought that since the Dopod ANZ ROM was released for the ANZ region the 1.46.30.11 radio that came with it would work nere.
Went back to the 1.38 radio ROM which fixed the problem. Haven't yet tried 1.41 or 1.50 to see if they fix the problem.
In North America using 1.46.00. It works as well as 1.38 did, however GPS fix is twice as fast now.
Rogers Canada
-------------------
1.50.08.111
1.46.xxxx
Sometimes calls are dropped after 1 ring and sent straight to voicemail. Sometimes phone doesn't even ring and goes straight to voicemail. GPS reception is great. Haven't noticed any difference in call quality with either of these radios.
1.38.00.11
Seems to be most stable for me. Doesn't not have the same issues as the newer radios, however GPS reception isn't as good.
T-Mobile USA.These ones work fine.
1.35.00.11
1.38.00.11
1.41.00.11
1.46.00.11
1.46.30.11
This version:1.50.08.11
Sends my calls straight to voicemail and sometimes the phone only rings once.
Up till now it would seem that 1.50.08.111 is the best version to choose by default, and only if you have problem then you should downgrade to 1.46.xxxx
ACCORDING TO MY OPINION:
each official os require different drivers and/or dll to access to radio rom and one of the most important is rilgsm.dll and related exes.
More or less, we actually have 3 kinds of cooked rom, derived from official anz, sea and new anz with different radio roms. Each one should use the radio rom shipped with its own os, but as to seem that all the people here go always to the latest revision number without thinking to the drivers they are using.
The latest radio 1.50 has been shipped by a local provider probably with special setting, but the people seem to go to this version just becouse it's the latest revision. Why don't you trust what your rom cookers are suggesting about radio roms?
For example, it seem that the most part of the people are using axel roms on its devices, and axel includes Radio v1.46.00.11 to its own rom. But according to this poll, most part of the people are using 1.50 radio.
Please think about this...
Ciao
Antzzz said:
In New Zealand (on Vodafone NZ), and strangely with the Dopod ANZ WM6 ROM and 1.46.30.11 radio incoming calls don't work, I can dial out just fine and all other radio functions (BT, WIFI, GPS) work perfectly. Just nobody can call me - they get a disconnected signal which is very strange! Tried fixing the phone to only GSM or only 3G, neither of which helped.
I would have thought that since the Dopod ANZ ROM was released for the ANZ region the 1.46.30.11 radio that came with it would work nere.
Went back to the 1.38 radio ROM which fixed the problem. Haven't yet tried 1.41 or 1.50 to see if they fix the problem.
Click to expand...
Click to collapse
Yeah, I have the same problem with my P3600. I have upgraded to radio rom 1.46 and people can not call me anymore. I am downgrading to 1.38 now. I have put wm5 back but the radio rom didn't change. it is still 1.46.
and?
And South America? it doesnt exist?
There can only be 10 options, so south america and everything else not mentioned goes under the other option
Tried 1.38.00.11 .. that comes with mun rom...
it was working perfectly ...
then unfortunately i upgraded to 1.46.30.11 ...
which sucks big time ... voice is bad ... reception is bad .. and gps is the same ...
didn't try other roms ...
on my way to reinstall 1.38
I for one never noticed any difference they all perform the same way, its only a version number that changes in my device
What about Portugal?
Im still using the olg 1.46 one...
taiseer999 said:
I for one never noticed any difference they all perform the same way, its only a version number that changes in my device
Click to expand...
Click to collapse
If thats the case why are you still using Radio-Rom: 1.46.30.11 ? could you explain?
vdias said:
What about Portugal?
Im still using the olg 1.46 one...
Click to expand...
Click to collapse
Last time i checked portugal was part of europe
tetsuo55 said:
If thats the case why are you still using Radio-Rom: 1.46.30.11 ? could you explain?
Click to expand...
Click to collapse
Yeah simply becuase I am tired of moving between different versions just trying to improve the GPS first fix as people claim the fix is faster with every new radio rom, and I got sick of it and that was the last version I used....
I would have had the same question coming to me with any number I had put in my signature....ha
thanks for that answer
Can we pin this and other Polls?
I am using "Test.build.gps.32.75.7020" Its was made for specific network provider. With standard radio rom my phone was missing calls and sms messages.
Hello guys!
I flashed 1.5xxx radio to my Trini, and my IMEI has changed!!!Do you have any idea, how to change it back? My IMEI is checked every time, I leave the factory, I can not leave it like this