Hello, I have with me a TP2 with S/N : HT95VLL00XXX. Can anybody tell me what version is this TP2 ? It has Chinese language, but if I use OEM ROM from HK to flash, it said invalid vendor ID. Kindly direct me on what version of ROM to use please. Thanks ppl...
On settings, device information, check the rom version. There are a few Chinese roms out there, and you have a CID issue. Or wait for Hard_SPL.
Cheers
Hi, thx for replying. But I need the OEM ROM to flash it again. Because after that I can create Goldcard. AFAIK, in order to get Card ID and create goldcard, the card must be inserted to the device which wanted to be flashed right ? If it is right, then it means I cannnot create any Card ID since my device is stuck in Bootloader mode all the time. Mtty's Set 16 0 doesn't fix it. It exits the BL mode but stays in the touch Pro writings...Never move further...Thx....
Is this what you are looking for?
http://forum.xda-developers.com/showthread.php?t=492930
ark666 said:
On settings, device information, check the rom version. There are a few Chinese roms out there, and you have a CID issue. Or wait for Hard_SPL.
Cheers
Click to expand...
Click to collapse
in addition, you need to know if it supports Traditional Chinese (CHT) or Simplified Chinese (SC). CHT is used by Taiwan and Hong Kong.
Hi guys, thx for replying..But case closed..Thx to cmonex the hero
Related
i hope anyone can help me.
i want to unlock my mda c III here http://www.imei-check.co.uk/ ,so my question is, is this forever or a problem when i make a rom update to wm6 ?
and i read that this unlock remove also the cid, so i can flash any fimware what i found for htc p3300 ?
many thanks for help
smithi said:
i hope anyone can help me.
i want to unlock my mda c III here http://www.imei-check.co.uk/ ,so my question is, is this forever or a problem when i make a rom update to wm6 ?
and i read that this unlock remove also the cid, so i can flash any fimware what i found for htc p3300 ?
many thanks for help
Click to expand...
Click to collapse
If you only need to flash another then you don't need to unlock your device!
you can run uspl and flash any rom, but if you wanna use another provider then its best to check imei-check.co for sim unlock. read the stickies for more information.
no i want unlock my phone and i want test any roms, so is there an problem that the phone lock after flashing ?
thanks
smithi said:
no i want unlock my phone and i want test any roms, so is there an problem that the phone lock after flashing ?
thanks
Click to expand...
Click to collapse
No, remain free!
Hi this is the original hero rom for asian HTC Heroes.
http://rapidshare.com/files/2816580...EA_WWE_2.73.728.5_release_signed_NoDriver.exe
wow thank you! ill look into this!
technician-2s said:
Hi this is the original hero rom for asian HTC Heroes.
http://rapidshare.com/files/2816580...EA_WWE_2.73.728.5_release_signed_NoDriver.exe
Click to expand...
Click to collapse
thanx dude!
Which part of Asian? What input languages does it come with?
I'm a Malaysian too
The only bad thing about this update and the ROM is the absence of Market :-( I don't like SAM.
Geochelone said:
I'm a Malaysian too
The only bad thing about this update and the ROM is the absence of Market :-( I don't like SAM.
Click to expand...
Click to collapse
u should download market enabler...
just google it... and follow the instruction, all should go well...
thx, added this one to the main thread:
http://forum.xda-developers.com/showthread.php?t=559622
thanks jesterz will be updating all the new official roms when i get them. its a weird thing though when malaysians doesnt have GMS on their device but singapore does. so weird. and its South East Asian ROM. it comes with chinese input and font as well. most likely you would root the phone i guess. lovin it. any other chinese reader who needs an application that installs application from your pc if u need it just PM me i will post it here.
Is there any zip Rom which can using recovery to flash it?
Ruu will over write hboot and causing trouble.
Thx
sorry, i want to know that, the rom is traditional or simplied chinese? and i rru the 2.73 rom already, can i rru it again?
thx
I've upgraded the radio, it won't let me install this ROM... (after bootloader screen and dump the ROM to the phone)
is there a necessary SPL to upgrade?
mystaka said:
I've upgraded the radio, it won't let me install this ROM... (after bootloader screen and dump the ROM to the phone)
is there a necessary SPL to upgrade?
Click to expand...
Click to collapse
Hi mystaka,
I am not sure about your problem as the device is still new here in SEA and i only have SEA units to test about. So far SEA device have given me no problems to installing this ROM. Maybe try another region ROM?
technician-2s said:
Hi mystaka,
I am not sure about your problem as the device is still new here in SEA and i only have SEA units to test about. So far SEA device have given me no problems to installing this ROM. Maybe try another region ROM?
Click to expand...
Click to collapse
Hi! May i know what is different in this rom compared to 2.73.707.9?
Thanks
technician-2s said:
Hi mystaka,
I am not sure about your problem as the device is still new here in SEA and i only have SEA units to test about. So far SEA device have given me no problems to installing this ROM. Maybe try another region ROM?
Click to expand...
Click to collapse
My machine had default Germany/Austria/Switzerland/Italy build, but I've upgraded the radio and the ROM to Drizzy Drake's one... Will it let me downgrade?
mystaka said:
I've upgraded the radio, it won't let me install this ROM... (after bootloader screen and dump the ROM to the phone)
is there a necessary SPL to upgrade?
Click to expand...
Click to collapse
I have the exact same problem , i am running 2.73.707.9 at the moment, I can't install any official rom.
my hero from UK
can I install Asian ROM on it?
and what the different between UK ROM and Asia ROM?
Yea same here.Im from Singapore but yet the error says "customer ID error"... this is the SEA version what...
I know i'm digging into a pretty old thread. But just wanted to know if this SEA version works for the Indian version of Hero as well. I have a Hero branded by Airtel and I've been dying to get rid of the Airtel logo as that eats up all my boot time.
Hello,
I bought a new fantastic TouchPro2 Orange-branded.
I would like to install the lastest official no-brand ITALIAN ROM WM6.1 from the HTC website.
But I cannot download it because my serial number is associated to the Orange phones.
Can you help me to find this ROM or give me a valid serial number (so that I can use it again as soon as HTC will release the official WM6.5 ROM)?
Thank you in advance to all.
P.S. If someone is interested to my unlocked Orange-branded ROM 1.19.61.3 (51489) WWE no problem for me to share it !
http://rapidshare.com/files/2639044...08.1_Radio_Rhodium_3.44.25.27_Signed_Ship.exe
but don't forget to HARD SPL your device first!!!!
Xtreme XL said:
http://rapidshare.com/files/2639044...08.1_Radio_Rhodium_3.44.25.27_Signed_Ship.exe
but don't forget to HARD SPL your device first!!!!
Click to expand...
Click to collapse
You're my star!
I'm looking forward to receive some legal smoke from NDL
Already flashed successfully
Xtreme XL said:
http://rapidshare.com/files/2639044...08.1_Radio_Rhodium_3.44.25.27_Signed_Ship.exe
but don't forget to HARD SPL your device first!!!!
Click to expand...
Click to collapse
Sorry for ignorance: if is the official HTC Rom, why do I need to installa HARD SPL?
your phone is set to only allow Orange ROMs - I think it's the CID
if you install HardSpl it allows you to flash ROMs not intended for your device and they also don't need to be signed
if you SIM-unlock your device using this forum you'll have the option to change the CID of your device - this will allow you to use any signed ROM even without HardSpl
but as I'm new to all this please wait till someone more experienced verifies this post
I think the previous Orange ROM was better than the official HTC ROM, anyway it was in english so this one is OK for me.
I'm looking forward to the official release of the WM6.5 HTC ROM !
how can i tell if my device is sim unlocked?
i know that my previous phone was sim unlocked.
sv452 said:
how can i tell if my device is sim unlocked?
i know that my previous phone was sim unlocked.
Click to expand...
Click to collapse
by putting in a sim card from another network?
sv452 said:
how can i tell if my device is sim unlocked?
i know that my previous phone was sim unlocked.
Click to expand...
Click to collapse
sim/network locking is illegal in south africa. has been for a while now
unbranding HTC fuze and load new SA rom
I have a HTC Fuze At&T phone which I sim unlocked to use on Vodacom/MTN network. The phone software is really crappy and I was hoping that I can get a rom update on this site so that I can flash the SA version and hopefully get the GPS and browser to function.
I successfully did that for my Experia but cant find simular info for the HTC fuze or Touch pro as it is called in SA.
Any help will be great.
thanks
Welcome to forums
have a look here:
http://forum.xda-developers.com/showthread.php?t=550540
Good luck,
So I received my Arc S today in the UK, and it's a French model - I knew it'd be a European model of some sort when I ordered, so that's fine.
But even though I've set the language to English, I'm still finding a few things in French and it seems like my UK network can't detect what phone I have, and I'm unable to get a data connection.
Can someone tell me if it's possible to flash a generic stock or O2-UK stock rom to it please? I used to have a HTC Sensation and have experience rooting and custom rom'ing with that. My current build number is 4.0.2.A.0.42.
Do I root and flash the stock firmware from this page?
http://forum.xda-developers.com/showthread.php?t=1204302
So to build number 4.0.A.2.368, to be clear. Will that give me all the generic/UK stock options instead of French video services, Canal+ and Jeux Gameloft?! I really don't need a custom rom, in fact I want it to be as much like I've just bought it from a UK supply as possible and don't even need rooting or the bootloader unlocked at the end of it if that can be avoided.
Your help is much appreciated in advance!
schnide
Go to http://www.wotanserver.com/en
You can flash what you want for free, just register on the site and download the client
http://www.wotanserver.com/en/sony-ericsson/se/xperia-arc-s-lt18/4-0-2-a-0-62/language-download
plopingo said:
Go to http://www.wotanserver.com/en
You can flash what you want for free, just register on the site and download the client
http://www.wotanserver.com/en/sony-ericsson/se/xperia-arc-s-lt18/4-0-2-a-0-62/language-download
Click to expand...
Click to collapse
Thanks! It doesn't seem to have a generic UK firmware - only Central Europe 1/2/3 without listing the difference - but I've emailed Wotanserver to see if they can advise.
Is their method safe, do you know?
Honor 9X: "Error: /preas/ xxx not found in/hw_product/hw_oem/STK-L21HN/parent_cust.c
Hello guys!
A few days ago , tried to upgrade the software of my device, manually via microsd card, using the dload method.
I got a softbrick.
I tried many roms for Honor 9X STK-LX1 (C431) but none worked.
After many attempts, i installed the latest official firmware Emui 10 with Android 10 ( STK-L21HN -10.0.0212), and the device is functional now, but with many bugs.
1) The logo screen has change from previus "HONOR 9X" to "HUAWEI".
2) The new rom is installed without a keybord. So It's difficult for me to setup the new rom.
3) In ----> Settings---->telephone information---->the model seems as "unknown " and
4) In----> Settings----->telephone information---->publication number----> "Error: /preas/ xxx not found in/hw_product/hw_oem/STK-L21HN/parent_cust.cfg"
Do you know what these errors mean and how to fix???
Thank you!
Solved
https://forum.xda-developers.com/an...fficult-to-t4177819/post83729825#post83729825
With the help of @oslo83, we managed to make the device functional.
Now it works like a charm.
It was not easy at all and oslo83 tried
very much.
I want to thank him for his interest and help.
Hi.
I have exactly the same problem...
I would upgrade my Honor 9x (STK-L21HN 9.1.0.334) to emui 10 (10.0.0.212).
@oslo83: Can you explain to me what I have to do for that or may you help me to do?
Thanks in advance.
bennyvon88 said:
Hi.
I have exactly the same problem...
I would upgrade my Honor 9x (STK-L21HN 9.1.0.334) to emui 10 (10.0.0.212).
@oslo83: Can you explain to me what I have to do for that or may you help me to do?
Thanks in advance.
Click to expand...
Click to collapse
Sure, PM me on telegram.me/oslo83
It's about upgrading to a correct LGRPx base for your device, while upgrading correct emui10 cust and preload.
help me with my honor 20 china
Hello can you help me to my Honor 20? its also display in my build number "Error: /preas/xxx not found in /product/hw_oem/L61/parent_cust.cfg" i willing to pay to solve this
I have the same errors with an Huawei P20 Lite (ANE-LX2) region spceas changed to eu via DC-Unlocker
Now is on this firmware:
HUAWEI ANE-LX2 9.1.0.209(C636) YAZILIM ilsasupport.com
- Installed without a keyboard. Solved downloading microsoft swiftkey from appgallery.
- Model is ANE, not ANE-LX2
- Build is: "Error: /preas/ xxx not found in/product/hw_oem/LX1/parent_cust.cfg"
This is not a big problem for me now, because all works ok, is rooted, I can use, call and play well with it. But I'm curious about what is the problem and how to solve it.
Install an other firmware, one which is right for your device's variant hardware.
Job ID: 0000000001978059
2022-04-07 07:46:25
Job ID: 0000000001978059
2022-04-07 07:46:25
oslo83 said:
Sure, PM me on telegram.me/oslo83
It's about upgrading to a correct LGRPx base for your device, while upgrading correct emui10 cust and preload.
Click to expand...
Click to collapse
bruh i have honor 9x pro global version and i downgraded my software to emui 9.1.1.131 but i'm getting chinese keyboard and everthing is crashing there is no browser and all could you pls help me to download the correct firmware for my device i did by dload method but now if i try to update emui it shows incompatible for this version and sometimes software install failed can u pls help if u help me i would be very grateful so pls..
So, after investigations on device, a chinese base was flashed by offline dload on this branded overseas device.
Here why the problems. Force flashing a correct base for actual branded model and region would fix.
oslo83 said:
So, after investigations on device, a chinese base was flashed by offline dload on this branded overseas device.
Here why the problems. Force flashing a correct base for actual branded model and region would fix.
Click to expand...
Click to collapse
Can u tell how to fix it please
oslo83 said:
So, after investigations on device, a chinese base was flashed by offline dload on this branded overseas device.
Here why the problems. Force flashing a correct base for actual branded model and region would fix.
Click to expand...
Click to collapse
Hey i tried that but when i click on update it show it's already on latest version...after v2 and hiproxy ?