two little questiones - Touch Pro2, Tilt 2 Windows Mobile General

Hey there,
when turning touch flo off, locking the phone is like a game for babies, but how do I lock the phone with touchflo? And what is the difference between locking and pressing the powerbutton shortly and turning the screen off?
Bye,
Christopher

Chris, you are going to get flamed a lot with RTFM comments and people telling you to use search when you ask these types of questions with a new thread.
Most people set the long-press end key to lock the device. Others use various apps to do so.
If you lock the phone, you can't interact with the device unless you unlock it. If you put the phone on standby (by pressing and releasing the power button), you may still interact with the device once it's brought out of standby (via incoming call, pressing the power button, etc).
So with that said, going forward, please do read your user manual, the various wiki's, and use search before starting a new thread.

Related

[Q] Atom Life wake up with other buttons

I used to have an XDAII (the very first) where the unit could be woken up by pressing any button. There was a setting in the control panel that allowed you to set it to only recongnize the power button or have the other buttons wake it up. Naturally I set it to the power button, but after a while, that button got worn down and stopped "working" so I naturally set it to recognize any other button.
This experience has taught me the hard way, that its a good choice to have (or maybe even a necessity in some cases) that other buttons to wake the unit up in case of situations like this.
I've just bought an Atom life and unfortunately it ONLY recognizes the power button to wake the unit up. Is there any hack or software out there that could enable the other buttons (or better yet, allow selection of which buttons can turn the unit on)?
I'd like to use the large middle button on the front if possible, since that button seems more "sturdy" than the power button. I may be able to save that poor power button from years of wear and tear.
just realized i posted in the wrong section. Moderators, feel free to move it to the parent Atom section, and my sincerest apologies
Hi, nargalzius
I have been search for decade, but i still cannot find the way to assign other button for waking up da device......
same problem here...
anybody out there figured this one out already?
bump
did anybody find a hack for this?
I have just the opposite problem. I use the headphones that come
with the Atom Life - the button on it not only turns on the device.. if
you bang the mouth piece on something (without hitting
the button), it turns it on too!! I'd love a solution to that
I use O2 Flame and got the same setting, no other hard key than the power button can wake up the device from sleep. Anyone knows the tricks or registry hacks, please share. Thank you very much.
Atom Life Wakeup Button
Hi guys, there doesn't seem to be an answer on here and I assume the reason is as follows - Atom Life also wakes up by pressing the "end" key... (I think this is a general hardware setup)
I was also a bit weary of the power button being worn out, so I did some experimentation and found that the end button works a treat if you have the same concern "end - s2u"... swweeet!
Hope this helps.
vishaal said:
Hi guys, there doesn't seem to be an answer on here and I assume the reason is as follows - Atom Life also wakes up by pressing the "end" key... (I think this is a general hardware setup)
I was also a bit weary of the power button being worn out, so I did some experimentation and found that the end button works a treat if you have the same concern "end - s2u"... swweeet!
Hope this helps.
Click to expand...
Click to collapse
You mean when the phone is in standby mode and you press the END key, the phone will come out of standby? Beats the whole purpose of standby then
I do echo the same "problem" of not being able to change the mapping of the power button to the front button.. ( as I was able to do with my XDA II)
I 'm confused about the "end" key solution..
Anyone finding a solution ?
Thank you all
Nearest program might be MORT saver? it allows you to specify the button that put the device in to MORT stand by and therefore the same button that will awake the device. Not exactly the power button option that you talk of wanting but at least MORT also stops the device from waking up when any of the buttons around the action button are pressed.

Auto Keylock and Quick silent/Vibrate button

Have had this phone for 2 days now, pretty amazing but a few things I can't figure out.
1) Is there a simple way to set an automatic time for the phone to keylock? Say after 10 seconds of inactivity or something instead of having to hold down the end button everytime - Keep forgetting -. Already a few accidental calls due to this. Tried lock me lite, doesnt seem to work properly and I like the builtin lock function, just need to get it to do it by itself.
2) Is there a way to set a key where i can long press to switch from vibrate(and silent) to "normal" and vice versa? I'm already using the long end for locking the device.
Thanks, this has been bugging me since I got the phone.
After seeing this message, and not finding the answer, I wrote my own utility to do this: http://forum.xda-developers.com/showthread.php?t=580050
You can configure long end to popup a menu, which includes lock, flight safe, vibrate, etc...
I'm posting a Vibra (switch) cab that will switch from vibrate to ring. I have it assigned to long send to switch back and fourth. Otherwise I just use the volume keys pretty successfully (I had this cab from my old phone that didn't have volume keys, so I wanted a button to switch it easily).
Jason

Fast click on power on

Hello,
I saw that the phone is switched off when I press the power button very quickly after a few seconds turns on. This for me is very annoying, if I have the phone in my pocket sometimes turns on probably because Touch inside the power button. It is possible to change to having to press for a few seconds and not for 1/10 second ?
it is not possible ?
alfredolo said:
it is not possible ?
Click to expand...
Click to collapse
Why is this a problem? The screen will auto switch off again in 15 seconds if still locked.
Becouse i want turn off the phone.
You want it totally switched off? Hold down the power button and a menu pops up on the screen, switch if off from there.
There is no way to stop the power button waking up the device when it is "standby", that's its purpose, I can't imagine anything more annoying than having to hold down the button just to check my phone
I don't see how you guys don't understand his question.
He says that it is annoying that when you turn the phone off (for X reason) and put it in your pocket, the fact that it only takes a slight touch of the power button to turn the phone on means it involuntarily turns itself on in his pocket. He wantsto know whether it is possible to make it so you have to press a long time on the power button in order to turn the power on, so that if the power buton is only pressed for a second, nothing happens.
I really wish people tried to actually read questions on forums.
This is an important question for all that travel by air.
to avoid that during the take off or the landing the desire turn on inadvertently
My problem was born in the cinema when I turned off the phone and put it in my pocket. After a few seconds I heard the sound of ignition, so I switched off again, then yet again ... up when I removed the sound, while other people looked at me in a mole ..
It would be nice if you could choose to press the button for 2-3 seconds before it turn on, to prevent accidental starting
Totally agree. I had the same issue on the plane the other day. I had powered it off but during take off it powered itself on in my pocket. I used to have an iPhone and it at least required you to hold the power button down for a few seconds before it turned on.
-------------------------------------
Sent via the XDA Tapatalk App
speedking34 said:
I really wish people tried to actually read questions on forums.
Click to expand...
Click to collapse
I really wish people took the time to actually read the reply and accept that sometimes when the OP is in broken english it is misses details, before jumping in to criticise others while contributing nothing of value to the thread.
If you reckoned it was easy to understand the question, why have you offered no actual answer or constructive advice?
If you assume that the question is... can I set the phone so that it requires a long-press of the power button to switch it on when it is completely powered off... the answer is... No, you can't. Perhaps there is scope for this in a modded firmware if you root the device. I suggest you email HTC support to suggest this an an enhancement in a future update to the phone.
Why don't you try this FlexiSheild Case Cover, I purchased one and it has a very robust construction flexible but not sloppy like the silicone ones.
I have found that to turn the phone on or from standby you have firmly press the on button you cannot turn it on by simply sweeping your finger over the button it also offers a lot of protection to the phone and has some rubbery coating on the back to stop the phone slipping out of your hand.
I believe this will elimenate your false switch on of the phone
http://www.mobilefun.co.uk/flexishield-skin-for-the-htc-desire-black-p24206.htm

[Q] Long press power turns on the phone?

I turn my phone off a lot when I travel to save power. I've noticed that only doing a quick press turns the phone off from a cold state which is very annoying when i'm just trying to make sure my phone is off like I did in the WM days and currently do with my android device. I'm wondering if this is restricted to my device (HTC 7 Pro) or it affects all WP7 phones.
Does this annoy anyone else? I've written to HTC so if it annoys you too please complain so we can get this changed!
My Focus requires a long press (2+ seconds) to turn the phone on. It sounds like your problem may be HTC-specific, or something is wrong with your particular phone.
Thanks for the head's up, my complaint has been forwarded to the dev department of HTC so hopefully they fix it soon.
my arrive turns in with a short press I think, as well as my tp2 and other HTC phones I've had. doesnt really seem like a big issue to be concerned over. the accidental turn off issue was resolved in the mango beta and powering off really isn't necessary just a switch to airplane mode or enabling battery saver.
Unless I misread the OP, his concern isn't with accidentally turning off the phone, but accidentally turning it on, since it seems that accidentally bumping the power button on an HTC phone will turn it on.
RoboDad said:
Unless I misread the OP, his concern isn't with accidentally turning off the phone, but accidentally turning it on, since it seems that accidentally bumping the power button on an HTC phone will turn it on.
Click to expand...
Click to collapse
and I've told him that it's not necessary to do that in wp7. I don't get people, first they were complaining about the power button being too hard to press now it's the other way around.
l find that if you wanna check your phone..rather than pressing the power button press the camera button. If its on it'll go to the camera app. If its off it'll stay off.
I have never complained about the power button being too hard, I just checked and my TP2 does this too which is annoying. It's really not a difficult thing to implement and I should be able to conserve as much battery as possible without having to resort to flight mode only.
For now I'll use the camera button idea (thanks!) however ironically enough I have to long press the camera button to see if it wakes up, go figure...
Q&A is that way.... ---->
Sent From My Fingers To Your Face.....

Active button doesn't work when screen has been locked for a while.

I just got this phone and the active button was one of the main reasons I got it. However it's not working as I thought, so I'm not sure if there is something wrong with my phone.
The active button works fine when the screen is on, or when it is off (after pressing the power button) but it hasn't been off for too long.
However if I wait for about 5 minutes, and then I press the Active button, it doesn't turn on the screen or ask me for a password/fingerprint/pattern.
If I keep pressing it on and off, for a while, eventually the screen will come up.
Is anybody having this issue or there's something wrong with my phone?
Thanks.
Could anybody please try the following?
1. Be sure that when you click the Active button it brings up an app.
2. Go to "Lock screen and security" and click on "Screen lock type". Select a finger print and a secondary locking mode (Pattern, PIN or password)
3. Go to "Secure lock settings" and click on "Secured lock time". Select the first option "Instantly with the power key or..."
4. Press the Home button and then the Power key to turn it off.
5. Wait between 10-15 minutes.
6. Press the Active button. If nothing happens, then you have the same problem than me and I will be relieved there's nothing wrong with my phone.
Thanks a lot for trying.
Double-posting is really frowned upon here at XDA, and I provided a potential answer (or maybe not) in the "Ask me anything" thread since I didn't see this one prior to making the post in that thread.
br0adband said:
Double-posting is really frowned upon here at XDA, and I provided a potential answer (or maybe not) in the "Ask me anything" thread since I didn't see this one prior to making the post in that thread.
Click to expand...
Click to collapse
I'm sorry. It's just this whole forum seems kind of dead, except that thread where people seem to help. Since I didn't get any answers in 2 days, I thought about posting it there.

Categories

Resources