Hi,
after installing some dialer tools like inesoft phone i lost my HTC Skin and Called ID.
Tried several times to fix that with Advanced config 3.3 to enable skinned dialer at the phone settings without any success.
Is there an reg key avaliable to enable the HTC Caller ID and Dialer SKIN?
thank you for support, i want to avoid a hardreset after pimping so much .-)
*snief* help .-)
Related
Hi,
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.
romka said:
Hi,
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.
Click to expand...
Click to collapse
I've been asking the same question without any fixes. Not sure how to do it. There was a utility called "Smartskey" used in WM5. But I am not 100% certain that was employed in some of the WM5 cooked ROMS (Can someone confirm this??). I thought it was built into the functionality of the Hermes. I would love to have this functionality again.
anubus12 said:
I've been asking the same question without any fixes. Not sure how to do it. There was a utility called "Smartskey" used in WM5. But I am not 100% certain that was employed in some of the WM5 cooked ROMS (Can someone confirm this??). I thought it was built into the functionality of the Hermes. I would love to have this functionality again.
Click to expand...
Click to collapse
Either use the WM5 dialler (just change to a WM5 dialler skin as described 200 times already) or simply notice that call history and speed-dials are already in the shortlist above the keypad with the WM6 dialler (unless you;ve changed settings in phone.).
I notice the same in all WM6 and it is a pain in the ass too. But the WM5 dialer did NOT work for me, I use a WM 5 dialer since it looks better but still no fix. I agree and have come accustomed to using the history and speeddial list a lot more.
wpbear said:
I notice the same in all WM6 and it is a pain in the ass too. But the WM5 dialer did NOT work for me, I use a WM 5 dialer since it looks better but still no fix. I agree and have come accustomed to using the history and speeddial list a lot more.
Click to expand...
Click to collapse
I agree it's a pain. Can someone please fix this? Or do we have to install smartskey?
Anyone noticed that the latest Black v2.0 reverts back to the older style that we are looking for? Anyone know how this was done? Is it a new dialer or even an old WM5 dialer? The reason I would like to know is because other ROMs don't have this feature. I would like to install it manually on those ROMs.
I love the functionality of pushing the up directional button to get to history and not to scroll through smartdial.
romka said:
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
thank you.
Click to expand...
Click to collapse
EDIT Registry::
HKLM\Security\Phone\Skin
Enabled = 1
.
.
.
Is this OK?
romka said:
I installed the LVSW (Pro Style) ROM, and when I press the Dial button (green) - it goes into phone mode, great.
Now.
If I were to press the button again (to dial the last dialed number) then it doesnt work.
also if I press the joystick UP it doesn't go to history - like it used to with the original ROM.
any ideas on how to fix this?
Click to expand...
Click to collapse
Start -> Settings -> System (tab) -> TweakUI. Make sure that "Enable VideoCall" is selected (checked). Restart your device. You now have a WM5-like smart dialer with the features you want enabled. Up or Right for call history, Down or Left for Speed Dial entries.
John
install HTC_smartdialer2.5 and any wm5 dial skin and you will get the speed dial and history functions back. Can't remember were I found it sorry.
johnburn said:
Start -> Settings -> System (tab) -> TweakUI. Make sure that "Enable VideoCall" is selected (checked). Restart your device. You now have a WM5-like smart dialer with the features you want enabled. Up or Right for call history, Down or Left for Speed Dial entries.
John
Click to expand...
Click to collapse
I don't have TweakUI on Black 2.5. Where do I get that?
Hello all. I'm currently running CRC 10.4 rom and I love the huge task manager option (the drop down thing in the upper right corner on the today screen) but I haven't been able to find it as a cab. I also love the 3G dialer on the S64 rom but can't put it on crc10.4 b/c the crc dialer is cooked into the rom. I've found a nice 3G kaiser dialer but it just boogers up my dialer when I install it.
Can anyone recommend a rom / dialer / cab combo to me? I was thinking about using PDACornerPro.V12 and adding what I want to it, but I don't even know if that will work. I'm at the point where I would rather choose everything that goes into my rom, and spending some time on it vs. trying to cram in everything I can.
Thanks
you can get the latest task manager here:
http://forum.xda-developers.com/showthread.php?t=399546
regarding the dialer: make sure you have netcf installed as well as some certs if you use schens dialer.
it also might be that you have to enable or disable the phone skin (use schaps advanced config for tweaking this)
Ok I disabled the phone skin, installed the 3G kaiser dialer, but now the smart dialing box (with the ugly scrollbars) is boogering up the look. I want it off of there. I installed the 3G dialer on my buddies phone and it works right. How do I turn off the smart dialer?
Figured it out. There is a registry key in HKLM\Software\HTC\PHONE.. something like "EnableSmartDialb". Set it to 1.
you coulod also do it via the phone's menu (smart dialing options).
Hi guys, I need some information about my new Samsung i900 Omnia.
I've installed SPB Mobile Shell and now it looks better...but I'm not totally satisfied.
I want to modify the dialer phone pad because, by default, samsung one is ivory coloured, and with my fantastic black SPB menu is really a bad thing.
I tried to find and edit some .dll file in windows directory, but when I change the original with the new one, after a soft reset, the dialer turns back to the WM6 default.
How can i customize my WM6 phone dialer? Why editing images into the .dll files, I obtain no effects?
Please, please, please HELP ME!!!
P.S.: Just for information (if you need it), Samsung Omnia display resolution is 240x400 (WVGA).
I don't have an answer to your question, but I suspect that you might have more luck if you gave your thread a more descriptive title.
please one dialer for samsung omnia!!!
please!!!!
Yes please, is there any dialer with custom skins for omnia
I just did
I just did a : hklm machine/security/phone/skin : dword to 0 hack to turn off the ivory samsung dial pad which makes the orgin windows dialer avalible...now I just have to find some replacements? I like the change as I don't have to touch the middle key every time when calling automated numbers...the screen seems to stay on...
I am using itje's 10.2 rom and recently installed the phonex dialer (1.4.5). I really like the layout and the functionality, however I've found that I cannot use the call history or the people tab in touchflo to call the application. I know it has something to do with enabling the phone skin (\HKLM\Security\Phone\Skin, Enabled=1), but when I enable the phone skin, incoming calls open both the rhodium phone skin and the phonex phone skin. Deleting phcanhtc.dll provides the same result as disabling the phone skin.
Is there a way to have the people tab, call history, and touchflo contacts open phonex, while avoiding the phonex+rhodium dialer problem?
Thanks in advance.
I have the same problem and wanted to know the answers. anyone? anyone?
I don't know but i'm using gtrab's WM6.5 and installed PhonEx 1.4.5 and it works perfectly.
1. Is there a way for the lock screen dialer to take over after dialing a number? I mean, I use the Resco Contact mgr dialer. After dialing a number through that, I get directed to the ****ty default WM6.5.3 dialer. I'm looking for a way to get directed to the lock screen call thing (which is much faster and responsive)
2. Is there a way for the Wm lock screen call thing to come up automatically whenever theres an incoming call? I found this: "http://www.xtkit.com/archives/32", but this doesn't work as efficiently, though it'll do if there's no better solution.
Thanks.
You can use Iconsoft PhonEx or HTC Phone Canvas (search) if you don't want the default dialer.
For automatic locking on an incoming call, you can use Smartlock.
Wow. That...that is an excellent dialer, PhoneEx. Wonder why I haven't heard of it before. Solves all my dialer problems. Thanks a lot
I use the default dialer and I like it alot. Granted I skinned it. But I have auto-lock on, which when used with the dialer, will switch to the lockscreen after you dial a number. The In-Call lockscreen has lots of functions like Speaker, Contacts, etc. Pretty neat.
My latest LITE rom is setup pretty slick using all standard WM apps.
@player911: Which auto lock app do you use which switches to the lockscreen after dialing? The same smartlock that Livven mentioned? I'm quite happy with PhoneEx, but it's commercial, so I'd prefer If I can setup something free.