Has someone got these files for me from the WM5 rom?!
GSM610.dll and msfilter.dll
i want to try to use them on the 2003SE BA.
the filter uses a new echo filter, that can be very usefull!!!
hallo,
I only got a gsm610.acm module.
And is it working on 2003?
Nope, not working ,
trying WM5 now btw. isn't working there either.
Is it safe to upgrade to WM2005?
I read it can turn your phone into a paperweight...
Is it easy to do?
I have done it with succes...
am trying to get some anoying notifications out of its system though (message sent etc)
also the ability to activesync over gprs is missing, this i used a lot!!!
so there are some points i want fixed!!!
but to conclude: it works.
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
kame1986 said:
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
Click to expand...
Click to collapse
Try searching with a google advanced search - limiting your results to http://forum.xda-developers.com
Try say "BBconnect Trinity" or "Blackberry Trinity".
It's there I promise.
If its there plz point me in the rite direction. wud appreciated muchly !
will also search though.
For KAME1986
Hello,
I have just finish to upload the .cab on rapidshare.
http://rapidshare.com/files/50855639/bbconnect_wm6_pro_4.0.0.90.cab.html
Enjoy.
Private69.
@++++
could you upload not in Rapid pls..
thx
Finally i have a steady WM6 version with works with BBConnect !!
Thx
try this...working on my trin
try the steps here to get bbconnect working.
http://www.sems.org/entry.asp?ENTRY_ID=276
Graytraveler, try .84, 90 did not work for me with a stock Tytn II, but 84 did. Or I used Dutty's latest ROM from Xda-developers.com and .92 worked fine with that.
Hchickers, you can try this:
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, such as Resco (www.resco-net.com) or Total Commander (www.ghisler.com, I use 2.5 beta 3). Then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Then soft reset and install Blackberry Connect. This method worked for some people (they weren't using 750, but still). It might work for you as well.
Click to expand...
Click to collapse
even if this isn't any help for people getting started with BBC on there trins, all new BBC updates get posted there.
p.s. If u dont have bb service from your network before!!, then bbc will never work.
Hy Guys, I was looking at the thread in the forum, I need a WM6 ENG Rom for IPaq hx2795 that really works. I can pay by PayPal, let me know who has it or can generate it. I am really tired of WM5, it is very slow and freezes all time. Tks.
Maybe to give a try to kozhura's AKU3_52_hx2000 (WM 5.0 English) for IPAQ hx2000 series. I tried it to my hx2490b and is faster than the original. Look at this thread:
http://forum.xda-developers.com/showthread.php?t=326214&highlight=hx2000
I think works for your device, and someone allready try it.
Russian developers don't sleep....
WM6 for HP iPAQ 2*** series
Very good news!! Thanks a lot
The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.
nunesfl said:
The link to the russian ROM for IPaq hx2*** series does not work... anyone else has any clue where I may find a valid ROM for the hx2795 ? tks.
Click to expand...
Click to collapse
LOL!!!! No comments....
Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.
nunesfl said:
Sorry, it was my conexion here... I am downloading it now and will give it a try. tks.
Click to expand...
Click to collapse
Hi,
How is it going, please let me know once you flashed the ROM,
hi nunesfl,
every thing works fine except A2DP, Did you give a try yet ?
This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
MagLite_RUS said:
Russian developers don't sleep....
WM6 for HP iPAQ 2*** series
Click to expand...
Click to collapse
Another BUG in WM6.0:
When using TCPMP player, you can not hear any audio from wmv video. Strange?? I can play and hear the same video at WM5.0.
abbaml said:
This wm6.0 also has the same BUG of battery drained by automatic active sync running.
ABOUT A2DP:
I think someone here must contact Khozura, he successfully make a2dp worked on hx4700 BT either on WM5.0 & WM6.0 by special patch cab.
Please someone here who knows Khozura ask him to make a patch for hx2000, thus we can enjoy a2dp.
Please..please....
Click to expand...
Click to collapse
I have used this rom on a hx2190, and i have found it impossible to sync my calander, being unable to use any of the windows live programs and there is no remote desktop mobie. Apart from them it seems to work
Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.
nunesfl said:
Hi all, I put it in my hx2795, the A2DP does not work, the fingerprint reader does not work, the TCPMP sometimes work and not with AVI and does not work with WMV.
I can not see the contrast and error reporting tools, I saw a post where the developer said it is a case of editing the registry but does not say where...
The boot at first time did not work I was in panic, after that took out the sd and cf, drained the battery and retried, it booted but I am afraid of rebooting it again...
I did not try Windows Live and sync calendar, hope it works...
I have tried other tools (excel, word) and it worked well.
I am not sure this ROM is stable yet, any sugestions ? should I try reflash it back to WM5 or there is anything I could do to minimize these problems and keep the WM6 ?
Please help.
Click to expand...
Click to collapse
OK,
I am having the same hx2795 and I found the following
a) Active Sync is working, When I tried at first time it didn't work. After I did a hard reset then I enabled "Advanced networking" from the "USB" settings menu then it worked
b) Sync over Exchange server working fine
c) WiFi is working, I checked with WEP security
d) Bluetooth is working but A2DP is not working When I tried "High Quality Audio Profile" it says authentication failed, I never see it is asking me for the pass key, so I guess that may be the problem
e) TCPMP works fine for FLASH and AVI movies, WMV does not work because WM6 uses a higher version of codecs, so you have to use WMP or you need to replace the WM5 codecs, search through over the forum you will find a solution
f) Finger print authentication works great.
g) Windows Live and messenger is not working, it says there is no connectivity and I don't know what is the deal. But IM+ is working just fine
h) You can install Finster-WM6_RDP.cab as a Termial Service client, it is very good than the inbuilt RDP client in the original HP ROM and it allows you to connect services that use custom ports
i) ROM seems to be stable and I don't have any problem with other functionalities atleast untill now
HX2790B
hi i have a hx 2790b ipaq and is wondering if there is a WM6 Rom update for it reading this thread it seems there is for the 2000 series, but i cant find the link for wm6 for the 2000 series ipaq's any infomation is appreciated
many thanks
Ben
It works for my hx2490b. The link is here:
rapidshare.com/files/53282580/WM06.rar.html
will this work with transflash / transflash hc cards, and currently my hx2790b will not read a 512 transflash card with sd adaptor, and thats not transflash hc, as i have a 4gb transflash in my N95 and that can read it lol
Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?
we need some detailed instructions for wm6 on a HX2790b as i have tried all sorts and all i get is incorrect device sku,
please help
am desprate
nunesfl said:
Dear anavas,
I tried to reboot and reinstall as edcom suggested in another forum. WM6 is working now better and I can reboot.
I could not do 'contrast' and 'error reporting' show, any idea ?
Click to expand...
Click to collapse
Hi,
even I don't see the contrast and error reporting menu, so I guess it might be work for some other hx2000 series and not for hx2795, or it may be some registry hack, I don't know
Hello guy`s i have question and hope someone to help me with this solution!
So befor sometime i flash my HD and now im using a Davideuck v5 ROOM and after this also i flash my Radio Version to 1.13 .. all is fine the phone work perfect and is very fast also with the new Radio Version i can say that is more than perfect i have very strong network signal and the other items that use the radio work without a problem and more faster.
But i found after all this flashing that my Bluetooth not work like befor.. i think that when i Flash my phone with Davideuck v 5 or the new Radio 1.13 my Bluetooth change also.. im not very sure from witch one but the problem is that i can`t recve files via Bluetooth!
So betwen My HTC HD and my Brother with are with the same room and radio not have any problem and we both can send and recive files but i try with few diferent phones like Samsung, SE, and Nokia i can`t recive anything any kind of file.. the device when searchng for bluetooth can found me and see me but can`t send me anything and give some kind of problem like "Can connect with the device" etc.
Befor to flash the both phones i was able to recive files from this other phones and now i can`t...
Other way befor few day`s i buy a Bluetooth hands free that was with Version 2.00 and i can use my bluetooth hands free without a problem...
Also i can send files by Bluetooth to every other phone without a problem i just can`t recive from them.. so i think my Bluetooth Version was changing too after this flashing things.. because not have any point i to be able to send files just the other phones to can`t conect with me.. and i think if i try this with phones that have Bluetooth v 2.0 i will not have any problem to recive or send.. but many of the phones are with older Bluetooth versions and befor all this flashing there have not any problem like this i was able to do everything!
On the same time i really like my new radio 1.13 because work perfect for me and i see that worth it.. also the Davideuck v5 room for me is simple the best for now so i wana keep use this just some advice or help how i can fix this problem?
Maybe many peoples like me who flash the phones with the new radio version 1.13 have the same problem, maybe someone cam edit the new Radio Version 1.13 all to be good only the Bluetooth to be defauls like in the stock HD room.
On the same time befor a week i test another things i try to send file via bluetoth from another HTC older model and when we try conection on the other HTC device with is not HD but i forgot what model was was writen when we try to conect " the devices not support OBEX capable" or something like this for 1st time i see this OBEX and i don`t know what exactly mean!
So any of you who have the same problem.. or know the desigion of this problem can write me here!
Thanks in advance and hope someone to be able to fix that problem!
Regards
P.S the problem is solved and the OBEX is enabled so .. the Moderators can close this post!
Thanks
hi guys,
i want to upgrade my samsung i750,
its windows mobile 2003SE ppc .which is the best rom for this device,one more thing can i upgrade it by cab file bcoz i m facing the problem when i connect my windows mobile2003SE to Pc via sync it shows error
''can not exute repllog.exe''
even i hard reset many times but i m still facing the same problem
plz help me.
thx.
Asthis is an HTC devices only you wont get too much atention, however in off topic there is a thread regarding samsung, perhaps there you´ll get more help.
Good luck,
thx for reply bro'
but can u give me the download link please.is this cab files i can direct install to device .
plz help....