Develop Bugs

Looking for T9 input cab (PhonePad)

I do a lot of texting , and the tiny little keyboard just aint as easy to use with my fingers with one hand.
My Artemis didnt have a Keypad , or T-9 input keypad, only had the keyboard, block recognizer, transcriber, & letter recognizer.
My old S200/Jamin had the Keypad dialer , made texting so much easier.
Anyone know where I can located a cab file for T-9 input??
Thanks in advance

Just copy over the cab file in your my documents folder and Launch, you should reboot the Artemis.
This one is international, so with different languages on board.
Greetings

Anyone who have the Norwegian langugae for T9 with PhonePad?

smilys said:
Anyone who have the Norwegian langugae for T9 with PhonePad?
Click to expand...
Click to collapse
Hei! Hvis det er det samme som på S100 kan jeg skaffe det, har en liggende å slenge...
In english: If it is the same dll file that was uesed in the Qtek S100 PhonePad, then I can provide it?
mvh
PK

Kjempeflott om jeg få teste om det fungerer på P3300.
Great

OK!
Norwegian DLL ripped from S100...
PK

Anyone who can help me to get the norwegian file into the program?

Hi Guy,
I have downloaded the file .ab and followed the instructions, but I do not find nobody icon in the device. someone can help me? thanks

German language does not work. I can select it, but when writing SMS it recognizes/proposes only English words. Any solution for this?
regards
Zonk76

Try a soft reset after choosing GERMAN language.
After that, my Phonepad writes T9 in german.

paalkr said:
OK!
Norwegian DLL rippet form S100...
PK
Click to expand...
Click to collapse
Where do I copy this dll ?? I dont have any map called dictionary.
My P3300 doesnt have transcriber, I only have keyboard. And now I've got phone pad.
How do I install transcriber??

Phone Pad WWE version
I have altered the cab and removed all the languages except for english leading to a smaller install - saving you 0.6 Mb

Does anyone else find that the Phonepad locks up sometimes (possibly due to lack of memory), leading to the inability to change SIPs, and the necessity to perform a soft-reset?

CJBS said:
Does anyone else find that the Phonepad locks up sometimes (possibly due to lack of memory), leading to the inability to change SIPs, and the necessity to perform a soft-reset?
Click to expand...
Click to collapse
Not on my wizard or artemis - what device are you referring to?

meschle said:
Not on my wizard or artemis - what device are you referring to?
Click to expand...
Click to collapse
I'm referring to my Blue Angel, but it's the Phonepad taken from the O2 Mini (it may not be the version that's been included with this post if it's a newer one for a WM5 device...).
I'm wondering how memory works for SIP input anyway, because sometimes when I have heaps of free memory, and I use PenPower, it won't change to another SIP (eg. Null Keyboard, which doens't use much memory). Is SIP memory specially allocated?

CJBS said:
I'm referring to my Blue Angel, but it's the Phonepad taken from the O2 Mini (it may not be the version that's been included with this post if it's a newer one for a WM5 device...).
I'm wondering how memory works for SIP input anyway, because sometimes when I have heaps of free memory, and I use PenPower, it won't change to another SIP (eg. Null Keyboard, which doens't use much memory). Is SIP memory specially allocated?
Click to expand...
Click to collapse
The version posted is 1.0 (Build 22364)
Maybe its your null keyboard thats causing the problems - i recall when i used it - it was a bit glitchy.

It's definitely not the Null Keyboard, which I've never had a problem with, as the problems occurred even before I installed the Null Keyboard.
The version I'm referring to is also 1.0, but build 18526. (I don't know why they don't increase the version number like every other software vendor).
I'll try the version posted, and see whether I continue to experience problems (that is if it works on PPC2003....)

Works on PPC 2003SE
Well.... so far so good. At least it works on PPC2003SE - many things these days seem only to work on WM5! Thanks for making this available.

Wrote too soon! It's already locked up on me. Managed to lock the whole device this time, though, rather than just the SIP. I had to do a soft reset. (I'm wondering whether it's a combination of using PenPower and the PhonePad together).

Anyone know where in the Windows Mobile 5 filestructure T9NorwegianLdb.dll resides?
The Phone Pad - International.CAB.zip seem to work fine on the HTC P-3300.
Just point and hold on the small up arrow on the right side of the keyboard icon when you write an SMS to choose it.
Norwegian is not included in the file posted in this thread however.
I guess we need to install the T9NorwegianLdb.dll for that. Anyone know where to copy it? I am unable to find the phone pad directory in WM5.

Installing Japanese Input on Rhodium/Touch Pro2

This thread will hopefully become a communal Work In Progress. I received my TP2 yesterday and have gotten to work right away on installing Japanese IME on my phone. Anyone who can offer useful tips or any help at all, I greatly appreciate it.
12:11 PM 8/21/2009
So far my first attempts have not proved fruitful. As a first step, I installed Olinex's HSPL. After that, I began installing the cabs from Zgembo's Touch Pro/Diamond Thread. I first installed the Let's Japan WM6.1 R07. After a soft reset, it seemed to be installed ok. I could see a few Chinese characters in the predictive text box above the SIP keyboard (although, there were some boxes too). Second step, I attempted to install the Japanese Advanced IME from the same thread. I should note, it clearly states that it's designed for VGA devices, and TP2 is WVGA. I went ahead with the install anyway. And that's when the trouble began. After soft reset, the HTC splash screen comes up, but after that- black. Nothing. No amount of button pressing or anything short of a hard reset resolved it. And that's as as far as I've gotten.
I'm going to do some more reading and then try again. If anyone knows a better way to go, let me know. Hopefully with more input this can become useful to other people living in Japan that require Japanese capabilities on their Touch Pro 2.
*****UPDATE*****
first off, my apologies, i realize that my solution to the problem wasn't clearly stated in my other posts below.
to get Japanese input/output working on your Rhodium/Touch Pro 2, do the following:
install Asukal LetsJapan6 and restart
install Asukal's IME_31J_FULL, but do not restart
install Asukal's Enable_IME and restart
that simple. romaji, kana, kanji, kensaku, tegaki (the handwriting recognition inputs) will all work. XT9/Predictive will be broken. And you will need to switch between かな　カナ or 英数 on the soft keyboard to get the hardware keyboard to type in the language you want.

Try CE-Star Suite Chinese/Japanese enabler
http://www.mobem.com/products/cestarwm5.php

Mesquire said:
Try CE-Star Suite Chinese/Japanese enabler
http://www.mobem.com/products/cestarwm5.php
Click to expand...
Click to collapse
have you tried that on your TP2? what results did you get?
for anyone else trying Zgembo's cabs from the Touch Pro/Diamond thread, can you let me know your results? After installing LetsJapan, for my SIP icon, I'm getting an A4. In the dropdown menu where you select which keyboard to use, it has A4 智能输入 (i can't read those characters at all). anyone know the deal with this A4 menu?

No problem running CE-Star on my TP2 and the interface is in English, but I don't use or need Japanese input so I cannot comment on that.

yeh, I need Japanese input. and the A4 Chinese pre-installed in my ROM seems to conflict with it somewhat.

almost there... i hope
Ok, so here's the situation so far. After nearly 10 resets, I seem to be *almost* there.
I installed in the following order:
1. LetsJapanWM61r07.cab, then reset
2. KeyTouchJapIMEr07.cab
3. Enable_IME_2.zip, then reset
4. Softbank MMS
So far, I am able to send and receive with no problem. however, I'm still not able to type using any katakana, hiragana, nor kanji. even when i use the kensaku, it will recognize the characters, but when i choose the character, nothing shows up. Japanese input seems to be completely broken.
Is anyone on here able to type in Japanese on their device? if so, what program are you using? the relevant programs I have installed are:
Zgembo JapaneseIME
Asukal Enable_IME
Zgembo Lets Japan WM6.1
Zgembo Lets Japan WM6.1 Mincho
Zgembo Softbank MMS
The soft input keyboards available to me are:
A4 智能输入
Block Recognizer
Kana*
Kensaku*
Keyboard
KeyTouch*
Letter Recognizer
Romaji*
Tegaki*
Touch Input
Transcriber
* for the Japanese characters that don't show up when I type

CE-Star has some Japanese support (I need it to show Japanese song names, but not all words are displayed correctly) and Romaji input but since I don't know any Japanese I can't test the accuracy of inputs for you, but their Romaji input appears to work.

@mesquire: yeah, CE Star doesn't work for me. i think i'll need a bit of a more 'homegrown' solution.

Getting Japanese Input running
well, i finally managed to enable Japanese input. previously, i had been attempting to install Zgembo's KeyTouchJapIMEr07.cab. VISUALLY all the keyboards were there, but only a limited few functioned. i did a lot of trial-and-error installations to figure out what effect each cab file had.
after installing the softbank connection I began installing the IME piece by piece. I should mention that the ZTA4 (Chinese) IME is preinstalled in this stock ROM. the keyboards included in this IME are Touch Input, A4 智能输入, Block Recognizer, Keyboard, Letter Recognizer, Transcriber. i'll paste some of my edited installation/setup notes below. if you don't want to wade through that muck, just skip down to the Highlights section below it:
17. Install Keytouch (Zgembo JapaneseIME; 17.5mb) -> DON'T RESTART
18. Install Enable_IME_HTC_HD
19. Check Input (5 new: Kana, Kensaku, KeyTouch, Romaji, Tegaki)
20. Restart
21. Check input, Regional Settings (still no Japan)
22. test input
QWERTY Touch keyboard is fine (XT9 doesn't work)
Keypad only types numbers
small keyboard is fine
romaji broken (no kana)
kana broken (blocks)
KeyTouch broken (blocks)
Tegaki is fine
kensaku is fine
A4 is fine
block recognizer is fine (but sucks)
Letter Recognizer is fine
Transcriber is fine​23. Install CEStar Japan (2mb); no change in SIP functionality; restart; no change in SIP functionality
24. Install Softbank MMS (5.2mb)
25. Install Asukal Lets Japan6 (4.25mb); restart; Regional Setting changed to Japan; Mapple functional; Kana is default keyboard; A4 智能输入 now reads A4 智能▯入; no change in SIP functionality
26. Install 2_IME_31J_FULL.cab (Ask IME 31J) (7.8mb); new input: Roma Ji, Kana, TagakiKensaku, restart, no change in SIP functionality
27. Install LetsJapan WM61r07 (Zgembo Lets Japan WM6.1; 4.25mb); restart
28. Install Enable_IME_HTC_HD again
29. Install 2_IME_31J_FULL.cab again; restart; No change
30. Install Enable IME2; restartl No change
31. Remove Asukal LetsJapan6
32. Remove Zgembo's LetsJapan6 (but didn't remove properly; still in Programs list); A4 is now A4▯▯▯▯; restart; problem occurred with cprog.exe
33. Install LetsJapan WM61r07 again (Zgembo Lets Japan WM6.1; 4.25mb); restart; problem occurred with cprog.exe; no regional setting change
34. Remove Asukal Enable IME; no change
HARD Reset
Highlights
if you have no desire to read through all that and decipher it, it basically says this:
ZTA4 natively allows you to view Japanese (Japanese characters are Chinese characters afterall, but it allows you to see Kanji and Kana)
ZTA4 does not allow you to write in Japanese nor display Japanese in software designed for Japanese OS.
LetsJapan6 (both Asukal's original and Zgembo's derivative) adds Japanese to the 'Regional Settings'. it also installs the font used for Japanese input/output. Of the two, only Asukal's LetsJapan allows software designed for Japanese OS to display Japanese properly (ie. Pocket Mapple). However, neither LetsJapan installs any keyboards (only fonts), so you still cannot write in Japanese yet.
LetsJapan6 (both Asukal's original and Zgembo's derivative) both appear to conflict with ZTA4. I don't know of any change in functionality, but A4 智能输入 in the list of keyboards will now read A4 智能▯入 (if anyone knows of a way for me to completely remove ZTA4, please share).
Zgembo's KeyTouch/JapaneseIME adds 5 new keyboards to your available inputs: Kana, Kensaku, KeyTouch, Romaji, Tegaki; of these 5 keyboards, only 2 work- Kensaku and Tegaki
Zgembo's KeyTouch/JapaneseIME doesn't allow Japanese input; it also breaks XT9 functionality in the English keyboards; Visually it's lovely and everything is there, but it does not function on this particular stock ROM. I should also warn: if you do install this IME, DO NOT RESTART immediately after installing. Immediately after installing, install one of Asukal's Enable_IME files (there's one from long ago and one he recently made for the Touch HD... although, i think they are exactly the same). If you do not install the Enable_IME before you restart your device, after your device boots up and the splash screen fades, you'll be stuck on a black screen, at which point, your only option is to Hard Reset.
Asukal's IME_31J_FULL is the alternative to Zgembo's KeyTouch/JapaneseIME. although Zgembo's is prettier, it unfortunately doesn't work on TP2 (if someone else has had a different experience, please share). Asukal's IME is rudimentary, no fancy stuff like a Japanese Touch Keypad or predictive text, but it allows you to write in Japanese.
Asukal's IME_31J_FULL adds 4 new keyboards: Roma Ji, Kana, Tegaki, and TagakiKensaku. All seem to function perfectly fine as touch keyboards. As touch keyboards though, they're not very finger friendly, so you'll be stuck using your stylus to tap. In hardware keyboard mode, at the moment there is no known Fn key combination that allows you to switch between English and Japanese. This must be chosen by first choosing either かな　カナ or 英数 on the soft keyboard, then typing with the hardware keyboard. And again, if you do install this IME, DO NOT RESTART immediately after installing Same thing will happen as stated above. Immediately after installing, install one of Asukal's Enable_IME files. If you don't, you'll have lots of fun hard-resetting.
After setting up the IME, it should be relatively safe to install the Arcsoft Softbank program. I've been using that and have no problems sending or receiving SMS and MMS... although, I don't know how to use emoji since i think it was something that is inherent in the Japanese KeyTouch keyboard.
So that's my rundown. Hope it will be useful to others. What I want to do now is find a way to Isolate the Japanese KeyTouch keyboard, get rid of ZTA4, and get XT9 prediction working again on both English and Japanese keypad. I'd really love it if Asukal, Alcibiade, Zgembo, larsucks and the rest of the X01HT gang could get in on this and offer some suggestions. Anyone else who has discovered anything interesting, please don't hesitate to post!!

Ookii.org
You should look at Ookii.org:
http://www.ookii.org/software/japaneseinput/​

mschaffer said:
You should look at Ookii.org:
http://www.ookii.org/software/japaneseinput/​
Click to expand...
Click to collapse
thanks, i'm familiar with ookii.org. good stuff. i've been using his pocket dictionary for a few years now. but with regards to his japanese input, i don't imagine there will be added functionality over Asukal's IME, but I do imagine there will probably be less. And still, it's old, so the letters will still be tiny, there will be no keypad, and there will be no predictive text.

Did you try BeeGee_Tokyo's CAB for Topaz?
http://forum.xda-developers.com/showthread.php?p=4102158
I tried it on my Rhodium and it works quite well, though it seems to slow the system down. Only thing I found is that I can't use the physical keyboard to input Japanese.
Topaz and Rhodium are quite similar, definitely in terms of screen res and probably software I think.

e60202 said:
Did you try BeeGee_Tokyo's CAB for Topaz?
http://forum.xda-developers.com/showthread.php?p=4102158
I tried it on my Rhodium and it works quite well, though it seems to slow the system down. Only thing I found is that I can't use the physical keyboard to input Japanese.
Topaz and Rhodium are quite similar, definitely in terms of screen res and probably software I think.
Click to expand...
Click to collapse
thanks for the suggestion. i already got Japanese input working now, but i may try that one in a later configuration.
what i'd like to know now is if anyone else has been able to install HTC KeyTouch (the Japanese version from the X05HT) onto their Rhodium. That is the SIP keyboard I would really like to get functioning, as one-handed typing on the Rhodium would be lovely. Also, I think that the emoji are preset in that SIP, so presently, i can't get them working in my Softbank Mail program. anyone have any success with that?
btw e60202, if you follow the method i stated on the previous page, you can have Japanese input both software and hardware keyboard.

Cool...I'll give that a try and let you know if I have any trouble. Thanks.

@shunsai
I want to buy the HTC Touch Pro 2 here in Germany soon. But reading and writing Japanese is very important to me. So, I am glad that you found a solution for my problem.
But I still have some questions.
Could you tell me where I can download Asukal LetsJapan6, Asukal's IME_31J_FULL and Asukal's Enable_IME?
If it won't work the way I hope it will, how can I remove it from my device afterwards?

dkun said:
@shunsai
I want to buy the HTC Touch Pro 2 here in Germany soon. But reading and writing Japanese is very important to me. So, I am glad that you found a solution for my problem.
But I still have some questions.
Could you tell me where I can download Asukal LetsJapan6, Asukal's IME_31J_FULL and Asukal's Enable_IME?
If it won't work the way I hope it will, how can I remove it from my device afterwards?
Click to expand...
Click to collapse
asukal keeps a blog where he also includes his files. this entry he wrote is about the Touch HD, but the files work for the Touch Pro 2 as well. the 1_Enable_IME_HTC_HD.cab included in the zip seems to be the exact same as Enable_IME_2.zip
LetsJapan6 is available here
most of his other files are available here.
if things don't work out, hard reset will become your friend, so make sure to backup all your files and settings before you install just in case.

Thank you very much for the info, Shunsai!
Have you already found a way to change the input method with the hardware keyboard?
Somewhere I read something about pressing the Crtl and Shift at the same time. Does that work on your device?

Having trouble with text
First of all. I want to thanks to you Shunsai and Asukal!
I'm having trouble to input Japanese with Touch pro 2.
Now everything work good except text message.
When I text with Japanese it shows "????????????????".
It shows fine with email and web browser.
Do you have same problem? Or it is just for me?

dkun said:
Thank you very much for the info, Shunsai!
Have you already found a way to change the input method with the hardware keyboard?
Somewhere I read something about pressing the Crtl and Shift at the same time. Does that work on your device?
Click to expand...
Click to collapse
hey dkun, no, i still haven't found a way yet. hopefully someone with more knowledge can suggest something soon.
quickmo said:
First of all. I want to thanks to you Shunsai and Asukal!
I'm having trouble to input Japanese with Touch pro 2.
Now everything work good except text message.
When I text with Japanese it shows "????????????????".
It shows fine with email and web browser.
Do you have same problem? Or it is just for me?
Click to expand...
Click to collapse
no prob. i'm here to help people in the same boat as me if i can, but really i haven't done anything. i'm just benefiting from the fruits of asukal's labor like you. can you tell me more about your device (which ROM/region)? what order did you install the cabs in? was it on fresh install?
i'm still tinkering around trying to get japanese and english input where i want them, but japanese IME seems to be very tempermental in general. so far, its really only worked for me consistently when i installed in the order in the OP.

Have you guys tried this Japanese display and input app?
http://forum.xda-developers.com/showthread.php?t=445550
No need for separate installs - all in one cab, works on many different devices, also with hardware keyboard. Much smoother than LetsJapan or CE-Star IMO.

Text autocomplete/correction disabled

Does anyone have this working on the TP2 when using the h/w keyboard? This is on a CDMA version. The dictionary file is in the Windows directory, but if I type i and hit space, it does not correct to I as per the dictionary. I've seen some other phones with hardware keyboard have had to disable T9 which also breaks the on screen qwerty keyboard. I'd like to avoid that but still have my text corrected.

this'll help you out...
http://forum.xda-developers.com/search.php
seriously tho, it's been discussed, there's a way around it but you'll lose the functionality of the SYM key on your hardware keyboard & maybe some other things

xnifex said:
this'll help you out...
http://forum.xda-developers.com/search.php
seriously tho, it's been discussed, there's a way around it but you'll lose the functionality of the SYM key on your hardware keyboard & maybe some other things
Click to expand...
Click to collapse
I realize it's been discussed on other platforms. I had not found a relevant discussion for the CDMA TP2. I believe it disables T9, etc.
I went ahead and installed this cab:
http://www.mobilitydigest.com/forums/attachment.php?attachmentid=105&d=1231205891
Autocorrect is working fine on the hardware keyboard and the stock QWERTY soft keyboard is still working.

[Q] Remove smilie face on keyboard

Did anybody found a way to get rid of the smilie face on the sip? I hate it when typing an email for example since the spacebar gets really small when also having a multiple language keyboard. The smilie face is something nice for chat maybe but useless for emails. So is there a way to change the email SIP, probably in the registry to a SIP with the same functionality but without this smilie face?

Try this registry hack:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\FingerKB\InputScopeMap\{805d58c2-096a-4451-b2cb-40996fcb236d}\BaseButtons\lang_0409]
"IS_TEXT"="{013C8739-21A3-4c92-9773-75C0D1235299}"
[HKEY_LOCAL_MACHINE\Software\Microsoft\FingerKB\InputScopeMap\{805d58c2-096a-4451-b2cb-40996fcb236d}\BaseButtons\MultiLang\lang_0409]
"IS_TEXT"="{AD5985C6-6945-4475-885C-BDED65AA5CC1}"

denominator77 said:
Try this registry hack:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\FingerKB\InputScopeMap\{805d58c2-096a-4451-b2cb-40996fcb236d}\BaseButtons\lang_0409]
"IS_TEXT"="{013C8739-21A3-4c92-9773-75C0D1235299}"
[HKEY_LOCAL_MACHINE\Software\Microsoft\FingerKB\InputScopeMap\{805d58c2-096a-4451-b2cb-40996fcb236d}\BaseButtons\MultiLang\lang_0409]
"IS_TEXT"="{AD5985C6-6945-4475-885C-BDED65AA5CC1}"
Click to expand...
Click to collapse
this should be working, indeed. But unfortunately the registry editor just crashes up on modifying. Is there a way to make this into (reversible) .xap for samsung devices? I know these things exsist which modify the registry, but I have not found an open source one yet which I can modify to do this registry edit.
Thanks for the help!

Marvin_S said:
this should be working, indeed. But unfortunately the registry editor just crashes up on modifying. Is there a way to make this into (reversible) .xap for samsung devices? I know these things exsist which modify the registry, but I have not found an open source one yet which I can modify to do this registry edit.
Thanks for the help!
Click to expand...
Click to collapse
I'll make a special version of my Native Keyboard application for you in the evening. It will contain this patch in reversible form.

denominator77 said:
I'll make a special version of my Native Keyboard application for you in the evening. It will contain this patch in reversible form.
Click to expand...
Click to collapse
great thanks!
All language support btw? since i guess this will only be the english keyboard? Same code applies to the italian, etc. keyboards. I believe the values dont change only the folders.
Thanks a lot

Marvin_S said:
All language support btw? since i guess this will only be the english keyboard? Same code applies to the italian, etc. keyboards. I believe the values dont change only the folders.
Click to expand...
Click to collapse
This one is for english keyboard only. Do you need that for other languages too?

Hi Denominator77
Concerning these changes on the layout of the keyboards, I have a question. When I tried to write an e-mail address or a user name of the outlook / exchange configuration the space key is not available (instead of writing a space just move the position of the cursor). I do not know if just for this kinds of fields WM7 use another layout of the keyboard as the ',' is also not available. This is a problem because I need to write a space in my exchange user name as it has the format 'name surname'.
Do you think that it is possible to change the layout of this keyboard or do you build one which force the use of the spaces?
Thanks in advance for your help.

kata said:
Hi Denominator77
Concerning these changes on the layout of the keyboards, I have a question. When I tried to write an e-mail address or a user name of the outlook / exchange configuration the space key is not available (instead of writing a space just move the position of the cursor). I do not know if just for this kinds of fields WM7 use another layout of the keyboard as the ',' is also not available. This is a problem because I need to write a space in my exchange user name as it has the format 'name surname'.
Do you think that it is possible to change the layout of this keyboard or do you build one which force the use of the spaces?
Thanks in advance for your help.
Click to expand...
Click to collapse
Hi Kata. It does not seem to be a layout related issue. The space button is available in that mode. But the input field does not accept spaces.
As I know, user name cannot contain spaces. Maybe you are trying to enter your display name (Name Surname), not the system login. Try to enter your email address without @server part.

Hi denominator77,
Thanks for your answer, the user name has a space and I used with a lot of phones and PDA (windows mobile 5 ,6, 6.5; Android or Symbian) without problems, also the resto of my colleagues at my organization (for everybody user name has two words name and surname)
I think I am not the only one who are suffering, for instance : http://social.answers.microsoft.com...7/thread/3cd68f96-3037-4f57-ac6a-83bc030aeec6
Regards
P.S. Of course, I already tried to enter a lot of options as just the surname, name.surname, the complete e-mail address as username.

denominator77 said:
This one is for english keyboard only. Do you need that for other languages too?
Click to expand...
Click to collapse
cool thanks, took me a while to respond had exams.. do you have the source, than I can modifie it myself with the languages I use.
I think I have to flash a new rom anyway for my omnia since the push things are bugging me like crazy. I hope this will help and than I have to redo all the things again.

denominator77 said:
This one is for english keyboard only. Do you need that for other languages too?
Click to expand...
Click to collapse
Is it possible to make a native keyboard but with Dutch auto correction?

Marvin_S said:
do you have the source, than I can modifie it myself with the languages I use.
Click to expand...
Click to collapse
You can extract the xap and modify xml files.
Also look in the following topic: http://forum.xda-developers.com/showthread.php?t=917886
Maybe I already have implemented a keyboard for your language.
tbk21 said:
Is it possible to make a native keyboard but with Dutch auto correction?
Click to expand...
Click to collapse
No, it's not possible at the moment.

[Q] Can Hebrew work well on Tilt 2?

Hi,
I know this is a topic that has already been talked about a lot, but after going through many pages in different threads and a lot of experimenting, I still haven't found a complete solution.
I am using a Tilt 2 using a Titanium Energy ROM and am looking for a solution for Hebrew input. I have tried 3 cabs so far: HD2_HebrewEnabled_v1.2", "HebrewHD2", and "Uniscribe".
I have discovered that some apps work better with Hebrew then others. Word, OneNote, Phatnotes, etc. have a cursor problem with all three cabs (the cursor stays to the right, and after typing has a "mirror" effect and if you try to place it in a sentence to select text or edit, it will not actually insert or select there but at a different point). Notepad and PhatPad do not have this cursor problem.
The first 2 cabs have a problem with mixed text (heb & eng) in Word, etc. Uniscribe has a problem always putting punctuation to the right even in Notepad (the first two cabs are fine with this in all apps).
Has anyone found a cab that solves all?
Thanks

UPDATE!
After doing more searching, I found another cab at this thread "forum.xda-developers.com/showthread.php?t=554802" called simply "Hebrew.cab" and it is actually better then the other 3 I had tried. It allows mixed text and does fine with punctuation, the only remaining problem is the cursor in Word, etc.
I also wanted to detail some other things I came up with in my research. To get Hebrew on the hard keyboard I am using AEk mapper. A while back I found a layout provided by a generous member (OSM or rbroudo?) and I made up my own phonetic layout, bec I found using stickers very impractical. I found that I could also set a different shortcut to the Home key, w/o interfering with AEK.
Acrobat Reader 2.0 works well with Hebrew and has a rich feature set, you just have to reverse your input when entering a search term.
Ulrich Grieve has a Hebrew Reader for viewing Palm text files.
I found an epub reader called "Freda" which also works with html that works with Hebrew. I found (on html at least) that the settings that worked are "Force Line Direction = RTL", "Force Word Direction = LTR" (I also set encoding to utf8 but don't know if that is necessary).

Perhaps this will be useful for you (if it's been updated for 6.1/6.5):
http://www.penreader.com/pocket-pc/hebrew/Language_Extender_Hebrew.html

AlecTaylor said:
Perhaps this will be useful for you (if it's been updated for 6.1/6.5):
http://www.penreader.com/pocket-pc/hebrew/Language_Extender_Hebrew.html
Click to expand...
Click to collapse
Thanks for the response
I checked the website and highest listed is 6.0 In any case my experience with that software in the past wasn't so great and I am looking for a free solution.
All in all, despite a few quirks, I am pretty happy with the Hebrew situation now. WP7 doesn't support Hebrew at all. Symbian doesn't have anywhere near all the options I mentioned in post #2, not does Maemo on the n900.
Does anyone know how well Android is doing?

Hebrew for Touch pro 2
Hi
I'm a newbe i would like to be able to read and write Hebrew for Touch pro 2
(not change any menu)
What files do i need to install (can you post a link)
(I tried installing Hebrew support only.cab file from the_dude
I get hebrew words but not RTL)

Which ROM are you using?
I found the attached .cab file to work very well with the "Energy" ROM (I use the Titanium with enhanced Mobile Shell), I don't know if it works as well with the stock ROM.
(see my earlier post #2 for more tips)
If it doesn't work well I could give you other links