Related
Can some one tell me how to share my 3G connection over wifi? I need to make the phone as a portable access point.
no can do.
Bluetooth or USB
Try hitchhiker it's free! but I'm not sure if it works for sharing using 3G... try it and let me know http://www.kasuei.com/hitchhiker/
No, It doesn't support to share the 3G connection.
So use Internet sharing over BT ?
Would like to use it as a wireless access point, so I can get access from computer and iPhone, seem like I have hard time to find a solution.
share the connection with the PC by USB. Put a wifi stick/pcicard in the PC and bridge the connections, then the iFoon can have 3G too
Maarten_NL said:
share the connection with the PC by USB. Put a wifi stick/pcicard in the PC and bridge the connections, then the iFoon can have 3G too
Click to expand...
Click to collapse
you got this to work?
or are you saying it should work?
i have tried to share a connection this way but have had no luck when using internet connection sharing/pan.
i did get it to work this way back in the day when the phone ran wm5 and had dun.
do you have any pointers on how to get internet connection sharing in wm6 to let more than one device connect to the 3g connection?
acem77 said:
you got this to work?
or are you saying it should work?
i have tried to share a connection this way but have had no luck when using internet connection sharing/pan.
i did get it to work this way back in the day when the phone ran wm5 and had dun.
do you have any pointers on how to get internet connection sharing in wm6 to let more than one device connect to the 3g connection?
Click to expand...
Click to collapse
seems like you may need an app on your pc to manage/route the connections not sure if this helps but you can try "network Magic" it give you a bit more options on the pc side for managing connections. would like to see where this goes for possible future applications. i'll give it a try when i have some free time and check with an comp tek friend of mine see what he thinks.
Yeah it sucks that no one has created a way to share the wifi connection just like we share bluetooth or usb.
We also need a proxy server that we can run on our phone.
ok, for me the boring part is the time of the connection, you can share via wifi by just turning on your internet sharing in whatever the pc connection, you just need to manually deffine your hermes wifi to 192.168.0.1 and it shares via internet sharing! The question here is that the connections stops after 10 minutes becouse of the warnig "check usb cable connection". Its very irritating to have to start connection every 10 min. !!!!!
awww...iPhones not fast enough Data-Wise for ya?
thought it was supposed to "revolutionize PDA Phones"
hah.
sorry, i had to add my 2ยข against Apple.
Beware, some mobile provider allready use NAT, thus you'll recieve a non-routable IP. I am not sure that you will be able to share a connection of this kind.
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Has anyone else had this problem? I had to finally do a hard reset/wipe to get things working again.
There's another similar report here, maybe in the cdma area.
I'm not clear on your issue. Is this wmwifi not working after a reboot or Activesync not recognizing after the reboot?
And are you using the latest wmwifi?
edit: I'm adding that I downloaded the latest wmwifirouter last friday 18sep09, and I thought it was a vpn/wifi issue on my laptop. My TP2 did not recognize under activesync after I did a few things, but WM did work the one time I tested it.
I am not using wmwifi. I am using HTC CM Internet Sharing:
http://forum.xda-developers.com/showthread.php?p=4170499#post4170499
I figured it was put out by HTC (and free) so it should work right?
It created the wifi access point fine, and I was able to surf with my laptop at good speeds. I left and came back and the internet would no longer connect (laptop or phone).
I tried everything from soft rebooting, to removing the application, to calling *228 (reset the phone), and even manually setting up the verizon data settings. Nothing worked. I just could not establish a data connection.
Finally I gave up and did a hard reboot and restore and it finally worked.
I really need a reliable way of setting up a wifi access point but dont want to risk this fiasco again.
Yeah, I mis-read your first post, sorry!
For me it was as simple as starting the wifi router program and then cleanly stopping it. If forced to quit, you will have no network access. It's happened a couple times for me.
jbass350z said:
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Click to expand...
Click to collapse
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
billu said:
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
Click to expand...
Click to collapse
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
jbass350z said:
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
Click to expand...
Click to collapse
Ah, that's probably for some other reason, no issues with 3G connection for me.
Same problem for me. I connect to the mobile through wifi (Adhoc connection) and the mobile is connected in 3G but I can't surf internet from my laptop.
Enable DHCP
Hi all
Sometimes after using this software you need to renable DHCP in the connections settings. This can be done via:
Start>Settings>Connections>WiFi>Wireless Networks>Network Adaptors>NE2000 Compatible Ethernet Adaptor and then select Use server-assigned IP address.
Cheers
andrew-in-woking
hi i installed e htc wifirouter but it is using my mms setting instead of my phone internet setting. any1 can help?
Hello, I have been searching around for a day and a half now to no avail. I figure I will ask here as a last attempt before I go and buy another USB wifi adapter.
I am trying to use my HTC Dash with WM6.5 to tether an available wifi connection over to my Windows 7 PC. Basically trying to use the phone as a wifi adapter. The phone has no cell data service, but can connect to the home wifi network that is here. My Windows 7 PC has no Wifi adapter (I left it behind >.<).
Here is where I am at. The HTC Dash is connected to the Wifi network, and when I try to select a Network in the ICS program, it says there is none available. I have been able to get USB selected in ICS, and the phone connected to the computer. In Windows I see a Windows Mobile Remote Adapter in the Network Connections area when I sync the device in Windows Mobile Center. But no matter what I try, ICS sharing on the phone will not let me select the Wifi connection it has.
Through my searching I have found a lot of information on tethering 2G and 3G internet through USB, and using the phone as a Wifi Hotspot. But those where no help in this.
My friend on a G1 with Andriod can tether Wifi connections to a pc, and I am wondering if Windows Mobile can do the same thing. I can flash my ROM from to 6.0 or 6.1 WM if needed.
Thanks in advance to any advice given, hopefully someone can help me out
UPDATE: Still have no luck. I found a program called ICS Control v.21, but it only works on touchscreen WM phones, not WM standard. Which means a bunch of crashing.
This program would do exactally what I need it to do... just does not support my phone. Well the search continues... looking like I may just have to go buy an USB Wifi adapter soon.
tethering w/wifi
It does work. I'm currently answering this on my 2nd desktop Vista with my S620 via my home wifi network. Waiting for a 25' ethernet connector to hardware to wifi/modem Not quite sure how it is with a wifi adapter but 2 things I do know from experience. You shouldn't need an adapter.
1st: you can't be in Sync Center while trying to tether, at least in my case on a Vista desktop. It won't let you tether while the sync is running (or your already synced).
2nd: (this worked for me) open internet sharing on your Dash/S620, pc connection-usb and be ready to hit connect the 1st couple of seconds after pluging your usb connector into your phone, and give it 10-20 seconds to actually connect. If you wait to long to hit connect, the phone will start syncing with the computer. Won't let you tether.
RE-read post, missed thar "WinMo" remote part. My bad. Don't own Win 7. Don't know what that is.
Question: Is there an active wifi where you are ? From your post it sounds like "yes"
You do not need a wifi adapter. You do need a USB cord.
I tethered with edge for a bit, but then got to thinking. Try Wifi. It worked, but be quick.
Neither one is super fast but Wifi is definitely faster than Edge. Better than not being on the net at all. Occasionally it'll cut out, just unplug usb, get to connect screen, plug in and hit connect. Should be set.
As a side note: I also tried tethering with G1. Xferd pc driver to Vista from G1 but computer says it can't find the driver. Gave up after 2 hours.
G1 tethering works great on XP though.
Hope this helps. Good Luck. Really cool when it works.
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
ee.mike said:
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
Click to expand...
Click to collapse
I'll have to break out the Dash again and let you know. It's been sitting for weeks since I repaired LCD screen and flashed my TMO Wing. Can't seem to stop playing with it.
Give me a little time and I'll get back to you.
You do have a wifi modem, correct ? I was using usb.
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
ee.mike said:
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
Click to expand...
Click to collapse
Well, in your case, I won't be any help. What I did was run a 2nd computer off of my Dash with a Wifi Modem.
XP in another room with a wifi modem attached on Comcast, Dash on wifi and usb to Vista computer, since I didn't have a 25ft ethernet cable at the time.
Was running Vista-Dash-wifi modem-XP to comcast so I could run 2nd computer without being hard wired.
I'm familiar with wifirouter cab. It let's you use your phone like a hotspot, correct ?
In all my searches for various things for the phones, I thought I saw a different application that did the same thing. Possibly might even have it. I'll check and upload for ya if I find it. Have hundreds of cabs/zips to search. Let you know.
Possibly google it and you might find it yourself. There's a program called: WalkingHotSpot online for $24.99 if you don't mind spending. Dash isn't listed as a supported windows device but looking at the other phones listed my guess would be it should work. Try their DEMO version, see if it works.
Good Luck.......
2AM and I was just wondering......When you received your phone, you also got a usb cable with it, right ?
Why don't you just usb Dash to laptop and use "internet sharing" ????
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
ee.mike said:
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
Click to expand...
Click to collapse
Do you have a home computer ? If so, get yourself a Wifi Modem and set up a home network. $40-60. Although Comcast sold me mine for $20 and I get to keep it. I can get all 5 phones on the internet at the same time, not that I need to. It'll also be so much faster then running thru Edge. Besides the fact video's don't play for crap tethered running through Edge. Just a suggestion.
My opinion stands concerning Apple. Get ready to cough up more fees for internet (ATT). They're doing away with unlimited data. Did you see their prices ?
You'll never catch me with ATT.
I just put WMWifiRouter on my TMO Wing 6.5. let you know how it worked. Setup went fine, so far.
did you try downloading the actual .cab from WMWIFIROUTER.COM it's only a trial for 21 days, the "Free" versions don't work on the dash i've tried many of them.
once you install and get it set up be sure to write down the Access ID and Password it gives you so you can connect to the WiFi signal beaming from your phone from your PC. It works for me to tether a WiFi connection from my Dash to PC though I prefer the more stable Internet Sharing USB to PC and I have an Unlimited Data Plan.
WMWIFIROUTER also lets you tether a connection from your phone via bbluetooth.
I use WMWiFiRouter and its a life saver. It lets you pretty much tether any connection to any other.
Just yesterday I was at a meeting in a resturant with some clients and used it to hook my netbook to the internet and used bluetooth as the connection to the phone. Yes, Internet Sharing can do that, but it has alot more it can do too.
You can use Bluetooth, USB (it shows up as a USB modem), or even set it up as a WiFi Router.
Very cool program and it works perfectly on the Dash. I love it.
I never tried the trial version. A friend of mine showed it to me, so I just bought it. It's under $20. Well worth it if you run into that situation often.
Okay, I can connect to the Internet when I'm using my Wi-Fi connection with no problem, and also when I'm connected via MediaNet. However, when my Wi-Fi connection is on, I get connection errors when trying to connect to Marketplace, AppCenter, etc. I can still navigate the Internet just fine, otherwise, but if I want to connect to the Marketplace, I have to shut the Wi-Fi connection off.
My guess is I fat-fingered a connection setting, but I don't know which one and what the settings should be. Can anyone help me out with the default connection settings for an AT&T Tilt 2? I don't like the idea of having to use my plan data usage to access Marketplace and such.
Thanks
Do you turn off the proxy when using Wifi?
Nope, didn't mess with the proxy setting.
I dug around more elsewhere and found someone with a similar problem relating to authentication for Marketplace. The fix, for Marketplace at least, is to simply uninstall Marketplace. The shortcut remains, so click on that and it asks if you want to install Marketplace. Seems to work just fine after that. Not terribly concerted with AppCenter, and I don't think you can uninstall that, anyway.
So Marketplace is working once more, but the AT&T stuff is still a no-go. AppCenter/Media Mall, Mobile Video, Navigator, etc. won't connect. I ran the restore proxy cab, which did nothing, so I disabled it again. Not sure what I goofed up to render those apps useless.
Make sure you have MediaNet as your selected network. The AT$T ISP is suddenly very flaky.
So I've been using the Tom coding package that installs the mobile Wi-Fi router with no problems until last night... now it keeps trying to connect to ISP.Cingular and then stops... it basically doesn't work now. I've tried to uninstall and reinstalled it dozens of times with no luck.
And yet... the 3G connection works because I can browse through Opera. So...?
OhI might add that I can turn on the Wi-Fi and connect to my in-house router just fine and do what on the internet through the phone. SO... it is definitely something specific with wireless internet sharing.
???
Someone please he me I use internet sharing DAILY
You need to make sure that it is connecting to the correct address. At the bottom of the App, it should have a few different choices of connections to use. Try another one and see if it works. You may have to set up a new connections for this to work properly. Keep in mind that tethering/mobile hotspot is not covered by AT&T's wireless data plan. It is a separate monthly charge. You should be careful when using it too much at a time, so they don't block or throttle your connection.
The device I am trying to connect with to my Tilt 2 is a Samsung Galaxy Tab, and apparently it doesn't like ad-hoc, whatever that is exactly. I was told on the Galaxy Tab section of this forum that this is the case, and that I need some kind of "mobile ap", although again I do not understand what that exactly means. ???
Ah, see that's much better information. So, no, you probably won't be able to connect without another app doing so. Ad-hoc is, simply put, a connection to another device other than a router which is allowing you access to its Internet connection. If the device you're trying to connect with doesn't allow ad-hoc connections, then the Wifi Router app won't do you any good, as that is the type of connection it uses. Most mobile devices do not natively support this, however. The problem, therefore, is with the Galaxy Tab you have, not with the TP2. Find an app or mod that allows for ad-hoc connections and you'll be all set.
Well is there an apparently for the WM phone side of things that will do non ad-hoc??
No. Ad-hoc is a connection between two devices. Unless you use a router, that's how it's going to be no matter if you are using WM, a laptop, iOS, Android, et cetera. The connection type is determined by the device sending the signal. If it comes from a device, then it is ad-hoc. It is not a problem with the software. That is how wifi was designed to work in the first place. The problem, again, is with the Tab, not the WM application.
Well apparently there is a solution for the Tab that allows it to see ad-hoc networks, so I will try that and let you guys know how it went.
Can no longer connect to Ad-Hoc with Tilt 2
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.