i have tried to flash several new rom's on my sons dash and when it gets to a certain point it says that the image file is corrupt and i have unlocked for apps several times any suggestions ???????
broncosfantx said:
i have tried to flash several new rom's on my sons dash and when it gets to a certain point it says that the image file is corrupt and i have unlocked for apps several times any suggestions ???????
Click to expand...
Click to collapse
Try redownloading the ROM and reflashing it. Remember to remove your SD card. If all else fails try flashing from a different computer.
Good Luck
10507
broncosfantx said:
i have tried to flash several new rom's on my sons dash and when it gets to a certain point it says that the image file is corrupt and i have unlocked for apps several times any suggestions ???????
Click to expand...
Click to collapse
I have the same problem, I am using Rom 6.5 3VO 1.30, and now I want to flash new rom but It alway have error 270 when it was copying (about 3%), I have tried to unlock many times and flash with other rom...
What can I do now!???
quangtien_bk said:
I have the same problem, I am using Rom 6.5 3VO 1.30, and now I want to flash new rom but It alway have error 270 when it was copying (about 3%), I have tried to unlock many times and flash with other rom...
What can I do now!???
Click to expand...
Click to collapse
Your problem could be solved by following a link on my signature.
Translation:
Vấn đề của bạn có thể được giải quyết bằng cách làm theo một liên kết vào chữ ký của tôi.
10507 said:
Your problem could be solved by following a link on my signature.
Translation:
Vấn đề của bạn có thể được giải quyết bằng cách làm theo một liên kết vào chữ ký của tôi.
Click to expand...
Click to collapse
Thank you verymuch, last time I have tried but can not (I tried to unlock by your way one time), and I have tried again (I did double), now I can up new rom for my dash.
ps: are you vietnamese?
quangtien_bk said:
Thank you verymuch, last time I have tried but can not (I tried to unlock by your way one time), and I have tried again (I did double), now I can up new rom for my dash.
ps: are you vietnamese?
Click to expand...
Click to collapse
Congrat. The best and stable ROM right now is 3VO ROM.
Yes, I am vietnamese
10507 said:
Congrat. The best and stable ROM right now is 3VO ROM.
Yes, I am vietnamese
Click to expand...
Click to collapse
ke ke...
Where are you? Vietnam or other country?
And do you known the keyboard error: when I press and hold "Q" it appear % (not !), hold "N" => & (not @)...
I have tried to install et9 full but can not solve it.
I have this trouble with both of rom: 6.5 3VO 1.30 and 6.5 3VO 1.40
quangtien_bk said:
ke ke...
Where are you? Vietnam or other country?
And do you known the keyboard error: when I press and hold "Q" it appear % (not !), hold "N" => & (not @)...
I have tried to install et9 full but can not solve it.
I have this trouble with both of rom: 6.5 3VO 1.30 and 6.5 3VO 1.40
Click to expand...
Click to collapse
its the mapping problem, look around this forum for answer
/ps: im from vn too
quangtien_bk said:
ke ke...
Where are you? Vietnam or other country?
And do you known the keyboard error: when I press and hold "Q" it appear % (not !), hold "N" => & (not @)...
I have tried to install et9 full but can not solve it.
I have this trouble with both of rom: 6.5 3VO 1.30 and 6.5 3VO 1.40
Click to expand...
Click to collapse
alexalexoe said:
its the mapping problem, look around this forum for answer
/ps: im from vn too
Click to expand...
Click to collapse
I think we have different keyboard layouts.I don't know what you have, but I have a tmobile Dash with US keymap. My function key for Q is "%" and function key for N is "&". Yes, even after long press on Q I still have "%" and N as "&" as according to my keyboard layout. Anyway, as mentioned some post earlier that Ookba will update his ROM and it will include keymap fix. Hopefully, it will be soon because I can't wait for another updateIn the meanwhile, you can try installing this eT9 cab. It usually will fix all keymap error.
http://forum.xda-developers.com/attachment.php?attachmentid=90606&d=1212678688
PS. yes, i am also vietnamese and living in US.
10507 said:
I think we have different keyboard layouts.I don't know what you have, but I have a tmobile Dash with US keymap. My function key for Q is "%" and function key for N is "&". Yes, even after long press on Q I still have "%" and N as "&" as according to my keyboard layout. Anyway, as mentioned some post earlier that Ookba will update his ROM and it will include keymap fix. Hopefully, it will be soon because I can't wait for another updateIn the meanwhile, you can try installing this eT9 cab. It usually will fix all keymap error.
http://forum.xda-developers.com/attachment.php?attachmentid=90606&d=1212678688
PS. yes, i am also vietnamese and living in US.
Click to expand...
Click to collapse
My phone is HTC S620, and before I uprom to 6.5 3VO (it used rom 6.0), the key map is OK (Q => !; N => @ ...), I have already tried to install et9full and TegicEt9US but they can not solve my problem, I also tried to replace file Et9.Excalibur.Keymap.txt in Window folder but there was nothing changed
Do you have other idea for me?
(sorry of my bad english; I hope to live in US for afew months to learn E, are you student? or you was born in US?)
Related
NEW ROM 3.00.07.21 PDAVIET 20.10.2007 (CE OS 5.2.1933 Build 18533.0.7.0)
Here, the link to download: http://rapidshare.com/files/64196924/HTC_Trinity_3.00.07.21.PV.rar
Filicloe.
how to download it ???
please....any help to find where download it today !!!! ????
on his page , he say download will be on tomorrow .
Hi
when have this to download some one put this in rapidshare.com for we can download to
regards
HTC Trinity 3.00.07.21.PV uploaded
That is rapidshare link for one archive of HTC_Trinity_3.00.07.21.PV.
Hope it works. I test in few minutes.
http://rapidshare.com/files/64196924/HTC_Trinity_3.00.07.21.PV.rar
Cannot access to contacts...
"The file 'RamdomAccess' cannot be opened...
Anyone too??
mikhe69 said:
Cannot access to contacts...
"The file 'RamdomAccess' cannot be opened...
Anyone too??
Click to expand...
Click to collapse
Nops...everything working fine until now...
Have you enabled the option "Enable alphabetical index replacement for contacts" in Options tab of ROM Settings?
If so, disable it
Works fine until now, but it's slower than version 3.00.07.18
And I don't like that recent progams list is emty after a soft reset.
am_pix said:
Works fine until now, but it's slower than version 3.00.07.18
And I don't like that recent progams list is emty after a soft reset.
Click to expand...
Click to collapse
Just remove startclean.lnk from \\Windows\StartUp\ folder.
FInixNOver said:
Just remove startclean.lnk from \\Windows\StartUp\ folder.
Click to expand...
Click to collapse
thanks for the info.
s1rl4ncel0t said:
Nops...everything working fine until now...
Have you enabled the option "Enable alphabetical index replacement for contacts" in Options tab of ROM Settings?
If so, disable it
Click to expand...
Click to collapse
Yep, this was the problem. Thanks for the tip.
Anyway, I think this version is very buggy
1. People call me, and phone doesn't ring (sometimes)
2. Provider name in the HTC Home isn't updated when change network(I have dual sim)
3. the Clock in HTC HOME doesn't update (never saw this bug anywhere)
4. As previous said if enable alphabetical index replacement, contacts stop working. (bad copy of Bepe's work)
The ROM is fast, but with at least this bugs I cannot stay with this one. Going to try something else.
mikhe69 said:
Yep, this was the problem. Thanks for the tip.
Anyway, I think this version is very buggy
1. People call me, and phone doesn't ring (sometimes)
2. Provider name in the HTC Home isn't updated when change network(I have dual sim)
3. the Clock in HTC HOME doesn't update (never saw this bug anywhere)
4. As previous said if enable alphabetical index replacement, contacts stop working. (bad copy of Bepe's work)
The ROM is fast, but with at least this bugs I cannot stay with this one. Going to try something else.
Click to expand...
Click to collapse
The phone doesn't ring problem is also evident on V3.00.07.20.
I'm not really sure is it due to the ROM or radio 1.58. Anyway I downgraded my Radio to 1.46.3 the last 2 days.. currently I don't see this problem yet... will continue to monitor.
USB HDD ???
What program is that?
vdias said:
USB HDD ???
What program is that?
Click to expand...
Click to collapse
It's like wm5torage, to make trinity look like a pen drive.
mikhe69 said:
It's like wm5torage, to make trinity look like a pen drive.
Click to expand...
Click to collapse
wm05torage not working with me... can someone give a cab for this new one?
Does this require part 1 or is it All in one?
Ciao, ho appena installato la rom asia 3.00.07.21 e provando a fare la videochaiamata come facevo con il WM5 originale, cioè andando in contatti e tenendo premuto si apre il menu da dove compare la scritta videocall... Premendo su tale scritta, invece della videochiamata fa partire la chiamata voce. Anche a Voi? Come mai?
Esiste un WM6 che non ha questo "difetto"?
Grazie
________________________
Hi, I have just installed the rom asia 3.00.07.21 and trying to make the videocall as I did with the original WM5, that is going to contacts and holding pressed opens the menu from where the writing videocall appears... Pressing on such writing, instead of the videocall it makes to depart the call voice. Also to You? How come?
Does a WM6 that doesn't have this exist "defect?"
Thanks
great rom but after one or two restarts my device was stuck....
anyway,the iphone keyboard is just wondefull...
there is a way to have only the iphone keyboard of this rom ?
thanx in advance
does this rom still have the nasty adverts on startup?
thats the only thing that puts me off with this persons roms
sanctuary said:
great rom but after one or two restarts my device was stuck....
anyway,the iphone keyboard is just wondefull...
there is a way to have only the iphone keyboard of this rom ?
thanx in advance
Click to expand...
Click to collapse
the keyboard is pocketcm keyboard right? just google for it.
Cool!!!!!!!!!!!!!!
WONDERFUL JOB and looks amazing!!!!! Thanks Pdaviet Team!!!!!!
-----------------------------------------------------------------------------
ROM v3.62.07.07 CHO HTC Hermes is out!!
-----------------------------------------------------------------------------
anyone tried this yet? i used some of the pdaviet stuff on my wizard, i was pretty bloated with apps
That we get where?
here is the pdaviet thread on the pdaviet page, but you have to register to download. i used to get the roms mirrored on another ppc page thats no longer active, anyone registered with pdaviet that can mirror this rom to download?
http://www.pdaviet.net/showthread.php?t=17943
testing...
peterson65 said:
anyone tried this yet? i used some of the pdaviet stuff on my wizard, i was pretty bloated with apps
Click to expand...
Click to collapse
in testing with radio 1.48.00.10 , update results tomorrow
stuck in boot bug
stuck in boot after first softw reset . bug. Try hard reset but same problem
help us Tom Condon
peterson65 said:
here is the pdaviet thread on the pdaviet page, but you have to register to download. i used to get the roms mirrored on another ppc page thats no longer active, anyone registered with pdaviet that can mirror this rom to download?
http://www.pdaviet.net/showthread.php?t=17943
Click to expand...
Click to collapse
Try this: http://pdavnsoftware.com/Mobifuns/ROM/HERMES/HERMES_WM6.0_3.54.07.06_B18533.rar
or:
http://www.mediafire.com/?cwkzjle0dce
http://www.megaupload.com/?d=8BYOIOFN
Here is the info
I was able to register, dont know how as I'm not able to read that language, I have a hard time wiht inglish now imagine that.
So here it is. will test and post results.
Hello!!!
Link Download new ROM, v3.54.07.06 PV
http://pdavnsoftware.com/Mobifuns/ROM/HERMES/HERMES_WM6.0_3.54.07.06_B18533.rar
- Click Link, Login:
user: PDAVIET
pass.: pdaviet
and enjoy !!!
Mobifuns from www.pdaviet.net
Keyboard layout
I installed this on my 8525, so far so good. Looks great.
My keyboard layout isn't setup correctly though, I believe it's supposed to be setup for the Cingular layout? But I don't remember (or can't find) where to change that setting, and I've been looking for about the last 20 mins.
Any help would be greatly appreciated. Thanks.
-MyTh
DaRkMyTh said:
I installed this on my 8525, so far so good. Looks great.
My keyboard layout isn't setup correctly though, I believe it's supposed to be setup for the Cingular layout? But I don't remember (or can't find) where to change that setting, and I've been looking for about the last 20 mins.
Any help would be greatly appreciated. Thanks.
-MyTh
Click to expand...
Click to collapse
Use this Cab to fix it.
This Rom is not the final Rom, so much bugs. Tommorow will ralease the newest and fix the old bugs. I will show the link to download and test.
Fix bug
nhathoa said:
This Rom is not the final Rom, so much bugs. Tommorow will ralease the newest and fix the old bugs. I will show the link to download and test.
Click to expand...
Click to collapse
thanks a lot, on my TyTn on softw reset Stuck in boot, i hope fix in final release
DaRkMyTh said:
I installed this on my 8525, so far so good. Looks great.
My keyboard layout isn't setup correctly though, I believe it's supposed to be setup for the Cingular layout? But I don't remember (or can't find) where to change that setting, and I've been looking for about the last 20 mins.
Any help would be greatly appreciated. Thanks.
-MyTh
Click to expand...
Click to collapse
Or this for cingular Keyboard Layout
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)
sacwoo said:
Use this Cab to fix it.
Click to expand...
Click to collapse
Awesome, thanks.
Here is the info for the new one
ROM v3.62.07.07 CHO HTC Hermes (TyTN)
~~~ BLACK & TOUCHFLO ~~~
=== CE OS 5.2.1938 Build 18538.0.7.0
Hello!!!
Link Download new ROM, v3.62.07.07 PV
http://pdavnsoftware.com/Mobifuns/ROM/HERMES/HERMES_WM6.0_3.62.07.07_B18538.rar
- Click Link, Login:
user: PDAVIET
pass.: pdaviet
and enjoy !!!
Mobifuns from www.pdaviet.net
[Hello!!!
Link Download new ROM, v3.62.07.07 PV
http://pdavnsoftware.com/Mobifuns/ROM/HERMES/HERMES_WM6.0_3.62.07.07_B18538.rar
- Click Link, Login:
user: PDAVIET
pass.: pdaviet
and enjoy !!!
Mobifuns from www.pdaviet.net[/QUOTE]
Hello Thnx for the rom
Installed it:
So far so good very responsive even Tflo and cube are fast.
haven't had the time to test al the details but let you know what my findings are.
thanks, in testing, stable until now and no problem with stuck boot.
update later.
there is cab file for same keyboard like v3.54.07.06 rom?
fix for not inizialize camera
if after flash rom not inizialize camera:
switch off phone and remove sim card
start phone and switch off again
insert sim card switch on and camera start
pretty and fast. . Có các Bác Việt Nam ở đây vui quá!
I flashed the rom and it seems great but can anyone post the details in english please
wm 6.1 [NEW]
wm 6.1
PS- wm6.1 is usable now .. thx to MoMo from PDAMOBIZ .. it's kinda hard to fix the xip problem on p51 ..
i helped him out tiny bit .. more likely .. just giving info what he needed ..
if u'd like to follow his work .. i recommend u all check at pdamobiz ..
MoMo rearrange xip map and did some tricks to make it work ..
i'll update new rom here again when there is a better rom ..
i don't have p51 with me now .. no more support from me ..
enjoy your new rom !!
*** add up ***
i deleted all old rom from this page .. my previous wm5 and wm6 ..
i think u don't need them anymore ..
wm 6.1 is much better .. faster and stable ..
thx MoMo again ..
this is the link of MoMo rom ..
http://www.pdamobiz.com/forum/forum_posts.asp?TID=130453&PN=1&TPN=1
*************
================================================
donate is welcome
================================================
Want to support me?
Buy me a coffee or snack at PayPal = [email protected]
Thank you so much!
================================================
Thanks 4 ur new rom . Everything work well except the problem that sometimes my phone lost signal. Only the signal, GPRS has still work . Can u help me solve that problem . I think u can ^^ . Thanks
regarding the 6.0 ROM, is that the clean ROM or the modified ROM?
thx
Neogin,
what happened to your P51? did you change to a new device? I am quite sad to hear you don't have the P51 any more. That means no more improvement from now on...
thanks for all your hard work!
Thanks for your new rom .! Everything work well, but i don't like your apps add on . May you give me a clean rom WM6.0. Thank you so much! T'm waitting for your rom Wm6.1
cu_heo said:
Thanks for your new rom .! Everything work well, but i don't like your apps add on . May you give me a clean rom WM6.0. Thank you so much! T'm waitting for your rom Wm6.1
Click to expand...
Click to collapse
Máy bác dùng có bị hiện tượng mất sóng không thế
vẫn thỉng thoảng mất sóng như bản gốc . không biết là do mạng hay sao nữa tôi dùng mobi ở nha trang. Bác cũng bị à, pótay.com
P51 WM6 ROM - Re-Upload
Hi Folks,
Could someone be so kind as to re-upload the BenQ P51 WM6 Final ROM (by the MASTER neogin) please?
Thanks every so much
neogin - khob khun mak khrap pi
Help
Coould you pls help me about this:
My PDA is BenQ-Siemens P51
The phone signal is off, can not tuen it on
My Device Information notes that have no Radio Stack (blank)
Pls show me how can I fix this problem!
Thanks,
neogin สุด love,
Great works.
Don't play iPhone and forget WM.
vivi
benq p50 rom
i have a dumb question Is this rom work on benq p50??
Re-upload
Hi
Could someone be so kind as to re-upload the BenQ P51 WM6 Final ROM (by the MASTER neogin) please?
Thanks so much
Hi
Could someone be so kind as to re-upload the BenQ P51 WM6 Final ROM (by neogin) please?
Thanks!
i had the rom, installed it, it sucks big time and i deleted it.
bottoms- dont bother trying it.
went back to my wm5 aku3.5.
WM For P51
that is not true the last version works good, and is here.
http://jack.xtremdesign.net/blog/?p=168
luisaml said:
that is not true the last version works good, and is here.
http://jack.xtremdesign.net/blog/?p=168
Click to expand...
Click to collapse
I tried the 25/2 version.
Its terrible. i could not set the date to 2008!
Cant go any further because syncing will be a big issue.
So did you try or yr basis is based on the blog?
wm 6.1 beta rapidshare link please ?
neogin said:
Benq P51 Blog
p51 blog
wm 6.1 - 26 feb 08
wm 6.1 beta
Click to expand...
Click to collapse
Link died. Please post w6.1 again, thanks. Is it English version?
Attaching page from pdamobiz
http://www.pdamobiz.com/forum/PDAforum_posts.asp?TID=129424&PN=1
here is the final one of wm6.1
http://rapidshare.com/files/110083411/19209_Clean_CF2_PG6MB_WWE.rar.html
u can also find it from pdamobiz
neogin said:
here is the final one of wm6.1
http://rapidshare.com/files/110083411/19209_Clean_CF2_PG6MB_WWE.rar.html
u can also find it from pdamobiz
Click to expand...
Click to collapse
Many thanks! This ROM is faster than the Final 6.0 but I think the sound is not so loud. Great NEOGIN!
I dumped a Dutch ROM that came with the Dutch Diamond. After that I reconstructed it. I do not have the time to test it now, but if someone dares to try I have checked it with a ROM edit tool and it gave no errors.
PLEASE remember to flash HardSPL (Developer) from Olinex on your phone FIRST! Do NOT flash this ROM without HardSPL!
Please let me know if there any problems with this ROM, flashing is at your own RISK and I will and can not be held responsible for any damage you bring to your phone...
RvBCrS
LINK: http://rapidshare.com/files/124405315/Diamond_Dump_Original_NLD_RvBCrS.rar.html
thank you verry much! gonna use this when i want to reflash my device
Please let me know if it works as i did not had the time to flash my own..
It's maybe skilful to tell us what version of rom/radio it is.
rvbcrs said:
Please let me know if it works as i did not had the time to flash my own..
Click to expand...
Click to collapse
only gonna use this as a backup, will only use it when i am selling my phone, not to just try couze don't want to f*ck-up my device
Oppainter said:
It's maybe skilful to tell us what version of rom/radio it is.
Click to expand...
Click to collapse
There is none I only put the OS part in it, the rest is widely available so for me the OS part was the only thing of importance..
samstar said:
only gonna use this as a backup, will only use it when i am selling my phone, not to just try couze don't want to f*ck-up my device
Click to expand...
Click to collapse
Woudl not use it as selling method nobody wants to have the diamond then
Yzord said:
Woudl not use it as selling method nobody wants to have the diamond then
Click to expand...
Click to collapse
ya it is, couze if i sell it it's to a r-tard, that can't read english
Just flashed it with no problemo
only thing is that it didn't came with the toutch 3d.. tried to find it in the menus... till yet couldn't find anything..
r 1.00.25.03
g 52.26a.25.09
d 1.35.00.00
did u backup-ed ur SPL?? if u did can u share it please??..
was trying to dump mine yesterday but couldn't get any further then part 1 till 3, and also 4-got 2 save my SPL....
my original came with
r 0.93.25.NS26
g 52.26.2509H
d 1.35.00.00
Use2Smoke said:
Just flashed it with no problemo
only thing is that it didn't came with the toutch 3d.. tried to find it in the menus... till yet couldn't find anything..
Click to expand...
Click to collapse
there is already another thread with somebody who is trying to reconstruct the dutch ROM. I also tried it(with kaiser kitchen), but at my try, touchflo3D was not in the ROM....and the guy in the other thread has the same problem
That guy is me, and indeed I have the same problem.
Very strange indeed, there seems to be something wrong with the manilla package...
hmm, bummer. i still need the dutch rom to restore my touch diamond. it's going in for repair , because of the batteryproblem and a sound and speaker problem.. anyone experience with the support of HTC?
Don't worry, no problems if you send a flashed Diamond
really? because i still have a modified SPL..
* 1.40 unsigned hardSPL with WWE 1.37.707.1 ROM *
kenny89 said:
really? because i still have a modified SPL..
* 1.40 unsigned hardSPL with WWE 1.37.707.1 ROM *
Click to expand...
Click to collapse
Never had a problem with my TyTn II
ooh ok . Did you restore your phone before you claimed your warranty ? or did you just delivered they phone with hardSPL and a custom (WWE) rom?
* ontopic: is there a fix for the dutch rom WITH touchflo 3d?
kenny89 said:
ooh ok . Did you restore your phone before you claimed your warranty ? or did you just delivered they phone with hardSPL and a custom (WWE) rom?
* ontopic: is there a fix for the dutch rom WITH touchflo 3d?
Click to expand...
Click to collapse
Send it away with the hard SPL, and a flashed ROM,
Had zelfs contact met HTC ( Mw. van Impelen ) en wist dat ik hem geflashed had )
No problems at all
Yup, heb het TouchFlo 3D programma gevonden!!!!
Yeah, the TouchFlo 3D program have been found!!!!
Het zit in de folder Windows onder de naam PT_Manila_REG. Installeren en je kunt in Vandaag-Item de TouchFlo 3D aanvinken. Er zitten nog meer cab-bestanden in de Windows folder, zoals de NL-versie Opera 9 voor WM6. Zoek en gij zult het vinden
The TouchFlo 3D program locates in the Windows folder with the name PT_Manila_REG. Install it and you can thick the TouchFlo 3D item in the Today-menu. There are more cab-files in the Windows folder, eg the Dutch version of Opera 9 for WM6. Seek and thou will find
ROM CHO ARTEMIS & LOVE-V6.1.206.2 WWE
***CE OS 5.2.20931 Build 20931.1.5.0*** ROM by By Microlab
Translated with the help of Google translate
Translation: Vietnamese (automatically detected) » English
Special thanks to the transfer to:
PhamQuang-Man.
Mod-Lamson.
DEV-ROM Sonblack.
-ROM are integrated with 2D Manila interface as the Black dividends.
-The you can view photos and video with HTC-based M2D Album.
ROM features:
-Audio_Manager.
-Audio_Booster.
- HTCAlbum.
-Fullscreen_Player_1_05_080821_0.
-TaskManager_2_1_34837_3.
Manila-2D.
Dialer_Opal-PhoneCanvas (slide to answer or reject calls).
-CommManager_2_1_3_0_Black.
-Volume_Control.
-EnlargedStartMenu.
LichViet-v2_0.
-Advanced_Configuration_Tool_v3_3.
-PowerOff_PPC.
-SoftReset_PPC.
-S2U2-1_18-QVGA.
-S2V-0_42-QVGA.
Synchro-Time 0_95.
-ClearTemp.
-Sim Manager v6.57.
Backup v2.8.0.0-PIM.
-PHM Registry Editor v0.70.
Some images of ROM:
DOWNLOAD LINK:
http://www.mediafire.com/?kzmnynlitni
I could not understand what this is: (Can someone help)????
Note: You do have loaded ROM V6.1.206.2 before 10h54 (Day 26.11) please reload the Fix Up for re-ROM nhe.Do so productive when their applications should Build Slide Unlock Wallpaper (S2V) does not work viec.Minh Fix bug that was.
Original text:
Chú ý:Bạn nào đã tải ROM V6.1.206.2 trước 10h54 (Ngày 26.11) xin vui lòng tải lại bản Fix để Up lại ROM nhé.Do sơ suất của mình khi Build nên ứng dụng Slide Unlock Wallpaper(S2V) không làm việc.Mình đã Fix lỗi đó.
Thanks mate,will give a try.
Can not detect my internal storage card???What ever i wana to install,simply i can not as Certificate missing??
But,very fast and stabile image.
en fr please
any info about free RAM and ROM???
and MMS works in this version????
@[email protected] said:
Can not detect my internal storage card???What ever i wana to install,simply i can not as Certificate missing??
But,very fast and stabile image.
Click to expand...
Click to collapse
Strange thig because my sd card is detected !
it's a 2go one maybe yours is hdhc
Nice rom anyway will try it for a while
the ok tab at the upper right corner seems bugguy sometimes and the icon of the gprs connection seems to freeze !
waiting for your feedbacks ;p
do you able download it??? for me it is impossible.... do you have any experiences with this rom?
rapidshare link plz
media fire link is not working. Can you post rapidshare link. Also does this rom have sdhc support ?
Regards,
Kailash
Its working fine, I do not have a way to upload on rapidshare
kailashnj said:
media fire link is not working. Can you post rapidshare link. Also does this rom have sdhc support ?
Regards,
Kailash
Click to expand...
Click to collapse
Kailash, I just checked & its working fine, I do not have a way to upload on rapidshare
shahdave said:
Kailash, I just checked & its working fine, I do not have a way to upload on rapidshare
Click to expand...
Click to collapse
yes this link work but try you download it... after doesn`t work it....
patko226 said:
yes this link work but try you download it... after doesn`t work it....
Click to expand...
Click to collapse
I have downloaded it and install, works well
Nice rom..but it's doesn't support sdhc
thanks for sharing!
yes, download work now.
After install this rom my phone doesn`t vibrate... do you have any idea why??
setup of ring:
vibrate - NOK
vibrate after ring - NOK
vibrate and ring - NOK
after hard reset - NOK
Could you help me somebody?
Can someone provide a link for the SDHC drivers as this rom does not support SDHC
regards,
Kailash
kailashnj said:
Can someone provide a link for the SDHC drivers as this rom does not support SDHC
regards,
Kailash
Click to expand...
Click to collapse
Here for you
jjsogood said:
Here for you
Click to expand...
Click to collapse
Thanks a lot for the cab file.
I am really loving this rom. It is stable and fast. Just one grouse - I don't like the Manilla 2D interface need more ram. In this rom after using it for a day the ram usage increases all the way till 84%. Hence was thinking if you could build this rom without the Manilla 2D and slide to unlock feature as that would help free more ram. But please do not remove any other applications as this is one rom which have all the application which I require.
Regards,
Kailash
what is the reason that ROM memory usage gets up after few days usage?
Nice try
OK, great rom - untill i found that bluetooth doesn` receive files ... i have tried to modify the value of bluetooth to default(recomended) from advanced config ... but still not working!Any suggestions?Please help me...