hey u guys ive flashed mossis german wm6.5 rom
and every time i launch QuickGPS i get the error "failed to create empty document"
anyone knows how to solve that problem?
THX in Advance
Having the same issue here, tried to install most cabs of quickgps I could find on the forum, but no cigar. Anyone who has a working version of quickgps for wm6.5 please post the cab here.
I found one for the Omnia that updates properly in 6.5....at least on my Raphael 800.
However, the display is kinda fuxed up (screen resolution differences?)....but you can figure it out enough to set it up for automatic updates.
http://rapidshare.com/files/256713862/QGPS_i900.zip
HtH!
found a rom which solves this problem
look in my sig
Please post cab for repair. Thanks
I need this cab file,too.
Would be very nice when someone will upload it.
Related
Hi. So far the only thing stopping me from upgrading is that I haven't seen any definitive word on Japanese input without the floating bar.
Has anyone got this working?
More specifically -- I actually bought AtoK, and wanted to test it before I upgraded. I've seen reports that it works on WM6, but when I installed it on MW5 it trashed my install and I had to hard reset.
So ...
If anyone has only just flashed their rom and wouldn't mind testing AtoK japanese input system, please let me know and I can 'loan' you my copy for test purposes before I take the plunge.
Hmm, I got enabled regular Japanese input on WM5 AKU3.3 (QTEK 2.11 ROM) without no problems... Just installed Asukal's tools: LetsJapanNo5x & IME_32J_QVGA_F and everything works as charm... Not 100% sure if it will work on WM6.
If you want to try and have trouble finding these files please PM me. I would like to try Atok if you don't mind...
Zgembo said:
Hmm, I got enabled regular Japanese input on WM5 AKU3.3 (QTEK 2.11 ROM) without no problems... Just installed Asukal's tools: LetsJapanNo5x & IME_32J_QVGA_F and everything works as charm... Not 100% sure if it will work on WM6.
If you want to try and have trouble finding these files please PM me. I would like to try Atok if you don't mind...
Click to expand...
Click to collapse
I'm not going to test that myself, and I've had mixed reports. Most people say that they get the floating bar with that setup on WM6. I'm not going to upgrade to WM6 unless I am *sure* I can get intuitive and clean Japanese input.
mail me directly and I'll show you where you can try out AtoK.
peter([email protected])lindsey.jp
Though I warn you. I had to hard reset when I tried it on WM5, so you might not want to try it until you've backed up and possiblty flashed a clean ROM.
May take a while to reply, since mail2web server is on the blink today
Atok cannot be installed in WM5 offically. This is why you get BLANK screen after soft-reset.
This is a famous fact.
But Asukal has done great works for us.
Now Atok was reported to work well with both WM5 & WM6.
So please read this page:
ttp://www29.atwiki.jp/htc3g/pages/13.html
Followed Asukal,
If you want to install Atok in WM5,
after installing Atok, DO NOT soft-reset, then install "Default_SIP_Hermes.cab" immediately.
I dit not use Atok and WM6.
lindseyp said:
Hi. So far the only thing stopping me from upgrading is that I haven't seen any definitive word on Japanese input without the floating bar.
Has anyone got this working?
More specifically -- I actually bought AtoK, and wanted to test it before I upgraded. I've seen reports that it works on WM6, but when I installed it on MW5 it trashed my install and I had to hard reset.
Click to expand...
Click to collapse
lindseyp said:
I'm not going to test that myself, and I've had mixed reports. Most people say that they get the floating bar with that setup on WM6. I'm not going to upgrade to WM6 unless I am *sure* I can get intuitive and clean Japanese input.
mail me directly and I'll show you where you can try out AtoK.
peter([email protected])lindsey.jp
Though I warn you. I had to hard reset when I tried it on WM5, so you might not want to try it until you've backed up and possiblty flashed a clean ROM.
May take a while to reply, since mail2web server is on the blink today
Click to expand...
Click to collapse
Excuse me, but what is "floating bar" input?!? When you install LetsJapan5 & IME_32J you get STANDARD Japanese IME (Kana, Kensaku & Tegaki) same one like you get with Japanese ROMs...
FLoating Bar: It appears for me if I install Asukal's supplied Microsoft IME. It's like the windows taskbar that floats around the screen and gets in your way.
...
Thank you for the advice about AtoK ... now maybe i'm ready to upgrade to WM6. Where do I get this .CAB you mention?
s2k7
情報ありがとうございます。僕は日本語流暢にしゃべるのに読むのに非常に努力かかるので日本語サイトはほとんど見てません。なのでAtoKに対する事実を知りませんでした。英語WM6上で日本語入力化にする方法の情報があるところご存知であればぜひ教えてください。そのために一生懸命日本語でも頑張って読みますから（＾＾）ｙ
よろしくお願いします
English:
s2k7, thanks for the info. I don't read Japanese well so I don't follow the japanese forums and didn't know about AtoK . If you have a link for info about using Japanese on English WM6 please let me know. For that I'll do my best at trying to read it
lindseyp said:
FLoating Bar: It appears for me if I install Asukal's supplied Microsoft IME. It's like the windows taskbar that floats around the screen and gets in your way.
...
Thank you for the advice about AtoK ... now maybe i'm ready to upgrade to WM6. Where do I get this .CAB you mention?
Click to expand...
Click to collapse
This one is different, no 'floating bar'.
Make sure you install LetsJapanNo5x first - it's for Japanese font & locale only. Next is IME31J_QVGA, it is for input, you can find it here. & check your email...
Zgembo said:
Hmm, I got enabled regular Japanese input on WM5 AKU3.3 (QTEK 2.11 ROM) without no problems... Just installed Asukal's tools: LetsJapanNo5x & IME_32J_QVGA_F and everything works as charm... Not 100% sure if it will work on WM6.
If you want to try and have trouble finding these files please PM me. I would like to try Atok if you don't mind...
Click to expand...
Click to collapse
Hello,
I checked http://asukal.net/blog/?cat=8&paged=3, and I could find IME_31J_QVGA_F fle, but not IME_32J_QVGA_F; can you put a direct link to that file?
Sorry, spelling mistake... There is only IME_31J...
ahaa. . Zgembo send me a PM with your address. I didn't get an email from you.
http://asukal.net/blog/?p=96 for QVGA
http://asukal.net/blog/?p=95 for VGA
awriiiight.
Thanks Asukal.. It seems some people were confused with the Bagoj one. THAT one gives the floating bars.
Hi guys,
Im one of the guys with a hw6915 who wants the upgrade that HP doesnt seem to be prepared to do any time soon....
Ive been reading as much info as i can, but im of the web programming/design/it support side, and less the programming/development side of things...
Im getting to grips with things i think, im going to need the drivers, the os and things and then need to cook a rom... therory is fine, but i need to pointers...
I read that i can use certain parts from the htcuniversal drivers ie camera/bluetooth/sound...
if a wm6 rom is coming for this, id like to help, or if i need to get this going with my limited knowledge but boundless enthusiasm then ill do that too.
Thanks for reading, hope this isnt somewhere else already!
hw6915 bluetooth manager not working
hi im new to this ive got a ipaq hw6915 witch i love had a problem after i installed a program it locked it in boot mode so i found a patch to re un boot but now my bluetooth manager just locks up the phone when i click on it & i cant up date my quick gps any more please can you help is there a driver or some thing????? its runnuing wm5 the bluetooth is bt-ppc/pe version 1.7.1 build 6700 please help me????????
ipaq hw6915
Please.
I would like to ask you to send me the file "RADIO.NBA" for IPAQ HW6915.
Thank you in advance for your promtness........ martin
[email protected]
HTC Sable / hw6915
Can wm6 rom be installed on this pda
I have Your same problem, i've an italian hw6915 and i'm searching
drivers and other stuff to make a "clean" WM6 rom to be usable on hw 6915.
If there is any new thing please email me at :
anonimoxg (at) hotmail (dot) it
Stable Hw6915 Wm5 English Rom
i have read in several places and sems that the hp6915 / HTC sable can not be upgraded to WM6.
Im still reluctanta nd I wonder if anyone has already succedded with this task. please share!!
below a link to a stable hp6915 english ROM.
http://rapidshare.com/files/151165439/HW6915_ENG_ROM.BIN.bin.html
Ciao!
adriano_w said:
i have read in several places and sems that the hp6915 / HTC sable can not be upgraded to WM6.
Im still reluctanta nd I wonder if anyone has already succedded with this task. please share!!
below a link to a stable hp6915 english ROM.
http://rapidshare.com/files/151165439/HW6915_ENG_ROM.BIN.bin.html
Ciao!
Click to expand...
Click to collapse
Heya.... Stupid question I am sure, but i am going to ask it anyways...! How do I load a bin file to update my 6915 with this eng rom please? I keep having massive failures and incompatibility issues with loads of other roms i have downloaded... drivin me nuts! I keep bricking my 6915, and recovering it with a handy tool i found...!!! but i am stuck with a french phone... drivin me nuts!!!!! Help would be very much appreciated! If anyone else is having 'bricking' issues of the phone stuck on the boot loader... ill drop the app here happily! Hope to hear soon!
how to flash
read this thread from 'mestini' the section GOW TO FLASH
http://forum.xda-developers.com/showthread.php?t=307558
GOOD LUCK
hi all
just wanted to draw attention to this problem.
the official link provided for the tytn rom download does not have the "network wizard". can any one upload the cab or let me know whether i would need to do the settings manually. its a real pain doin those manually...
Thanks in advance.
PS if there is the rom with this please give me the link.
schaps 3.54c rom has it:
http://forum.xda-developers.com/showthread.php?t=322694
I think I saw a cab also somewhere, try a search for the cab.
hello, i have just bought tmobile wing, aka htc hernes. and i was just wondering if anyone has a site which explains clearly how to make wm 6.5 into touchflo 3d (which is just a htc veriety of wm 6.5) i want to basically upgrade to wm 6.5 touchflo 3d (latest v) edition. please if anyone has any instruction link and or instructions and programs and rom i need i would appriciate some feedback, i found a link as i always search forums before posting, however the instructions give were not clear.
Thank you in advance ....
Mike Szalajko
plz help
come on someone has got to know. how . plz help poor little me
Thats great that you found a link. Care to share?
link here
http://forum.xda-developers.com/showthread.php?t=329913&page=3
its not clear i need some good instructions if its even possible, plz now that you see i really didnt just come here for ease can someone help me?
Has anyone found a solution for the extremely small MMS received (and possibly sent) images? I've tried a bunch of CABs and they only allowed for the connection to go through and nothing about size. The only time I've gotten it to work was on the Manila 2.1 builds. Let me know, thanks in advance.
is has to do with the WSPheader....search for it...you should be able to find cab fix ....are you using a cooked rom?
Yes I'm using a cooked rom and thank you! I searched for WSPheader and found this thread:
http://forum.xda-developers.com/showthread.php?t=575652&highlight=WSPheader
post #9 and it worked!
Worked For Me. Thanks.