Related
Worked ok last night, then it crashed (mad colours on screen), so I had to do a FULL restore of radio and rom (seemed to be stuck in bootloader).
So, reinstalled everything, all good, I just cannot get it to turn on WIFI. I go into comm manager, click on wifi, and it tries to turn it on, then comes back with a X next to the icon.
Also the front today screen plugin (the wifi/bluetooth one) doesnt say WIFI: off anymore. Just has Bluetooth:Off
Any ideas
THANKS!
Try to flash back the rom again..
By the way, what rom do u used?..
I only just flashed it again ..
I used the O2 rom 'Xda_Exec_Upgrade_v1.30.162'
Can you recommend another ROM that might fix it?
Also, does reinstalling a ROM reinstall all the drivers? As I've noticed some things stay resident even after a flash; call timers for one..
thanks
while im waiting for replies, im going through roms
trying different AKU ones now from the ftp
could it be a radio issue?
My QTEQ 9000 are on the same situation, made some stripes on the screen and now can´t detect anything!!
The wifi apears I start it but can´t get any signals!!
Any help please?????
i upgraded radio to 1.14 and still same
Try these ROMs
You can find on the forum, Ivan's and Helmi's ROMs.
They are the latest AKU 3.2 and seems to work just fine as O2 ROMs are just AKU 2.X!
I think the problem lies deeper than a hard reset/rom as well, it must do after installing 3-4 roms, and a couple of radios.
Yes ive tried UNI_AKU3_5_WWE_IVAN_Test2 ROM as well.
Same.
Anyone else got any solutions as to what it might be?
installing the latest qtek rom off buzzdev now, includes full radio/rom/ext rom. if this doesnt work, then f**k it, ive spent enough hours on it, and i'll just get a new one on contract tomorrow.
thanks for the people that replied
what about the driver disk, isnt there a wifi thing on there
maybe im dreaming
Have a look in the network adapters list and see if the Tiacxwln card is listed, if not sounds like it is a hardware rather than a driver problem. It's not unheard of for computer hardware to fail for apparently no reason. This is likely if you have tried different ROMs and none of them work.
I´ve tried upgrade radio to 1.14 and I tried Ivan's and Helmi's ROMs.
and the problem persists!!!
Tiacxwln card is listed.
Strange situation because during one year worked very well and suddenly make some stripes on the screen and now don´t detect nothing!!
Maybe antenna problem??
Help us??
Is there a problem with o2 official rom?.. Heard few people also got a problem if flashing to o2 rom..
Nope, not working, tried qtek roms, a new orange rom, still wifi not coming on.
Yes the card does show in network cards.
Oh well
Any help Please???????????????????????????????
I'm opening this thread to find out the answer as to why the Hermes freezes or lockups on WM6.1. It gives you no other option but to soft reset. Unfortunately, it stays on your second splash screen after a soft reset; so, you will resort only to hard reset your device.
In some cases, it even causes to hard reset your device without warning after a freeze. It's not how long you use the device... it's what you are using most frequently.
In my observation over the last two weeks, it freezes in the following occasion:
1. restoring messages using dotFred PIM Backup
2. introducing exchange server settings
3. frequent closing and opening of SMS application
4. frequent sliding in/out of keyboard
To single out the problem, I have not introduced any changes to the ROM or even installed CABs. I am merely trying to use the base ROM like I used to with WM6.
I have tried various ROMs todate: Schapps, PDA viet, TNT, No ROM maker, Faria's and they all result to sudden system fault in the two Hermes that I have in my possession. I figured, this must be a 6.1 thing, but I noticed that it has not been given attention.
So, let us hear your freeze and hard reset problems on WM6.1 guys!
the only rom that hasnt froze on me has been CRC's rom. All the others seem to suffer from this weird problem.
After so many testing, one more would not hurt thanks for the feedback. Will give it a try.
tjlabais said:
I'm opening this thread to find out the answer as to why the Hermes freezes or lockups on WM6.1. It gives you no other option but to soft reset. Unfortunately, it stays on your second splash screen after a soft reset; so, you will resort only to hard reset your device.
In some cases, it even causes to hard reset your device without warning after a freeze. It's not how long you use the device... it's what you are using most frequently.
In my observation over the last two weeks, it freezes in the following occasion:
1. restoring messages using dotFred PIM Backup
2. introducing exchange server settings
3. frequent closing and opening of SMS application
4. frequent sliding in/out of keyboard
To single out the problem, I have not introduced any changes to the ROM or even installed CABs. I am merely trying to use the base ROM like I used to with WM6.
I have tried various ROMs todate: Schapps, PDA viet, TNT, No ROM maker, Faria's and they all result to sudden system fault in the two Hermes that I have in my possession. I figured, this must be a 6.1 thing, but I noticed that it has not been given attention.
So, let us hear your freeze and hard reset problems on WM6.1 guys!
Click to expand...
Click to collapse
I have semilar issue and now the problem is solved. please click on my signature below why did I go back to official ROM for the detail threat.
same here
i even got my device changed since i thought it was a hardware problem.
it only happens on wm6.1 though, so as much as i like the added speed and threaded sms, flashing the original wm6 rom fixed it and from there im going to keep to wm6.0 - it worked quite nicely.
I suspect (a lot) of bigstorage or some bug on the write-to-internal-rom cache/buffer (if exists) associated to any app that writes to fast to the ROM.
I notice when I use anything on SD card that nothing bad occurs but if I use the internal mem (SMS, internal apps, etc) it freezes all the time.
I had these issues until I used mtty.exe to clean up some bad blocks and then flashed Faria R32, since then no more issues (though opera 9.405 sometimes will freeze my hermes).
I had the same problem until I flashed the offical AT&T WM6 rom with radio and then flashed back to wm6.1..
No freezes or hard resets since..
I don't think this is a big storage issue... if it were, wm6.1 in other similar devices like the trinity would have suffered the same fate, but it doesn't.
I really don't see the point of going back to an ATT official ROM before flashing 6.1. But a lot has said that they no longer have this issue after doing so, then it must be RUU related.
It might also mean: a full ROM flashing for 6.1 might be necessary.
Either way, I'll continue testing, but it would be nice if other guys with this issue will be willing to help test it...
I just made some digging, and just found out how some wm6.1 users get their freezes/lockups. There issue was due to radio compatibility.
hmmm... if the WM6.1 ROM was built with OEM from the AT&T Official, then the radio that best match for it is from the AT&T as well.
This might explain that flashing the AT&T official prior to flashing the wm6.1 sets the radio to AT&T.
Hope this will solve the freeze/lockup mystery.
Have any of you guys tried changing/switching RADIO ROM while in WM6.1?
I just did, trying to experiment. Prior to WM6.1, I loaded an Official Dopod WM6 ROM. Then I loaded the Faria-R32 Full version.
Although, I did not have freezes on the first day of testing... I decided to switch to Radio 1.54 since most users flashed the AT&T Official prior to flashing WM6.1. Guess what? It flashed successfully and boot successfully for the first time. However, when I make a call, the audio has a very poor quality. So, I reset it using the reset button just to clear it up; however, it hanged on first screen... then I reset one more time, it hanged on 2nd screen, then I reset again, it hanged on WM screen.
Enough of it, so, I loaded back 1.47.0.10, and I'm back in business? No. The switching of the Radio ROM has caused the ROM to be corrupted... Somehow, the RADIO has something to do with the freezing...
WM 6.1 ROMs are very unstable (Faria, TNT, etc. I tested several, including those "naked" or clean)
After I install some (useful) software like HTC Home and some other 2-3 programs and after some hours it froze (it did with Faria, TNT, etc). TNT´s WM6.1 is a little more stable (takes longer to froze) but Faria´s WM6.1 is faster.
The more we use the internal flash memory, the faster it frozes and requests a hard reset. Since Friday I hard rebooted some 20x (Faria + TNT roms).
I´ll go back to WM6.0 for now.
EDIT: I installed my radio rom after the last main rom and works very well (I update all roms from the SD card). I updated before and after the main rom (but it never got corrupted) and they frozed. In my case nothing to do with the froze.
I nearly advised my friend to send for service thinking a big hardware problem. Thanks as now I know it's not the phone itself .
Hello,
I had the same problem when 6.1 came out on all 19199.0.7.0 builds. For me the solution was to update to a ROM using build 19199.1.0.0. Since then I had no hard resets at all (I am running CRCs PHK v12 Release 9 for about 2 weeks now).
Maybe this works for you as well.
Cheers,
Uli
mmick said:
WM 6.1 ROMs are very unstable (Faria, TNT, etc. I tested several, including those "naked" or clean)
After I install some (useful) software like HTC Home and some other 2-3 programs and after some hours it froze (it did with Faria, TNT, etc). TNT´s WM6.1 is a little more stable (takes longer to froze) but Faria´s WM6.1 is faster.
The more we use the internal flash memory, the faster it frozes and requests a hard reset. Since Friday I hard rebooted some 20x (Faria + TNT roms).
I´ll go back to WM6.0 for now.
EDIT: I installed my radio rom after the last main rom and works very well (I update all roms from the SD card). I updated before and after the main rom (but it never got corrupted) and they frozed. In my case nothing to do with the froze.
Click to expand...
Click to collapse
I don't think it's the way it's accessing the memory; otherwise, other devices would have suffered the same fate. So far, only the hermes suffer the freezing syndrome which means that there is something in the hermes that is not fully compatible with the WM6.1 build.
did you try to flash the AT&T build prior to flashing the wm6.1 build?
hukoeth said:
Hello,
I had the same problem when 6.1 came out on all 19199.0.7.0 builds. For me the solution was to update to a ROM using build 19199.1.0.0. Since then I had no hard resets at all (I am running CRCs PHK v12 Release 9 for about 2 weeks now).
Maybe this works for you as well.
Cheers,
Uli
Click to expand...
Click to collapse
I was hoping someone would release the 19202.1.0.0 build since it has the updated GWES...
After 24hours with Faria-R32 Clean version. I did not have any freezing syndrome. This is after I flashed with a Dopod Official ROM. I only got the freezing syndrome by flashing 1.54 Radio ROM.
My next move is to use a different RUU for flashing.
My Faria 6.1 also hard-resets and locks up
I had just recovered from a previous hard reset and read all posts in this thread and the other one currently dealing with this topic (http://forum.xda-developers.com/showthread.php?t=370185), and had gone down to a previous ATT radio rom and switched off SD power management out of desperation, when my Hermes locked up again. This time, however, after two soft resets (stylus induced) I managed to get it running again. Everything seemed to be in the previous state (all my preferences had been preserved), but I found that all contacts, history and calendar items had gone.
I had installed no other software than the network wizard. I had recovered most information from Outlook and the rest from Pimbackup (which by the way keeps crashing when restoring speed dials in 6.1).
As this must be the 6th hard reset in 6 days, I think I'm going back to Schap's good old 6.0 and wait for a solution.
BTW Don't take me wrong: I'm extremely grateful for all the great work done by the various cooks.
Lockups
I thought I was going crazy;my 8525 would lock up an have to be soft reset and when it came back, the contacts would all be gone.
I use Yahoo!Go to sync my contacts. I use Photo Contacts Pro for my contacts manager. I was trying to figure out if it was either of those causing the problem.
I even have a thread going on Microsoft's windows mobile forum about this.
I get NO answers from anyone. I'm running Schaps 4.30 OS and Radio 1.54.07.00. I have a 2gb sd card that I run a few apps from.
You just described the same problem I have. Thank you for confirming my limited sanity!!!
tjlabais said:
I was hoping someone would release the 19202.1.0.0 build since it has the updated GWES...
After 24hours with Faria-R32 Clean version. I did not have any freezing syndrome. This is after I flashed with a Dopod Official ROM. I only got the freezing syndrome by flashing 1.54 Radio ROM.
My next move is to use a different RUU for flashing.
Click to expand...
Click to collapse
If i could get hold of the 19202 source I would probably post a clean naked version for testing....but alas no such luck. Naturally it would help had i got a source for new ROM builds lol!
mrvanx said:
If i could get hold of the 19202 source I would probably post a clean naked version for testing....but alas no such luck. Naturally it would help had i got a source for new ROM builds lol!
Click to expand...
Click to collapse
I totally agree with you... when I cooked ROMs for the XDA Atom, I didn't want to work with none official ROMs because I wouldn't know what has been altered in the adopted device.
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Intradvocate said:
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Click to expand...
Click to collapse
i too have many problems with 1.93.456.2 WWE baserom. somehow, it just doesn't seem so stable ... not sure if many others are feeling the same for 1.93 roms. i guess 1.37.456.2 ME WWE is still the most stable at the moment...
if only we can have a review on all official rom consolidated in one thread.
Sprite?
Did you use Sprite to backup your previous rom and store it in 1.93xxx?
This could be the cause.
ruffruff said:
i too have many problems with 1.93.456.2 WWE baserom. somehow, it just doesn't seem so stable ... not sure if many others are feeling the same for 1.93 roms. i guess 1.37.456.2 ME WWE is still the most stable at the moment...
if only we can have a review on all official rom consolidated in one thread.
Click to expand...
Click to collapse
Yes i had same problems. imo the 1.93 isnt a stable rom(yet) so im back with 1.37.456.2 this one is just perfect,very stable,less memory leakage.
Well, the problem is still on going. I can't flash my phone anymore for some reason, even though I've tried both, unsigned and signed Hard-SPL, which both of them flash fine. However, the phone gives me error [276] update error. So not sure what exactly is going on here.
Also, no, didn't sprite backup, phone's just being retarded, mobilecityonline will repair it, but it will take almost 4-6weeks, I cannot wait that long. What else should i try?
Okay, nope not fixed... Flashed it with 1.37, connected to the network for a few seconds, dialed somebody and no ring or anything, but when i called my phone i could hear my own voice. So I guess i have to send it in for repair. Damn.
berlinberlin said:
Did you use Sprite to backup your previous rom and store it in 1.93xxx?
This could be the cause.
Click to expand...
Click to collapse
Could you please detail? I've flashed 1.93.xxx just in the day it appeared on the site and after flashing, I've restored the backup made with Sprite Backup to preserve the settings and so on. I wasn't worried about the contacts/calendar since I have them in Outlook, but I didn't want to start all over with settings, install programs and so. I've made the restore in "upgrade mode", restoring also the databases. The result was that I got a verry strange TF3D, displaying "Home" between the operator name and date, and strange behaviour. I've seen also that the animations were taken out so I've flashed back 1.37.xxx.3. Could be any problems generated by the restore operation? Should I use a different restore type (eventually not selecting "restore databases")?
I have had no problem with the new 1.93xx rom.
Touch FLO 3d is quicker (probably because the animation is disabled)..
and the battery life is about 20% better
Radio ROM Anyone
Sounds like the Radio...
What version is everyone on? The 1.93 ROM updates the Radio, have you tried downgrading to 03?
mhbr12742 said:
Sounds like the Radio...
What version is everyone on? The 1.93 ROM updates the Radio, have you tried downgrading to 03?
Click to expand...
Click to collapse
I am on 05 and has no problem ( have been using it for a day now)
I don't know, but If i plug the diamond into my adapter, the network suddenly works and I can actually make calls and everything's fine and dandy, but just on the battery, I can't call anyone, and if I pull out the adapter when the phone gets a signal, the signal stays but again, can't call anyone because i can't hear anything.
It's an awkward problem. I'm not sure if it's my battery or something. So I'm getting another battery off ebay since they don't sell HTC Touch Diamonds in the U.S. yet.
I've been having random freezes with the 1.93.xxx
Anybody else experienced that?
A.
adwinp said:
I've been having random freezes with the 1.93.xxx
Anybody else experienced that?
A.
Click to expand...
Click to collapse
Yes, me I had same problem twice - freezes on PIN input screen, second problem with this release is that sometimes PIN screen doesn't appear. Now I'm back on 1.37 and everything seems to be ok
Intradvocate said:
I have a imported DIA100 phone, and trying it on the T-mobile network here in the states. everything was fine up until today when i upgraded my phone to the 1.93 series, now it randomly shuts off, and it cannot connect to the T-mobile network, keeps saying (searching). I don't know what's going on, I reflashed the device and it still does the same thing, infact it might even be worse now. Restarting the phone doesn't work, as it keeps restarting from the boot. Anyone have any idea what to do? I'm going back to 1.35.
Click to expand...
Click to collapse
THe Problem you've encountered:
1. Random auto reboot
2. Random freeze
3. etc.
It's sounds familiar to me. Well it's maybe have to do with SPL just like the Kaisers do.Well, I said maybe... So, what we did to our Kaiser before is flashing the HardSPL which has the same version number as the ROM flashed. So, if you're using ROM 1.93 then the HardSPL should be flashed is Olinex HardSPL 1.93 or you can try one by one of the developed HardSPL existed in this forum. My saying is, go with HardSPL 1.93 and see what happen. If it's still no go then it must have to do with the ROM itself.
Just my 2cents.
Hi all,
My Diamond is acting weird lately; sometimes (so far it seems at random) when I turn on the device (from standby), the display is grey'ish / scrambled, and nothing works. I have to removed the battery to get it working again.
This happens with all ROMS found here (haven't tried stock rom yet).
Anyone know what this might cause?
I'm running dev. edition SPL from olinex...
Any tips would be greatly appreciated!
/edit; Could this be SPL related?
Maybe perform the hardSPL again?
Reform the battery for a minute. After this hard reset your device a few times.
If this doens't fix the problem use your original ROM and send the device back for repair.
Would be my solution
I have the same problem. Diamond swiches to standby mode and does not resume or just the light switches on and the screen is blank. Sometimes, it even switches off while booting. All the time, I have to remove the battery. And after some "battery remove resets", the error seems to occur more and more often. It also suddenly looses the phone signal but immediately finds a new one ofter 1-2 seconds.
I think it is somehow related to the phone chip-whatever. Because when I turn the phone of it seems to run more stable. Errors are not gone but at least I can use it as a mp3 player then.
I tried lots of roms but none of them worked fine. I even restored the original spl to make sure it is not the spl. But error is still there... stronger than ever
I will send it back to htc. This thing is obviously broken. Its one of the typical qualcomm errors. These chips are... what do you say in english... moody? My old polaris had a similar error. the 3g part of the phone went away.
TerianSilva said:
I have the same problem. Diamond swiches to standby mode and does not resume or just the light switches on and the screen is blank. Sometimes, it even switches off while booting. All the time, I have to remove the battery. And after some "battery remove resets", the error seems to occur more and more often. It also suddenly looses the phone signal but immediately finds a new one ofter 1-2 seconds.
I think it is somehow related to the phone chip-whatever. Because when I turn the phone of it seems to run more stable. Errors are not gone but at least I can use it as a mp3 player then.
I tried lots of roms but none of them worked fine. I even restored the original spl to make sure it is not the spl. But error is still there... stronger than ever
I will send it back to htc. This thing is obviously broken. Its one of the typical qualcomm errors. These chips are... what do you say in english... moody? My old polaris had a similar error. the 3g part of the phone went away.
Click to expand...
Click to collapse
Sounds bad
I'm trying an updated radio rom at the moment, we'll see if it hangs today...
mikkelnl said:
Hi all,
My Diamond is acting weird lately; sometimes (so far it seems at random) when I turn on the device (from standby), the display is grey'ish / scrambled, and nothing works. I have to removed the battery to get it working again.
This happens with all ROMS found here (haven't tried stock rom yet).
Anyone know what this might cause?
I'm running dev. edition SPL from olinex...
Any tips would be greatly appreciated!
/edit; Could this be SPL related?
Click to expand...
Click to collapse
Hi mikkelnl... from what you described, it seems to be a typical problems with the SPL you are using. Depending on which SPL that the original ROM that came with your device, you can resolve by installing the respective 1.37 OliNex HardSPL Unsigned or the 1.93 OliNex HardSPL Unsigned by cmonex.
Try to get it from the same thread that you got the 1.40 OliNex HardSPL-Developers Edition. There is also some explanation on the problems that you are experiencing.
One more thing, Radio 1.00.25.08 also appears to have some detrimental effects on some devices after some usage. And it has a lingering effects too. Try use Radio 07 if you are in Europe or Radio 05 if you ar in Asia...
Having said all these, I must state that these are purely my observations and you really need to try it out for yourselves to know whether it works for you. I have given the same advice to about 5 users experiencing these problems and it had worked for them so far.
Swiftblade said:
Hi mikkelnl... from what you described, it seems to be a typical problems with the SPL you are using. Depending on which SPL that the original ROM that came with your device, you can resolve by installing the respective 1.37 OliNex HardSPL Unsigned or the 1.93 OliNex HardSPL Unsigned by cmonex.
Try to get it from the same thread that you got the 1.40 OliNex HardSPL-Developers Edition. There is also some explanation on the problems that you are experiencing.
One more thing, Radio 1.00.25.08 also appears to have some detrimental effects on some devices after some usage. And it has a lingering effects too. Try use Radio 07 if you are in Europe or Radio 05 if you ar in Asia...
Having said all these, I must state that these are purely my observations and you really need to try it out for yourselves to know whether it works for you. I have given the same advice to about 5 users experiencing these problems and it had worked for them so far.
Click to expand...
Click to collapse
Hi Swiftblade!
Thanks for the reply. I've read about those newer SPL versions, but I didn't think it was the reason for my problems, since I have one of the first Diamonds (can't remember the spl version ). And; the thread mentions "fuzziness issues on some newer diamonds", my screen is not 'fuzzy', it simply is scrambled and the device completely hangs. So I didn't figure that would be the problem
Anyways; I am a bit reluctant to install a new SPL, never did that before...
mikkelnl said:
Hi Swiftblade!
Thanks for the reply. I've read about those newer SPL versions, but I didn't think it was the reason for my problems, since I have one of the first Diamonds (can't remember the spl version ). And; the thread mentions "fuzziness issues on some newer diamonds", my screen is not 'fuzzy', it simply is scrambled and the device completely hangs. So I didn't figure that would be the problem
Anyways; I am a bit reluctant to install a new SPL, never did that before...
Click to expand...
Click to collapse
Hi mikkelnl.. It's really worth a try. the description on the thread is of course vague. It is actually to deal with some discrepancy issues between SPL and the device's specification.
Doing a HardSPL will not affect your rom but it will hard reset it so you get a fresh clean rom. Do perform a backup before you do a HardSPL though. My best bet is 1.37 OliNex HardSPL Unsigned.. Cheerz
Edited: If this HardSPLs can't solve your problems then it might be a hardware issue that you are facing...
Well, I just installed 1.37 olinex, let's see if this helps
Thanks for the input Swiftblade! Now I'll just have to re-setup your 7.0 rom
mikkelnl said:
Well, I just installed 1.37 olinex, let's see if this helps
Thanks for the input Swiftblade! Now I'll just have to re-setup your 7.0 rom
Click to expand...
Click to collapse
Hope it works out for you bro... Good Luck!
Hi,
Few day ago my artemis p3300 got crazy.
it's make random reset, sometimes isn't boot up after reset, it stuck on black screen. or it's coming up and then reset again.
it's also stuck few times on vibration mode. and it's only stop with soft reset.
suddenly I can't turn on WIFI , it's always stay off .
I Try this roms in the last 2 days :
manila 2D pdviet 33 - 36
b&b v 5.0
last I returned to touch 4.02 and I still have no wifi and it's stuck.
I also try to change the radio firmware...
should I throw it ? there is something to do ?
try
1-flash wm5 ship ROM
2-CID Unlock
2-Flash your favourite ROM
U should be OK
i tried to install the original HTC ROM but i still get error #24 - "invalid device id" or something similar. at the moment i can get the tri-color screen by pressing the voice button and soft reset and that's it. when i try to soft reset normally i get a blank screen. plz help?
TIA
finally it's back...
thanks.
I found other Original ROM . I installed it and it work fine.
Then , I installed Manila 2D again and now after I change my Radio Ver, My gps and GSM are working good.
the last thing that no working is WIFI. i can't turn it on!
how do I know what radio version are fix for my device ?
thanks
royis said:
thanks.
I found other Original ROM . I installed it and it work fine.
Then , I installed Manila 2D again and now after I change my Radio Ver, My gps and GSM are working good.
the last thing that no working is WIFI. i can't turn it on!
how do I know what radio version are fix for my device ?
thanks
Click to expand...
Click to collapse
You may also want to try buying a new battery if your device is old. I've seen Wizards act wierd when the batteries go bad. But they usually get swollen - battery pushes out the battery cover.
Also, have you opened your device lately? I had a problem with my reception after I changed my housing. There are small connectors that have to be bent out to touch their corrasponding spots on the circuit board for FM Radio, GPS, Wifi, ect. Have to make sure they touch the right spot.
And of course, it could just be a bad flash. Reflash and try different radios. That's all I can think of.
my wifi is not working too. After manila 2D, and i try old rom, new roms, the newest radio but not working.