Related
Hi all,
Does the XDA2s and Microsofts Voice Command work on a XDA2s?
I'm not English, but I'm sure my English is good enought!
Whenever I give a voice command I get a "please repeate" error..
I think it's something with the mic gain, but where and how do I set it lower? Enabling/Disabling the Microphone AGC settings did not really help!
Any suggestions?
You should rather forget about this application. I tried to use it but with no success, exactly like you. Then I tried other applications (with the same result) and finally I followed suggestions from this forum: Neuvoice - it works and it's cheap.
Rgds
Maciej L
Maciej L said:
You should rather forget about this application. I tried to use it but with no success, exactly like you. Then I tried other applications (with the same result) and finally I followed suggestions from this forum: Neuvoice - it works and it's cheap.
Rgds
Maciej L
Click to expand...
Click to collapse
Thanks Maciej L,
Yes I think I will dump it.. It really sucks...
Looks nice the Neuvoice. To bad there is no demo to test it 1st
Yes there is a demo version, just download the full version from somewhere and it works as demo until you purchase the unlock code (as far as I can remember - but I'm not 100% sure - so you should by yourself)
Rgds
Maciej L
XDA IIs Fonix Application
I have just received my XDAIIs upgrade from an XDA II and it comes complete with Fonix Voice Dial. It automatically records test voices against your contacts (name number) and then you can call it up any time. You can also record your own voice which makes it more efficient. It also works with bluetooth. It seems an OK applicaiton to me.
Is this what you have been talking about? :lol:
In a quiet environment, it really doesn't have any problems with recognizing my commands. As long as you don't have a terrible English accent. However, you can forget about if you are in a loud environment though.
of where you have downloaded it to you.
I don't find any demo in any place
greetings and thank you
XDA IIs Voice Software
I got mine with the XDA IIs cd but try Handango.com who have a good range of voice software including Vito Voice....
you have registered in your cd ?¿?
regards
Voice Command 1.5
well, I have to say MS Voice Command works great for me. 95% hit rate on about 1000 contacts in my xdaIIs. Even in the car. Far better that V1.01. A couple of tips from my experienece with it.
1. Make sure the microphone auto gain is "disabled"
2. If it initially has problems and hit rate is very low, a soft reset usually sorts it out
3. Map the "record" button to Voice Command for easier access.
4. If your car is noisy, use a wired head set while driving. (I have not been able to get the bluetooth voice dialing to work at this point)
Re: Voice Command 1.5
cbrow51 said:
well, I have to say MS Voice Command works great for me. 95% hit rate on about 1000 contacts in my xdaIIs. Even in the car. Far better that V1.01. A couple of tips from my experienece with it.
1. Make sure the microphone auto gain is "disabled"
2. If it initially has problems and hit rate is very low, a soft reset usually sorts it out
3. Map the "record" button to Voice Command for easier access.
4. If your car is noisy, use a wired head set while driving. (I have not been able to get the bluetooth voice dialing to work at this point)
Click to expand...
Click to collapse
Hmmm... With none of the Voice dial programs I've been able to get the bluetooth to work.. Not sure if it's the bluetooth unit itself, or if it's some ROM version thingy...
The BT headset is a SE HBH-600. The XDA2s is with ROM version 1.12.62 WWE and radio version 1.02.00.
Can/will this work with bluetooth voice dialing??
MS Voice Command & BT Voice Dialing
No, sorry, I have not been able to make it work. I think its still an issue with the implementation of the BT stack (in this case the Widcomm stack) on the HTC devices. I can establish a connect from my headset to the device, but does not "link up" with voice dialing.
I now use a regular noise cancelling wired headset in the car, via an adapter plug sold by PockPCTechs (www.pocketpctechs.com) Other wise just use the phone mic to initiate a voice command dialed call
Regards
Chris
Re: MS Voice Command & BT Voice Dialing
cbrow51 said:
Other wise just use the phone mic to initiate a voice command dialed call
Click to expand...
Click to collapse
I was going to ask how well this works?
I'm getting a BT car kit fitted literally in the next hour and was hoping I'd be able to voice dial like I could my old Nokia, while driving.
I am using
O2 xda2s with microsoft voice software
I have a fairly noisy sports car but it works well..
I have the voice mapped to contacts button so one press and direct voice towards pda and no botha.... about 95% hit rate on 200 contacts..
I must add it has only been that good since buying a brodgit car cradle so it positioned well.. obviously you have to turn stereo off
the only complaint i have with it is that when the voice speaks back to you to confirm what you have said I cant hear it very well..
does anyone know of any settings to improve audio levels..
cheers
stay happy
Hi Guys
I have upgraded my 'Voice Command' handsfree solution as follows.
1. Added an FM 'Sound Feeder' from Pocketpctechs, that connects to the xda via one of 2 different pocketpctechs audio adaptors.
2. Tune the radio to one of the 8 frequencies supported by the Sound Feeder and the xda then plays all audio output through the car stereo system. This works for all apps, including my Navman GPS and Media Player!. I also mapped a button (I used the record button) to Voice Command, so one press activates VC and I can initiate a call by voice from there.
The really nice thing about this arrangement is that if i have media player running through the system, and a call comes in, the music mutes automatically, the phone rings, and i can take the call. When you end the call, media player picks right up again!
3. For the microphone part, there are 2 options:
a. The one I am using right now, is to use the pocketpctech 'single' adaptor, that allows sound to play through the stereo, while keeping the mic of the xda active. This means the xda picks up your voice directly for voice command and telecons, while at the same time playing the sound you normally hear via headphones, through the stereo. This works great for the incoming voice, although you need to talk fairly loudly for the party calling to hear you well. Decent enough though...
b. The upgrade I will make this weekend is to use the 'dual' pocketpctechs adaptor. This one accepts the soundfeeder on one side, plus a regular 2.5mm heasdset on the other. This one disables the internal xda mic, and allows you to use the mic from the headset. So I plan to permantly position this mic (after cutting off the ear bud!) on the door pillar as in normal car hands free installs. This should improve the outbound sound a good bit....
Will let you know how I get on
Regards
Chris
In the end, the Parrot CK3100 car kit has its own built in voice recognition, so I have no worries
Great! I looked at the Parrot a while back. How much was it? Work ok?
Regards
Chris
Well, I've not really had chance to test it properly yet, seems to be good. Cost me £180 to have it fitted, the old one removed and a bit of extra power wired in for my GPS & PDA.
Hi Andy
Sounds good. Let us know how it works out for you. I am interested in how the bluetooth connection holds up. I am still having problems with my xda maintaining a connection with my bluetooth headset.
Regards
chris
I have just obtained a Samsung BT wep210 which is brilliant 'cos it doesn't fall out of my ear. But although it has some handsfree functions, it doesn't do as much as my cheapo unit from ASDA. The Asda one allows me to use voice tags when I depress the button on the headset, but when I do the same on the WEP210 it instantly does a last number redial. Am I doing something stupid?
Thanks
Mike
Not all BT Headsets have the same funtions or same button functions. What does the manual say? My Samsung BT Headset does not give me the possibility to use Voice Dial, although i don't know which one i possess
Samson711 said:
Not all BT Headsets have the same funtions or same button functions. What does the manual say? My Samsung BT Headset does not give me the possibility to use Voice Dial, although i don't know which one i possess
Click to expand...
Click to collapse
the manual is poor but it definitely makes reference to voice dialling if the phone supports it - which it does as it's a XDA orbit
Also I have discovered that this (Samsung) headset, does not switch itself off if I leave it in the car and walk off with my phone. In one way this is good as I don't have to switch it on again when I get back in, but it makes me wonder how often I am going to have to recharge it.
Thanks
Mike
I looked around for a post, but didn't find one.
As I understand it, when receiving an incoming call, you have to
slide up the screen, then click the slender "accept" button (and
then click the little down arrows, then click speakerphone if you're
in a car without bluetooth).
Is that really the best/only way to do it? Anyone working on an
app that makes answering calls just hitting the search button or
something?
As of now, I find it very distracting/dangerous to answer calls while
driving.
Tips?
Sorry but I also would like to know how to terminate a phone call without looking at the screen
At the moment I'm turning the screen on, and then click on 'terminate the phone call'
But I'm sure there is an easier way, especially using the physical buttons.
Thanks for any tip.
if you have bluetooth hooked up to your phone, you can just answer the phone call via the bluetooth device.
Bluetooth is the only hands-free way, I'm thinking they weren't trying to make it particularly easy to use while driving, in many places this is illegal, in the US it's happening more places all the time.
Some places are even attacking Bluetooth usage while driving.
ckacey said:
Bluetooth is the only hands-free way, I'm thinking they weren't trying to make it particularly easy to use while driving, in many places this is illegal, in the US it's happening more places all the time.
Some places are even attacking Bluetooth usage while driving.
Click to expand...
Click to collapse
Agreed, and wish MS would also include rSAP as many luxury European vehicles (Mercedes, VW Group including Audi, Bentley, Lamborghini, and other manufacturers/brands) support rSAP, which offers great features such as address book migration to the car for ease of dialing out.
Oranjoose said:
I looked around for a post, but didn't find one.
As I understand it, when receiving an incoming call, you have to
slide up the screen, then click the slender "accept" button (and
then click the little down arrows, then click speakerphone if you're
in a car without bluetooth).
Is that really the best/only way to do it? Anyone working on an
app that makes answering calls just hitting the search button or
something?
As of now, I find it very distracting/dangerous to answer calls while
driving.
Tips?
Click to expand...
Click to collapse
don't answer calls while driving...
enjoythemusic said:
Agreed, and wish MS would also include rSAP as many luxury European vehicles (Mercedes, VW Group including Audi, Bentley, Lamborghini, and other manufacturers/brands) support rSAP, which offers great features such as address book migration to the car for ease of dialing out.
Click to expand...
Click to collapse
I've heard his protocol is on its way out. My Honda pulls the contacts just fine from my HD7 & 2 and the G1, pulls the exchange data and loads it into the car.
ckacey said:
I've heard his protocol is on its way out.
Click to expand...
Click to collapse
Sad if true as with rSAP the cell phone antenna/receiver that is built into the car is far superior in power than the one inside the phone. What protocol of Bluetooth is your Honda using to pull the data and i assume it pulls the data and uses an antenna/amplifier unit built into your car instead of the cell phones?
TBH you dont really need to look at the screen to answer it, flick up and press in the middle on the left....
But like everyone said just get handsfree, if your car doesnt have it you can buy them stupidly cheap anyway.
On the new MINI its really good, pulls the contacts and all of your text messages from the HD7, you can read any new text messages on the navi screen
I think it was HTC or LG that has an app out there that allows you to do various phone things with the placement of the phone. Like turn on the speakerphone by placing the phone face down after you've answered a call or turning it face down while ringing to silence the ringer...
Yeh the HTC app called attentive phone.
enjoythemusic said:
Sad if true as with rSAP the cell phone antenna/receiver that is built into the car is far superior in power than the one inside the phone. What protocol of Bluetooth is your Honda using to pull the data and i assume it pulls the data and uses an antenna/amplifier unit built into your car instead of the cell phones?
Click to expand...
Click to collapse
I think it uses Address Book Profile, it's abbreviated as ABP (I'm not 100% sure what is abbreviated there)
It uses the mic and amp in the car for audio, it uses the antenna built into the phone, I've never used the external antenna port on my phones, I think my Tmo Wing was the last one with this port available externally.
For A2DP I'm using a device called FIPO, and a Soundgate core, and a soundgate Honda kit. The Honda kit hooks to the back of my nav unit and pretends to be a CD changer, so that I can use the controls on my steering wheel and nav screen. The Core is connected to the Honda Kit, core comes in two models, iPod and Zune, I used the Zune for my Zune. I use the iPod Core to connect to the FIPO. The FIPO is controlled by the phone, and it switches between that device and the nav unit's Handsfree profile based on wether or not I'm on a call. After I'm finished with my call the phone switches back to the FIPIO and resumes the audio.
Thanks for the detailed reply, as i use the Dice Electronics unit for an iTouch, which like your unit one needs to remove 6-disc changer and insert the Dice unit that hooks to the iTouch. What i like about rSAP is that the car has a far better cellular amp/antenna plus rSAP migrated contacts from the SIM to the car's computer. While i could take out the sim card and insert it into the car directly, that is a hassle versus using bluetooth rSAP for each time i enter/leave the car. The car does work via 'basic' normal Bluetooth with the WP7 for handsfree with all the usual features, yet enjoyed the rSAP advantages. Thanks again, ALL help is ALWAYS apprecaited.
OK, first post here, but I think it's a useful one!!
Collected a Galaxy S2 on Monday night from the 3 store in the Trafford Centre. Absolutely love it!, fantastic handset.
Or so I thought until last night.....
This was the only bugbear/issue that the phone gave me and gave me no end of grief; I paired it with my Parrot 9200 Car Kit, as with any other phone. All seemed to be well.
That was until I tried to make a call. When I pressed the green button on the handsfree to initiate voice dialling, android launched the "Voice Commands" program, which tried to take over. Unfortunately, the voice commands program required a little bit of interaction with the phone, and wasn't particularly accurate over bluetooth.
Tried deleting and re-pairing, turning off voice commands over bluetooth, which just bypassed the hands free mic, to the handset!!. Grief grief grief.
OK, I thought, I'll just manually select the numbers on the car kit. A bit of a ballache, but it'll do!
Wrong, the phonebook hadn't downloaded, and no amount of tweaking the car kit or the phone could sort it.
There was very limited info on this, hence the reason for this post!
After much googling, I found that the latest version of the Parrot firmware had an additional pairing setting; "Force AT Sync".
So, car kit updated with the latest firmware from the Parrot website, on the car kit, I navigated to Settings>Bluetooth Settings> Pair With> Force AT Sync. (This is at the bottom of the list of phones that the kit "knows" about by default.
Seconds later, my phone was requesting permission for the car kit to access the phone book, and syncing away nicely.
No more voice commands software, and the Parrot kit is working as it should, completely hands free!
Cheers
Tim
Thanks for the info on this. I'm thinking about getting the same kit, can I ask what the sound quality is like through Bluetooth?
Update:
I've just had an MKi9200 fitted. Only had a couple of hours to play with it but so far I'm delighted.
Feel free to ask questions.
pjfriend said:
Update:
I've just had an MKi9200 fitted. Only had a couple of hours to play with it but so far I'm delighted.
Feel free to ask questions.
Click to expand...
Click to collapse
Does it work?
Yep, works really well.
Phone calls are very clear for both parties and (to me at least) the bluetooth music sound quality is really good. It's not a top of the line speaker system but it's clear and the volume is adequate.
It cuts in with the sat nav directions nicely. I had a bluetooth headunit before and if I had the phone connected the directions wouldn't interrupt a cd or radio. This works just fine, even if I'm listening to the radio through the stereo, the directions still come through.
I've not tried using the other sound connections yet, iPod, USB stick, aux jack or SD Card. I'll try them all over the next couple of days.
I'm thinking about taking the SD card out of the phone and using that way as it only lets you move the tracks foreward and backwards on a playlist or album if you use bluetooth. You have to use the phone to select another artist or album etc. Also, an SD card would let you see the album art and display the track details on the Parrot screen.
The only thing that isn't working correctly at present is that the remote won't skip tracks if the music player isn't displayed on the phone. If I have the sat nav screen up the track forward and backward keys are ignored.
I'm just going out to update the software though so this might fix that.
Anything else you need to know?
Right, I've updated the software which was really painless.
The sat nav stopping the track controls from working only happens in Co Pilot, not in Google Navigation.
I tried using my SD card from my phone in holder and it didn't seem to pick it up. I might need to leave it in longer (about 28 gig of music on it) or it might be that the card is too large at 32GB. The Parrot website says that there is no limit to card size but that sounds a bit optimistic to me.
Other than that though, I'm delighted so far.
I've got one of these too. Great bit of kit. I did notice a tweak in the VillainRom thread that ups the Bluetooth audio quality, if that's how you're using it. Haven't tried it yet myself.
One thing I have noticed is it's a bit hit and miss when play and pause work. I could never get into the car and press play, and just have it resume the last thing that was playing (usually BeyondPod). In the end I set Tasker up to automatically start playing when Bluetooth connects. Job done.
Sent from my GT-I9100 using XDA Premium App
dan13l said:
I've got one of these too. Great bit of kit. I did notice a tweak in the VillainRom thread that ups the Bluetooth audio quality, if that's how you're using it. Haven't tried it yet myself.
One thing I have noticed is it's a bit hit and miss when play and pause work. I could never get into the car and press play, and just have it resume the last thing that was playing (usually BeyondPod). In the end I set Tasker up to automatically start playing when Bluetooth connects. Job done.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Could you post a link to that thread? I have a Mki9200 myself and would be very interested to read this.
Sent from my GT-I9100 using Tapatalk
Have a look for a post by Faremoney on May 16th in the VillainRom thread over in the dev forum. It's to do with altering the Bluetooth bitpool. I'd link, but I don't think I can from the app.
Sent from my GT-I9100 using XDA Premium App
dan13l said:
Have a look for a post by Faremoney on May 16th in the VillainRom thread over in the dev forum. It's to do with altering the Bluetooth bitpool. I'd link, but I don't think I can from the app.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Thanks, I'll go searching for it.
Sent from my GT-I9100 using Tapatalk
The only annoyance I have now, which is more parrot related is that if I have a usb memory key and sd card connected, even if i had been.listening to music on the sd card, next time I get in the car and press play, it defaults back to the usb.
All in all, the kit is impressive. I bought mine about 18 months ago and gave nearly £300 fitted. A couple of months ago, I bought a kit for my girlfriend, brand new for £110 and fitted it myself in 40 mins!!
Definitely recommended.
Sent from my GT-I9100 using XDA App
Thanks for this post. It helped me to sync my contact from sgs2 to my parrot 9100.
It works very nice now!
Galaxy SII and Parrot MKi9100
Thanks for the fix - I was getting close to returning the unit - spent an hour or more listening to 'Voice Prompts'! Stick loaded with update and ready to go
Cheers
david
Ordered a second hand unit off ebay for 65 and getting it fitted late this week/early next week.
Has anyone figured out a way to charge the s2 from the iphone connector?
Hi there
Hope all ok with yours. I've been delighted with mine so far.
It does charge off the USB connector, don't need to use the iPhone end. It seems to deliver quite a small charge though so I still use a cigarette lighter socket.
From memory you can set the phone to storage mode and the Parrot kit will read the music contents of the phone but I had trouble with a larger capacity card. I'm happy with the audio quality over Bluetooth so this was the simplest way for me to work.
Let me know if that doesn't make sense or if you have any other questions.
Paul
Working but could be better...
Hi,
I have updated my MKi9200 Parrot software and set the "Force AT Sync". Effectively I don't have the phone voice commands anymore and it is already much better. Thank you for this.
However, I experience some interruptions of sound each time I use the phone (like just checking my mail) or each time an event occurs on the phone (like reception of an email notice or reception of SMS notice). It is not comfortable when listening to music...
Also, I had a much better experience with my Parrot and another phone than SG2. With SG2 + Parrot, sometimes you press the green button on Parrot and you don't get the voice command to dial, sometimes you have a phone ring and you can't take the call when pushing the green button on Parrot, sometimes you can't hang up after a call, sometimes it only works after several attempts of push on a given button.
Well, it is better than before but still not working as it should. Of course, when the Parrot buttons are not responding, I can still get the command right using the phone screen to take the call or hang-up but it is really not safe at all while ones drives his car in the same time...
Has anyone here found a solution first not to get those cuts on phone events?
Has anyone found a better setting to make sure the Parrot buttons are always working with SG2?
Has anyone experienced the same kind of troubles despite the "Force AT Sync" mode is set like on my SG2?
Thank you for sharing.
Thanks for confirming. much appreciated.
pjfriend said:
Hi there
Hope all ok with yours. I've been delighted with mine so far.
It does charge off the USB connector, don't need to use the iPhone end. It seems to deliver quite a small charge though so I still use a cigarette lighter socket.
From memory you can set the phone to storage mode and the Parrot kit will read the music contents of the phone but I had trouble with a larger capacity card. I'm happy with the audio quality over Bluetooth so this was the simplest way for me to work.
Let me know if that doesn't make sense or if you have any other questions.
Paul
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
I can't find how to get latest firmware from the parrot website
Your post was interesting but for the life of me I can't work out where to get a newer version of firmware! I have just put in the unit and was dismayed when I called Samsung and was told that I can't put my contacts in it! It seems that you have so I'd love to know where and how you got the firmware you refer to.
You can get it from here http://www.parrot.com/uk/support/downloads
Hi guys, just registered. I have a Samsung Galaxy S2 (with 2.3.5 KI3) and a Parrot LS-3400GPS carkit. It pairs without problems but of course it is a bit limited so I would like to change it with a Parrot MKi9200. I'm reading in many places there are a lot of issues with Android phones. I also wrote di Parrot and they do CONFIRM. But the problem (they say) is not in the carkit sw but in the Android! So strange...
On the parrot forum there are still users with mic issues, contact sync issues and voice command issues, even with the last 1.96 fw.
I've read here that everything works fine using "force at sync".
I understood that it does sync but what about the voice commands? Any problems?
Is there a conflict with the parrot ones?
I'm really confused
Thank You
Hey, the HTC Car A200 is a really cool gadget, but I cannot figure out how to make it output caller´s voice during phone calls. Any suggestions?
icc said:
Hey, the HTC Car A200 is a really cool gadget, but I cannot figure out how to make it output caller´s voice during phone calls. Any suggestions?
Click to expand...
Click to collapse
You simply can't!
It was made for music,video and Navigation only.
For full BT audio with voice calls you need the car kit which is 3x more expensive.
vegetaleb said:
You simply can't!
It was made for music,video and Navigation only.
For full BT audio with voice calls you need the car kit which is 3x more expensive.
Click to expand...
Click to collapse
and which one is that kit ? can you give me a link .... interested in the kit as well :
I would like to be able to stream music, make calls and listen to the sat nav. the car has no bluetooth has only line in, aux in!
Thank you !!!
vegetaleb said:
You simply can't!
It was made for music,video and Navigation only.
For full BT audio with voice calls you need the car kit which is 3x more expensive.
Click to expand...
Click to collapse
Can´t believe this... I am sure this is hackable. There must be a way.... We need somebody to fix this!
I'm not so worried about outputting caller's voice through the stereo clip, but what I am looking for may be related: When a text message comes in, it won't read out the message over the A200. It only does it over the phone's speakers, which is terrible. I can barely hear it. It's probably the same protocol as voice, so I'm chiming in here.
I'm assuming it's related to the fact the A200 only supports "Media Audio" and not "Phone Audio", because if I have my bluetooth headset on (which obviously supports "phone audio"), it will read out over that.
What would have been nice for HTC to develop with this thing is that all audio from the device goes through the A200 when connected.
HTC BT kit
unfortunately the HTC stereoclip only has to connections, if you look at the jack, it needs a third to be able to use call back etc., so it's more of a matter of the hardware than the software folks not much can be done about it....