Develop Bugs

MDA dead after upgrading to Radio 1.13

Hi guys
Tried to install the following upgrade:
MagicianRadio_1.13.00_maupgrade,
but failed miserably. MDA crashed completely. The only thing the display shows is the text "serial V1.00" or "USB V1.00" depending on the presence of a USB cable...
What can I do? The thing won't even reset, and I tried both soft and hard reset. Or is there another way to reset?
Will it help if I wait until the battery runs out?
Any help is very welcome!

Find someone ntrw'ing his ROM from SD to hard disk, send it to you and then you ntrw it back onto your SD and the reboot and "press power to flash"

Chatty said:
Find someone ntrw'ing his ROM from SD to hard disk, send it to you and then you ntrw it back onto your SD and the reboot and "press power to flash"
Click to expand...
Click to collapse
Thanks Chatty, but sorry, I don't understand "ntrw".
And are you saying that the MDA will boot from the ScanDisk Card? Like a bootdisk for a pc?
I have some more information now:
Every now and then this text "Serial" or "USB" disappears. When this happens and I switch on the MDA, it reboots, like when I first got it. But then without completing the boot, the screen switches to black again with the text "serial" or "USB".
I'd appreciate your help.

If you'd dare to use this board's search function you'd know by now that ntrw is a program to read/write SD cards on a low level.
And you don't boot from SD card - it just contains a ROM if you were following my 'guide'. The bootloader from your PDA is able to read that format and flash it´to your chips holding the ROM. Please do some reading first... it's stupid to write the same stuff over and over again.

You're right.
I use other forums and hate it when people do this. I'm actally quite surprised I do it myself now...
I suppose it feels like the most logical thing to do when something tries to help out: to ask the same person what it is s/he means. Doesn't make it right though.
Anyway, back to the point.
I got it to work in the end without any SD or whatever. I can't really put my finger to what went wrong at first, but it works now, so i'm glad.

Flashing hx4700 with a SDcard

Hi.
I´m new to this forum, but has been searching and reading some in this and other forums and whanted to try the new wm6_4700_release4. I cant use the sync/charging port, its broken. So read that it is possible to use a SD card to flash the ipaq, but i cant seem to get it to work, tried even och couple of computers, even with win98.
So if there is someone that could give me some guidence would be really helpfull.
Regards Jonny

Hi, you'll first need to get the rom on the SD card. I found a tool that does this called SD_IMG.rar. Once you have the image on the sd card follow these steps.
1) Power off the 4700 with the SD image card in the ipaq.
2) Put the Ipaq into BootLoader Mode. To do this press the Contacts + Mail + iTASK buttons at the same time and hold all of them. Then shortly press the Reset button on the bottom and release all of them. The screen with HP logo in the middle will appear having the bootloader version at the bottom and the text “Serial” on the top.
3) You will see as the ROM flashing starts – the percentage should be increasing (very slowly).
4) When complete Apply the hard-reset. To do this press and hold the Contacts + Mail and then shortly press the Reset button on the bottom and release all of them. Press Calender to confirm hard reset.
Happy Flashing!!

And the next question that comes up is.....were to find SD_IMG.rar then?
Ive found it some foreign speaking forum, that I couldn´t understand.
No advice how to use kozhura´s edition? or were to find SD_IMG.rar?
Thx for the reply

I have the sd_img progy, so if you can't find it PM me and i'll send it to you. As for the rom to use here's a thought... why not try kozhura´s. I thought that was what the point of all this.

MannyMania said:
I have the sd_img progy, so if you can't find it PM me and i'll send it to you. As for the rom to use here's a thought... why not try kozhura´s. I thought that was what the point of all this.
Click to expand...
Click to collapse
Hello, I've been following the hx4700 thread but haven't posted or written. I would love the SD_IMG.rar file if you could. I don't know if i need to leave my e-mail or not. Please help me out

Spanish version of Windows Mobile 6.0 to English (M88 Miphone)

I recently purchased two M88 Miphones from China (Windows Mobile 6.0 version). Both were supposed to be in English but when they were shipped to me, one was in English and the other Spanish. How can I change the language from Spanish to English? Or maybe I can install an entirely new English version of Windows Mobile 6.0? Can I extract the ROM from the English one and use it for the other (Spanish) one? Please help. Thanks.

It's great to find a way to install or restore the Windows on M88. My one just died. I haven't access to anything but the "phone" functions, so i need to restore it somehow from my PC. Some advices?

snakemountain said:
I recently purchased two M88 Miphones from China (Windows Mobile 6.0 version). Both were supposed to be in English but when they were shipped to me, one was in English and the other Spanish. How can I change the language from Spanish to English? Or maybe I can install an entirely new English version of Windows Mobile 6.0? Can I extract the ROM from the English one and use it for the other (Spanish) one? Please help. Thanks.
Click to expand...
Click to collapse
Hi, I think there is a way to change your Windows to English. I received the same phone with the same problem. I wrote to the supplier and they respond with the decision: they provided the original english WM6 ROM for M88 MiPhone on the website, so you can download it from here: http://rapidshare.com/files/168534489/DX.SKU16783.UPDATE.ENGLISH.AUG01.rar
But my problem is that I can't go in to the bootloader mode - just don't know how so to start loading the Windows OS. The instructions on the site are very poor and don't work. So I'm stuck again. Here there are the instructions:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
And some more instructions from my correspondence with the supplier, which shows different way of putting the phone in to the bootloader mode:
"we have a better idea to solve this inconvenience for you
we had updated a file on our website for you
you can download it and put it in your memory card to update the language into English.
you can put the file in the memory card no need to creat a folder for it
and insert the card into your cellphone
press the power bottom and the home bottom together
a few second later there would be a message on the screen shows you can press the home bottom again to restart the cellphone"
So maybe you can see they are showing different ways to enter the boot loader. Neidher 2 of them are working for me.
Since I have this phone I didn't find a way to enter the bootloader mode! I tried every combination between the keys but NOTHING! The only thing what I can do with the buttons is SWITCH OFF, SOFT RESET AND HARD RESET.
Please if somebody discover how to do that on that phone -M88 to share here with the rest of us!
Best of luck!

teddy_irish said:
Hi, I think there is a way to change your Windows to English. I received the same phone with the same problem. I wrote to the supplier and they respond with the decision: they provided the original english WM6 ROM for M88 MiPhone on the website, so you can download it from here: http://rapidshare.com/files/168534489/DX.SKU16783.UPDATE.ENGLISH.AUG01.rar
But my problem is that I can't go in to the bootloader mode - just don't know how so to start loading the Windows OS. The instructions on the site are very poor and don't work. So I'm stuck again. Here there are the instructions:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
And some more instructions from my correspondence with the supplier, which shows different way of putting the phone in to the bootloader mode:
"we have a better idea to solve this inconvenience for you
we had updated a file on our website for you
you can download it and put it in your memory card to update the language into English.
you can put the file in the memory card no need to creat a folder for it
and insert the card into your cellphone
press the power bottom and the home bottom together
a few second later there would be a message on the screen shows you can press the home bottom again to restart the cellphone"
So maybe you can see they are showing different ways to enter the boot loader. Neidher 2 of them are working for me.
Since I have this phone I didn't find a way to enter the bootloader mode! I tried every combination between the keys but NOTHING! The only thing what I can do with the buttons is SWITCH OFF, SOFT RESET AND HARD RESET.
Please if somebody discover how to do that on that phone -M88 to share here with the rest of us!
Best of luck!
Click to expand...
Click to collapse
Hi, I'm From Brazil
I'm selling this phone here in my country.
I think I've got same problem here. But I've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
But be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today I have one M88 "dead" in my hands because I did not followed all this procedure and after 35 minutes, by mystake I pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But I think using one of those "BOX" devices I will ressucitate it!

Thanks m8!
The thing is that when I press the 2 buttons at once I can only get blue screen for less than 1 second and after that Windows is loading. When it is done - the phone is after hard reset. I've tried hundreds of times - always the same. I can't get messages asking me to load software - only hard reset is the result. I've tried any other combination, including the reset buton under the cover, next to USB, but never managed to enter the service mode or boot mode or whatever it is.
One week I'm wasting my time in doing hundreds of attemts to enter the bootloader and nothing! How then do you make a hard reset on the M88?
Do you thing if I can use backup from english version of the same model that will change the situation - the spanish will be substituted by english? And if it's possible can you upload such a backup, made by Spb backup software for me, please?
Best regards

I have stupid problem. Some files disappeared, some programs stopped working and the entire system blocked. I made many soft and hard resets, which fixed the things... for a while. After one hour it's blocking again, without any settings, or interventions.
I downloaded the ROM, created a "root" folder in the card and unzipped everything there.
The thing is that it ROM-boot looks too fast - only couple of minutes. Can it be?

teddy_irish said:
Thanks m8!
The thing is that when I press the 2 buttons at once I can only get blue screen for less than 1 second and after that Windows is loading. When it is done - the phone is after hard reset. I've tried hundreds of times - always the same. I can't get messages asking me to load software - only hard reset is the result. I've tried any other combination, including the reset buton under the cover, next to USB, but never managed to enter the service mode or boot mode or whatever it is.
One week I'm wasting my time in doing hundreds of attemts to enter the bootloader and nothing! How then do you make a hard reset on the M88?
Do you thing if I can use backup from english version of the same model that will change the situation - the spanish will be substituted by english? And if it's possible can you upload such a backup, made by Spb backup software for me, please?
Best regards
Click to expand...
Click to collapse
I think I can do that,
but in one and half week because I'm still waiting for the flashing box and their cables.
Once I get I will upload it here.

ZEMONTI said:
I have stupid problem. Some files disappeared, some programs stopped working and the entire system blocked. I made many soft and hard resets, which fixed the things... for a while. After one hour it's blocking again, without any settings, or interventions.
I downloaded the ROM, created a "root" folder in the card and unzipped everything there.
The thing is that it ROM-boot looks too fast - only couple of minutes. Can it be?
Click to expand...
Click to collapse
Go ahead
But be pretty calm when performing update or you gonna get a bricked phone.

But is it possible that the update takes only few minutes? Or i'm doing only hard reset?

It is possible the update to take only few minutes
ZEMONTI said:
But is it possible that the update takes only few minutes? Or i'm doing only hard reset?
Click to expand...
Click to collapse
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards

teddy_irish said:
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
Click to expand...
Click to collapse
That's good news!
Yes It is!

How to install WM6 ROM - English version on M88 MiPhone from SD card
Please download the original ROM from here
I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart.
After the restart it will load the English OS on your M88
Enjoy

the mine is dead too.
stenatay said:
hi, i'm from brazil
i'm selling this phone here in my country.
I think i've got same problem here. But i've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
but be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today i have one m88 "dead" in my hands because i did not followed all this procedure and after 35 minutes, by mystake i pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But i think using one of those "box" devices i will ressucitate it!
Click to expand...
Click to collapse
i am passing through the same. What do you mean with box. I need to ressuciatate it
please.
[email protected]/ [email protected]
helllp

stenatay said:
hi, i'm from brazil
i'm selling this phone here in my country.
I think i've got same problem here. But i've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
but be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today i have one m88 "dead" in my hands because i did not followed all this procedure and after 35 minutes, by mystake i pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But i think using one of those "box" devices i will ressucitate it!
Click to expand...
Click to collapse
help me, the mine is dead.

how per-say?
teddy_irish said:
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
Click to expand...
Click to collapse
how persay did u get past the blue screen?

hello I am of chili and my m88 non reconose the card of cellular neither the icon of the cellular one needs urgent operative elsistema and the program and naturally like one makes before hand thank you

Hello every one,
I have this phone too, I trying to find any way or a cab to send the audio from the Fm radio app to the bluetooth headset, but no progrees, it only works with the original eraphones,
Any one have an a idea woh to do it?,
Regsards.
Javier.

jaguerra said:
Hello every one,
I have this phone too, I trying to find any way or a cab to send the audio from the Fm radio app to the bluetooth headset, but no progrees, it only works with the original eraphones,
Any one have an a idea woh to do it?,
Regsards.
Javier.
Click to expand...
Click to collapse
Me too. I was intending to lessen some audio-books.
Does it requires some additional software?

so how did it go and whats the name of the box i need one kinda kill my phone as well
please give info if u have it

M88 english bootloader
Here is the fix, sponsored by wirelessandmorestore.com
Copy both of these files to your computer.
http://uploading.com/files/YE6JJ36Y/update.img.html
http://uploading.com/files/TA1N0MBA/uploader.img.html
Plug in your phone and copy them to the SD card.
Turn the phone off.
Press the button on the top and the round button on the face at the same time and continue to hold it. As you are holding it, the phone will turn and go thorugh a couple steps before it says something like 'downloading image' or 'updating image' something like that.
Once it gets to that screen, you can let go of the buttons and the phone will update and reboot. This will take a couple of minutes. It will be in English when it turns itself back on and loads Windows.

Original English WM 6.0 ROM for M88 MiPhone available for download!

English OS System 20080801 Edition (ROM image) for M88 MiPhone
Please download from here
If somebody knows how to enter the bootloader mode of this phone please share here with us!
Here is the instruction for this procedure from the supplier which is nor working for me:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
If somebody can manage to install the ROM please write here the steps!
Thanks!

You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.

Problem Fixed!
GnatGoSplat said:
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Click to expand...
Click to collapse
Thanks for your help, m8. It didn't work that way for me. I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart. After the restart - voila! There was the English OS loaded on my phone and everything was working perfect!
Hope this to help to other people too!

Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".

Check this out:
ZEMONTI said:
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Click to expand...
Click to collapse
Check this out:
Resco explorer
Pocket Mechanic
Pocket Toolman
Resco is very useful thing so the other two are very powerful as well. You will definetely uninstall S2U2 with more than one of them.
Good luck!

Hi, is it existing a French release of this rom for M88 or can you help me for translate it ? Cordialy
Sorry for my english very bad...

MMS works in this rom?

MMS works only with Arcsoft_MMS_Composer_v5.0.31.16
bye
Mark

i have aquestion... : I was screwing around with the m88 phone and put in the original rom in (I've done this many times) but this time i forgot to use the other three files .img and ... i only had the update.img in the card... then when i tried flahing it , it was reading but the battery fell out and now it wont turn on.... any ideas on how i can fix this... ???? I really need the help please!!! If it is possible to fix this.

helppp
I need help i was updating mi os , but it takes more than a half of hour , and now it wont turn on again how can i fix that? thanks?!

problems
i have a daxian +999
i flash it whit that file it work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??

My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.

problems in m89
hello, I recently bought a M89.
In general the phone is great, but mine has a very big problem.
As a PDA it works great, but when I insert my SIM card the phone just freezes. It works for just a minute after the SIM is inserted. I've even been able to make one or two calls before it freezes.
But past one or two minutes it just stops working. It doesn't respond to anything at all, the only solution is to remove the battery.
I think the problem is in the firmware. I've reinstalled a bunch of diferent firmwares: wm6 english, wm6.1 spanish, wm6 english again... and nothing works.
can anyone help me???, 'cause this is really killing me :'(
Thanks in advance!

oic0 said:
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
Click to expand...
Click to collapse
Just wondering - What is the size of your microSD card.
As far as I know m88 does not support SD card greater that 4 Gb by default.
Please, let us know.

Updated from SD Card ?
Hello, first of all I want to say thank you because I learned a lot from this thread. I bought M88 phone some months ago and is the first time I cannot use ( I really don't know what went wrong but finally the phone is not working or frezze ).
I bought 2Gb card and was formatted in FAT32. I also complete all steps in order to load the original image but I got this message: "updated from SD card?" and nothing more... What button must be pressed ?
I'll go crazy... do you know what's the next step ?
Thank you very much.

i dont understand sorry. i have to copy the "update" imgfile and rename it as "uploader"... and leave this two files : "update and uploader" in the root folder ?

I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!

bootloading
the file, atleast on windows 7, shows up as "update". Also, I found it works must faster and easier to make 3 copies (4 files total)
naming 1: update.img
2: uploader.img
3: Update
and 4: uploader
(so the last 2 don't actual have .img in the title)
Then just make sure you hold down both the buttons, and vuo-la! haha
Doesn't fix the MMS problem though.
Does anyone know how to make it so that it can use mms?

Miphon m88
Danke es funktioniert supper !!

i got white screen too ;[ how to fix my phone now ;/ i dont see enythink ;[

Help: Kaiser can't flash NBH anymore!

Following the instrcutions tp flash back to WM:rename RUU_Signed.nbh to KAISimg.nbh and place it on your SD card along with KAISDIAG.NBH. Place the SD into your Kaiser and hold the Power button and camera button down, then take your stylus and hit the reset button.", after I pressed the power button again, tri-color screen changed to a whie screen with "Loading..." showing. There was no progress bar below as usual. After about 5 minutes, I reset it, Kaiser runs android system well: I can even install a new anroid system. Just can't flash any NBH file, even Android small NBH file. Tried with a newly formarted fat32 card also. It always stop at "Loading.. " screen.
Anyboby can help me?

alwayssomewhere said:
Following the instrcutions tp flash back to WM:rename RUU_Signed.nbh to KAISimg.nbh and place it on your SD card along with KAISDIAG.NBH. Place the SD into your Kaiser and hold the Power button and camera button down, then take your stylus and hit the reset button.", after I pressed the power button again, tri-color screen changed to a whie screen with "Loading..." showing. There was no progress bar below as usual. After about 5 minutes, I reset it, Kaiser runs android system well: I can even install a new anroid system. Just can't flash any NBH file, even Android small NBH file. Tried with a newly formarted fat32 card also. It always stop at "Loading.. " screen.
Anyboby can help me?
Click to expand...
Click to collapse
1st
I have never used the stylus reset to flash nbh. (good thing too because I broke it long before switching to android)
just holding the camera button while powering on gets me to the tri-color and then a white screen telling to press power button again to flash.
2nd
I have had freeze-ups on that screen while "loading" and it is usually because of a bad/corrupt nbh file or not making sure all caps in file name KAISIMG.NBH
just a thought...

mnjm9b said:
1st
I have never used the stylus reset to flash nbh. (good thing too because I broke it long before switching to android)
just holding the camera button while powering on gets me to the tri-color and then a white screen telling to press power button again to flash.
2nd
I have had freeze-ups on that screen while "loading" and it is usually because of a bad/corrupt nbh file or not making sure all caps in file name KAISIMG.NBH
just a thought...
Click to expand...
Click to collapse
Tried with KAISIMG.NBH, nothing different!
Anyway, Thanks!

Try clearing everything on the sdcard and leaving only the KAISIMG.nbh and remove the diag file too.
You should have one file (KAISIMG.nbh) on your sd.
NOTE: If the phone is off you only need to hold the camera and press the power button. If the phone is on just hold the camera and press the reset button. There's no need to hold the reset AND power button.

Since you can access the bootloader there is another way to flash, by USB.
You will need to do a little preparation.
If using XP disable Activesync by going to connection settings and uncheck 'Allow USB Connection'.
Then make a temporary folder somewhere handy, I usually use c:\flashtmp, but anything is good.
In this folder goes KaiserCustomRUU.exe, and the NBH renamed to RUU_Signed.NBH.
Once you have all this, put kaiser in Bootloader, it should say Serial at the bottom, attach the USB Lead, and wait until it say USB at the bottom, then run KaiserCustomRUU.exe and follow the instructions.
You should be able to flash Radio, splash, or OS with this method.

i usually do it the way zenity describes...its easier for me to keep up with all of my nbh
the few times i did it from SD i DID NOT have kaisdiag.nbh...other threads said it was unnecessary, so maybe its even bad
btw everyone i found that KaiserCustomRUU.exe will take a nbh named anything as long as its the only one in the DIR. found this by forget full accident

One thing zenity forgot to mention was that you need to remove kaisimg.nbh from your sd before putting into bootloader. Or just remove your sd

loserskater said:
One thing zenity forgot to mention was that you need to remove kaisimg.nbh from your sd before putting into bootloader. Or just remove your sd
Click to expand...
Click to collapse
you can techically leave it there. in spl there is the option to not load the .nbh...after selecting that you can plug in USB like normal

Ah yes, I did forget the removal of the SD card, it may not be necessary in this case, but generally it's a better practice, saves confusion.
Didn't know about customRUU accepting any NBH though, always good to learn things
Regarding KAISdiag, I have never used it, so leaving it out is safe, in fact I'd only use it as a last resort for bad flashes or problems that require it.

zenity said:
Since you can access the bootloader there is another way to flash, by USB.
You will need to do a little preparation.
If using XP disable Activesync by going to connection settings and uncheck 'Allow USB Connection'.
Then make a temporary folder somewhere handy, I usually use c:\flashtmp, but anything is good.
In this folder goes KaiserCustomRUU.exe, and the NBH renamed to RUU_Signed.NBH.
Once you have all this, put kaiser in Bootloader, it should say Serial at the bottom, attach the USB Lead, and wait until it say USB at the bottom, then run KaiserCustomRUU.exe and follow the instructions.
You should be able to flash Radio, splash, or OS with this method.
Click to expand...
Click to collapse
Tried as your instruction with SD card and SIM card removed, when going to step to run KaiserCusomruu.exe, there is always a "communication error showed on PC screen, and recovery didn't make any difference.
I noticed that my SPL is SPL-3.34.0000, instead of SPL-3.34.0000. May it is beacause I flashed stock rom befored. How can I flash Hardspl in android system. I don't know how to copy jumpspl.exe to kaiser in android system.

You should be able to flash a stock winmo rom using the above method, since stock does not need HardSPL.
Sent from my HTC Kaiser using Tapatalk

zenity said:
You should be able to flash a stock winmo rom using the above method, since stock does not need HardSPL.
Sent from my HTC Kaiser using Tapatalk
Click to expand...
Click to collapse
Thank you for your help!
I downloaded the stock rom for my kaiser, and finally I flash back to WM following your instruction. Before, I tried a wrong stock rom.
By the way, the battery problem has been solved for Android system? I have 2 pcs of battery.