Related
I have installed the latest Intent Midlet Manager available Here on my Universal with the latest Helmi_C WM6 Rom (v1.1).
But i get very small font sizes
Tried searching here but could not get a Fix
Anybody know how to fix this
the midlet manager seems to be for the wizard and not for universal. maybe it went wrong there....
do a hard reset and it should be normal.
is there a version (v.11) available for Universal.
Cause the default version cannot run the GMail app ?
I have soft reset it but does not work (a hard reset would remove the app)
pshetty said:
I have installed the latest Intent Midlet Manager available Here on my Universal with the latest Helmi_C WM6 Rom (v1.1).
But i get very small font sizes
Tried searching here but could not get a Fix
Anybody know how to fix this
Click to expand...
Click to collapse
You can add this key to fix.
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tao\intent\conf\sys\ui\midp\vnd\font]
"stringfont"="andale,24"
"size"="24"
"labelfont"="andale,24,bold"
"alttextfont"="monotype.com,24"
Quote: Posted by pshetty: But i get very small font sizes Tried searching here but could not get a Fix Anybody know how to fix this :confused
There is a switch in the software. Open Midlet, open Gmail app:
Select... Menu < Goto < Settings
The "use small fonts" switch is enabled by default. Uncheck this, save, close the app and restart:
Font is still small but useable on Universal.
Excellent product if you need to access gmail wirelessly.
nncuong said:
You can add this key to fix.
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tao\intent\conf\sys\ui\midp\vnd\font]
"stringfont"="andale,24"
"size"="24"
"labelfont"="andale,24,bold"
"alttextfont"="monotype.com,24"
Click to expand...
Click to collapse
Works Great ..... Thanks
pshetty said:
Works Great ..... Thanks
Click to expand...
Click to collapse
Thanks for the advice, however when I open the registry, the registry only up to [HKEY_LOCAL_MACHINE\SOFTWARE\Tao\intent\
then there's no further folder. Why's that?! Thanks!
tonyfung820 said:
Thanks for the advice, however when I open the registry, the registry only up to [HKEY_LOCAL_MACHINE\SOFTWARE\Tao\intent\
then there's no further folder. Why's that?! Thanks!
Click to expand...
Click to collapse
With your registry editor you have to add each of the folders mentioned in the post up to FONT, then you have to put in the four strings recommended into the FONT folder.
Hep. Have been looking around the forum to find a way to change the keyboard layout (Hardware), to Danish.
I simply cant make it work. I have the Live 0.2 rom, and have tried the reg. editing as written in the forum..but no go.
Can someone please give a guide to which rom that I can use if I want a Danish Keyboard - or can someone do anything about the Keyboard issues. (Make some kind of a cab or??) I cannot do it myself, but would really be thankfull.
And - great thing with all this rom biz. I know nothing about it - but loves to jazz up my phone...hehehe
Greatings from Viking Land
Isnt that avalible in the extrom?
stinger32 said:
Isnt that avalible in the extrom?
Click to expand...
Click to collapse
I dont know??
I'm using LVSW version and somehow every softreset reverts \oem\qwerty registry back to uk mapping, manual edit and/or nordic keymapping.cab is useless, it have to be something with LVSW version, because xda live was working with nordic cab...
kha said:
I'm using LVSW version and somehow every softreset reverts \oem\qwerty registry back to uk mapping, manual edit and/or nordic keymapping.cab is useless, it have to be something with LVSW version, because xda live was working with nordic cab...
Click to expand...
Click to collapse
I have tried to change the registry, but i does not seem to do anything for me. I wonder if the settings somehow can be extracted from wm5?
Look at this post Norwegian Keyboard on WM 6?, it has the cab file for the keyboard attached, this is used for all nordic tytn.
I've just installed xdalive keyboard fix cab-> softreset -> nordic keymap cab -> softreset and now the mapping is correct!
kha said:
I've just installed xdalive keyboard fix cab-> softreset -> nordic keymap cab -> softreset and now the mapping is correct!
Click to expand...
Click to collapse
HAHAHAAAAA - its working. Yaaahuuuuuuu. Lets get som ROMs.... I cannot tell you how glad this made me..
TyTn Rules - The King Of Phones
Go Chefs, Go - lets get som roooommmmsss
Where can I download xdalive keyboard fix cab and nordic keymap cab?
callahan said:
Where can I download xdalive keyboard fix cab and nordic keymap cab?
Click to expand...
Click to collapse
I am wondering the same thing, have tried to search the forum with no luck
are there some who got the xdalive keyboard fix cab and nordic keymap cab?
when you guys find all the solutions to the mapping add them to the wiki, or pm me the list of fixes all nice and neat and i will put them on there
This works on XDA-Live & Black (at least)
Here's the one I use and it works on most of them anyways. Remember to soft reset afterwards.
Whenever I flash a new ROM or do a hard reset I just change the following ONE registry setting.
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
"Layout"=132116
Why not make a fix_my_qwerty_mapping.reg file and save this on your storage card, content like this (I have no idea how to make a .cab file, but this works fine for me):
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty\]
"Layout"=dword:20414
This is the Norwegian settings, but it doesn't matter for Finnish, Swedish and Danish users - it's all the same mapping. I got a TyTN/Herm 200 and for all I know this could be firmware dependent.
The number "132116" is decimal and found by:
20+countrycode, country code for Norway: 0414. That will be 20414. Converting this hex to dec gives 132116.
(When using the .reg file it writes in hex and therefore 20414, but you can manually enter the number directly into the register using hex if you like.)
Country codes:
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
Remember to power down/up after applying this registry change - not just a stylus soft reset.
shadoefrizon said:
Here's the one I use and it works on most of them anyways. Remember to soft reset afterwards.
Click to expand...
Click to collapse
Thanks man it worked on my HTC TyTn. No im typing in swedish
How do i get the æøå maped to a key so i don't need to go in to sym?
Shauge said:
How do i get the æøå maped to a key so i don't need to go in to sym?
Click to expand...
Click to collapse
You have of course searched, found og tried:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
"Layout"="132116"
So then I dont know....
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
after running the cab file in this forum my h button is now a + when i am in contackts searching for a person?
Hi fellow Scandinavians.
Try these attached files.
They work perfectly in both WM5 and WM6.
Both should be installed on the device at the same time.
thx Torben schould i do a reset first now that the other things are ****ed up?
and how will i get the æøå maped to a key?
Hi All,
First of all, credit goes to the original ROM author - jasjamming
Based on the Black v3.0.1, I have changed the following:
- Remove English SIPs (Letter Recognizer, Block Recognizer etc).
- Set Keyboard SIP as default.
- Included Windows CHT IME (M$ Phonetic & Chajei).
- Included Windows CHS IME (M$ PinYin).
- Included Windows JPN IME (M$ Kana & Romaji).
- Included PIM Backup v1.9.0.0
- Added CommManagerVibrateFix.
- Applied WM VI Black Update BT Drivers.cab.
- Added mingliu font, change wince.nls for Chinese/Japanese/Korean support (Korean need proper fonts).
- Added ClearTemp v0.9.2.4.
- Enabled NITZ time sync by default.
- HTC X-Button/Task Manager updated to v1.5.
- Replaced IA_Zip with PocketRAR v3.6 (freeware)
- Added VistaHide Battery Bar.
- Added SIP_CHT, SIP_CHS, SIP_JPN cab files for change SIPs (located in \Windows\)
- Replaced built-in MobileCalculator to Eval.
- Upgraded Office to 2007 version. (support docx, xlsx, pptx etc)
I've also included 3 cab file in the \Windows folder -- SIP_CHT.cab SIP_CHS.cab SIP_JPN.cab
Please remember to install one of the cab file to enable the inputs (soft reset after installation), otherwise only english input is available.
For additional programs (eg, VOIP, MSN Messenger), please visit the original black thread.
For chinese description or screenshots, please visit:
http://blog.yam.com/leo2016/article/10104618
Download:
http://www.sharebig.com/d/spxowmtll/0t9cFGM464C682B0E/Black_v3.0.1-CCS.zip.htm
(password: [email protected])
or
http://www.megaupload.com/?d=OAF20XT6
great thanks
looking forward to try this one out! thanks!
Thanks a lot for this new rom release
Any Traditional Chinese Handwrite Input function?
Thanks
As Ricky said, i would also like to thank jasjamming first...
now..
THANK YOU THANK YOU THANK YOU Ricky. Your solution is the only one that works stably for reading chinese... again, thank you very much!
Hi Ricky
I just installed the rom, and I notice that the font size is funny. The default size for the menu item does not change even if i change it in the screen adjustment screen (Settings-> system -> Screen). This does not happen with your old rom...
Thanks!
Slider
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
X01HT Installed and Working Well!
Well done Ricky, awesome job. I found the Japanese input pretty painful, as it didn't have the correct romaji option, instead the layout for a true Japanese keyboard, which the X01HT doesn't have.
I used Asukal's one (tried to upload, but no go) and that is exactly as it should be. You might look at replacing your's with that one.
I will let you know how it goes as I run it through its paces, but its looking impressive so far.
Now where's the Black 3.5 version
Thanks, got it!!
Sorry, got it, thanks
thanks to you and the original rom chef jj. would like to know is 簡易 input method included?
RickyLan said:
HKFreak:
Sorry that I did not include any of the handwriting software this time, I was trying to create a cab file for the Handwriting, however, everytime I installed the cab file I made the touchscreen would stop function (need to use hard reset to fix).
I'll find a solution later on... (oh well... maybe it's time to try 3rd party inputs )
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Mind if you post the cab file here? I need the CHT hand writing indeeded!!!~
RickyLan said:
Slider5354:
Hi, I realised this problem too, it is due to a reg key for chinese to enable "line break" (not sure if you have seen this problem on the previous version or not), if you use PIE to visit chinese/japanese websites, the text would not break into lines properly.
Once I added change the reg key the line break problem solved.
what you can do is change the reg key back to english one, use the RegEdit problem in System, find the key called "SystemLCID", change the value from 404 to 409 and do a soft reset, should fix your problem
Click to expand...
Click to collapse
Thanks Ricky.. I notice text break problem too, and this happens even with regular English rom + CE-Star.. so I guess we can only choose no line breaks, or weird font size... :-\
I've been runing the ROM ever since it went up and haven't had to do a reset yet, whereas with the straight Black 3.01 with the hacks to get it using Japanese, I found myself resetting 5 or more times a day.
Thanks for a great stable release!
Is this rom built up from black 3.0 insted of 3.01?????
I found the Black 3.0 bug still on this ROM....
1) today theme cannot be changed(only Top/Under Bar can be changed)
2) symbol pad cannot be loaded.
how to use korean
I want use korea.
how can i use korea language.
The Voice Command button also disabled. Any idea how to enable it?
And is it possible to set the default input from '拼' to English? (For both keyboard and soft keypad) Thanks!
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
flashed this no prob. used it to replace 3des + CE Star, which was a very unstable combination.
this is working great. fine job Ricky, and also to whoever did black. Nice ROM. I love my phone again.
anyone know where there is a manual on the input methods. they take some getting used to after CEStar, a manual would help.
hamster0914 said:
Ricky, can you post the Japanese SIP cab file on its own?
I'm trying to muck around with Black 3.5. and the Asukal one I've been using up until now doesn't want to work properly.
Click to expand...
Click to collapse
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Yes. All versions > 2.5 seemed not support SIP switching.
I guess some REGISTRY changed.
I switched to LVSW two weeks ago.
It works great!
Cedricguo said:
Really , just can't enable kansaku & tegaki. On 3.5 & all the new released roms.
Click to expand...
Click to collapse
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Tried but did not work
Hello there,
I installed the Cab (install to: device) on my unlocked X02HT with dopod rom.
Turned the device off and on again but no change.
I am using FuseSP and PocketDOS and still both have this annoying numeric keyboard problem
Or does this hack only fix the Yahoo Go and WLS issues?
On my HTC S630 it fixed the problem I had with Yahoo Go, I really don't know if this fixes other apps (this should fix the input problems in the textboxes in .Net bassed apps, but I haven't tried any other) and if this works with other ROMs apart from HTC's one, I guess is just a matter of testing it.
The instructions that I have from that forum are:
- copy the .cab to your phone
- run the .cab with File Explorer to install it
- restart your phone (or shut it off, then turn it back on)
- it should work after that
It worked!
Hi,
I am using softbank X02HT with Dopod C730 ROM. This fixed the input bug with Yahoo! Go.
Thank you so much for this fix! I'm always grateful to smart ppl that come up with things like this!
Yus
does not work somehow on my x02ht dopod rom
as mentioned before i tried it with my x02ht with dopod rom. i did not try it with yahoo go but with other apps i had this numeric key problem with and there was no change...
funny thing is i can install the .cab file as often as I want to. It looks like it installs fine. And then just for fun if I click the cab again after reboot it installs it again. It does not tell me it is already installed even after installing it for the x-time. Is this normal? I tried to installl to device and storage card. no change.
Cheers
xsl777 said:
Here is the Fix for the .Net textbox input issue present in the HTC S630 that affects WLS and Yahoo Go !!!
Soft reset after installing the .cab
Thanks to Vertigo1md1032 at http://www.howardforums.com/showthread.php?postid=10489722#post10489722
Click to expand...
Click to collapse
It runs on my dopod c730.
How about Gmail mobile? I can input my username there...
anybody can help?
Worked like a glove! Solved problem of the apps that treats letters as shortcurts and dont write!
Thanks a lot
need yahoo go for c730
i need yahoo go for cavalier, is there any link to download this ?
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
gimbong said:
do you really have yahoo go installed on your cavalier ?
where is the link to download ?
i always failed when im trying to install it, always unsuccessfull.
please help me
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=432946 and read how to app unlock your device.
Also these would be very helpful http://forum.xda-developers.com/forumdisplay.php?f=415&nojs=1#goto_forumsearch, http://forum.xda-developers.com/showthread.php?t=298893
Cheers
has anybody been able to get the Japanese KeyTouch SIP working on their Rhodium? i'm on an Asian WWE ROM and it's a no go for me. i've heard some people have gotten it working on theirs. can you please share what ROM it's working on and maybe how you got it working?
the program i'm referring to is included in Zgembo's Japanese Advanced IME
<<RESERVED>>
just because...
close but still no cigar.
i can get KeyTouch and emoji working temporarily on my Rhodium. On a fresh install, I first install Softbank MMS, then LetsJapan6 then restart.
After I restart, I install the Advanced IME but no restart after that.
If I do it that way, I can open up Softbank MMS and both English and Japanese prediction work, japanese input works, emoji works, and Japanese keytouch works. only english keypad is doesn't work correctly (outputs numbers only).
but this is temporary. after installing Enable_IME and restarting the system, none of the keyboards work properly anymore.
any help would be kindly appreciated.
i've finally gotten Keytouch working on my Rhodium! but I'm still running into a snag.
when the KeyTouch cab is installed, two of the registry changes it makes are:
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409 > Ime File = compime.dll
HKLM\System\CurrentControlSet\Control\Layouts\e0010411 > Ime File = M5ImeMgr.dll
however, after a soft reset, the e0010411 value doesn't stay M5ImeMgr.dll. Rather, after a soft reset, it changes to compime.dll.
it seems like a rather simple issue to resolve. after my rhodium boots up, i input "M5ImeMgr.dll" manually, but so far everytime i reset, it goes right back to "compime.dll". any suggestions?
further research has shown that the e0010411 is simply mimicking whatever values are entered for e0010409. does anyone have any idea why? how can i make these two have separate IMEs?
seems either no one cared, or no one else in japan with a touch pro 2 had this problem, but i think i've finally found a solution. in my previous post, i mentioned that after a soft reset, the e0010411 value doesn't stay M5ImeMgr.dll, but that instead, it changes to whatever value is in Ime File is entered for e0010409. the simple solution (although i don't fully know its ramifications yet) is to just delete the Ime File value of e0010409 altogether. once i deleted that, my "Ime File = M5ImeMgr.dll" value of e0010411 no longer changes with a soft reset.
i hope this will be useful to others in the future... feel free to post any questions in here
did the softbank version come with a qrcode reader and stuff like that? can i flash my sprint cdma with the softbank firmware and somehow get it working on sprint with japanese cell phone features? can it work with the pay by your cellphone feature on japanese trains? or vending machenes??
Now, that WOULD be a cool feature, if anybody knows. I have never heard of this feature on WM phones in Japan. Torou, did you find anything?
not really. and ワ is wa torowa
Ive been using the cab from this thread on my TP2 and it works just fine:
http://forum.xda-developers.com/showthread.php?t=445550
Is this what you're looking to do?