Related
Fasten seat belts and prepare to catch WM6 for HTC Artemis
Here is Official(not hand made) Artemis WM6 OS dump!!!
Please do not ask me about anything!
I will not comment anything.
http://uploaded.de/?id=5g88lr - ROM ver 1.38
http://uploaded.de/?id=f1zt2f - flasher for SuperCID devices only
http://uploaded.de/?id=2qok1e - Artemis Another WM6 Rom ver 3.5 - not coocked - for SuperCID devices only
All in you hands!
Enjoy!
Well aren't you just a little treasure trove.
Have you looked at this Tupisdin?
Comments on this vs. home made ROMs, any applications installed?
Media Hub etc?
I do not know! I do not have device right now on hand.
I will upload SUPERCID flasher later.
From where did you get hold of this?
Asking questions although he said he would not answer them. Interesting....
I am curious to see the review from the first brave soul willing to try this out. It does seem peculiar that the phone image on the RUU is not the Artemis.
itschase said:
Asking questions although he said he would not answer them. Interesting....
Click to expand...
Click to collapse
Ha, Good point, but I did take that to mean 'don't ask how I got it' more than don't ask any questions.
Gajet said:
Ha, Good point, but I did take that to mean 'don't ask how I got it' more than don't ask any questions.
Click to expand...
Click to collapse
No, that wasn't to you, the guy who blatantly asked...where did you get this.
BTW - I flashed USPL to my phone, tried the RUU version of this update and it said the file is corrupt. I take that to mean the file is not meant for my phone. The first of the two downloads has a file called OS.nb. That must be where I need to focus my attention. I will update if there is anything new....
Am I being super dumb, all I see is one download of a rar file containing os.nb0
What's the RUU version you speak of?
(EDIT) Irrelevant post now original has been updated and post below, although I still not sure what you were looking at, at the time itschase.
Flasher for supercid devices is here.
http://uploaded.de/?id=f1zt2f
The second of the two links contained the RUU...unless the upload site gave me the wrong file....
I am about to try an experimental re-flash...I will post results.
what language is this?
itschase said:
The second of the two links contained the RUU...unless the upload site gave me the wrong file....
I am about to try an experimental re-flash...I will post results.
Click to expand...
Click to collapse
Guess I am the retard, because I tried using the os.nb0 file with several different RUU's and none of them could open the file. I changed the extension to .nb and .nbh just for good measure with no luck.
Works...
tupisdin said:
Here is Official(not hand made) Artemis WM6 OS dump!!!
Please do not ask me about anything!
I will not comment anything.
http://uploaded.de/?id=5g88lr - ROM ver 1.38
http://uploaded.de/?id=f1zt2f - flasher for SuperCID devices only
All in you hands!
Enjoy!
Click to expand...
Click to collapse
Hi all just to let you all know tested this rom and all ok on my sim free (expansys) P3300.
I tried the "PDAVIET_Black&Blue_v3_WWE_Full" first-this was ok but phone would not switch on today, so i was thinking og going back to bepe's wm6 and saw this rom.
I used Artemis_USPL first, then the ROMUpdateUtility.exe supplied in the ARTE_WM6_FLASHER download quoted here (flasher for SuperCID devices only).
My details from device are now as below.
Rom version: 1.38.0.0 WWE
Rom date: 02/15/07
Radio version: 02.93.90
Protocol version: 4.1.13.42
There are not ext rom applications loaded with the ARTE_WM6_FLASHER (2nd link), and not alot installed in wm6, but my memory shows 47.89 free storage and 25.61 free program space.
Keep up the good work XDA....
tupisdin said:
Fasten seat belts and prepare to catch WM6 for HTC Artemis
Click to expand...
Click to collapse
Are we going to have wm6 for the prophrt ?
gadjet said:
Hi all just to let you all know tested this rom and all ok on my sim free (expansys) P3300.
I tried the "PDAVIET_Black&Blue_v3_WWE_Full" first-this was ok but phone would not switch on today, so i was thinking og going back to bepe's wm6 and saw this rom.
I used Artemis_USPL first, then the ROMUpdateUtility.exe supplied in the ARTE_WM6_FLASHER download quoted here (flasher for SuperCID devices only).
My details from device are now as below.
Rom version: 1.38.0.0 WWE
Rom date: 02/15/07
Radio version: 02.93.90
Protocol version: 4.1.13.42
There are not ext rom applications loaded with the ARTE_WM6_FLASHER (2nd link), and not alot installed in wm6, but my memory shows 47.89 free storage and 25.61 free program space.
Keep up the good work XDA....
Click to expand...
Click to collapse
When my p3300 starts the below info is displayed.
IPL 3.04.0001
SPL 1.11.0000
GSM 02.93.90
OS 1.38.0.0
I still have the htc start up wallpaper from the "PDAVIET_Black&Blue_v3_WWE_Full" rom , so will reflash original p3300 rom (ART_HTCWWE_11240501_026790_WWE_Ship), then run above again.
Will let you know outcome, fingers crossed...
Core WM6 with no radio update or EXT Rom applications.
gadjet said:
When my p3300 starts the below info is displayed.
IPL 3.04.0001
SPL 1.11.0000
GSM 02.93.90
OS 1.38.0.0
I still have the htc start up wallpaper from the "PDAVIET_Black&Blue_v3_WWE_Full" rom , so will reflash original p3300 rom (ART_HTCWWE_11240501_026790_WWE_Ship), then run above again.
Will let you know outcome, fingers crossed...
Click to expand...
Click to collapse
Wallpaper back to normal now..
Startup screen now shows:
IPL 1.12.0001
SPL 1.11.0000
GSM 02.67.90
OS 1.38.0.0
Still no ext rom loading or any apps, but wm6 ok free memory same (47.89 storage-26.24 program).
anyone able to post screenshots of the various pages, memory info and device info.
Anyone able to comment on how it compares to bepes rom.
Works now re-modified to include basic rom applications
dannyoneill said:
anyone able to post screenshots of the various pages, memory info and device info.
Anyone able to comment on how it compares to bepes rom.
Click to expand...
Click to collapse
After testing this rom I would advise everyone to use the version ARTE_WM6_3_5, the first release v3 looks like a cut down version of wm6.
The reason its fast is that loads of programs etc removed, no quickgps, no bluetooth explorer etc... also new radio stack is old version to?
Re flashing version 3.5 now which includes the missing apps.
gadjet said:
After testing this rom I would advise everyone steer clear of it, its a shame but looks like a cut down version of wm6.
The reason its fast is that loads of programs etc removed, no quickgps, no bluetooth explorer etc... also new radio stack is old version to?
Re flashing bepe rom now
Click to expand...
Click to collapse
This Rom OS only.Applications in this Rom not new but verry nice OS.May be i will Rebuild OS in v3 B&B in next week...!
i have UK Orange M700,
i have flashed successfully twice using SSPL with LVSW & mUn 2.00.S.E!
is it possible to flash to official WM6 using SSPL? like i have already done
Was creating a new thread REALLY necessary? When there's at least 2-3 others about this...
darkjedi said:
Was creating a new thread REALLY necessary? When there's at least 2-3 others about this...
Click to expand...
Click to collapse
But the only answers seem to be "flash HardSPL" & official WM5 rom, which i dont have being on Orange M700!
i want to be able to flash using SSPL straight from 1 cooked Rom to another.
p.s. i'll make sure i P.M. you before i start another thread!
goodie said:
is it possible to flash to official WM6 using SSPL?
Click to expand...
Click to collapse
No it isn't, here's the answer:
The "official" WM6 rom NBH file has the OS part tagged as 0x401 (256Mb NAND) instead of 0x400 (128Mb NAND). Only the new SPL-3.03 included in this "official" upgrade is able to understand 0x401, so SSPL, HardSPL or CrashProof SPL or whatever that's not based on this SPL-3.03 (or newer) will not be able to understand the NBH header type 0x401 and will stop at OS flashing.
The solution is simple:
Unpack the NBH and repack it tagging OS as 0x400, then flash it using SSPL, or whatever hacked SPL choice we have.
i've never tried unpacking an NBH or retagging!
is this something the knowledgeable cooks on here will manage easily?
one moment and I'll post a safe and re-tagged file for all.
Shadowmite said:
one moment and I'll post a safe and re-tagged file for all.
Click to expand...
Click to collapse
thanks, i appreciate the offer, but i think i will wait for a cooked Rom with HTC homeplug, audiomanager & no slow down?
apparently the only way to get HTC apps with no slow down is to have them cooked into a rom?
Just CID unlock your phone, it works just fine.
Using SSPL-TRIN.exe or have you got to CID unlock?
With Pof's CID Unlocker. Has worked for me, and my friend.
pof said:
No it isn't, here's the answer:
The "official" WM6 rom NBH file has the OS part tagged as 0x401 (256Mb NAND) instead of 0x400 (128Mb NAND). Only the new SPL-3.03 included in this "official" upgrade is able to understand 0x401, so SSPL, HardSPL or CrashProof SPL or whatever that's not based on this SPL-3.03 (or newer) will not be able to understand the NBH header type 0x401 and will stop at OS flashing.
The solution is simple:
Unpack the NBH and repack it tagging OS as 0x400, then flash it using SSPL, or whatever hacked SPL choice we have.
Click to expand...
Click to collapse
good
my device is dopod 810 eng ver (HK). I flashed it to chinese ver WM5 before using SSPL. For WM6, i have no problem flashing to SEA ver. But always get invalid vendor ID for the Trad. Chinese rom.
I then tried to unpack and pack it again with 128MB size.
and work like a charm
thanks all!!
h0228631 said:
good
my device is dopod 810 eng ver (HK). I flashed it to chinese ver WM5 before using SSPL. For WM6, i have no problem flashing to SEA ver. But always get invalid vendor ID for the Trad. Chinese rom.
I then tried to unpack and pack it again with 128MB size.
and work like a charm
thanks all!!
Click to expand...
Click to collapse
May I know how to repack the file with 128MB size?
Hi, I would like to upgrade my device to WM6, but I want to be able to downgrade to my current ROM that I know works.
Where can I find this ROM to download?
If I can't get it, where can I get the tool to dump my own ROM (The link from the BlueAngel wiki is dead), and will it be easy to put it back on my XDA IIs?
Thanks,
RMSe17
happy new year!
but still the same old answer! READ THE WIKI!
Since everyone keeps asking for ROM kitchen for Diamond - here it is:
It is slightly modified and updated well known kaiser rom kitchen to work with Diamond. It has been tested with my Diamond and looks like it works ok.
First backup everything and read "!!!readmefirst!!!.txt".
Thanks goes to
bepe
cmonex
dark simpson
itsme
jcespi2005
jugglerlkr
mamaich
olipro
pof
tadzio
theblasphemer
and many others I forgot to mention...
http://rapidshare.com/files/126967186/DiamondKitchen_v0.4.rar
Thanks a lot. Will try once download is compete.
Thank you so much!
I'm using the kaiser kitchen from the beginning I had my diamond. Just needed some little changes, so you can flash to your diamond. As far as I can see: it works without problems, flashed many rom's(rom junkie xl )
Caspertje19 said:
I'm using the kaiser kitchen from the beginning I had my diamond. Just needed some little changes, so you can flash to your diamond. As far as I can see: it works without problems, flashed many rom's(rom junkie xl )
Click to expand...
Click to collapse
Please post what are these little changes, so everyones can cook with kaiser kitchen.
I´m planning to use ervius/bepe Trinity kitchen with some modifications into bat files.
Thanks.
axl79 said:
Please post what are these little changes, so everyones can cook with kaiser kitchen.
I´m planning to use ervius/bepe Trinity kitchen with some modifications into bat files.
Thanks.
Click to expand...
Click to collapse
I've just modified the .BAT files as you mentioned. As I am not an expert(just a home-cooker) I'm not going to post a modified kitchen. Just take the download from the 1st post. Al the credits goes to the names in the first post and as sais: many others
axl79 said:
Please post what are these little changes, so everyones can cook with kaiser kitchen.
I´m planning to use ervius/bepe Trinity kitchen with some modifications into bat files.
Click to expand...
Click to collapse
I hope ervius/bepe kitchen will be available for diamond too, and it is way much better than old kaiser' one. Or you can adapt it by yourself and publish for testing with permission from authors...
Dear all, Thanks you for all you did. Thank you very much ^_^
I've a question when Kitchen start and ask put RUU_signed.nbh in BaseROM folder...
Because I've new dump (Already dump 4 RAW file) a Hong Kong Tradition Chinese Rom1.37.832.4 CHT ROM
ROM Data:
========
ROM version: 1.37.832.4 CHT
ROM date: 06/23/08
Radio version: 1.00.25.03
Protocol version: 52.26a.25.09H
TouchFLO 3D Version: 1.1.34324.0_1630.32
So my question is which RUU_signed.nbh is correct put in BaseROM folder? Because this is a new dump I didn't have RUU_signed.nbh before...
Or can I use the one of this 5 ver ROM (Any RUU_signed.nbh)?
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08 _0.93.25_Ship
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Dia mond_52.26.25.09_0.93.25.26_Ship
RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_D iamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1. 00.25.03_Ship
RUU_Diamond_HTC_SPA_1.37.412.2_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
Please let me know. Thanks a lot!
Wolfblood said:
Dear all, Thanks you for all you did. Thank you very much ^_^
I've a question when Kitchen start and ask put RUU_signed.nbh in BaseROM folder...
Because I've new dump (Already dump 4 RAW file) a Hong Kong Tradition Chinese Rom1.37.832.4 CHT ROM
ROM Data:
========
ROM version: 1.37.832.4 CHT
ROM date: 06/23/08
Radio version: 1.00.25.03
Protocol version: 52.26a.25.09H
TouchFLO 3D Version: 1.1.34324.0_1630.32
So my question is which RUU_signed.nbh is correct put in BaseROM folder? Because this is a new dump I didn't have RUU_signed.nbh before...
Or can I use the one of this 5 ver ROM (Any RUU_signed.nbh)?
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08 _0.93.25_Ship
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Dia mond_52.26.25.09_0.93.25.26_Ship
RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_D iamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1. 00.25.03_Ship
RUU_Diamond_HTC_SPA_1.37.412.2_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
Please let me know. Thanks a lot!
Click to expand...
Click to collapse
If they're dump files, then get any official RUU_Signed.nbh from Diamond ROM flasher anywhere and put it together with 2 dump files (Part01 and Part02) inside the BseROM folder. Then select number 2 from this kitchen to do the job.
Like this:
1. RUU_Signed/unsigned nbh file from any official/cooked Diamond ROM but preferably the official one (But must be renamed to RUU_SIgned.nbh) + Part01.raw + Part02.raw ---> BaseROM Folder
2. Enter number 2 when executing !BEGIN.cmd batch file...........so and so...
This kitchen is modified from some other kitchen.
Hi cyphol
Thank you for your help, Thanks.
May I have one more question? When I'm on HTC ROM TOOL, I've input the data like this:
Device: Diamond *
Model ID: DIAM100
Country ID: 0404
Version: 1.37.832.4 CHT
Language: HONG KONG
is it correct?
And for the right hand side with that 4 options:
SPL: <Which file I should put it in?>
Splash: <Which file I should put it in?>
Radio: <Which file I should put it in?>
OS: os-new.nb <= I put this file in here, is it correct?
Please let me know, many many thanks. ^o^
xip problems
I always get a error when building my rom back up "Could not find file "ROM\XIP\BOOT.rgu" I'm clearly not extracting the rom correctly?
you only need to choose OS, and maybe spalsh if you want. since spl is already flashed you don't need to touch it. and do you have radio for diamond? answer is no - so don't touch it either.
Wolfblood said:
Hi cyphol
Thank you for your help, Thanks.
May I have one more question? When I'm on HTC ROM TOOL, I've input the data like this:
Device: Diamond *
Model ID: DIAM100
Country ID: 0404
Version: 1.37.832.4 CHT
Language: HONG KONG
is it correct?
And for the right hand side with that 4 options:
SPL: <Which file I should put it in?>
Splash: <Which file I should put it in?>
Radio: <Which file I should put it in?>
OS: os-new.nb <= I put this file in here, is it correct?
Please let me know, many many thanks. ^o^
Click to expand...
Click to collapse
ratcom said:
I always get a error when building my rom back up "Could not find file "ROM\XIP\BOOT.rgu" I'm clearly not extracting the rom correctly?
Click to expand...
Click to collapse
are you trying to rebuild rom from dumped files or just cook ship rom?
JugglerLKR said:
you only need to choose OS, and maybe spalsh if you want. since spl is already flashed you don't need to touch it. and do you have radio for diamond? answer is no - so don't touch it either.
Click to expand...
Click to collapse
OIC, Thank you very much! Thanks.
JugglerLKR said:
are you trying to rebuild rom from dumped files or just cook ship rom?
Click to expand...
Click to collapse
Shipped roms using the RUU_signed.nbh
Some small findings:
1.the splitted .nbh convertes an 00_Unknown.nb.
that should be the Radio.nb, right ?
2.The extracted 02_MainSplash.nb will be converted to an 240x320 pixel bmp. should be 480x640.
I've made only a short test with the HTC_Europe_1.37.401.3, but it semms the !begin script causes some errors while extraction.
Can someone confirm, that the kitchen works on Diamond ?
Works the rebuild from a .raw dump to build a valid backup ROM ?
JugglerLKR said:
are you trying to rebuild rom from dumped files or just cook ship rom?
Click to expand...
Click to collapse
Hi I having the same problem I am trying to rebuild a rom from raw
to rebuild rom from RAW dump you should check if you have valid raw files and SUITABLE base rom. suitable means same version - different language/region - coz rom rebuilding works only if dumped rom and base rom has same version. you can't rebuiled dumper 1.34 rom with 1.37 base.
Wolfblood said:
Dear all, Thanks you for all you did. Thank you very much ^_^
I've a question when Kitchen start and ask put RUU_signed.nbh in BaseROM folder...
Because I've new dump (Already dump 4 RAW file) a Hong Kong Tradition Chinese Rom1.37.832.4 CHT ROM
ROM Data:
========
ROM version: 1.37.832.4 CHT
ROM date: 06/23/08
Radio version: 1.00.25.03
Protocol version: 52.26a.25.09H
TouchFLO 3D Version: 1.1.34324.0_1630.32
So my question is which RUU_signed.nbh is correct put in BaseROM folder? Because this is a new dump I didn't have RUU_signed.nbh before...
Or can I use the one of this 5 ver ROM (Any RUU_signed.nbh)?
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08 _0.93.25_Ship
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Dia mond_52.26.25.09_0.93.25.26_Ship
RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_D iamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1. 00.25.03_Ship
RUU_Diamond_HTC_SPA_1.37.412.2_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
Please let me know. Thanks a lot!
Click to expand...
Click to collapse
You can use any 1.37 ROM whether it is CHT or WWE. So, RUU_DIamond_HTC_Asia....1.37.707.1 will do
Wolfblood said:
Hi cyphol
Thank you for your help, Thanks.
May I have one more question? When I'm on HTC ROM TOOL, I've input the data like this:
Device: Diamond *
Model ID: DIAM100
Country ID: 0404
Version: 1.37.832.4 CHT
Language: HONG KONG
is it correct?
And for the right hand side with that 4 options:
SPL: <Which file I should put it in?>
Splash: <Which file I should put it in?>
Radio: <Which file I should put it in?>
OS: os-new.nb <= I put this file in here, is it correct?
Please let me know, many many thanks. ^o^
Click to expand...
Click to collapse
Nope. If you're using this kitchen from JugglerLKR then it's already in there. Select the option for Diamond. The correct settings will be:
Device: DIAMOND *
Model ID: DIAM*****
Country ID: 11111111
Version: 1.37.832.4 CHT (It's your choice)
Language: CHT
Others have been answered on post #12 by JugglerLKR.
my friend just recently bought diamond and everything is in korean(he can't read korean) i'm going to get his phone tomm and install hardspl, dump the rom and make a minor modification on his oem korean rom. i'm not asking how to do it, since i found most of info here in xda, but i am asking you for tips. i have never flashed rom nor dumped rom before. any tips you can give me, that will be great. after i dump the rom, i will try to post it up so that everyone can take a look at if they want to.
p.s one quick questions....is it possible to change tf3d's language only? i've been hearing that diamond in korea can't use custom rom because it uses diff xip and radio. if that's the case, is it possible to forward xip and radio from korean rom to custom rom? please any tips can be helpful REALLY!!!
Usually, when you make a custom ROM, only this part gets flashed, which means, your radio stays intact, unless you explicitly add a radio to flash also.
XIP usually accompanies an OS build.
Your device should work just fine as long as you don't make a mish mash of the os files, and as long as you preserve your OEMDrivers (along with any operator provxmls).
If you need any help, just dump the rom, upload it to mediafire or filefactory and PM me.
adwinp said:
Usually, when you make a custom ROM, only this part gets flashed, which means, your radio stays intact, unless you explicitly add a radio to flash also.
XIP usually accompanies an OS build.
Your device should work just fine as long as you don't make a mish mash of the os files, and as long as you preserve your OEMDrivers (along with any operator provxmls).
If you need any help, just dump the rom, upload it to mediafire or filefactory and PM me.
Click to expand...
Click to collapse
i have successfully dumped the sk rom and i am posting up in rapidshare. i will post the link soon as it's done =)