Related
My First Post! How's it going everybody! (Newb Alert)
I just purchased a Bell HTC Desire Z from a classified ad off of an older man who found that the phone wasn't fully functioning. The poor guy probably paid around $400CDN for the phone, but I ended up eventually buying it from him for $250.
Here is what is wrong with the phone:
1. Power Button-does not work, neither on or off...basically fully unfunctional and only way to turn phone off is battery pull...fun stuff! (planning on using the Teardown/Repair guide by verkion - recommended?)
2. The In-Call speaker (where you put your ear while talking on the phone) seems to have very limited sound, perhaps something has been destroyed on the inside, how all other sound mechanisms work, such as the external speaker and internal speaker w/ headphones. (planning on using the Teardown/Repair guide by verkion - recommended?)
3. The Digitizer, well parts of it (along the left edge of the phone when upright) are unresponsive, so called blind spots which when touched are unresponsive on the digital keyboard along with the home button (house shaped icon) - especially frustrating when browsing web pages because I have to click back like 10 times to get home... (planning on using the Teardown/Repair guide by verkion - recommended?)
4. It is a Bell branded phone, Locations does not work! however I have done the research on the forums and I think I can figure out the whole Rooting thing out, but advice is appreciated! (planning on using gtrab's FAQ for Dummies for the rooting, s-off, and de-branding)
Now...I am not really technologically inclined to the level most of you probably are, but I am good with my hands and really interested/curious about this whole mission I need to complete, so I can fix this phone myself instead of paying $100 for cell phone repair...plus its a nice challenge right?
Do you guys recommend that I take care, or at least attempt to fix the power button issue before I root the phone to a previous, unbranded firmware which will allow me to use Locations? This only makes sense right, because I am going to need the power button for that process?
I know this is a lot to ask, but I just need some pushes and shoves to get me on the right track to try and get this to work, so if it is technologically impossible or excessive...please let me know how I can fix 4 of these problems methodically in a safe and professional way!
Once again, I appreciate it.
Thanks in Advance
EDIT: My prediction is that the individual who originally owned this phone dropped it and as a result the digitizer, power button, and speaker were all affected...but of course I am no expert.
To me it sounds like the flex cable has been damaged. It would definitely cause all these things at once.
I'm pretty sure you need to fix the power button before rooting because you need the power button to actually root it.
Hmmm,
Never thought of that but it sure seems like a better diagnosis. The flex cable originates in the bottom half of the phone in the same compartment that the z hinge is found right?
It is also the flexible strip that runs through the middle of the phone when the hinge is half-way positioned, connecting the lcd/digitizer to the main motherboard of the phone?
I geuss replacing the flex cable would still involve the Teardown/Repair, however I dont think I will need to replace a power button, speaker, or digitizer IF!...that is the case.
Any other ideas on this?
TheToiletSpaula said:
Hmmm,
The flex cable originates in the bottom half of the phone in the same compartment that the z hinge is found right?
...
It is also the flexible strip that runs through the middle of the phone when the hinge is half-way positioned, connecting the lcd/digitizer to the main motherboard of the phone?
I geuss replacing the flex cable would still involve the Teardown/Repair, however I dont think I will need to replace a power button, speaker, or digitizer IF!...that is the case.
Any other ideas on this?
Click to expand...
Click to collapse
Yes thats the flex cable, it is built into the pcb behind the lcd, so the whole pcb has to be replaced AFAIK. Yes it requires a full tear down to do it, fairly basic to do, my phone is in pieces atm because the lcd needs replacing.
If the flex cable is the problem then none of those parts need replacing, it would be very unlikely in my opinion for all those parts to fail from a drop without it being flex cable related, possible though.
Link to the teardown, some steps in the middle are unneccesary for what you need. http://tjworld.net/blog/htc-desire-z-tear-down
elliott2705 said:
Yes thats the flex cable, it is built into the pcb behind the lcd, so the whole pcb has to be replaced AFAIK. Yes it requires a full tear down to do it, fairly basic to do, my phone is in pieces atm because the lcd needs replacing.
Click to expand...
Click to collapse
Hey, do you know where I can get a replacement pcb if I decide to take that route man? Seems hard to find that as a single part for sale...
I assume people replace their whole phone if they have a problem like mine :/
You wasted your freaking money on that phone!
250 is a huge waste!
You might as well add a line to your friends for the contract price.
melodicjunkie said:
You wasted your freaking money on that phone!
250 is a huge waste!
You might as well add a line to your friends for the contract price.
Click to expand...
Click to collapse
it's not THAT bad...considering a brand new one unlocked DZ goes for 450+ and i knew I could fix parts of the phone so for -200 cheaper...i don't know bro!
I just need to know if a replacement pcb is possible to get, or maybe just the flex cable is damaged in which I wouldn't need to replace something so crucial.
Who knows what to do?
EDIT: 450 where I live...Ontario, CA.
...i dunno...could even be water damage that did the deed to that phone....in which case you could be replacing a pcb...or not....I've seen water-loged phones come back to life before....sad thing is it might cost you a few to fix it properly...
Totally agree 250 was to steep...that guy probably paid 79 on contract for it....
Sent from my HTC Vision using XDA App
tvnaderwal said:
...i dunno...could even be water damage that did the deed to that phone....in which case you could be replacing a pcb...or not....I've seen water-loged phones come back to life before....sad thing is it might cost you a few to fix it properly...
Totally agree 250 was to steep...that guy probably paid 79 on contract for it....
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Wow about the whole coming back to life thing you just said...thats exactly what my digitizer just did, so the left side of my lcd is now working including the home button!
Im guessing the touch panel ribbon was loose but it somehow shifted to functionality.
Great...now for the in ear speaker and power button, and 250 wont seem too bad!
Edit: anyone know how I can look for past signs for water damage like a colored change in a sticker or something?
TheToiletSpaula said:
Wow about the whole coming back to life thing you just said...thats exactly what my digitizer just did, so the left side of my lcd is now working including the home button!
Im guessing the touch panel ribbon was loose but it somehow shifted to functionality.
Great...now for the in ear speaker and power button, and 250 wont seem too bad!
Edit: anyone know how I can look for past signs for water damage like a colored change in a sticker or something?
Click to expand...
Click to collapse
There are 2 water damaged indicator stickers, 1 under battery and, 1 under the back housing, you can see it through the opening where the top tab of the battery door latches.
Edit: Forgot.... 1 on the battery too.
What color would the stickers be? They are both white, does that mean anything?
If they are pink they got wet.
Sent from my HTC Vision using XDA Premium App
^^ What they said.... Pink or Red
250 is quite a bit for a device with issues, but good news is it isn't water damage by the sounds of it.
I'm an aviation electronic tech, and your symptoms definetly sound like a loose interface ribbon. If I were u id haul it apart and reseat the flex cable you guys are talking about. I would put a 85% chance that's the issue.
good luck, and welcome fellow canuck to xda and dz family
Sent from my HTC Vision using XDA Premium App
Sounds good guys.
However...even if it is probably the flex cable that is causing the remainder of my problems:
1. the in call speaker being super quiet
2. power button not working
Is there any other chance that the speaker and power button areas have loose connections? what should i look for when i open the phone aside from ribbon/flex cable connections?
I need to get the power button fixed because then i can move onto rom modifications and stuff to finally get locations!
Hello, I saw that someone else asked a similiar question before but they did not word the question correctly and got little help.
On my HTC EVO logic board, there's three tan "ports" (I don't know what they are actually called). One for the front camera, one for the LCD, and one for the front panel.
While walking home one day, my screen started showing a dark spot. The spot got bigger, and I decided to take apart my phone (something I'd done before a few times) and try to clean things up. I put everything back together, and the LCD would not come on. After numerous tries, I finally decided the LCD was damaged. As I went back in the phone, I saw that regardless of whether you flipped the black tab on top of the LCD tan 'port' back or forward, the cable was capable of being pulled out, e.g., it was not secure. At the time, I thought nothing of it, but now that my new LCD should be here, I'm worried.
Is my LCD not working because the 'port' is broken? If so, what can I do to repair it? (I heard it is very difficult). I'm worried, because I paid a lot to buy a new LCD and will be unable to send it back.
http://guide-images.ifixit.net/igi/ZYHLZwIIVhjilEpT.large
Also, my front panel cable never sits 'perfectly'..that is, I have to connect everything else first, and then try my best with the front panel. The tape does not stay down flat completely.
These sorts of connectors can be fixed,but there is quite a bit of skill involved. Upload a picture and I can tell you better how hard it is. What I can tell you is that you probably cant do it yourself. I base this on the fact that those who have the necesesary skils will instantly know its going to be a pain. In fact,its easy to screw it up ,and sometimes you do,even if you DO know what your doing. Since I dont want to take my phone apart,Ill need to see a picture of it before I can tell you anything more. One thing to keep in mind is that sometimes the ribbon cable CAN be pulled out anyway,and is making good contact and there is some other problem. If you have not installed the new LCD,install it and see if it all works. If so,your good to go. As a general rule,the connectors are delicate and its not a good idea to pull them out. In fact,dont disconnect them if you dont have to. They have a limited number of connect/disconects they can take and they are very easy to break.
pflatlyne said:
These sorts of connectors can be fixed,but there is quite a bit of skill involved. Upload a picture and I can tell you better how hard it is. What I can tell you is that you probably cant do it yourself. I base this on the fact that those who have the necesesary skils will instantly know its going to be a pain. In fact,its easy to screw it up ,and sometimes you do,even if you DO know what your doing. Since I dont want to take my phone apart,Ill need to see a picture of it before I can tell you anything more. One thing to keep in mind is that sometimes the ribbon cable CAN be pulled out anyway,and is making good contact and there is some other problem. If you have not installed the new LCD,install it and see if it all works. If so,your good to go. As a general rule,the connectors are delicate and its not a good idea to pull them out. In fact,dont disconnect them if you dont have to. They have a limited number of connect/disconects they can take and they are very easy to break.
Click to expand...
Click to collapse
Well, I don't really have a means of taking a quality photo except with my computer webcam but I'll try in a second. I can't really show you because there isn't much to see. The little black bar that flips up and down to 'lock' the port is ineffective; the cable can be pulled out regardless. I know I can't fix the port/connector by myself, so I'm hoping that's not the issue. You have given me a lot of hope though. The new LCD should be here by Wednesday at the latest, so I'll be able to test it then.
Does my front panel affect the LCD? Since I dropped my phone on the corner, even with a new panel it does not sit 'perfectly'. I don't think they're related though.
BluRngerGurl said:
Well, I don't really have a means of taking a quality photo except with my computer webcam but I'll try in a second. I can't really show you because there isn't much to see. The little black bar that flips up and down to 'lock' the port is ineffective; the cable can be pulled out regardless. I know I can't fix the port/connector by myself, so I'm hoping that's not the issue. You have given me a lot of hope though. The new LCD should be here by Wednesday at the latest, so I'll be able to test it then.
Does my front panel affect the LCD? Since I dropped my phone on the corner, even with a new panel it does not sit 'perfectly'. I don't think they're related though.
Click to expand...
Click to collapse
I dont think so. I bet your ok. Just dont keep playing with the connector. I know,Ive done it. I sit there messing with it,wondering,is it broken? Is it good? Then the little black peice comes off in your hand or the plastic breaks and "well its sure broken now!" Remember,that little latch does not so much hold the cable in place as hold the cable against the contacts,if its making contact,its good to go.
Hi, all. The new LCD I receieved did not work. There are very minor differences in the two; such as some type of blue gunk on the silver part of the LCD, the connector is more of a dark orange on the new one while the original is a yellow-orange, etc. Also, again, the connector does not 100% fit in the slot. It goes in, but a small corner sticks out a bit and you have to either hold it in or clip it in [which I can't, because the black clip is broken].
The only possibilities I can think of are
A] Because the little black thing is damaged, no LCD will work in it. Therefore I need a new phone.
B] The LCD does not work.
C] The LCD is the wrong size.
At this point I want to just give up and get a new phone, which is very heart-wrenching because I love my EVO and I doubt I can afford the only other phone I like, the Samsung Galaxy S II Epic Touch 4G.
Is anyone able to identify what connector is used on this phone for the LCD? I broke a pin on the connector while trying to repair a cracked screen. I would like to buy it and re-solder it on to fix the phone.
Can someone link the correct connector maybe from digikey.com?
Broken latch
I too have a problem with the connector... the plastic part that connects the ribbon cable to the main board has broken. There must be a place to buy these tiny plastic latches... does anyone know? Your assistance will be greatly appreciated!
Mac-
Many One X owners, including me, has be having from display/screen issues that are quite annoying. And apparently, none has a definite answer as to what the main cause is. hTC has exchanged all those faulty devices, claiming it's a "hardware" issue...while in fact, it's their stupid back covers...i'll explain as we speak.
First, to know what screen/display problem i'm talking about, please refer to this Video.
Few days ago, i got my hands on a "Dead" One X...but i just refused that fact...because it just works! but no screen....screen is always blank....can touch it, go to dealer and make a phone call even. Sometimes the screen turned, sometimes, and it was like in the video, exactly like it.....so what's the problem?!
yesterday, i'll be honest, i got mad at this phone and held it with a tight grip...my finger happened to press just above something...and the screen turned on! worked great in fact! i was astonished! it just worked....but, oops, i turned off screen, then when wanting to turn it back on...blank...
I kept pushing on the back casing of the phone, trying to find the same place that made the screen turn back on...and viola, same place pressed on, screen back on.
Wanna know what's causing all of this?
Here you go:
Click me!
And those connectors Should be in good contact with this on the back cover
Click me too!
But you know, hTC ****ed this one up, just like it does on most devices with connectors on the back cover...*sigh*...like the sensation for example...
So what to do now?
i tried a bunch of things, and almost broke those connectors with a stupid thick aluminum foil on top of them...
also i tried bending them up, but that doesn't help either, as when the cover pushes them down, their shape will change and well...didn't work.
i also tried putting aluminum foil on the metal connectors on the actual cover...didn't help as well!
it seems only pushing on it from outside does the trick!!
i also tried pushing on the connectors together while the back casing is off, didn't work...as it seems there must be a triple connection...board, connectors, and cover...
I think the only solution would be with a new back casing? but...if hTC f****d it up with this one, wouldn't all back casing suck too?? or is this a manufacturing problem that the connectors are just short and won't connect well?!
here are pictures of how the phone turned on magically after pressing over that connector, and another of how the screen gets messed up when the, well, there's not a good connection...Thank you hTC!
Sample 1 Sample 2
Tomorrow i will buy a new back casing and report if that helped me or not.
I only came to this because i have no warranty...if you have warranty, please consider an exchange!
Oh, and finally, i was able to get into bootloader, first time i saw that screen! always has been blank!...pushing on the connector also did the trick.
Finally!
Soooo...comments?
If anyone has an idea on how to make the back casing come in better contact with those connectors, please let me know.
UPDATE
Hmm, why did you put this into Q&A?
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
EDIT: lol, it's all good now ^^
arabology said:
what? in a bad mood and wanna bash me?
where should i put it then? as people with such problem would come ask here, am i right?
Click to expand...
Click to collapse
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
PAGOT said:
Well nah, would post it into General , as this was more like a guide. I wasn't bashing.. and not in a bad mood... If anything I bumped your thread up...
Also wanted to say that those contacts and that case seems to be f..cked up in general. As next to those you have the WIFI ones which in another thread, thats in General is shown how to fix...
My first comment was a compliment and you could clearly see I was smiling as I am on my avatar smiling. No reason to get defensive...
Click to expand...
Click to collapse
oh well...also WIFI connectors are bad?...no wonder SIII is flying and hTC is dying...
anyway, maybe a moderator can take this thread to the general forum, thanks for pointing those things out!
and sorry i seemed mean, but many, really, many users have nothing better to do but nag...trolls
thanks ^^
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look normal again.....hmmmm
arabology said:
Soldering would fix this!
putting two round solders on the gold plates of the back cover. i will try that tomorrow. but i fear they would squash the connectors on the board? as that's what happened when i used two tiny balls of aluminum foil....one connector got squashed by it and i had to push it back up and play with it to make it look notmal again.....hhhhh
Click to expand...
Click to collapse
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
muamers said:
Moved to general forum hope youll fix it bro...
So it is a hardware fault,would never guess that...in the general forum you have a topic with the name "wifi fault" give a look on that
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Like you guys would say: "inshallah" :d
Just dont rush with the opening and be carefull
Sent from my HTC One X using XDA
waw another fellow citizen
so before we go ahead and go
doooom gloooom htcccc suxxxxxxx
lets first affirm tons of people have no problems with their wifi and their screens
so yes those connectors issues whether screen or wifi are another forum of a manufacturing defect, things might not be perfectly aligned and hence the issue
the flickering issue your thread title suggests finding the source of, isnt related to this, 90% of the corruption we saw out of box on the HOX turned out to be software including the back-light flicker which HTC fixed by readjusting the LCD voltage
moving on to your question a new back cover might very well fix it unless the misalignment is on the board
but im wondering why is this pin related to the screen to begin with? the Sensation didn't have such a pin you could remove the back cover and the screen kept operating, also the disassemble photos that were posted for the HOX showed the board and screen running perfectly without the back cover
as for the stupid copper foil, make sure you don't loose it unless you are planning to make a bomb its added to distribute Tegra3 heat
arabology said:
*nods* already took a look at that
will try the soldering...or connecting a wire between both connectors...one of those should work
Click to expand...
Click to collapse
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
i say you should demand an exchange. hopefully the device they'll give will be of a different tier of products that doesn't have that silly, unknown problem.
also, i'm pretty well sure that they won't repair your device. as i read many users regarding this issue, all of them got an exchange......seems pretty messed up. and i doubt my paper trick will hold long before this issue comes back
PAGOT said:
Before you do that, please check the WIFI thread. There was already one member that described that soldering or adding a wire might be possibly harmful in the long run.
Changing the electricity stuff, how its called, the resistance or something (for the antenna though)
Click to expand...
Click to collapse
now that i have a paper inside my back casing, i can see that my WIFI connection is not at it's best, because of the extra space it took. so i'll most probably solder all the connectors
arabology said:
Update:
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
there was some guy, who posted a youtube video of when he pushed a certain area of his screen (the front part), it would switch off!
It only did it when pushed in that area, it was literally like a second power button.
Sorry I don't know exactly what it was, just the fact that somebody else had a similar problem!
HTC repaired my phone as the screen was faulty, it had a yellow tint, when i sent it for repair it did have screen flickering, ever since its come back, with a new screen, i rooted it and also put in the NEW ARHD rom, 2.05.2 base or something, it has stopped flickering :fingers-crossed:
walker07 said:
I'm having the same damn issue (check the picture) and thanks to Arabology for the well explanation on the problem. what I did was to send my phone to the service center and they told me it will take 3 working days (today was just the 1st day) for the technician to diagnose the fault and decide whether to replace the device or to repair it.
given that its a well known defect - should I just demand an exchange for a new device just incase if they revert that they repaired my phone? because I am sure the chances for the problem to reoccur is high.
Also just so you know I purchased this phone only about 3 months ago in HTC roadshow launch of OneX in Malaysia. HTC needs to come out with really quality products otherwise they will loose all their customers to samsung & apple (I believe they already lost major % of their loyal customers to their rivals)
oh well hope to get a good news soon. will keep u guys posted.
Click to expand...
Click to collapse
Finally found someone with the exact same problem. I haven't been able to use my hox properly for weeks. Think I need to be sending back to HTC
Sent from my X10i using XDA
Finally I've got my OneX replaced with a new unit.:laugh: Hoping this will not have any sort of hardware faulty anymore.
interestingly. while waiting for my turn in the service center, I was just talking to a guy sitting and waiting beside me who came to report a problem with his OneX
and apparently its his 4th time visit to the service center. And all his previous 3 visits ended up with his OneX getting replaced each time....and each time with a different hardware issue (screen flickering / dead pixels / color faulty). Oh man....I thought the OneX was the best quality product from HTC.
and now I'm having a slight regret that I shud have just waited for another 2 more months and bought the SIII instead. God knows what other problems my OneX is going to come up with.
Hi
arabology said:
Update:
well, My One X is just cursed, few days ago it feel off my hand and the screen got cracked. now i'm waiting for my local repair station to get hold of a One X digitizer.
ALSO, HUGE NEWS, seems i was wrong. it's not the connectors. it's the whole part where there is a copper kinda sheath over it...i guess that's where are the cores are plus the Nvidia Tegra chip??! turned out, when i push there, that the screen lights up. at first i thought it's the connector, coz that's the most reasonable right?
what could be wrong under that? well, that place can be taken off, there's a metal housing that can be lifted off....idk, nothing seems wrong there...but seriously, just a slight push lights up the screen! so now i'm using the oldest trick in the book, i put a wrapped paper at the back of the casing, just where it will push over the place i talked about, and now screen is always on....just this small push does the job!! no more flickering!
i repeat, it's not the connector nor the back casing.......only God and hTC knows what's going on...
i did further investigations and tried to relate the "push" to any connections that could be on the board from the other side, but after disassembling the phone, there does't seem to be anything on the other side of the board that needs that certain force to help the screen to light up....idk, this just boggles the mind.
...anyone has any clue?!?
BTW, phone is working great even with the cracked screen, playing Dark Meadow just fine
Click to expand...
Click to collapse
Probably what's referred to as a dry joint or some other connection not connecting very well, not uncommon in electronics.
You need to get it repaired or replaced, simple as that. If it is a dry joint under one of the chips that use a ball grid array of solder points, you will never be able to sort that out yourself and it would be scrapped more than likely rather than a repair attempted for such a fault. To repair, it would need to go into a special over to heat it enough to melt the solder under the chip. Exerting pressure will just eventually make things worse as you can end up fracturing more of the soldered connections as there is little give to resist flexing.
Regards
Phil
so just a minute ago i had my nexus hooked up to my tv via hdmi mhl and i was using for about 5 min.. then i plugged in my headphone jack .. then a minute latter i smell an electrical burning smell so i look down and i get a google plus notification and the notification light turns red.. even though the screen is on. i pick it up and the bottom portion of the phone is scorching hot and so i quick unplug everything and then the light turned light blue..!!!
i as fast as i could ripped off the battery door cover and yanked out the battery.. waited ten minutes for it to cool down and anytime i reinsert the battery it turns the light on the same light blue and heats up!!!
i think some solder might have melted over.. but does anyone know why??
or has this happened to anyone before??
so it has stopped heating up now.. but it is stuck in that cyan blue color alllll the time off or on..
warranty isnt really an option im pretty sure its voided..
but if anyone wants to buy a cheap 1 month old galaxy nexus with a broken notification light let me know..
haha life ...
balls !
there is no way to get at the circuitry for the noti. light without seperating it from the glass..
guess i cant fix the melted connection
Also media volume doesnt work on external speaker but ringtones and alerts and alarms do.. but all barely work through headphone jack...
I keep mine ventilated when I use the mhl. And under clocked for that reason.
need more high def music...
Found some replacement board parts on eBay and a good deal on a damaged gem nexus so I can swap parts from it..
hopefully I can salvage this thing..
@rbiter said:
I keep mine ventilated when I use the mhl. And under clocked for that reason.
need more high def music...
Click to expand...
Click to collapse
I would play Nova 3 on my TV for hours at stock clock speed and with a ps3 controller connected via Bluetooth and never did it get so hot!!
Mhl is pushing two screens at once and taxing the CPU and gpu, GPU especially. This problem could've happened over time. Too many people ignore keeping electronics cool, even lowly wattage mobile devices. It will happen again if you don't take preventative measures. You're not the first.
need more high def music...
You can get your warranty back if you flash 100% stock ROM via fast boot or toolkit and provided your warranty is still in date (12 months?) See if your issue still occurs.
Sent from my Galaxy Nexus
Just wanted to post my final results...
In case anyone else has this issue..
I replaced one part and all is well again..
if you take apart your phone and underneath the headset and ext speaker module you will see the micro USB port attached to a board.. the board is connected to three others in an L shape via some ribbon cables..
I replaced that whole piece and everything is great... it cost me 17.99 and went from California to new York in 2 days!!
Hi,
First you can all say i screwed up and i am stupid.... i assume and i feel stupid, trust me !
I don't know anything about electronic or programming as you but i want to share and maybe find a solution with you for my problem.
3 days ago, I wanted to clean my lens because some dust were on it, so i put out the 2 screws around the lens... of course i did not see they were different...because i am stupid with it ! when i clean it i mixed the two screws so the big one went to deep behind the plastic and make a perforation on a component.
I join a picture to let you see a small hole in the blue part on the right of the camera lens !
Since, the battery is down in 3hours. Android tell me the system use around 80% of the battery and it is warm on the plastic around the lens.
The wifi never want to be put on and the bluetooth too (the MAC WIFI is now : 02:00:00:00:00:00)
The telephone and the 4G are working perfectly
I tried to put a small electric scotch on the hole but this don't change anything.
I just want to use this phone as a phone now, i don't care if the bluetooth, the wifi or the camera is working well or not at all....
Is it possible with the hidden menu to disconnect this component???
Do you have a solution which allowed me to continue using this phone which is perfect otherwise?
Sorry for my english....as you can see, i am not so good with it !
Thanks in advance for your advice...
Any idea of
What is the component i touch with the screw???
how i can use the hidden menu to disconnect wifi and bluetooth???
Thank u
nitsuguaaaa said:
Any idea of
What is the component i touch with the screw???
how i can use the hidden menu to disconnect wifi and bluetooth???
Thank u
Click to expand...
Click to collapse
I have a vs985 & yours is a d855, but I think the boards are similar enough to try and help.
It's not a component you hit - it's just tape. I opened up my phone and tested that spot on the board with a DMM and it looks like a ground plane underneath the tape you punctured. That in itself shouldn't be causing your problems, but if your screw went through the ground plane & into the board it may be shorting something out which could be causing your issues. If that's the case I don't know if your phone is salvageable.
1)Try removing the back cover and see if the issues go away. There is a possibility that when you re-assembled the phone something ended up out of place/off its contacts.
2)Also, I'd take a closer look and see how deep the screw went. Maybe take a fine tip tweezer and see if there is some of that ground plane mashed in the hole & try to gently peel it out.
3)And, of course, try resetting your phone or even re-flashing at some point - just so you can know for sure you didn't have some weird software glitch that just happened to show up after you opened your phone.
Hidden menu - I've never used it and I'm not on stock so I can't tell you much about it's functions. Here's a link... https://www.reddit.com/r/LGG3/comments/3z4nwi/lg_g3_hidden_menu_on_60_marshmallow/
Good luck - hope you get it sorted out
thanks,
I ll try tomorrow and tell you ASAP !!
THX again to spend time for me