Develop Bugs

Help with HTC Touch Diamond, won't boot

Hello, this is my first post here. I tried to install Windows Mobile 6.5 as indicated in Gizmodo http://gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now but it didn't work and now my phone won't boot.
The phone is an HTC Touch Diamond from Sprint. I followed all the steps indicated and everything look fine, but after installing the OS the phone displays the screen TOUCH DIAMOND, and then restarts and displays the same thing. I'm able to get into the boot loader (Tri color screen) and says:
DIAM500
SPL-0.57.CMONEX
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20.
I don't know what to do now
Thanks

try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..

dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.

Flash from Olinex 1.40 screen?
okokur said:
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Click to expand...
Click to collapse
Hi I have the same issue on my HTC Diamond. I flashed wm 6.5 and it was working fine, then it hanged on titanum weather. I reset and it stayed on the HTC Diamond page, I did hard reset and got the Olinex 1.40 3 color page. It does respond from serial to usb when I plug/unplug. Can I reflash without active sync?
Turns out I was able to flash, but both roms I tried work well on 1st install, but stay stuck on the Touch Diamond screen everytime I restart de device. Is it a problem with the radio not compatible , or is there a specific Hspl for each ROM???

I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.

try to hard reset the phone by pressing vol down key + the center button + reset button.
if the problem is still like dat..
try to install another rom..

davidwong007 said:
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
Click to expand...
Click to collapse
Thanks davidwong007 for your help, I was experiencing the same issue as op and your method did the trick. For a minute there I thought I had bricked my HTC Touch. I did step by step what you suggested and ended up in the rainbox screen, once I was able to do that, I knew there was a hope. i did a full factory reset of the phone and voila the phone fully booted, the pain in the butt touchflow loaded. Very important thing I forgot to do in the past is to back up my phone, after the restore you will lose everything on phone, except what is in the internal storage. Thanks again.

Boot screen

How do I change the boot screen? I've got a Vodafone branded TP2 and don't like the logo flashing up when I turn it on. I know I can change the START_VF and SHUT_VF gifs but the very first screen is still Vodafone.
Also, how can I change the soft keys on the TouchFlo 3D Home screen? I've tried Advanced Config tool but can't seem to find it.

jimbob298 said:
How do I change the boot screen? [...] I know I can change the START_VF and SHUT_VF gifs but the very first screen is still Vodafone.
Click to expand...
Click to collapse
That splash (in fact there are 2) is part of the ROM. If you want to change it you have to wait until HardSPL is available.
jimbob298 said:
Also, how can I change the soft keys on the TouchFlo 3D Home screen? I've tried Advanced Config tool but can't seem to find it.
Click to expand...
Click to collapse
The option in Advanced Config works only if touchflo3d is not active.

tiny MASSIVE problem.

Hey everyone, I've been using custom roms since they first appeared on these forums. This said, i have come across a huge issue.
I was on a 2.2.1 rom and something was screwy with the radio so i flashed the right radio files, which didnt help. So after this i thought the issue must be deeper in the rom, so i decided to install one of the other roms i had that i knew worked. This now leaves me with a unbootable phone (goes to the point of blue android text) the animation stops and the screen flashes. The animation then restarts, it does this indefinitely.
I can boot into recovery and flash mode just fine. However interestingly in recovery i cant 'click' the hidden hide button in the bottom right to perform a wipe etc. Anyone have any idea on how to fix this?
thanks
Dave.

The "hidden button" doesn't work on 2.2 so to get into recovery screen when you see the android logo press the volume up & volume down buttons both at the same time. This will take you to the recovery screen where you use the volume button to highlight an action & then press the power button once to confirm it.

I feel so stupid.
Thankyou so much mate. I owe you a beer. +1 internets.
Solved!

yay101 said:
Thankyou so much mate. I owe you a beer. +1 internets.
Solved!
Click to expand...
Click to collapse
No problem - pleased you got it sorted

i just checked then and im runnign 2.2, i can still press on the bottom right and the hidden menu shows up...

Jt612 said:
i just checked then and im runnign 2.2, i can still press on the bottom right and the hidden menu shows up...
Click to expand...
Click to collapse
I know a Chinese custom 2.2 rom doing this as well. It's strange.

Help fast

I was putting the new Ascension rom on and I am now looking at a still pic of a open box with a arrow and a green android. What do I do? Thanx

tepeee said:
I was putting the new Ascension rom on and I am now looking at a still pic of a open box with a arrow and a green android. What do I do? Thanx
Click to expand...
Click to collapse
go back into recovery and wipe then reflash the rom

Did your rom package include a radio?
Sent from my PC36100 using xda premium

under clockwork....no matter what i press nothing happens. the picture stays on. Should i remove the battery?

on my screen underneath wipe data and cache it says (back button disabled)

tepeee said:
on my screen underneath wipe data and cache it says (back button disabled)
Click to expand...
Click to collapse
Hello, I had this problem before. You have to press the volume down key lots of times (or the volume up key, I forget which one). This will make the back button work again

harro3 said:
Hello, I had this problem before. You have to press the volume down key lots of times (or the volume up key, I forget which one). This will make the back button work again
Click to expand...
Click to collapse
You have to make the cursor "wrap" 3 times (I think it is 3) and then the back button will be enabled again. By wrap I mean move past the top menu choice or past the bottom menu choice.

Marshmallow HomeScreen Blinking

Hey guys .. Just flashed firmware marshmallow on my G3 but homescreen just keep blinking and I can't do nothing .. Somehow I enter to settings via notification bar shortcut , select EasyHome and this going OK, but when I choose Home the screen won't stop blinking
Do you have any idea how this can be fix ?
Thanks.