Develop Bugs

WiFi Network Browsing on PDA2k

I have a WiFi network at home but am having trouble connecting in to get to our file server. I can browse the internet using the WiFi connection, but cannot seem to connect a networked drive. It is asking about VPN's and such, which we don't have
Anyone know how this is easily done? It might be easier if I can enter a username and password to log into the file server...

i'll take a stab at this. can you please clarify whether you are sharing a physical drive or a directory.
can you do a simple test by sharing a directory on your PC and install a demo of Resco Exprorer 2003 on you PPC. then try to browse your network with Resco Exprorer. you should be able to see the shared folder unless you have the workgroup and/or firewall misconfigured.

I installed Resco, it doesn't show any computers on the network, although we have 4 or 5 up and running on the network just fine right now.
If I try and add by IP or by PC name, it gives an error which is likely because you need a username and password to browse these PC's.

I think you have some network setting wrong on your PPC. There some setting that need to be set on your PPC to be able to access your shared rescources. Make sure your PPC has the same workgroup name. I have read others post that the AP was the problem. After switching to another brand of AP, they were able to browse the network resources.
When I hit a brick wall like this, I back up using Sprite Backup. Then do a hard reset. It's often more simple to troubleshoot the unit with baring installation. When I find the problem, I restore my current backup and fix it from there.
I know I'm not helping much, but there are so many variables to your problem. You'll just have to stick with it. We know that the WiFi works since you can browse the interent. I for one almost regretted buying this unit. But when I found a stable ROM and stable productivity applications, I don't think I can live without it.

nomadman said:
I think you have some network setting wrong on your PPC. There some setting that need to be set on your PPC to be able to access your shared rescources. Make sure your PPC has the same workgroup name.
Click to expand...
Click to collapse
But how do I find network settings like this?

Try going into the WiFi Setting and play with Work and Internet settings. I attached MyIpConfig for PPC. Extract the file and copy the extracted file in any directory on your PPC and run it. This will give you some information that may help troubleshoot. Make sure the WiFi adaptor is selected than go into the "More Info" option. This will give you the workgroup name.
Have you backed up and hard reset yet?

Can't connect to my own FTP server with my 9090 - SOLVED!

I have a personal FTP set up with the Internet Information Service on my LAN, and I can connect to it with everything but my Qtek. Does anybody know why? I can connect to several external FTP servers I have tried. Should I use something else than regular PocketIE?

I use resco file explore to connect to ftp sites and links of this site through my MDAIII work fine for me if I want to download the files to it.

Finally found it! It wasn't the PPC at all, it was a misbehaving firewall. It was set to stealth blocked ports, but it even stealthed ports that weren't blocked, as long as they weren't in use from the server and out, so connecting from the Net didn't work at all. Even over the LAN it didn't work for the PPC, but it worked from another PC. Why I have no idea...

Accessing folders on my desktop over wifi

First off, please accept my apology if this question has been answered somewhere, but I feel like I have checked the farthest corners of XDA developers with no luck............
I cannot not seem to access my desktop computer's folders over wifi anymore...........
now i am no stranger to WM phones in anyway, I've had the mpx 200, 220, T-mobile sda, mda, cingular 2125, audiovox smt5600,and have been tweaking forever and now the Cingular 8525, I am running the LVSW(3/26)WM6 rom
I use to be able to access my folders very easily over my past devices, so I need your help???????????
I think it's a combination of my connection settings, and wifi settings, but who knows..........
anyhow I'd really appreciate anyone's help, until now I"ve been only an addicted reader of this website, so please help , when I go into my file explorer, and attempt to put in the name of my computer(Reuben), it simply tells me it can't be found

afaik resco file explorer lets you browse computers over network no problem on the Hermes. Are you considering WM6 for your 8525??

I just tried connecting to my pc for the first time using Remote Desktop and works like a charm. I used this info to get me through this.
http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx
I did not go through all the steps mentioned, all I did was put a checkmark under REMOTE DESKTOP and ALLOW USERS TO CONNECT REMOTELY TO THIS COMPUTER.

reu15 said:
when I go into my file explorer, and attempt to put in the name of my computer(Reuben), it simply tells me it can't be found
Click to expand...
Click to collapse
Have you got a new router? Check and make sure that its network seperation is off. That stops you connecting to computers over the wireless.
Maz

network seperation?

I'm not sure about those devices you used but my iPaq 4155 connected to windows shared files differntly from the file explorer then my TyTN does. I'm not sure if this is what you are talking about.
The way you do it now is from File explorer:
Menu -> Open Path -> New Path
Then enter the network path ie \\Computer Name\Folder Name
Hope that's what you were looking for

that's exactly what I do, but then I get the error message, I am gonna reset me router and see what happens

reu15 said:
that's exactly what I do, but then I get the error message, I am gonna reset me router and see what happens
Click to expand...
Click to collapse
Dono - works fine for me. Make sure you're on the same subnet as the computer you are trying to connect to. Also make sure that computer doesn't have a firewall prohibitting connections (MS One Care does this as does I think the default MS Firewall - you have to turn on file sharing)

its just a simple networking. first, u must set your IP for wifi configuration manually & 'use server-assigned IP address' for pocket pc IEEE 802.11b/g bla bla bla as well. use resco explorer or total commander. it is so fun because i can play my huge video stored in my laptop directly in pocket pc even i'm in toilet (make sure file/folder sharing is enabled)

firstly resco is the best for this. if u aint got it, invest.
ensure file sharing installed on pc and u are mapping to the right share and it is all user access if possible
ensure on ur ppc u can connect to internet
try a diff pc to connect to share to limit issues to ppc and not ur pc
turn off firewall altogether
turn aff antivirus antispan and other internet protection
on ppc change wifi to connect to work not to internet
reset all devices.
use ur explorer to map a drive. if it doesnt auto show type it in full.
if all these fail ur gonna need to break this down to simpler stuff n piece meal test using pc to pc before using ppc.
the above also disables some serious security so once working piece meal them back on till u find what cut u off.
oh yeah one other beauty which allows u to change wifi connection type back to internet from work is to go into connections - exceptions and insert ur network ip address range. eg 192.168.* so it knows using this range is not an internet range.
these r some hints. i have had issues but usually pc file sharing, connection type or exception ranges.
failing this and u still need help we are going to need heaps of detail coving the PPC the wifi router and PC.
bearing in mind this should work even if troublesome for u. fiddle. if u can access the internet on ur ppc over wifi then it it is likey to be a pc based issue rather than ppc.
Simon

@Reu15
Be sure your firewall is not blocking this traffic. Check all logs to include those from SPAM and WORM protection. I can connect easy with total commander using my \\computer name only. Im still working on the remote display thing.

well, for what it's worth I tried and tried to do this with Resco and with Built in native file explorer and it wouldn't work. Slightly differnent in that I was trying to connect to my Samba server (linux)...but this should work fine, all other wifi PC laptops connect fine.
I read about an issue with this and tried the siggested fixes but I never got it working, annoying. The samba share never showed automatically. wierd.

I am very greatful for all your help, suggestions, and advice, but now I have a completely new problem, and its really got me pissed, please bear with me, but it has nothing to do with windows mobile so here goes:
while trying to follow this advice of an earlier post, (in windows xp) I right clicked on my computer icon on my desktop, went down to properties and selected, went over to the 2nd tab(computer name), and clicked the button for network ID, i selected the computer was part of a business betwork , but that it wasnt on a domain, that caused my main login screen to completely disappear, and now I have to log in my clicking ctrl+alt+del which is a pain, I want my login screen back...........

Samba - Linux
bingobob said:
well, for what it's worth I tried and tried to do this with Resco and with Built in native file explorer and it wouldn't work. Slightly differnent in that I was trying to connect to my Samba server (linux)...but this should work fine, all other wifi PC laptops connect fine.
I read about an issue with this and tried the siggested fixes but I never got it working, annoying. The samba share never showed automatically. wierd.
Click to expand...
Click to collapse
With Samba and windows I always have to manually configure my etc/samba.conf file. And make sure the user and permissions are set. You can also make it public just for testing. That will make it available for all users. Dont forget to add the same user/password in your linux box.
I am no GURU but my linux shares work perfectly with XP.

I have just managed to connect to my computer folders by using Resco file explorer and mapping network drive. I didn't need to change anything much and it worked straight away. Hope you've sorted it.

Windows Mobile to Server 2003

Hi folks, ive got an Excalibur(duh)runnin the Brightpoint ROM, WM6 and all that jazz...and I also have a personal server here at the house that runs Windows Server 2003....my question is can I connect my phone, over the network using EDGE, GPRS, or WiFi to my server and access files and stuff. I dont need to do any settings or crap like that, I just want to be able to monitor my data coming in, and data going out...thanks for any help!

I have a similar situation and was wondering if you made any progress on a Smartphone.

You guys have to be more specific then that if u want answers...

OrganicM said:
You guys have to be more specific then that if u want answers...
Click to expand...
Click to collapse
I think maybe what they are looking for is some software that supports a Remote Logon / Remote Desktop Connection (RDC).....
It's not something I have seen on a phone ROM since I had an SPV M500 with Smartphone 2003 Pocket PC Edition.....
.G.

the only way i have found to do that is via ftp. host the ftp on the server and run an ftp client on the phone. the phone doesnt support netbios or anything so you wont be able to access network drives or shares even if you are on the servers lan

Access to Desktop "Shared Folder"

Does anyone know how to access to my desktop's Shared Folder?
I have a wireless router, set Shared Folder option in my desktop, and connected my Dash to wireless internet.
I only need an app. (explorer) that supports network.
I tried PocketLan and GSFinder, but they are for PPC, not for smartphone.
Moreover, Resco Explorer 2007 smartphone does not support network.
I could access to my desktop's Shared Folder with my previous PPC and GSFinder+.
Thanks.

total commander.

Thanks for your reply.
I tried a free version of total commander; however, it doesn't have "Network" setting either.
Is there a specific version that enables Network?

i use a work around.. its not the soluton you need... but.. my 5cents
i use bluetooth. i have bluetooth ftp service with shared-folder in my desktop, then i just use "bluetooth explorer" in my dash.
my desktop = ubuntu
my excalibur rom = wm6.1 by rick (the last one i hope heheh)
i think you can google easy some bluetooth shared folder server for windows..

I would use Bluetooth Shared Folder if I had Bluetooth feature in my desktop; however, my desktop doesn't
Maybe, there is no way to access to "Shared Folder" in Smartphone. I found no result even though I spent a long time searching about Shared Folder in Smartphone.
I've loved to use "Shared Folder" feature in my previous PDA since I didn't have to use USB cable each time I want to move some files.

Mrkim said:
I would use Bluetooth Shared Folder if I had Bluetooth feature in my desktop; however, my desktop doesn't
Maybe, there is no way to access to "Shared Folder" in Smartphone. I found no result even though I spent a long time searching about Shared Folder in Smartphone.
I loved to use "Shared Folder" feature in my previous PDA because I didn't have to use USB cable each time I want to move some files.
Click to expand...
Click to collapse
long story short...the smartphone wont handle netbios broadcast and i dont think any of us have figured out a windows networking work around....i will play around tonight with a few little things i have found......one of the work arounds is using www.orb.com . or you can get one of the mobile ftp clients and set up your pc as an ftp server. you can also use vnc to transfer files if im not mistaken.
i will let you know how my little test goes

Mrkim,
1. Setup Mesh on your PC.
2. Setup a folder to share in Mesh
3. Go to http://m.Mesh.com on your Dash
Works when you're home or away!
Rich

can you download from an ftp off of the dash?
If so why not set up a simple ftp and download localy? using 192.168.x.x addres that way you would be on the lan

Do0zman said:
can you download from an ftp off of the dash?
If so why not set up a simple ftp and download localy? using 192.168.x.x addres that way you would be on the lan
Click to expand...
Click to collapse
yes...hence why we have suggested to get an ftp client for the phone and set up the pc as the server on the local side.

second for mesh.com. works great.

Mesh does not work for me; however, FTP server works great for me
Now, I can connect to my desktop folder from my Dash.
Thanks to you all.