I've noticed question mark on italian keyboard is missing... (see the pic attached) ...but it is on the WWE version...
The italian owners have to use the virtual keyboard for question mark... That's quite weird...
Does anybody know how to remap the TP2 hardware keyboard, to restore the question mark?
up
nobody knows how to remap qwerty keyboard?
Same here..
Same problem here also!
They're really stupid!!!
They could map every key to a special character..
W, R, T, S, D, F, Z, X, C, V are unused!
FN+D could put the question mark!
But no.. STUPID HTC!!!!
I solved by myself.
Solution:
Put the attached file in the Windows folder.
Open a registry editor and go to:
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KeyboardLayouDlls]
Replace the entry containing
eT9.Rhodium.0410.kmap.txt
with
eT9.Rhodium.0410.kmap_new.txt
(basically add "_new" to use the new keyboard file)
power off and on again.
NOW:
FN+D (like "domanda") types "?"
and
FN+T (like "tab") types the tabulation char.
Hope this helps.
THANK you so much!
I'll try as soon as possible!
REP+++
You're welcome
Thanks, it works !!!!
This trick worked very fine, here!
Thank you!
does the other buttons remain the same on the kb?
sbraga said:
does the other buttons remain the same on the kb?
Click to expand...
Click to collapse
Yes, they remain the same
thanks, great work!
Thanks a lot LinoX!!!
It's great!
CIAO
I've cabbed a new version of this fix and I want to share...
Fn+D is still used for the question mark but I've added also some other unicode symbols...
Just install the cab attached at this post in the DEVICE MEMORY, perform a soft reset and you have done!
After the installation, for exemple, if you type FN+C you can obtain: " ♥ "
There are some other symbols added...
You can also use them for SMSing... just be sure your PRO2 has Unicode enabled:
You can check:
START
ALL PROGRAMS
MESSAGING
MENU
SETTINGS
SMS/MMS
THICK "USE UNICODE..."
NOTE:
If you use the unicode symbols the maximum lenght of the message will be 70 char... if you don't use them the max lenght will still be 160 char as usual
INSTALL THIS CAB ONLY ON HTC TOUCH PRO2 - ITALIAN VERSION
LinoX said:
Solution:
Put the attached file in the Windows folder.
Open a registry editor and go to:
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KeyboardLayouDlls]
Replace the entry containing
eT9.Rhodium.0410.kmap.txt
with
eT9.Rhodium.0410.kmap_new.txt
(basically add "_new" to use the new keyboard file)
power off and on again.
NOW:
FN+D (like "domanda") types "?"
and
FN+T (like "tab") types the tabulation char.
Hope this helps.
Click to expand...
Click to collapse
Hi.
I try this solution and FN+T works, but only as text tabulation.
I need the TAB key as "windows function" so to move from one selection to another.
Could you help me please??
Thanks
Related
Great ROM but I am having an issue with slide-out keyboard layout. The letters themselves all type correctly (both in small and CAPS) but when I use bottom left shift key to access punctuation some of the symbols are in the wrong place.
For Example:
Top row letters are:
QWERTYUIOP
Symbols listed on these keys are:
[email protected]/#123()
Symbols typed actually are:
[email protected]?/#123()
Thus the first 3 key symbols are incorrect in first row, there are 4 incorrect in the second and one in the third. Software keyboard works correctly.
Has anyone else had this problem?
OTHER QUICK UNRELATED QUESTION:
I really like the HTC Today Home Screen with the weather but my city is not listed on drop-down menu list. Is there a way to add a city not on list – on accuweather.com you can add city by zip.
clavace said:
Great ROM but I am having an issue with slide-out keyboard layout. The letters themselves all type correctly (both in small and CAPS) but when I use bottom left shift key to access punctuation some of the symbols are in the wrong place.
For Example:
Top row letters are:
QWERTYUIOP
Symbols listed on these keys are:
[email protected]/#123()
Symbols typed actually are:
[email protected]?/#123()
Thus the first 3 key symbols are incorrect in first row, there are 4 incorrect in the second and one in the third. Software keyboard works correctly.
Has anyone else had this problem?
OTHER QUICK UNRELATED QUESTION:
I really like the HTC Today Home Screen with the weather but my city is not listed on drop-down menu list. Is there a way to add a city not on list – on accuweather.com you can add city by zip.
Click to expand...
Click to collapse
the layout needs to be changed to USA.. load HTCustom 1.5 and change the layout to English or search on here for a 8525 WXML keyboard.cab
Thanx Jakeypoo
I am a bit of a newbee here. Can you give me more spicific instructions including where to find the correct cab file?
install, softreset, bam
No change?
At the risk of being stupid...this is what I did:
Extracted files to desktop
Moved them to a folder in my documents in the 8525 (8 total files)
clicked on setup file
I saw a list of characteristics run
softboot
bam...no change?
no... copy the .cab file to your phone and click on it thru file explorer on the phone and it will install..
Worked!
Thank you so much!
Wow
Says a lot for this site when someone is able to get a rom, and flash their phone without even knowing how to run a .cab file. I am impressed.
Second that one bro. Cab file? well ive never heard of such a thing.
lol for real
i couldnt ignore this one..
But whats a cab file, and you want me to put that where?!?
shogunmark said:
i couldnt ignore this one..
But whats a cab file, and you want me to put that where?!?
Click to expand...
Click to collapse
There's no need for that grinning smiley Shogun we all know you're hoping somebody will help you out with an answer to that question
Mike
Dear Forum,
I have a HTC Touch Diamond. Successfuly Flashed to: 1.93.407.1 GER
Everything works fine, just the 2 Softkys on home are phone for the left and programs for the right.
I have tried to change with different Programs, also in registry, but in registry there are no values for the keys. So I would have the contacts on the left and com manager on the right.
Anyone could help me please to change the remaps?
I have tried almost all, the search have shown me, but without success!
Please help
Chieftechnican said:
Dear Forum,
I have a HTC Touch Diamond. Successfuly Flashed to: 1.93.407.1 GER
Everything works fine, just the 2 Softkys on home are phone for the left and programs for the right.
I have tried to change with different Programs, also in registry, but in registry there are no values for the keys. So I would have the contacts on the left and com manager on the right.
Anyone could help me please to change the remaps?
I have tried almost all, the search have shown me, but without success!
Please help
Click to expand...
Click to collapse
Try SSmaPA
I Installed the program, but have no idea, how to change the softkey settings... How this will work?
Araldwenn said:
Try SSmaPA
Click to expand...
Click to collapse
I think SSmaPA is not intended for that. I use it to remap the tabs of HTC Home Touch Flo (for example, i prefer to open IExplore instead of Opera, when licking on Browser tab)
To do waht you want search the forum for a thread named somithing like : "manila teaks" or similar
You have to work on registry: HKLM/Software/HTC/Manila ... and then writing what you want for HomeLSKPath, HomeLSKText, HomeRSKPath and HomeRSKText
You find it on that thread. Good luck
set the path to link to the comm and contacts shortcuts in your start menu. Device/Windows/Start menu/... something like that.
pasil.pt said:
I think SSmaPA is not intended for that. I use it to remap the tabs of HTC Home Touch Flo (for example, i prefer to open IExplore instead of Opera, when licking on Browser tab)
To do waht you want search the forum for a thread named somithing like : "manila teaks" or similar
You have to work on registry: HKLM/Software/HTC/Manila ... and then writing what you want for HomeLSKPath, HomeLSKText, HomeRSKPath and HomeRSKText
You find it on that thread. Good luck
Click to expand...
Click to collapse
NB - Bad idea to lick the browser tab licking on tab may cause undesired system behavior LOL
I was wondering if there had been a thread dedicated towards various keyboards or not.. so I thought I would start one. I've read a few things spread out about keyboards but nothing dedicated.
on that note: is someone who is capable of creating a keyboard, much like the iphone style (keys spaced out, not cramped together for people with fat fingers [like myself] and fewer buttons) be willing make one for all of us to benefit...?
thanks!
I have had the PCM keyboard (v0.14) installed, but it messed up the default HTC keyboard. Still don't know how or why that happened.
Turned out I liked the HTC better, so deleted all other keyboards I had
Still waiting for a Swype-like keyboard to try.
Grtz,
Thijs
you could try the resco keyboard. It is great... apart from it having no comma and period on the first page, making it still very slow to work with for me.
that swype looks great
i like the Yota keyboard, looks ideal for people with sausage hands like me
I'll have to give those a try, it seems there are too many buttons on the reg qwerty pad.
next question, how do I change it?
Garfoid said:
that swype looks great
i like the Yota keyboard, looks ideal for people with sausage hands like me
Click to expand...
Click to collapse
Yep, but that Yota keyboard hasn't been extracted yet.
Hope somebody is capable of doing this!
thijs84 said:
I have had the PCM keyboard (v0.14) installed, but it messed up the default HTC keyboard. Still don't know how or why that happened.
Turned out I liked the HTC better, so deleted all other keyboards I had
Still waiting for a Swype-like keyboard to try.
Grtz,
Thijs
Click to expand...
Click to collapse
Try the Shapewriter...works on same technology of swype...although i didnt like it personally...numpad was too cramped...but u might like it since u mentioned swype...swype does look appealing
right now am using SPB and Resco pretty good but sometimes when you tap a letter it doesnt appear.. its like it has a delay or something! but i do wish someone makes sometimes that works good!
PCMK kills them all. Without a doubt.
Tene is also adding gesture support in the next version here, and you can add cursor buttons (left right up down) as in HTC keyboard for navi. Easily the best, I have tried I think just about all sips.
Fully skinnable and you can also change the layout to just how you want. Would highly recommend it.
pocketcm.com
I found it a bit slow and the autocomplete shows only one option. plus the feedback didn't appear instantly as it should.
Kizmet said:
I found it a bit slow and the autocomplete shows only one option. plus the feedback didn't appear instantly as it should.
Click to expand...
Click to collapse
How recently have you tried it?
.23 has none of those issues...
Swype seems cool, does anybody have any idea on when the public version will come out? It seems like you can have them contact you when the beta version comes out...
my self keyboard
I'm using self create keyboard, that looks like iphone. Have maximum configuration (but editing skin file in which all buttons and logic described)
At now it's with EN and RU layouts.
Unpack archive to Program files, run Register.exe and select Fingerkeyb.dll file with full path. Press register button to register keyboard.
Also keyboard can hover over buttom bar to incrase screen free space (ChildWnd parameter in skin file)
Skin file located in Skins\Skin.txt, be careful skin file must be in unicode format, also at now only Portrait orientation supported.
Keyboard developed for self only and have a bit of documentation, all info in file Skins\KEY-OPS.TXT which describes format of skin.txt format
See screenshots.
Landscape upgrade here
exidler said:
I'm using self create keyboard, that looks like iphone. Have maximum configuration (but editing skin file in which all buttons and logic described)
At now it's with EN and RU layouts.
Unpack archive to Program files, run Register.exe and select Fingerkeyb.dll file with full path. Press register button to register keyboard.
Also keyboard can hover over buttom bar to incrase screen free space (ChildWnd parameter in skin file)
Skin file located in Skins\Skin.txt, be careful skin file must be in unicode format, also at now only Portrait orientation supported.
Keyboard developed for self only and have a bit of documentation, all info in file Skins\KEY-OPS.TXT which describes format of skin.txt format
See screenshots.
Click to expand...
Click to collapse
Wow really you just made this? Awesome I will have to give it a try sometime...have a cab for easier installation?
exidler said:
I'm using self create keyboard, that looks like iphone. Have maximum configuration (but editing skin file in which all buttons and logic described)
At now it's with EN and RU layouts.
Unpack archive to Program files, run Register.exe and select Fingerkeyb.dll file with full path. Press register button to register keyboard.
Also keyboard can hover over buttom bar to incrase screen free space (ChildWnd parameter in skin file)
Skin file located in Skins\Skin.txt, be careful skin file must be in unicode format, also at now only Portrait orientation supported.
Keyboard developed for self only and have a bit of documentation, all info in file Skins\KEY-OPS.TXT which describes format of skin.txt format
See screenshots.
Click to expand...
Click to collapse
Great Keyboard Works pretty fast...
Can you creat one with swiss-german qwert layout plz?
Thx and greetz
Kizmet said:
I found it a bit slow and the autocomplete shows only one option. plus the feedback didn't appear instantly as it should.
Click to expand...
Click to collapse
Hi, I also found that you really have to press the screen hard for the feedback to work, you can still press the letter and it appears on the screen but no feedback unless pressed hard??
Also no full stop on the front page??
I am using the latest version which i think is .23??
As coming from an iPhone i really like this keyboard so hope the bugs are ironed out
hi
how do install this keyboard?? ive tried the above guide but it doesnt register i press the register tab and it doesnt do anything. please can you upload a cab file for us noobs. please help this looks very nice
morgin187 said:
how do install this keyboard??
Click to expand...
Click to collapse
Save attached exe to the same directory on phone, where fingerkeyb.dll exist and run program. After successful registration keyboard must show in keyboard list.
Fre4k said:
Can you create one with swiss-german qwert layout plz?
Click to expand...
Click to collapse
I have not how layout located physically and also not so much free time.
You can make it and share for other peoples!
If you have interest with creating new layouts, i can help you with additional questions. (Look current implementation of en-ru layouts
exidler said:
I'm using self create keyboard, that looks like iphone. Have maximum configuration (but editing skin file in which all buttons and logic described)
At now it's with EN and RU layouts.
Unpack archive to Program files, run Register.exe and select Fingerkeyb.dll file with full path. Press register button to register keyboard.
Also keyboard can hover over buttom bar to incrase screen free space (ChildWnd parameter in skin file)
Skin file located in Skins\Skin.txt, be careful skin file must be in unicode format, also at now only Portrait orientation supported.
Keyboard developed for self only and have a bit of documentation, all info in file Skins\KEY-OPS.TXT which describes format of skin.txt format
See screenshots.
Click to expand...
Click to collapse
i think your keyboard is amazing! i hope to see a version who work also in landscape!
Hi all
I've come over from the TP to the TP2 and I'm really missing the TAB key on the keyboard. Used it a bit. Is there anyway to map another key (maybe via FN) to perform the TAB function?
If you are just looking to move your text cursor between fields, the directional arrow buttons will do the job.
ohyeahar said:
If you are just looking to move your text cursor between fields, the directional arrow buttons will do the job.
Click to expand...
Click to collapse
I must maybe try that again... I've tried it before but it didn't always work.
Nope it doesn't work... problem is that when I'm in a block that has figures in it it will go forward in the same block instead of going to the next block. Anyone else with same other ideas?
take a look here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Rhodium/ChangingKeyboardLayout
edit the file eT9.Rhodium.409.kmap.txt this way:
change this row:
{T T T T T 0x04}
in this row:
{T T T 0x09 0x09 0x04}
save the file as unicode and copy it to windows folder
now for tab key just type FN + T
Think I'm missing something. I've looked at the registry key and it says I'm using: eT9.Rhodium.www.kmap.txt but when I change this file absolutely nothing happens?? Should I still be chaning: eT9.Rhodium.409.kmap.txt although this is not the one according to my registry?
i did this mod time ago, but in my old touch pro the tab key did change between input fields, in touch pro 2 it only add a bounch of spaces (like when in text insertion) and doesn't switch fields...
is there a way to change the behaviour?
Need a Tab Button on touch pro2...
I have the same problem i need a tab button. I read in another thread how they remapped the Fn+t to = the tab but i dont think it is for the touch pro2
when i load the (eT9.Rhodium.www.kmap.txt) file nothing happeans. i did read in the text you have to change it to a unicode file but i couldn't figure out how to do that. Also many people have replied that you can use the arrow keys but as stated by "pieterbotes" if you are in a field for Example "typing in your name" you cannot move to another field for example " your password" with the arrow keys it the same thing on a Pc Keyboard only a tab button will allow you to do that. So if any of the great minds on this site have a answer it would be greatly appricated.
And does anyone agree that fn+q would be better than fn+t since the q is close to where the tab would be?
Thank You.
Duane
Don't know if you're interested, but i've found that Keyboard Config is pretty useful for stuff like this.
Sublimedelta9 said:
Don't know if you're interested, but i've found that Keyboard Config is pretty useful for stuff like this.
Click to expand...
Click to collapse
thanks...using your program fixed the problem for me...setting as tab fn+t using your program make the tab work as it should, changing beetween fields.
airon11 said:
thanks...using your program fixed the problem for me...setting as tab fn+t using your program make the tab work as it should, changing beetween fields.
Click to expand...
Click to collapse
Glad it worked for you, but credit should go to Tarkim; It's his creation.
Sublimedelta9 said:
Glad it worked for you, but credit should go to Tarkim; It's his creation.
Click to expand...
Click to collapse
thanks anyway for pointing me to it..
anyway reading the thread i don't know why i was sure you was the programmer..maybe i misread a post..
=)
airon11 said:
thanks...using your program fixed the problem for me...setting as tab fn+t using your program make the tab work as it should, changing beetween fields.
Click to expand...
Click to collapse
Could you please copy and paste here the eT9.Rhodium.409.kmap.txt file content?
This .txt file is located in /Windows folder... check also if it exist another eT9...txt file...
I'm interested notably in this row: {T T T x x 0x04} (what's instead X?)
THANK YOU SO MUCH!!
it' {T T T 0x09 0x09 0x04}
but i edited it.
in that way you have the tab key but it add spaces and does not change fields..
using the key remapper instead and sendink the keystroke to the os works as expected...
That program works brilliant. Thanks.
occasionally the built in keyboard shows me a different than expected keyboard. For example, durring txt messages, it would show the phone keypad "with the 1-9, P, w keys" or it would show the internet one "with .com button". I tryed looking through the registry for it, but its a mess tryn to find the key that was changed. i have the touch input v2.0 (build 35555) on the AT&T rom.
If anyone else has had this problem and knows how to solve it, the help would be amazing.
p.s. on my previous phone, I had the VITO Zoomboard, but i like the way this new keyboard is in how it changes..but not when it changes to something that isn't appropriate for the given event
Did you install the classic word completion or word correction cab? If so,
GoodThings2Life said:
When enabling Classic Word Correction, Opera users may experience an issue in which the soft keyboard gets stuck in web or numeric mode. To avoid/correct this, click on the web page instead of the address bar before exiting Opera.
Click to expand...
Click to collapse
I installed the disable xt9 file which changes registry values?
Just now I used the resco registry explorer to extract my reg files and found which keys changed:
=== normal keyboard ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000000
=== web keyboard ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000006
=== numeric keypad ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000006
now I gata find a program which will make an exe or lnk to change that value of the reg
I have the exact same issue. The phone seems to get stuck on the number keypad with the W and P and will not go back to the full qwerty.
Soft resets do nothing to reset keyboard. I did the following edits to get word suggestion:
Go to: HKLM\System\CurrentControlSet\Control\layouts\e001 0409
Edit: Ime File = \Windows\compime.dll
Layout Text = COMP IME
Go to: HKLM\Software\Tegic\eT9
Edit: XT9SupportMSSip= 0
Otherwise I have done no registry edits except removing proxy info for Opera to get it to work on Rogers.
This is most annoying so any suggestions or help would be appreciated.
I have tried using opera page before exiting but it still comes up as a number pad.
Applies to any HTC Touch Input 2.0 keyboard
baudac said:
Did you install the classic word completion or word correction cab? If so,
Click to expand...
Click to collapse
Thanks for this ... you really helped me save a lot of time!
I find that it will also flip to this input style when trying to add a contact. Once it does this I then have to go and start opera, touch the address bar and the input changes back to qwerty. Then I can exit opera. Its kind of a pain but at least I know of the work around.
thanks for the opera info - I did not install any completion cab, but this did fix my keyboard issue.
I just got this problem today. I have yet to be able to change it back.
I can tell you that this occurred in the Windows Edit Contacts menu (that is to say, go to HTC's "Edit Contacts" and select "More").
At first it gave me a simple numbers and arrow keys only keypad. I soft reset and it changed nothing. I then decided to retrace my steps to try to fix it, so I went back to the edit contacts screen and fiddled around, very shortly it switched to the keyboard as described by the OP. Numeric keys, parenthesis, a 'P' and a 'W', etc... stuff used in phone numbers, I suppose. I haven't been able to get it back to a full keyboard, yet. I've messed around with the keyboard options, switched to and back from other keyboard choices and got nothing.
Anyone else want to investigate this further with us?
xperia
zyphuris55 said:
I installed the disable xt9 file which changes registry values?
Just now I used the resco registry explorer to extract my reg files and found which keys changed:
=== normal keyboard ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000000
=== web keyboard ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000006
=== numeric keypad ===
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Ime]
"CurrentET9Style"=dword:00000006
now I gata find a program which will make an exe or lnk to change that value of the reg
Click to expand...
Click to collapse
This worked for me.. The opera trick did not
SlyMaelstrom said:
I just got this problem today. I have yet to be able to change it back.
I can tell you that this occurred in the Windows Edit Contacts menu (that is to say, go to HTC's "Edit Contacts" and select "More").
At first it gave me a simple numbers and arrow keys only keypad. I soft reset and it changed nothing. I then decided to retrace my steps to try to fix it, so I went back to the edit contacts screen and fiddled around, very shortly it switched to the keyboard as described by the OP. Numeric keys, parenthesis, a 'P' and a 'W', etc... stuff used in phone numbers, I suppose. I haven't been able to get it back to a full keyboard, yet. I've messed around with the keyboard options, switched to and back from other keyboard choices and got nothing.Anyone else want to investigate this further with us?
Click to expand...
Click to collapse
Same problem for me, so I did the Opera method.
It definitely originated (for me) in "edit contacts".
I used the stock Opera (9?). I did try to just tap the google search bar with no luck.
Just click on the address bar after you start the browser and it will allow you to switch.
*Non-registry changin' noob method*