i am trying to send a file bluetooth it gives me all options except blue tooth(i get email,sms,etc) but no option for b t
also i get a bt message evrytime i try to connect to someone,think this is because i have tom tom on?
got it sorted if you hold down on the file it says send bluetooth, but if you click send in the mention option it only gives you email, or sms options bit strange
Related
Hi all
I have come across the problem that I can't send SMS larger than 160 chars after I upgraded to the "official" WM6. I am using the Swedish version on a HTC TyTN. When I try and send a message that is larger than the 160 chars i get a message saying (loosely translated from Swedish) Can't send SMS. After I click ok I also get notification on the bottom left part of the sms window saying synchronization error.
Has anyone else got the same problem and if so have anyone found a solution.
/Nicklas
Just to clarify...
I take it to mean that you could sent sms that were over 160 characters before you upgraded?
Because most of the providers that I know don't allow that.
Found something on the forums about this:
http://forum.xda-developers.com/showthread.php?t=293505
Hope it helps.
Yes I could since the SMS program automatically sends the large SMS in smaller parts.
Say I make an SMS with 203 chars then it would send it as 2 sms, one with the first 160 chars and then a second sms with 43 chars and when the SMS arrive to the recieving phone it will be put together if that phone is capable of that. Now days I think all phones can do this. Or at least should be able to do this but after the upgrade to WM6 this fails on my TyTN.
i guess the previous version of the SMS application was allowing what is called multiparts message, meaning it send as many SMS of 160 car regarding your text lengh but with no guarantee that the reviever will have them in the proper order
usually SMS is limited to 160 car
larsuck: Thanx for the link but nothing in that helped.
So if anyone else have any idea I would much appreciate it because it is a bit frustrating that it worked with wm5 and not with wm6 so far
Have you tried to take a look at DiStefano's Cab Collection? There is an Palm SMS application. You can try it with this application if it is possible on you're device. Its a small test!
Good luck
Well I found out how to fix it.
I did this:
Once upgraded settings need to be changed to ensure desired operation, on the device go to start>settings>connections(tab)>USB to PC, untick the box (Enable advanced network functionality) then exit back to the today screen.
Click to expand...
Click to collapse
??? Why would this have an effect on SMS limitations?
I don't know exactly why but what I did was that I hard reseted the unit and after that multipart sms worked as it should. Then I connected the usb cable and ActivSync wanted to reconfigure the settings so I went through the wizard. One of the questions I get is if I want to let internet calls and mms to be sent when the unit is connected and I choose that. Then I let the unit sync with my PC.
After that I couldn't send multipart sms again until I unticked the Enable advanced network functionality box
If anyone knows why this is please enlighten me
Hi
I thought it would be a good idea to start this thread to report bugs in the TP 2 official ROM so that we may collectively be able to find solutions, and if not, at least bring to attention of HTC to fix in newer builds of their ROMs.
So I request you all to put down bugs you have discovered as also fixes in this thread. I will try my best to collate all into the first post....
Here are the ones I have discovered so far:
ALARM BUG
I set the alarm one day and turned it off the next. But it continues to ring every day at the same time even though the alarm settings show it as off.
EXCESS RAM USAGE
With TF3d 2, messaging, notes and contacts running, the TP 2 shows RAM usage at 81%. Wonder whats taking up so much memory.
DIALER BUG
At times when I am calling, the call status screen does not appear and it continues to show the dialer screen even after the call button has been pressed for a contact.
I am having an issue with downloading emails on my TP2.
Using exactly the same settings as I had on my kaiser (which still works), when I try to send and receive I get "Error synchronising" Cannot connect with current connection settings.
I have ensured my email account is set up identically, and the connection settings to T-Mobile are identical. Anyone else had this issue?
Bluetooth:
When using bluetooth (activesync and headset profile) the pda crashes sometimes. If the screen is on it won't shut down and no interaction with the phone is possible. When it's off it stays off. Funny thing is that the pda keeps working. Phone is runnig when I am called etc.
Ramsfan_Jim said:
I am having an issue with downloading emails on my TP2.
Using exactly the same settings as I had on my kaiser (which still works), when I try to send and receive I get "Error synchronising" Cannot connect with current connection settings.
I have ensured my email account is set up identically, and the connection settings to T-Mobile are identical. Anyone else had this issue?
Click to expand...
Click to collapse
To answer my own question, this :-
[email protected]; said:
its something to do with their web proxy and only happens when you are connected to certain "bits" of tmobile.
To fix it, go to settings->all settings ->connections->connections->setup my proxy server-> and UNCHECK this network uses a proxy server to connect to the internet.
Click to expand...
Click to collapse
seems to have fixed it....
Sometimes the + caracter of a phonenumber is removed by touchflo3d when sending a textmessage as descriped here:
http://forum.xda-developers.com/showthread.php?t=522535
i have a problem with the alert tones. my tp2 either don't play or plays very softly the first second of any alert, reminder, or ringtones. anyone with the same problem?
I'm finding that when I send texts 1 out of every 3 doesn't get sent.
I get an 'Text cannot be sent' message. It's not my Sim card cause it was fine when I had it in the X1.
@home said:
I'm finding that when I send texts 1 out of every 3 doesn't get sent.
I get an 'Text cannot be sent' message. It's not my Sim card cause it was fine when I had it in the X1.
Click to expand...
Click to collapse
mine fails most of the time if i reply through the messages tab but if i select all messages and reply from there it always works.
bump123456
jjturner said:
mine fails most of the time if i reply through the messages tab but if i select all messages and reply from there it always works.
Click to expand...
Click to collapse
So does mine, so perhaps it's a touch flow bug rather than a phone fault.
these have nothing to do with htc touch pro2 itself dude!
it's about the rom you installed in it,so pls return to your technician to get a good rom!
it's like you have super good pc,but the windows xp you installed is crap,then your pc will always get this problem and that......
FYI: rom means: OS(wm 6.5 for example)+Radio(GSM etc)+Extrom(touchflo 3d etc)
SMS Status Report Bug
Hi,
I have a German (O2) htc touch pro 2 with the current original O2 ROM (WM6.1 CE OS 5.2.21048 (Build 21048.1.6.3), ROM: 1.19.207.1 (51489) GER)
My problem is that the phone will not receive or display the SMS status report sent by the provider when the recipient receives the sms.
When writing an SMS, I ensure that under message Options, there is a tick next to: "Request message delivery notification".
I wrote an SMS message to my own number on the TP2 and sent it off. The message promptly arrives, yet no status report from the provider arrives. I have tried this several times to various numbers.
The same SIM card in my XDA Orbit always displays a delivery notification from O2 when the recipient receives an sms. It is not a network problem.
As I have a multicard (more than one SIM card on the same number), I have been able to narrow down the problem as follows.
Messages sent from the phone do generate a status report. I set SMS delivery to my Orbit, and then sent an sms to my own number from the TP2. Both the message and the delivery report arrived on the Orbit.
When I set the network to send SMS messages to my TP2, and then send a message from my orbit, the message itself was delivered to the TP2, but not the status report!
This establishes that the German O2 network is OK, the TP2 can correctly send an SMS and request a Status report from the network. It can also receive normal SMS messages, but not the status report. No sign of it receiving anything, appears to ignore such status reports entirely.
Does anyone have a fix for this, short of flashing a different ROM on it.
I know that a new official WM 6.5 ROM is due to be released for the TP2 (but not so far). I am hoping someone here was a quick fix (missing registry entry, etc.) which can be applied to the current system as I write a lot of text messages and it is useful to know when they have arrived.
Regards
Peter
request delivery notification
i upgraded to the original WM6.5.. when replying to a text message through the new TouchFlo's threaded message look (not the one you get when going in from 'all messages' but the one you get when "clicking" on the message itfelf from the messages tab.), you can go to [Menu] - [Message Option] and there you have the option [reuest delivery notification].
i tick that and say done, send the message and i DO get the delivery notification. however when going back to this same message screen to reply to another message, that option will be unticked again.. i have to tick that option for EVERY single message that i reply to.. as i said sending a message from anywhere else has its own option and is saved correctly and always works..
i googled as much as i could but couldnt find anyone with the same problem :/
Hi all,
I have a pioneer BT unit in my car, it only accepts vcards send via bluetooth on the phone to create a phonebook on the unit.
I can send my contacts one to one to the pioneer unit by sending them as a v-card in the contacts app.
in my old phone (touch dual / niki) i was able to select multiple contacts and send them all together to my car-stereo. I can't find this option anywhere.
I installed bluetooth file transfer, which has the possibility to send multiple contacts, but that doesnt work on my desire, it hangs all the time and it messes up my bluetooth settings such that a connection could not be made with the app installed.
does anyone have any clue, or great app for this?
Well i'm having a MB bluetooth module in my car.
The problem i'm having is somewhat the same as above.
I can upload vcf cards one by one but that would take me ages. I can also go to: "contacts>import/export contacts>Share visible contacts>Bluetooth". When i do this, it always fails...
Anyone has a clue to this?
Regards
Mr H
When I get an MMS it does not download it (option to auto retrieve is set), instead the message is shown with a DOWNLOAD button, if I press this it says downloading but doesnt, sometimes the message will then show up minutes or hours later or not at all.
Anyone else having this problem?
Thanks!
edit: never mind, got confused due to multiple tabs, didn't read the thread title, didn't spot the Handcent bit.
lol No probs!
Still having this problem, can't send MMS's or receive them.
This is almost certainly due to your MMS settings. Check that they exactly match those for your service provider (menu -> settings -> wireless & networks -> mobile networks -> access point names).
I also thought this and had them resend the settings, in addition to that if they were wrong then I would never be able to send or receive MMS's.... Not just have a massive delay before/after sending/receiving!
Also this problem exists if I use the SE messaging app too not just Handcent.
From what I noticed this is due to the regular data-connection, as the regular data-connection needs to disconnect and the MMS connection going online to retreive the MMS.
I saw that at times the regular connection then tries to revert back since it went offline and thus killing the MMS transfer. If I connect to wifi the MMS will download instantly as the regular connection is down.
It's a shame that you cannot specify that MMS should be retreived over the normal data connection (yes I know a cost thing for many people).
I recall the X1 being able to set which connection to use for MMS, that was nice.
Hello. I'm wondering if anyone can assist me.
I have an Xperia Arc, running the most recent official Sony release. I have not 'rooted' or unlocked the 'phone, it is as it left the O2 shop. Plus the odd scratch or two...
When I am sent an MMS message, two annoying things happen.
1. The 'ringer' doesn't sound, the vibrator doesn't vibrate. If you happen to be looking, the light on the side of the 'phone flashes once, then nothing.
2. When I open the Messages App, the conversation relating to the person who sent the MMS message is at the top of the screen. If I open this conversation I see a blank message with the text 'Message not downloaded' in it. After a long period of time of clicking and tapping, I found that if I 'Long Click' the Message Not Downloaded notification, I get the option to download the message. Once I have manually selected the download option, the message is downloaded correctly, and once fully downloaded, the 'ringer' sounds as normal, along with any vibration.
I have no problem whatsoever in sending MMS messages.
Once the option to download has been selected, I have no problem receiving the message (apart from seeming rather slow).
I've seen threads that suggest checking or changing the APN settings, I would have thought that has to be working correctly, as sending and receiving messages works, if not automatically.
I did wonder if it might be due to being on a slow network, here at home we don't have fast O2 mobile coverage, no 3G, Edge or HSDPA here, just plain GPRS (G in status bar).
Is there a way of having the 'phone automatically download the MMS message and content?
in the first voice of the menu, i guess you can find where to download content for data and mms
Duplicate. Sorry.
CavinRay said:
in the first voice of the menu, i guess you can find where to download content for data and mms
Click to expand...
Click to collapse
I've checked all the menus I can think of, but can't see any download options. Is there a specific menu you are thinking of here CavinRay?
I had this issue before, I use handcent, and sorted it by opening up the stock message app and going into the options.
Look for something to do with 'push settings' and make sure it's selected.
Might not help but worth a shot mate.
Sent via subspace beacon from my Arc.
Lord Takyon said:
I had this issue before, I use handcent, and sorted it by opening up the stock message app and going into the options.
Look for something to do with 'push settings' and make sure it's selected.
Might not help but worth a shot mate.
Sent via subspace beacon from my Arc.
Click to expand...
Click to collapse
Thanks, I've just tried turning it off (it was already on) then exiting Messages, re-opening Messages and turning it back on.
I'll see if that has any effect on the confusion.