Hello,
i'll try out, the contection between the Touch Pro 2 and my TomTom G0 520 -
I start to connect both and it works until the internet connection confuguration - TomTom try out to conect to TomTom-Server and Touch Pro2 gives back the message: Sorry there is an Problem with the device.exe
can some help - does it works for somone?
Related
Having trouble with my installation of tom tom 3. I have paired and connected successfully numerous hands free kits to my spv M2000 and all work fine until I install Tom tom 3. After the installation I can no longer connect to any of the handsfree kits. I am remove them and pair them again but the connection fails after they are paired. This happens before I install my Bluetooth GPS receiver.
Tom tom works fine as does the GPS.
I have spoke to Tom tom who say that the software locks down the Com port (6). and that my handsfree kit may use the same port. Is there any way of setting the com port used by your handsfree kit? Or if anyone has any other suggestions
cheers
Onmartin
When I start tomtom, I ALWAYS lose the hands-free bluetooth connection. I simply switch off my Bluetooth earpiece & turn it back on again. It connects fine and works OK (well as good a BT gets on these devices).
You could try reconnecting to your car kit after tomtom has initialised. Simply press the today button and the use the BT manager to reconnect.
For this reason, I have reassigned a button to tomtom so that I can quickly switch back to it after connecting back to my headset
I use a simple O2 Bluetooth headset, not a full car-kit
Thanks, but I can't even start bluetooth handsfree once tom tom is installed. I have tried your method but still no joy in connecting. any other ideas??
nah, sorry; I can only say what works for me. But then again somebody more knowledgeable might be able to help, I'm a newbie myself
You need to reinstall the Bluetooth stack AFTER you have installed TT3 as TT3 overwrites 2 files to old (2003) ones (BtCoreIf.dll & BtSdkCE30.dll)
You can find the BT stack in the WiKi
Good luck!
thanks i'll give it a go and reort back
What a a star !!!! worked like a treat. thanks dutch
I've exactly the same problem.
Noob on the site - I've searched wiki but cannot find the BT stack as mentioned. Any chance of posting a link with instructions on how to update?
Cheerz
Chicago
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
Thankz Dutch
Followed the instructions when I got home this-afternoon - spot on - my BT earpiece is up and running again.
PS Just need a "hack" so the tomtom navigator instructions come through the BT earpiece now!
Thanks again
Chicago
Has this got anything to do with the message when starting TT3 "Cannot open com1 port does not exist"? I have had TT3 installed before no problem, but after unlocking XDA2 I cannot get the TT3 software to work due to this error message.
@chicago: try this version of wavedev.dll: http://www.thb-service.de/download/MDAIII/Wavedev.dll
@geoff247: you need to uncheck our IR incoming beam in Settings-Connections-Beam
Grtz,
DUTCH
"com1 does not exist" message disappeared with one click of "uncheck incoming IR beams" amazing! Thanks Dutch, TT3 works again!
Geoff
silly question, but where do you put the wavedev.dll ??
:?:
onmartin
Has anyone seen some competitive navigation software such as PocketMap Navigator USA (www.pocketmap.com) and OnCourse Navigator 4 (www.oncoursenavigator.com)? Until TomTom 5 comes out, 2004 is a step down and version 3 is just too slow and buggy.
@onmartin
In the windows directory - there is already a wavedev.dll file there which is hidden.
thanks dutch, but when I go to copy it I get access denied message. Tried a restart then copy but same happens. it says to check the file is not in use or write protected. it's not in use but I can't see it to see properties of file( i have set it to display all files) any ideas?
onmartin :?
Did you try this using ActiveSync (so on your desktop PC?)
Dutch, you are a genius!! thanks again
onmartin
Hi there,
i've just installed the Nokia 616 into my car. It's working fine with automatically connect via bluetooth and SAP if the phone is in reach.
BUT if the connection is closed the MDA doesn't reactivate his own telephon.
It's also impossible to reactivate phone with comm manager or something.
At this point the only solution is to softreset the MDA but this issn very satisfying.
There is another question about this combination:
Is it possible to synchronize the MDA-based address-book? The Nokia always copys the SIM-adrb only.
I've already tried jetway but this doenst also work. Maybe someone has any tricks ;-)
Thanks so far...
Hello,
for hours I have been trying to get ActiveSync to work with my Hermes (XDA Trion). Interestingly, everything worked fine with Schaps older ROM 3.54.
Actually, the problem can be split into two seperate problems:
1. When I try to pair my Hermes with my Notebook (MSI dongle with Bluesoleil 2.3) and I search for new devices, it discovers it. After I enter a passkey on the PPC a window pops open on the notebook. I punch in the same exact number as before but my PPC just stalls with the "hour clock" running. Sometimes I get a time out error after waiting about 5 minutes. If I don't enter a passkey I can pair the devices with no problem.
2. Once I have paired both devices (with no passkey) I can manage to refresh the offered services to ActiveSync. Nevertheless, I still get an error message that there is no existing Bluetooth partnership with a PC with ActiveSync support. Thus, I'm still not able to sync via bluetooth
If you have a solution, let me know!
Thanks!
sojakim
same HW no issues
I happen to have both the Hermes with Schap's 4.31 WWE Lite AND the MSI Bluesoleil BT 2.0 dongle as well, and bluetooth Activestink is no issue on my end. Works perfectly.
using 4.31 lite as well.. no issues with rgd to bluetooth connections with my HP tablet TC1100 (XP Pro Tablet Edition 2005)..
Hi, I am trying to get my MDA Compact & SPV M500 to recognise my Bluetooth GPS Unit I bought recently The Unit is A Copilot BT-GPS-365E50. My problem is, I installed Mobile Bluetooth Tools and it installed with no problems. It recognises my GPS Unit, but when pairing the devices the com port setup screen flashes for a moment then disappears. I therefore cannot setup a BT Serial Port. Any suggestions? Is it the GPS Unit? Is it not compatible with my MDA. I have tried this on both my Phones and get the same result. They are both HTC Magicians. I used this process on an XDA II with no problems. I just want to get my SatNav up and running. Hope myou can help and thanks for reading..
use nav n go Igo8
sirftech
Hi!
I also use iGO 8, ith connects automatically. If you like to use tomtom for instance, then I would use the SirfTech tool to establish the connection to your BT-GPS and then run your Nav applcation.
Cheers
Lui
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
radak23 said:
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
Click to expand...
Click to collapse
Hi, I am using my Touch Pro 2 with the same HU and Bluetooth adaptor as you but no such problem so far.
It used to have this problem then I try to connect using Window CE as the phone setup and choose another Connection Key instead of default 0000 to pair the phone with the HU.
ok, well i just tried connecting via searching for the device from the HU. it finds my device - i tap enter (to connect on HU) then it just jumps to a blue flashing 'connecting' then goes to a yellow 'error' straight away. if i select 'open' on the HU then it connects (connecting with a different ID - a number '6') but only untill i restart the HU.
also as a test i just tried an Xperia (just had one laying around LOL) and it does the exact same as mine!! ARRRRGHHH!
so im glad to say i believe it is not an HTC issue!
ok so i have an update - the problem is my HU will not pair correctly and it will not store a pairing. great.
another quick one - have found others are having trouble with their HU/adapters. thanks anyway everyone!
TP2 Bluetooth and voice dialing working fine ???
Have you tried to reset your carkit? I had the same problem after the rom-update with my TP1 and I put my carkit (Bury CC9060) back to factory settings. So I did the same this morning after I updated my TP2 and now it works just like a charm. Of course I don't know if your carkit has this possibility. Good luck, greetz Ton
'iznogoooog' - yes it work perfectly until you restart either device - 'ton66' - unfortunatley a reset is pretty much all i can do!!! eeeeek!
hopefully a reset will fix it! - i did unplug my b/tooth adapter then switch the unit on - then off then plug it back in.. didnt change anything.. oh well! will do complete re-set 2day!
BTW:
thanks so much for everyones help!
Got a questions. I am using the AVX-826 with build in Bluetooh. I want to know if you guys get the Signal Strength show on your Head unit is correct. on my unit pair with TP2. The Signal Strength indicator doesn't move. it always show the strength with my phone is connected to the unit and it stay that way.
The Battery Strength indicator does work and show the correct battery level.
I have exactly the same prob!
Hi,
I have a AXV800 and a BTA200.
My first device was a Artemis with WM6.0. No problem so far!
Then I changend to a Diamond with WM 6.1 and had the same problem as mentioned before. Now I tried my new TP2 and still the same problem.
And I tried the old Artemis again with a new 6.1 ROM and the same problem as on the other two phones.
Now I think it depends on the WM build. 6.0 seems to work 6.1 not!!!!!!!!!!
I did a reset on my AVX800 two times without luck!
I think I'm going to use a normal phone without Windows mobile for the next test!
Schelbi.