Hi,
1) Does anyone know how to set the SMS tone to ring twice ie: like nokia or SE default tones (I usually dont notice it ringing the first time)
and how to change SMS tones? I can't seem to find that option. Been searching around can't figure out the answer.
2) Similiar for the Alarm, How do I get it to repeat indefinitely? One short ring isn't enough to wake me up
Funny you started this topic,
last 2 days i slept over... so i came to late on my work.
I tried the alarm in the morning, and it rings, but one time...
i can't wake up by one ring...
Alarm - You can go into TF3D - Settings - System - Clock & Alarms and set the tone there to repeat. Although mine repeats on its own...?
SMS tone - Use an editor and copy and paste the tone after itself, that how Nokia tones are done, its not "repeated", its only played once, its just the actual file has the same repeated in it.
Yep, I got that.. Now is there any way to decrease the wait between "repeats"? There seems to be long wait between repeats and it only gets longer each time
i followed you instructions on how to get the alarm to repeat, but now it plays the tone then long silence then it will play it again. I'v tried this will all the preset tones an it does the same, is there a way to get the alarm to continually play, or a good alarm app that wont interfere with the tf3d on the tp2
I have the same problem with the default alarm that the delay between the alarm is just way too long. you can try klaxon or g-alarm (v1.5.1 is still free) as an alternative.
I use this
http://handheld.softpedia.com/get/Business/Clock/AlarmClock-5242.shtml
for alarm and have no problems
aiaob said:
Hi,
and how to change SMS tones? I can't seem to find that option. Been searching around can't figure out the answer.
Click to expand...
Click to collapse
Changing SMS tone is easy when you find it! If you go to Settings / Sound / Advanced / Notifications tab and select Messaging: New Text Message you can select the sound file you want etc.
Gordon
Related
Just earlier I noticed that my ringtones don't play. It wasn't vibrating aswell unless it was on the vibrate mode.
Now it seems to vibrate aswell normally.
But i'm still left with the problem where on an incoming call the ringtone doesn't play.
In "sounds and notifications" on the incoming call option when I press play nothing happens with whichever ringtone I select. However on other alerts its fine.
[EDIT] I've just realised that I can't chaange any option in Sounds and Notifications. Even when I press the OK button it loads but it doesn't close and no alerts or any notification changes. However I've tested some notifications just to see if the play button actually plays the tone that is selected and it does play but on incoming call alert I can't get anything to play. Either way whatever I change in SOUNDS AND NOTIFICATIONS I can't save it and I cant close it.
Very wierd....Any ideas..?
AND YES...I've soft reseted and tried.
AND NO.....I am not willing to reflash as Ive just got it setup the way I want and installed everything nicely and want to leave it the way it is..
Question: Did you install any other media play which might have re-assoicated the wav or audio defaults. This will cause the rings not to work.
Double post sorry
monz87 said:
Just earlier I noticed that my ringtones don't play. It wasn't vibrating aswell unless it was on the vibrate mode.
Now it seems to vibrate aswell normally.
But i'm still left with the problem where on an incoming call the ringtone doesn't play.
In "sounds and notifications" on the incoming call option when I press play nothing happens with whichever ringtone I select. However on other alerts its fine.
[EDIT] I've just realised that I can't chaange any option in Sounds and Notifications. Even when I press the OK button it loads but it doesn't close and no alerts or any notification changes. However I've tested some notifications just to see if the play button actually plays the tone that is selected and it does play but on incoming call alert I can't get anything to play. Either way whatever I change in SOUNDS AND NOTIFICATIONS I can't save it and I cant close it.
Very wierd....Any ideas..?
AND YES...I've soft reseted and tried.
AND NO.....I am not willing to reflash as Ive just got it setup the way I want and installed everything nicely and want to leave it the way it is..
Click to expand...
Click to collapse
Try this cab file it may work, if not you may need to hard reset that is the only way, you can always do a back up first.
I used the search engine and could not find a similar topic. Please excuse if this has already been asked.
Is there a way to use the alarm on the Artemis even when I have the "Silent" or "Vibrate only" profile selected.
I don't want to get woken up by incoming calls before my alarm sounds
Thanks in advance for some nice answers
PS: What exactly is the "automatic" profile ? What's its function ?
You may need 3rd party software for the job. Try PocketWakeup (freeware), that'll over write the volume settings and. give you a increase volume alarm. Takes a while to get used to it, but it is nice with a big snooze button, mp3 support etc.
triklops said:
I used the search engine and could not find a similar topic. Please excuse if this has already been asked.
Is there a way to use the alarm on the Artemis even when I have the "Silent" or "Vibrate only" profile selected.
I don't want to get woken up by incoming calls before my alarm sounds
Thanks in advance for some nice answers
PS: What exactly is the "automatic" profile ? What's its function ?
Click to expand...
Click to collapse
Hi,
the autamatic profile function disable all sounds if you have an appointment, and switch back the sounds after the end of the appointment. Obviously this activity is regarding to the calendar entries.
Why don't you switch off the phone during the night? Not the whole pda, just the phone function of it? In this case you don't have to change to silent or vibrate mode. The alarm will work and you don't have to wake up if a call is coming, because no call will coming...
zsitvayb said:
Hi,
the autamatic profile function disable all sounds if you have an appointment, and switch back the sounds after the end of the appointment. Obviously this activity is regarding to the calendar entries.
Why don't you switch off the phone during the night? Not the whole pda, just the phone function of it? In this case you don't have to change to silent or vibrate mode. The alarm will work and you don't have to wake up if a call is coming, because no call will coming...
Click to expand...
Click to collapse
Thats a nice idea
But I have made the experience that some short messages don't make their way when you shut off the phone. Sometimes they come some days later. But I'll give it a shot . Thanks !!
You should try PhoneAlarm. It's seems to be a little frowned upon, but my experiences are good. It has the option to turn off phone and message sounds but still enable notification.
Another (supposedly more stable) solution to your needs could be "Profiles for Windows Mobile" which is offering the same options like Phonealarm without skin support.
HTH
obii
Alarm tool
After a lot of alarm tools I found pTravelAlarm to be the best choice for me. Clean interface, snooze function with big snooze button, also works when device is locked (yes, some don't ). Big advantage is that you can use mp3's for your alarm sound and you can set the volume to wake you up, independent of the current volume.
Peter
triklops said:
I used the search engine and could not find a similar topic. Please excuse if this has already been asked.
Is there a way to use the alarm on the Artemis even when I have the "Silent" or "Vibrate only" profile selected.
I don't want to get woken up by incoming calls before my alarm sounds
Thanks in advance for some nice answers
PS: What exactly is the "automatic" profile ? What's its function ?
Click to expand...
Click to collapse
use the alarm i attached to artemis touch 2.1 thread - first post - it works when phone is in silent mode!
Hi all, I have an interesting problem...when my phone gets a text message, i hear the notification, but I also get the ringtone right after that....not sure why...its probably some setting somewhere, but no clue..ive looked and cant find anything...any ideas?....kind of annoying to get a short beep from a text message followed by a loud and long ringtone throughout the day...lol.....
Disable all notifications in the stock sms app.
I'm guessing you have more than one sms app.
It doesn't matter what I do. I've tried every single thing I've found on here. No matter what I set the notification sounds to in handcent & gmail, the notification sound that plays is the system default notification sound. Even if I set it to silent the default always plays. I want to be able to distinguish the difference of when I get a text & an email. Someone please help!!! I've been sitting here for over 3 hours trying to get this to work right. What can I do to fix this?
Heya,
so, as the title says, I'm having issues muting the notification and app sounds, while still allowing phone calls to get through and ring the phone out loud.
In the past, this was achievable by the Do Not Disturb mode. Right now however, it doesn't mute notifications anymore, as that is now done by the new "silent" mode. But that one also mutes incoming calls, which is completely unusable for me (I have occasional on-call nights when I need to be available on my phone, even if I'm sleeping, yet find the constant pinging of the apps super annoying).
The only working solution I found was to go into notification settings and block notifications from most of the very frequent apps... Which is annoying, as I also have to not forget to toggle the notifications back the next day.
Is there still a way to achieve the "Mute media and notifications, keep calls" combo in Android 12 + MIUI 13? Thanks!
On most phones the phone ringtone and notification volume is separate, is that not the case in your device?
Confused Gamer said:
On most phones the phone ringtone and notification volume is separate, is that not the case in your device?
Click to expand...
Click to collapse
Unfortunately not, instead, I have media, calls and alarm clock (as seen in the screen).
If I mute media, I still get notification and call sounds. If I mute the bell, I no longer get either. Dnd has no effect on the notification sounds.
Aldenar said:
Unfortunately not, instead, I have media, calls and alarm clock (as seen in the screen).
If I mute media, I still get notification and call sounds. If I mute the bell, I no longer get either. Dnd has no effect on the notification sounds.
Click to expand...
Click to collapse
This certainly sucks, can't every smartphone company share good things from each other instead of adopting all the bad changes. look around on Google maybe there are apps for this.
Aldenar said:
Unfortunately not, instead, I have media, calls and alarm clock (as seen in the screen).
If I mute media, I still get notification and call sounds. If I mute the bell, I no longer get either. Dnd has no effect on the notification sounds.
Click to expand...
Click to collapse
Hey have you found any solution? As I'm also struggling with same problem
It sucks, but until they fix it, you can use this app.
On the downside, it not only mutes sound, but completely mutes the notification including the badges , though. Anyone please post if you have a better solution.
i know im late. but i found a fix. (kinda) if you remove your notification sound completely. through settings, notifications and vobrations, notification sound and then while in the themes app. ringtone, and then no romg tone. even tho i thaught it changed the ringtone. if you go through settings first. ot will change the notification sound and not the ringtone. hope this helped
While waiting patiently for A13 ROMs for my current daily driver to mature a bit more I am using a silent audio file for the notification sound. I can't believe all these years MIUI still doesn't have an option to unlink calls and notification volume.