[Program \Lokiwiz.bat blows up at the operation:
Copying C:\Lokiwiz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
and returns the error message:
"Could not update itsutils.dll to the current version, maybe it is inuse? try restarting your device, or restart activesync or maybe your device is application-locked."
I have restarted device and activesync but no luck. As for the device being "application-locked", I don't think so but don't know how to confirm that.
SOMEBODY, PLEASE HELP!!![/SIZE][/FONT]
Fuhgeddaboudid
Problem solved! Used totally different approach with WST. Now up and running in WM 6 but fighting resistance from Synch. Will struggle a while longer before sending Mayday calls.
Related
I upgraded my 85' with the "official" wm6 rom and now I cannot go to other roms. The process was solid, meaning I was fully charged, no power loss, and it was synced. I've tried every version of rom available and get the same results. I went through the "brick" thread and I'm affraid I don't quite fit into any category. I can get phone calls and everything works, I just happen to like all of the great ROM's everybody is cooking and want to try them to see which one I favor. I tried using the Hard-SPL and all of the other bootloaders out there and I always get that ERROR [206]. I've tried to restart the machine, and hard reset the 85'. Any good idea's.... Maybe I need to search more? I'll try that.
==============================================================================
UPDATE:
What I should really do is rent a gun, and buy a bullet...
I'm not saying I'm some sort of season veteran of flashing... but I've never had to touch anything after I accept all terms. For some reason, when it came down to the last "Next" form, my phone flashes "Accept" super fast. So what to do?... I push "Yes" soft key fast as I can and it runs like grease lightening... I had to choose SS for the boot loader because it couldn't figure it out... Maybe next time around.
Have you tried to flash a coocked ROM using the microSD card?
Hi,
did you try get your phone in the tri color bootloader screen and then running the Hard SPL program again?
I did not try to do flash it woth the MicroSD card... I just found out that I could flash it with the MicroSD card about 2 seconds ago. And I wanted to Hard-SPL at the tri-color as a last result in fear of bricking but everything is okay now. As I said before, I've never had to touch my 85' while flashing the rom, it just did it on it's own, but that "official" rom was not about being neglected. And then when I saw it flash something and say "yes", I pushed it and never looked back. It's alllllllllllllllllll good.
I do have one question, is the SSPL preferred over the other choices? Or is there one that is recommended?
Hi joshkrajnak,
How did you solve this problem exactly cos I dont understand what your saying:
http://forum.xda-developers.com/showthread.php?t=298640
boz said:
I extracted these error codes from a Hermes rom upgrade 'read me' document, these should be of help if you get an error message during a rom upgrade. They should be common to all roms, please correct me if I am wrong.
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
ERROR [206] : MEMORY ALLOCATION
ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
ERROR [212] : FILE CREATE
ERROR [214] : FILE WRITE
ERROR [222, 224] : DEVICE NOT RESPONDING
These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the Mobile Device is corrupt. Download the whole RUU and try again.
ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
ERROR [330] : ROM IMAGE ERROR
This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.
Click to expand...
Click to collapse
To Clarify: Whenever I went to upgrade my 85' to a different ROM, it wouldn't recognize my bootloader, and then after selecting any of the options, it would give the "ERROR [206]" message and fail miserably with any rom.
What I did to correct it was this: On the "official release" whenever I went to upgrade the ROM, the 85' would show a message at the bottom, the same as any "Notification" would giving me the option to either "confirm" or "dismiss". I did not notice the messages up until it caught my attention out of the corner of my eye on the very last attempt. The messages would quickly appear and disappear, so when the time came and it stated:
Current Rom: 3.25.###.###
Upgrade: 1.##.###
I had to press a confirm notification to continue on or I would get the "206" error message. The quote posted by Binyo is correct, but it does not apply in my situation.
ERROR [206] : MEMORY ALLOCATION
ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
Although that may be true that some applications may interfere with the upgrade process, I had turned off all applications and killed any services during this process.
I have an 8525 and I am trying to upgrade to HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108.exe and I keep getting the same error message. "Error 264 The Update Utility cannot connect to your PDA Phone. Please check that your USB/cable is connected properly between the PC and your PDA Phone " My phone is connected and everythign appears fine until I try try to update. I have even tried the guide at http://www.mrvanx.org and that doesn't work either. Any ideas?
Invalid Vendor ID
O.k. I am a little further. It starts the install and then I get the "Invalid Vendor ID" error message.
Do you have activesync installed on your pc?
Are u using vista or xp?
I'm also having a problem trying to upgrade to WM6. Whenever I start the process it switches my phone into standby then as activesync can't see the phone I get an error message!
What are your answers to the two questions above? Running vista or xp? What version of activesync if any are you running?
Are your phones unlocked, CID, etc?
I don't know if it is required or not for a "official update" but have you installed HardSPL?
On another note, I would post this question into the parent thread for the rom that you are trying to install, that way you may get more looks. Good luck
Running Windows XP with Activesync 4.5 not sure about SPL?! How can i find out?
See here, http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
Read over all of this, in Re: to the hardspl, i believe its the first hyperlink listed.
Assuming that you are set on that particular rom, what I'd do is extract the rom file from the package you downloaded using winrar and then use customruu to load it on. Ive' never had any problems with it on XP. This protects against bricking as much as possible. Also just in case you haven't seen this before, flashing roms and hardspl from here will void your warranty if you need to have it serviced at any time. There is a way to get back to warranty acceptable 'standards' though. But you can't take it in as is.
Hi friends,
I got HTC S620 Smartphone from my brother US. It was working well for the past 6 months and i updated to WM6 also now suddenly it got corrupted and shows the following error. It takes 30 min to boot and hangs with this following error. i Unable to do anything. I tried to update WM6 again but same still same error. I gave it to HTC service center in chennai and he unable to resolve this problem. And I Unable to open folder with usb cable. Any one please help me.
t-zones
While retriving the URL :
http://wap.t.zones.com
the following error occured:
Network error 19:
The Attempt to connect to the server failed
More Information Try Again
Alert
Cannot Start 'winwapexe'. A critical component
is either missing or failed due to low memory.
Try to upgrade to the HTC rom, it should be in this forum and I think its the second one on this page... Just look up and you should see the guide to upgrading your rom...
Read the topic that says guide to upgrading from WM 5 to WM 6 (or something along those lines)...
Hi I already Installed WM6 and after this problem again i done WM6 update. I have a doubt with this update. And i Unable to Open Windows Mobile folders from my computer also Active Sync unable to connect with Mobile. But i can receive the call and make answer to them sometime( even Hanging condition).
Okay, I've searched alot to get this thing solved. When I try to update my rom, the update starts normally, but then my telephone screen turns black, my gets disconnected, windows tells me it has found new hardware. The update failes and returns error 260 (connection lost). When I soft-reset the telephone afterwards, it returns to it's old shape.
Info about my telephone.
Rom: 1.93.404.1 NLD
Radio: 1.0025.05
PC: Windows XP SP 3, Active Sync 4.5
I tried to update with this rom: RUU_Diamond_HTC_NLD_2.03.404.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I also tried to update to Hard-SPL but that gave me the same error.
PLease guys does anyone of you know how to fix this? (personally I think it's windows xp which is screwing up).
Thanks in advance, I appreciate all help.
Yours, Martijn.
Even the tiniest tip may help (A)
I had the same trouble with that rom, I tried from internal memory and it worked. Search the wiki I am sure the info is there.
"ERROR [260] : UPDATE ERROR
This error occurs when there is an "open port error" before upgrading the CE ROM image. Solution: You can reset the device and run RUU again. If you still encounter an "OPEN PORT ERROR" again, reset your computer and try again."
This is what the WIKI tells me. But I have tried that. How did you manage to perform the update on the internal storage? Because I tried that with hard-spl but it wouldn't work.
Besides I only have .exe files for the Hard-Spl and the official rom from HTC.
Thanks for your reply though.
EDIT PART, just read this on another thread in the wiki:
ERROR 260 (Update Error):
"Your phone is not connected to ActiveSync. Check your connection or restart the phone. Also make sure in ActiveSync that "Allow USB connections" is checked (under File->Connection Settings). If this still doesn't help, then remove the memory card and SIM card before flashing."
I'm going to try this now, if it worked, I'll let you know
Just found out I have a CDMA version or something, I'll try google for the problem now.
Get the rom image from your temp directory and look here, found in the wiki
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
dickenz said:
Does the hardware install incorrectly? My laptop did this on XP.
XP would find the new hardware, my bootloader would say USB. Then it'd tell me new hardware could not be installed properly and from there my phone suffered those symptoms - Back to where I was. Funnily enough it eventually fixed itself.
Click to expand...
Click to collapse
It looks alot like your problem yes. But last time the hardware installed correctly, then the patch I found for CDMA models on ppcgeeks failed, and my telephone got bricked. So I'll need to get that fixed first. After that I'll sure think twice before I try another rom update :/
Thanks for all the help though, and I have to advice everyone to not use the hard-spl for cmda users from ppcgeeks unless you're 100% sure it fits your model!
Hi i am new on this forum ,i have a qtek 9090 unlocked bought on ebay
it runs windows 2003 and when i try to upgrade to wm6 ,the process starts and and it goes into USB V2.08 and pc makes a usb has been removed sound and the installer gives me a error msg
ERROR 120:COUNTRY ID: ERROR
and when i do a soft reset it comes up with a new installtion of (wm2003 which i hate)
this is getting to my head as i need to upgrade my PDA
can anyone help me
send me some links with the correct software and stuff please
you need to put the device in bootloader mode before connecting it to the pc by pressing reset+power+record and use the MAupgradeut_noID instead of the BAupgradeut to upgrade your device. if you don't have the MAupgrade tool present, you can download it from this post of mine:
http://forum.xda-developers.com/showpost.php?p=3768875&postcount=3
by doing these 2 points, you can avoid all error 101, 110 and 120
windows 6 for qtek 9090
does anyone have links to the new wm6 for qtek 9090
try this: http://forum.xda-developers.com/showthread.php?t=482997
No service
upgrade done and the phone worked for about 3 days now is says no service and wont pick a network
first make sure you didn't soft-reset the device the wrong way, meaning restarting the device by releasing the battery lock, because restarting it like that generally starts the device w/o radio, meaning no phone function. to avoid that, simply soft reset again by pressing the actual hardware reset pin.
in second thought, you might wanna post the values shown in the boot screen, maybe another radio rom might do the trick.
if neither of that worked, maybe you should try another sim card or a different location for testing network coverage just to figure out, if it might have something to do with a network failure.
if still however nothing worked, which i wouldn't hope, it still could be a bug with the particular rom and you might try another rom.
and at last, if that didn't help, you might have a broken radio receiver and as a harware fault would require you to repair or replace the device, but that is rather unlikely, so you are probably lucky and can fix it yourself.
please post back if and when you figured out, what the problem was, so we can all profit and learn off it.
with best regards,
Chef_Tony