Develop Bugs

Input method

Hi
I allmost allways use Phone Pad for text messaging and the Keyboard for Word documents. What I would like is to them assigned as default respectively, so that I don't have to change from one to the other everytime I open a different program. - Can it be done?
Regards
Søren

i believe wisbar advance 2 will help you to accomplish that. it has a feature that will change the SIP based on the title of the active program
good luck. let us know by posting your results here
regards,
peter733

Hi,
look there
http://www.ppcsg.com/lofiversion/index.php/t45727.html

peter733 said:
i believe wisbar advance 2 will help you to accomplish that. it has a feature that will change the SIP based on the title of the active program
good luck. let us know by posting your results here
regards,
peter733
Click to expand...
Click to collapse
Thanks, I'll take a look at it!
Søren

Sir1 said:
Hi
I allmost allways use Phone Pad for text messaging and the Keyboard for Word documents. What I would like is to them assigned as default respectively, so that I don't have to change from one to the other everytime I open a different program. - Can it be done?
Regards
Søren
Click to expand...
Click to collapse
Check out this app:
http://forum.xda-developers.com/showthread.php?t=271008&highlight=sipchange

Thanks for the answers. But there's still no solution to the problem: What I would like is to have the SIP change automaticly when I open a program. E.g. when I open any message program I want the Phone Pad; opening Note Pad the Transcriber, and Word the Keyboard.
I hope there's an ingenious programmer out there who can make, or has made, a small program that can do the job.
Regards
Søren

A very late reply: the requested functionality is impossible because several apps can be opened simultaneously and only one SIP can be 'active'.

Automatch contact in sms

Hi guys, I am appriciated to all of your works. But I just got one question.
Do you know how to enable automatch in sms when you write at "To:" in new sms? ( like wm6)
It is seem to be does not work any more in most of your rom. Its only work in Bepe 0.54 basic.
Thx very much.

etenx500 said:
Hi guys, I am appriciated to all of your works. But I just got one question.
Do you know how to enable automatch in sms when you write at "To:" in new sms? ( like wm6)
It is seem to be does not work any more in most of your rom. Its only work in Bepe 0.54 basic.
Thx very much.
Click to expand...
Click to collapse
its default in ALL of the basic Diamond ROMS. Simple make sure you are typing in the correct name and give it a second.

walshieau said:
its default in ALL of the basic Diamond ROMS. Simple make sure you are typing in the correct name and give it a second.
Click to expand...
Click to collapse
Actually I am using your rom. But it is not working in my Diamond. I dont know why. Do you have any suggestion? Thx
I mean it is not working with keyboard, or resco keyboard pro. ( it is working with phone keyboard, etc...) But the annoying thing is: It auto insert contact after press space do you know how to disable it. THX

etenx500 said:
Actually I am using your rom. But it is not working in my Diamond. I dont know why. Do you have any suggestion? Thx
Click to expand...
Click to collapse
it does work because i just tried it, make sure your contacts are on the phone and not on the sim. also check if you have selected T9 or single input.

Actually I am using your rom. But it is not working in my Diamond. I dont know why. Do you have any suggestion? Thx
I mean it is not working with keyboard, or resco keyboard pro. ( it is working with phone keyboard, etc...) But the annoying thing is: It auto insert contact after press space do you know how to disable it. THX

I have the same problem, it works with the new big kb, but not with the standard old keyboard.

I Just discovered that. The auto-fill( like wm6) was disable by ezinput or xt9. Because when I flash a rom without them. The auto-fill will work. I hope someone can sort it out. THX

What you can do if AutoMatch doesnt work for you is type in the name of the contact or part of the name, click menue and then click check names. Works like a charm.
I never even knew that The diamond had Automatch contatcs in the Messaging system

MichaelMan said:
What you can do if AutoMatch doesnt work for you is type in the name of the contact or part of the name, click menue and then click check names. Works like a charm.
I never even knew that The diamond had Automatch contatcs in the Messaging system
Click to expand...
Click to collapse
Truth but the "automatch" (or auto-fill) is much more convenience

I guess. But convenience is good when its working...lol......plus its only two taps of the screen..at least you dont need to go through 5 or 6 menus like you used to...hehe

Install Kaisertweak, disable xt9 with it, restart device and it all works again with default kb.

dutch64 said:
Install Kaisertweak, disable xt9 with it, restart device and it all works again with default kb.
Click to expand...
Click to collapse
THX SO MUCH. I WILL TRY IT NOW

[REQ] Shortcut that restarts TF3D

Like many of you, I'm constantly trying to modify my manila files and TF3D. To see the results one must reset TF3D by clicking Start>Settings>Today>Items>TouchFlo 3D then exit, re-enter and enable it.
With that being said, can anyone create a shortcut that can be place in the start menu or programs tab that does that process with the click of a button?

Manila Control by matsogo!
Here you are
http://forum.xda-developers.com/showthread.php?t=447504&highlight=manila+control

I've read that some people have troubles with manila control on HD, but at the moment I don't have an HD to test, I'll get it monday(I hope).
I'll test and report.

davideuck said:
I've read that some people have troubles with manila control on HD, but at the moment I don't have an HD to test, I'll get it monday(I hope).
I'll test and report.
Click to expand...
Click to collapse
Ok great, thanks for the link!

without using any 3rd party apps, patch, hack, i'll do it this way:
slide to settings, tap "modify tabs", tap "done"
and voila: TF3D restarts
not sure about the english wording as my device is actually german.

restart whit button program
is did what your looking for.its a program to change everything for tf3d,and if you instal this you get a extra program for restart

sitaniace said:
is did what your looking for.its a program to change everything for tf3d,and if you instal this you get a extra program for restart
Click to expand...
Click to collapse
compatible with HD??? i've saw this app on diamond. but dont know if this is compatible with HD. any confirmed answer? thanks

JohnQ said:
compatible with HD??? i've saw this app on diamond. but dont know if this is compatible with HD. any confirmed answer? thanks
Click to expand...
Click to collapse
Hi
it is compatible!!!
ciao from Shanghai

6Fg8 said:
without using any 3rd party apps, patch, hack, i'll do it this way:
slide to settings, tap "modify tabs", tap "done"
and voila: TF3D restarts
not sure about the english wording as my device is actually german.
Click to expand...
Click to collapse
absolutly correct!!!!! i think this is the fast way to restart TF3D without any addictions.
ciao

Do images rotate on turning the device without opening the keyboard?

Do images rotate on turning the device without opening the keyboard? like on HD or Diamond? Because in my TP2, images do not rotate on turning the device as it is supposed to due to g-sensor .... isn't it? Does it have to be activated somehow or is it not possible in TP2 ... which will be strange.

dr_s said:
Do images rotate on turning the device without opening the keyboard? like on HD or Diamond? Because in my TP2, images do not rotate on turning the device as it is supposed to due to g-sensor .... isn't it? Does it have to be activated somehow or is it not possible in TP2 ... which will be strange.
Click to expand...
Click to collapse
by default rotation with gyro does not work on Rhodium.
You can use gyrator2 if you wish to enable this functionality.
Cheers,
Beasty

I have the same problem. Screen rotates in opera, but not in Album.

same here, and gyrator is not the perfectly program for this... its slow, and it isn't integrated with WM after install. its just a stand-alone app what runs as the same way as other programs (you can also close it by taskmanager).
Also taksmanager doenst close programs by clicking [X] ?? (even when i select it)...

Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.

Well found! Very Handy
Thanks

Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
I understand this works great. few questions:
Doesn't it slow the device?
What programs do you suggest to be rotating without the screen sliding out and what programs do you think shouldn't flip to landscape because it gets annoying?

Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
thanks. great find. but same question as above.
Why HTC has not made it default for the album?

dr_s said:
thanks. great find. but same question as above.
Why HTC has not made it default for the album?
Click to expand...
Click to collapse
The same question could be applied to many things HTC have done with the Rom on the Rhodium.
At the end of the day, do what we do best here, add the functionality that you want, then fix any problems that occur afterwards.
I haven't noticed any adverse affects using gyrator, as yet anyway.
Cheers,
Beasty

does anybody by any chance have the window class of sygic mobile drive (previously mcguider)??

Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
how do you add this file to the reg for us newbs please
thanks for any help

Doesn't it automatically display the picture at the maximum size? Meaning if it is a landscape picture it displays it in landscape and if it is a portrait picture it displays it in portrait? I actually prefer the way it is done in the new album which I am running on my FUZE.

combat goofwing said:
how do you add this file to the reg for us newbs please
thanks for any help
Click to expand...
Click to collapse
Guide for newbies here
http://htctouchpro2.wordpress.com/2009/06/21/htc-touch-pro2-hacks-–-part-2-–-g-sensor-everything/

thanks thats why i love this site, you get what you think is a great phone and they just help you make it even better
and to think i thought my viewty was the muts nuts

Could someone help me out with the TomTom reg key? I get the modulename bit right, just point it to tomtomnavigator.exe. Don't really understand the whitelist key. What should the value be for Tomtom?
Thanks.
EDIT: Just found it in the topaz section. For anyone wlse who needs to know, it is "MunichWinClass" for some reason. Thanks to infoman68 for that.

Awsome thread I downloaded and installed the gyrator2, but I cannot figure out what plugin/program to grab from microsoft to install that dotnet 3.5 on the phone to get gyrator to work. can someone please point me to the correct file?
thanks.

to anyone else wishing to add an app to HTCs GSensor list in the reg and not knowing the window title or class...
download Gyrator2, install and run. Add a new event. Choose learn. Take stylus out. Make active the window you need the name of. Insert stylus. There! Gyrator has just told ya what ya need to know... Uninstall gyrator and add what it told ya to the reg...

nice post dude...
i am still trying to get the gyrator to work on my pro2.
did you also have issues with the dotnet thing?

Hello, brilliant suggestion from bigjezza. Myself I'm trying to get Microsoft Reader to react to my phone's gyrations. However when I bring up Gyrator 2 the MS Reader app is not listed. Actually it never came up in my program-list in the first place even though it did install and runs perfectly. Had to stick a shortcut in the Windows/Start-menu.
Any suggestion on how to get MsReader onto Garator's list, or does anyone know what the relevant data is for MsReader just like that?
Many thanks/McHan

Joseng said:
Attached regisry that will enable a lot of programs in G-sensor.
You also can edit by notepad to remove program that you are not like.
Click to expand...
Click to collapse
I did install the .reg, then looked my self the new strings in the registry and everything looked OK, but the images on Album still do not respond to device rotation... Any other solution? Or it is need to activate or deactivate something else?
regards,
Tyrone

How to get to the INPUT panel in wm 6.5.5?

Hey....does anyone know how to get or FIND the INPUT panel in wm 6.5.5? I have to register RESCO Keyboard Pro in my phone but can not find the INPUT panekl to be able to do it!! sound silly i know but has been driving me crazy for 3 days now....!

Start>Settings>Personal>INPUT
Some cook ROM don't have the input setting since they remove it.

angusc said:
Hey....does anyone know how to get or FIND the INPUT panel in wm 6.5.5? I have to register RESCO Keyboard Pro in my phone but can not find the INPUT panekl to be able to do it!! sound silly i know but has been driving me crazy for 3 days now....!
Click to expand...
Click to collapse
Delete the Redirect key under the registry [HKEY_LOCAL_MACHINE\ControlPanel\Input]

same thing happened to me a week ago, took me 4 days, until I delete the Redirect key as mentioned above, and I got back my INPUT in SETTING!!
Good luck

Yea thats Microsoft hard at work. They are removing the Owner name, Input controls, and another one...
Even the owner name kills most applications since they base their software keys off of the owner name.

rgb-rgb said:
Delete the Redirect key under the registry [HKEY_LOCAL_MACHINE\ControlPanel\Input]
Click to expand...
Click to collapse
You are my HERO RGB!!!! Thanx man!

angusc said:
You are my HERO RGB!!!! Thanx man!
Click to expand...
Click to collapse
Glad I could Help

Java problem
rgb-rgb said:
Delete the Redirect key under the registry [HKEY_LOCAL_MACHINE\ControlPanel\Input]
Click to expand...
Click to collapse
As you solved the Input problem for WM6.5 (Thanks a lot for that), maybe you have an idea why I don't see java icon under programs in WM6.1. When I try to install a java application, Esmertec appears (it seems java program is hidden somwhere) but java midlet is found somehow harmful or something and I get two option "Kill the midlet-or-NO". And my java applications cannot be installed successfully. I cannot install any other java program externally either. Any idea to solve the problem?

thanks +1 - touchpal uses it for registration and they have no idea as to an alternative method

edit .

rgb-rgb said:
Delete the Redirect key under the registry [HKEY_LOCAL_MACHINE\ControlPanel\Input]
Click to expand...
Click to collapse
thank you thank you rgb-rgb

HI. I installed a Htc phone pad for my Silverbelt, and it works great but no chance to configure the settings like sound and other things..
I already removed the "redirect" on HKEYLOCAL~/Control~/Input
:S any ideas?
thzz