Develop Bugs

help!!always hang after flash to manila2d!!

hi there, i hv a problem here,i hv flash my dopod838 pro to manila 2d which i found in this forum,after flash it,my device also hang and when i do a soft reset,it hang at boot screen and cant enter windows..i wondering what problem with my device.....can some body gv me idea regarding my dopod?relly blur and no idea about it...........

Hi! Have you tried flashing original carrier ROM & then flashing the ROM of your choice??

original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks

I hope you had Hard SPL installed.
Do a search to see if you can find your carriers WM06 rom, it doesn't need to be WM05. Search is your friend here.

kahwah said:
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
Click to expand...
Click to collapse
HI!
Please check this link out I am sure it you will get enough info about upgrading your Dopod 838 pro!
Best of Luck!

ultramag69 said:
I hope you had Hard SPL installed.
Do a search to see if you can find your carriers WM06 rom, it doesn't need to be WM05. Search is your friend here.
Click to expand...
Click to collapse
yes i have hardspl installed,my spl ver is 2.10.olipro,but still like that

kahwah said:
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
Click to expand...
Click to collapse
Hi!
You can get original carrier shipped WM6 rom for your mobile here!

thanks hemendra05!!1 more thing i want to ask,what is radio rom?what is the diffrence flashing radio rom and other ordinary rom?thanks

kahwah said:
thanks hemendra05!!1 more thing i want to ask,what is radio rom?what is the diffrence flashing radio rom and other ordinary rom?thanks
Click to expand...
Click to collapse
Hi!
The radio ROM provides improvements on the GSM radio stack and this has effect on the GSM signal, AT command interface, GSM data modem (3G, GPRS, EDGE, HSDPA, etc...) functionality that is controlled by the Radio Interface Layer (RIL)
Please go trough this page you have plenty of information related to all Hermes related queries one may have.. Hope it will be useful for you

Just remember though that if something stuffs up while flashing the radio rom, you are pretty much gonna end up with a brick... You may be able to use the PDA functions but phone will be gone forever...

same problem
I have a dopod 838 pro. Hardspl by olipro. Flashed roms with manilla 2d and right now suffering the same problem like kahwah..
Tried already the method of flashing original rom then to the cooked rom but still the same problem persist.
Can someone give me an idea on what to do next..

Seriously guys, both of you, READ the Hermes Wiki and the Noob section, they are set as stickies at the top of the thread. I mean, come on, you have not even posted 7 posts on XDA-DEVs and you already are close to bricking your phone.
READ the Wiki first!

Noob Question: HardSPL and ROM

Hi,
I have a CDMA diamond (flashed) but now my friend ask me to flash her GSM diamond for her.
I am fairly familiar with flashing (it's a few clicks after all).
I usually get CDMA stuff from ppc-geeks and i am fully aware that xda-developers are for GSM diamond (that's why i am here).
I have a few questions after reading a few posts and hope someone can fill in the gaps:
1. I am aware that HardSPL which only allows Oilnex signed rom seems to be a better idea. Which version i should try?
2. I am aware that there are many roms out there and each has its own pros and cons. Would anyone name a few that's closest to the stock diamond rom and name a few that's most popular?

ntony said:
Hi,
I have a CDMA diamond (flashed) but now my friend ask me to flash her GSM diamond for her.
I am fairly familiar with flashing (it's a few clicks after all).
I usually get CDMA stuff from ppc-geeks and i am fully aware that xda-developers are for GSM diamond (that's why i am here).
I have a few questions after reading a few posts and hope someone can fill in the gaps:
1. I am aware that HardSPL which only allows Oilnex signed rom seems to be a better idea. Which version i should try?
2. I am aware that there are many roms out there and each has its own pros and cons. Would anyone name a few that's closest to the stock diamond rom and name a few that's most popular?
Click to expand...
Click to collapse
1. try olinex unsigned (developers) hardspl: http://forum.xda-developers.com/showthread.php?t=416211 (section A, point 1)
2. u need closest to stock - try the one in my signature (http://forum.xda-developers.com/showthread.php?t=422417)
good luck!

1.http://forum.xda-developers.com/showthread.php?t=400950 1.93Olinex unsigned proven to be work on any rom so far=tested by me self without any problem
2. http://forum.xda-developers.com/showthread.php?t=438313

The 1.93.olinex is probably the best choice because there are only a handfull of oli signed roms in existence. The non-dev version of hardspl should go the way of the dodo as people seem to rarely use it.

Upgrading from WM6.1 to WM6.5. Help Needed

Hi,
I am using HTC Touch Diamond WM6.1 since last 1 year. I am very much interested in upgrading to WM6.5. But, I am not sure how to do that.
I have been upgrading ROMs from the HTC website, but not able to understand the way its given here in this website.
Please Help.
Regards,
TB

tabharti said:
Hi,
I am using HTC Touch Diamond WM6.1 since last 1 year. I am very much interested in upgrading to WM6.5. But, I am not sure how to do that.
I have been upgrading ROMs from the HTC website, but not able to understand the way its given here in this website.
Please Help.
Regards,
TB
Click to expand...
Click to collapse
Try with this
http://forum.xda-developers.com/showthread.php?t=416211

tabharti said:
Hi, ............... Please Help.
Regards,
TB
Click to expand...
Click to collapse
Please check THIS and do not do anything silly, else you will end up with a BRICK. Good Luck !

Thanks to both for the reply.
Now, I finally have installed WM6.5 on my Touch Diamond
Current Specifications:
SPL - 1.93.Olinex
ROM Version - BsB 6.5 WWE
ROM Date - 07/15/09
Radio Version - 1.00.25.05
Protocol Version - 52.29.25.12G_1.00.25.05
Just need to know if I have done right.
I am feeling very good after looking at the interface and look of WM 6.5
Regards,
TB

Question
I've tried using the thread on how to install the HardSPL for the Diamond. So far, i have been unsuccessful. I get the black screen everytime. once i get around this i plan on upgrading to 6.5 as well. Can ya'll help me?

Try to follow the steps mentioned in the below link
"http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26"

is it possible to update with Windows 6.5 Rom on Indian 2g Diamond

hi,
Need help on updating my HTC Touch Diamond.
is it possible to update with Windows 6.5 Rom on Indian 2g Diamond.
Is there any specific process for this.
Please help me out

@ bobbyswebzone
Yes, you can do it on 2g Indian Diamond.
Follow this link : http://forum.xda-developers.com/showthread.php?t=416211
Its needs a little reading and please make sure you do read or else you might end up with an expensive brick!
Also Ensure your phone is GSM and not CDMA.

thanks for your quick response will check the forum

bobbyswebzone said:
hi,
Need help on updating my HTC Touch Diamond.
is it possible to update with Windows 6.5 Rom on Indian 2g Diamond.
Is there any specific process for this.
Please help me out
Click to expand...
Click to collapse
Absolutely no problem. Pickup any ROM( of course for Diamond) of your choice and flash.
I am using it and no problem......

Hi, you can even look at my tutorial for Indian Diamond. I had lot of difficuly in searching specific info on flashing INDIAN diamond, hence wrote this tutorial.. Hope it helps..
Link:
http://forum.xda-developers.com/showthread.php?t=429324

@karkalanand
Thanks for creating a beautiful thread that would help the Diamond 2G users. I would say that should be the bible for all the 2G users.
I have a question. When i did Hard SPL i used this one "Hard-SPL 1.40 Olinex SIGNED" however i noticed in your thread and in your signature that you have mentioned to use "Hard-SPL 1.40 Olinex Developer Edition-unsigned ". Can i please ask what is the difference and can i go back to what is mentioned in your thread even though i have already done "Hard-SPL 1.40 Olinex SIGNED"?
Also i had tried installing a radio version from the diamond thread of 1.13 but it gave an error that its a wrong device....could it because of the signed Hard SPL?

Language change

Hi all,
i was reading threads on changing roms on htc touch pro2 and i have a question that isn't answered (or i couldn't find it).
i currently have swedish language only, and i would like to change to english but i am not sure which rom can i install?
can i install any one from this link:
Code:
http://forum.xda-developers.com/showthread.php?t=893696
here is the info on the device i have:
MODEL:HTC Touch Pro2 T7373
ROM-version: 1.86.413.0(67102) SVE
ROM-date: 25.09.2009
radioversion: 4.49.25.17
protokolversion: 61.44tc.25.32U

Denao200 said:
Hi all,
i was reading threads on changing roms on htc touch pro2 and i have a question that isn't answered (or i couldn't find it).
i currently have swedish language only, and i would like to change to english but i am not sure which rom can i install?
can i install any one from this link:
Code:
http://forum.xda-developers.com/showthread.php?t=893696
here is the info on the device i have:
MODEL:HTC Touch Pro2 T7373
ROM-version: 1.86.413.0(67102) SVE
ROM-date: 25.09.2009
radioversion: 4.49.25.17
protokolversion: 61.44tc.25.32U
Click to expand...
Click to collapse
You need Hard SPL first. Then you can flash any ROM in the world that is made for the GSM Rhodium.

thank you for your answer.
i successfully flashed my touch pro2 and it's working great - apart from the minor keyboard issues.
i know i need to hard SPL first, although i don't know exactly why. all i wanted to know what are the chances that i screw up my phone by installing wrong rom.
anyway, this is a great forum and i am happy to be here.
thanks to all who develop roms/radio/etc... and make tutorials

Denao200 said:
thank you for your answer.
i successfully flashed my touch pro2 and it's working great - apart from the minor keyboard issues.
i know i need to hard SPL first, although i don't know exactly why. all i wanted to know what are the chances that i screw up my phone by installing wrong rom.
anyway, this is a great forum and i am happy to be here.
thanks to all who develop roms/radio/etc... and make tutorials
Click to expand...
Click to collapse
You are on the right track. The only thing you need to keep in mind is that you can only install GSM ROMs on your device. If you try to install a CDMA ROM, you run the risk of bricking it. Just don't wander into the CDMA forum, and you'll be just fine.

hi,
yes i realize that there is a difference between GSM and CDMA devices. i saw all the warnings in the rom flash tutorials
by the way, i have one more question about adobe flash.
i know that microsoft no longer supports wm6.5 and neither does adobe...
on adobe's official page the latest flash is 7.0.
is there anyone at all that is trying to develop flash 10 for wm6.5?
i think that would be awesome, so any links on this topic are more than welcome.
i would be happy to try to help develop flash 10 although my programing skills are pretty basic...
p.s. the forum looks nice on touch pro2, but it could be a bit wider.

Denao200 said:
hi,
yes i realize that there is a difference between GSM and CDMA devices. i saw all the warnings in the rom flash tutorials
by the way, i have one more question about adobe flash.
i know that microsoft no longer supports wm6.5 and neither does adobe...
on adobe's official page the latest flash is 7.0.
is there anyone at all that is trying to develop flash 10 for wm6.5?
i think that would be awesome, so any links on this topic are more than welcome.
i would be happy to try to help develop flash 10 although my programing skills are pretty basic...
p.s. the forum looks nice on touch pro2, but it could be a bit wider.
Click to expand...
Click to collapse
Sorry to disappoint, but you kind of answered your own question there. MS and Adobe both dropped support for flash on WM. The only way to get flash 10 on your Rhodium is to use Android.