Related
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!
No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!
I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.
Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...
Thanks for the replies! Anyone else with a positive experience?
I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?
Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...
For those who successfully upgraded their P3600 to WM6, what technique did you use?
I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.
PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.
Thanks Thomas,
That's great information!
generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....
I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.
if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.
I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.
Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.
Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...
Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.
Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now
Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.
spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...
---edit---
please delete this post
have fun with your spv
I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!
I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..
Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.
Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt
http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.
Hi All!
My brother is facing a strange problem with his Cingular branded 8525. Non of the new WM6.1(or even wm6) roms are woking with his phone except the one Build 19949 released by PNT dated 02-06-2008 (CE OS 5.2.19949 Build 19949.1.2.0.PNT.Full.rar) & the official roms for Hermes.
The major problem faced after trying to put any latest roms is that we are not able to see any pictures in any of the application. (e.g today screen, dialer skin, WMP skin, even photos taken from the camera). Top & bottom bar are ok, Os is booting without flash/welcome screens. After flashing /during booting we get a white screen insted of flash screen/welcomescreen.
He has cheked for the bad block using mitty but it dosent show any bad block there.
We will be really grateful if you can suggest any fix/solution for this strage problem.
Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck
Hi, joel32137!
joel32137 said:
Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck
Click to expand...
Click to collapse
Thanks for your promt reply.
Tried re-flashing HardSPL-2.10. Also tried flashing official WM5 rom & is working. I will now try reflashign Hard spl again as suggested by you & then flashing with PDAViet lateset rom. Will come come to you after that with results.
Thanks again.
Hi, joel32137!
joel32137 said:
Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck
Click to expand...
Click to collapse
I tried exactly what you have suggested, but no luck.
I flashed Hardspl -7 (olipro 2.10) > official wm5 ROM from cingular/Att > Hardspl again > then tried DVH's 19965 Rom
Please help!
Hey,
Don't know what else to tell you other than to try and re-download your DVH's 19965 file,it may be corrupt.As always,go back to WM5,then re-install HardSPL,then try to install your desired WM6.1 flavor of the week.Did you try DVH's 19214 or 20226? Both pretty good roms. I just installed 19214 from 20226 and it is noticebly snappier than 20226.
Good luck ;p
hemendra05 said:
I tried exactly what you have suggested, but no luck.
I flashed Hardspl -7 (olipro 2.10) > official wm5 ROM from cingular/Att > Hardspl again > then tried DVH's 19965 Rom
Please help!
Click to expand...
Click to collapse
As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun
Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip
thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend
does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos
Thx mate
Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude
casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos
Hi,
I'm really looking for a WWE WM6.5 Naked Rom for the P3600 Trinity
Not interested in many apps or fancy menu's (I usually disable any menu pluggins such as QMenu etc.)
All I would like is:-
Plain Boot Loader Maybe with wording such as "P3600 - Trinity"
Calc
Calendar
SMS
FDC Soft Task Manager
RegEdit
CorePlayer (TCPMP)
QuickGPS
TomTom Navigator 7.450
Current System Setup:-
CE OS 5.2.21215 (Build 21215.5.0.0)
Processor - SC32442A-400Mhz
Rom Version: 3.00.707.18
Rom Date: 04/18/09
Radio version: 1.56.70.11
I use a company sim which doesn't allow data in anyway (no MMS / No 3G / No GSM) only through the USB / Wireless / Bluetooth.
The reason I ask is because the rom i'm using seems to have a memory leak, and needs daily rebooting.
I currently use the AthineOS on the TyTnII and quite like it.
I have tried many roms, and although they work reasonably well, I could do with something a little more "personalised"
Many Thanks,
Wayne.
Too scared to cook, not afraid to test and naturally cheeky!
Devices:-
WM 6.5-
HTC TyTn II
HTC Trinity P3600
WM 2003-
HP Ipaq 6340
HP Ipaq 6515 (Beetle)
HP HW2210
Trinity WWE / wm6.5 build 215725 Lite
Try the followed rom
Trinity WWE / wm6.5 build 215725 Lite
thai rom in english
its lite version
link
http://www.mediafire.com/download.php?2irgtzytjgc
just downloading now - thanks!
Just loaded the rom.
Looks quite nice.
seems very stable without any glitches
I will report back, but at the moment it seems stable and fast - even when i install TomTom7
I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank
Hi, I'm gonna try it, and then I'll give my opinion.
Thanks.
Ricky
tudn said:
I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank
Click to expand...
Click to collapse
Did You get install the ROM? Or it was when you were up dating it?
ricky chan said:
Did You get install the ROM? Or it was when you were up dating it?
Click to expand...
Click to collapse
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.
tudn said:
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.
Click to expand...
Click to collapse
i assume that you use an official rom or you have flashed official spl.
read this and this
Hi arnooo
I try this rom but camera don't work... you know how?