I'm looking for a STRONG holder for my phone that I can use to mount to my motorcycle. I have seen the iGrip holder and it seems to be the best so far, but I dont think it would hold my phone in a crash.
I plan on using GPS, maybe an accelerometer, the music player, and a Wireless webcam (rear view camera) if I can find one I could use in Ad-Hoc mode. But all of these require the phone to be visable and with the ability to use the touch screen, yet I dont want my very expensive phone to be trashed if the bike goes down because some little plastic holder lets my phone pop out.
Actually, I want something as strong as the store holders, the ones ment to lock the phone in so people dont steal it.
I dont mind making the mount for the holder to mount to the motorcycle, but making a holder to put my phone in is totally different.
Any ideas? Heck, any place where I could buy the metal mounts that the stores use?
Thanks
Same here
I'm looking for that too.
I do not have much need to use the "touchscreen" on motorcycle(would be better if I could, but I no longer looking for this feature). I'll use to GPS and to know who is calling me.
The equipment of the "RAM-MOUNT (www.ram-mount.com) seem to be cool, and they have a model (Acqua Box) that are waterproof.
Only the price is that I thought could be better, but ... There is my suggestion / tip.
If you find something better or cheaper, please tell. And preferably that ships to the world.
Any ideal if the Fuze would fit in the UNPKD RAM MEDIUM SIZE AQUA BOX?
For my Kaiser I've choosed the SMALL ACQUA BOX, but I don't know the sike of the Fuse.
Anyway, is better get a bigger than a smaller box.
In the manufacturer's Web site, both RAM and HTC, you can find the dimensions of products, including the internal space within the ACQUE BOX.
DIY
I have a Sigma tri-light for my bicycle that I modded with a piece of metal, some rubber for stability and a magnet. So far it's working quite well.
v3suvius said:
I have a Sigma tri-light for my bicycle that I modded with a piece of metal, some rubber for stability and a magnet. So far it's working quite well.
Click to expand...
Click to collapse
Sounds good...any pics of it?
Related
Hi, just wanted to give a quick impression of 2 windshield mounts I ordered.
http://www.amazon.com/Arkon-Univers..._1_3?s=wireless&ie=UTF8&qid=1305654075&sr=1-3
http://www.amazon.com/Arkon-IPM515-...Holder-Compatible/dp/B003Z4L68S/ref=pd_cp_e_2
Overall they both work OK. I much prefer the "Universal Mount" just because of how the Slim Grip opens/closes. The Universal is a squeeze style close with a button release. The Slim Grip you have to push the lower part down to open it, and the same to get your phone out. Kind of a pain.
Plus, even though the Slim Grip seems to be OK in Landscape...it still scares me not having a physical piece there to hold it up in case the spring force isnt enough.
I am using the Slim Grip as a vent mount (using the vent mount supplied with the Universal) and the Universal as a Windshield mount. So far the suction cup on the Universal seems very strong and I have not worried about it coming down.
One thing I noticed on the Universal that is a bit annoying, when the unit is fully opened and you are driving it rattles. This is remedied by simply closing it 1 or 2 clicks (which still allows you to put your phone into it without opening it back up).
I have the same Universal mount but with the frictionless pad. How do you like the Vent mount though in the terms of removing it? I got scared away from it because the reviews had that the two clips to hold it in place easily break.
Ordered the Universal yesterday, should have it tomorrow. I'm curious to see how well it works with the extended battery, but I like the idea of mounting it to the vent. Can't wait to get it regardless though, since the other one I have will only work with the stock battery.. Grrr..
I had a mount similar to the universal mount here (different brand) that I grew to loathe quite a bit because it rattled with no device in it. I didn't put my phone in it every time I got in the car and this bothered me greatly. I'm glad I avoided that universal mount because I would not tolerate that at this point.
The second mount (that you have to push down on the lower part to insert device) is the one I use now. It doesn't bother me how it functions and it is quiet. It grips well enough that you shouldn't worry about it slipping, and the extended clips make it work great for this phone without needing a huge stretch on the cradle to insert the phone.
I got the universal mount yesterday. Love it so far. Haven't noticed any rattling, but I may not either unless I switch vehicles. Keeps the phone secure though, and it works nicely with the extended battery in place (no case yet).
I do kinda like the looks of that other one too. Maybe I might order it for the wife and try it out. Not sure how often she'd use something like that though...
frankspin said:
I have the same Universal mount but with the frictionless pad. How do you like the Vent mount though in the terms of removing it? I got scared away from it because the reviews had that the two clips to hold it in place easily break.
Click to expand...
Click to collapse
Hi, I do not have much experience with this yet as this mount is in my wife's car.
The vent mount clips do seem a bit flimsy...especially since I am using it on the "slim" mount. With the universal I wouldnt worry too much because of the button release, squeeze in. You arent putting much if any pressure on the clips.
But with the slim mount...I have a feeling these could break on me down the road.
Those clips are definitely flimsy. Solved the problem though: rather than use the clips, I pulled that other piece off and cable tied it to my vent. Solid, and not moving.
Obviously, it does no good if you switch vehicles, but for that I will use windshield mount then.
Sent from my ADR6350 using XDA App
Just wanted to update on my "hack" for the vent mount. Been very solid so far. I have some concern over the longevity of the cable ties, but honestly, it's a very minor concern. Very little movement of the phone, great location being on the air vent (especially in the summertime, keeps it cool).
I can post pics if anyone wants to see, but I'm glad I went that route. Leaves the windshield mount available for when I'm in a company vehicle or my wifes car.
Do any of these after-market mounts activate the car panel app? I've seen how you can find and run it through the HTC universal search but is there any other way to activate it (like with a magnet on the OG Droid)?
jesand83 said:
Do any of these after-market mounts activate the car panel app? I've seen how you can find and run it through the HTC universal search but is there any other way to activate it (like with a magnet on the OG Droid)?
Click to expand...
Click to collapse
Not with a magnet. My gut is that a resistor or something is what's required. Check this thread:
http://androidforums.com/htc-droid-incredible-2/350066-there-anyway-trick-dinc2-into-car-mode.html
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
Thanks, never seen one that slides into the CD slot. Btw...that link said for iPhone 4S.
SamsungVibrant said:
Any suggestions?
Click to expand...
Click to collapse
http://www.slipgripcarmounts.com/Galaxy-S-III-I9300_c_27331.html
And chose one for you. I've ordered this one http://www.slipgripcarmounts.com/Sl...Using-OtterBox-Commuter-Case---_p_130841.html yesterday cause I've had the same one for my Fascinate for almost 2 years. Perfect fit and very good quality.
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That's really cool!
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Best car holder I've ever had!
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
I can't post pics/links but I followed Lifehacker's guide to making a car mount out of office supplies (site should be easy to find with that information). It works surprisingly well, even with the size of the S3 and the fact that my vehicle's vents aren't perfectly suited for the application. I thought it'd be kind of ghetto but it's hidden while in use and easy to remove and stash away when not in use.
I'll make a thread with pics once I have enough posts.
I got this one: http://www.amazon.com/SLIM-GRIP-WIN...CAR-STEREO/dp/B004H4FN6Q/ref=cm_aya_orig_subj
http://forum.xda-developers.com/showthread.php?t=1769055
Take your time and look around. There's plenty of car mounts that will fit this phone with a case.
Seems like most are the suction cup kind
will work for any phone even tablets
Sorry long time forum reader but first time posting. I can't post a link but search "soundgate m2 car mount"
You can probably find them cheaper. Used my for the og dinc for 2 years. I put the disc on my case instead of the phone. But I would have no reservations to put it directly on the phone as the disc is extremely unobtrusive. Just clean the spot you want to mount the arm really well with included wipe or rubbing alcohol. The arm mounts with a 3m adhesive pad and folds almost flush when not in use. Very slick. Put the discs on anything you want to dock to the arm. I forget how much weight it can handle but I saw a tablet being used as well. Sorry tried to upload pictures and after an afternoon of searching the forums on how to do it, i still cant get it. Just google "soundgate m2 car mount" you wont be dissapointed.
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
lynseyw said:
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
Click to expand...
Click to collapse
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
SamsungVibrant said:
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
Click to expand...
Click to collapse
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
lynseyw said:
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
Click to expand...
Click to collapse
Can I order if I live in the U.S.? Also I don't see the gallery.
lexluthor said:
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Click to expand...
Click to collapse
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Maverick777 said:
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Click to expand...
Click to collapse
Does it hold the phone in the vertical position, or only horizontal?
RubenRybnik said:
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
Click to expand...
Click to collapse
wow that's nice! Why did you have to cut out a hole in your case, the link says it comes with a case (I'm assuming with the magnet attached)!
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
ProClip. It is a little more money, but well worth it. I would get the proper mount for your vehicle (vent or side mount) and the adjustable phone mount so you can use it with a case. The also make a clip so you can move the mount from car to car.
Sadly, mine was recently stolen, but they offered me a discount because of my loss.
So I created a ghetto version as a sort of joke in exchange.
http://m.youtube.com/watch?v=jH3XoLqfXsY
www.proclipusa.com
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I use this one and I love it.. http://www.amazon.com/MSW-Exogear-Exomount-Universal-Mount/dp/B004Z8ZLOS/ref=sr_1_1?ie=UTF8&qid=1342868939&sr=8-1&keywords=exogear+car+mount
Hi folks,
I was curious if anyone has any personal experience with using the Note on a treadmill, I've seen many mounts and holders but haven't run across any personal accounts of people using this specific tablet and what mount they used.
I'd appreciate any feedback.
Thanks
droidtinkerer said:
Hi folks,
I was curious if anyone has any personal experience with using the Note on a treadmill, I've seen many mounts and holders but haven't run across any personal accounts of people using this specific tablet and what mount they used.
I'd appreciate any feedback.
Thanks
Click to expand...
Click to collapse
Dont have treadmill and cant answer that. Maybe these are interesting and there are different length of the gooseneck and "mount" can change to fit larger tablets up to 14" (have to buy separat, if can find it) (http://www.aliexpress.com/item/Adju...d-for-3-5-14-Tablet-PC-GPS-360/930111360.html)
http://www.youtube.com/watch?v=LrroDdQR3ck
http://www.ebay.com/sch/Mounts-Stan...html?_from=R40&_nkw=tablet+stand+mount+holder
http://www.amazon.com/dp/B0097WP26Y/ref=cm_sw_su_dp
My treadmill (Landice L7) has a shelf on which I rest the tablet. Works great, no shaking
I bought this thing to use my tablet to watch Netflix while using my Elliptical: (search item 310803776087 on ebay as I am prohibited from posting outside links since I don't have enough posts).
It attached fine to my elliptical with the L clamp. Measure your treadmill to how thick the surface the clamp will attach to is, make sure the clamp is wide enough as some mounts like these have small clamps.
I had to take the arm apart and flip it around since I wanted the arm to bend in the opposite direction. There was a little shaking but for watching videos it was no problem, I would not want to read on it though due to the shaking. I would often tighten up the ball point on the back since the tablet would often droop down some due to the weight of the tablet and vibration of the machine, eventually I managed to break the holder off that ball joint since it was all plastic. It was useless after that and I tossed it in the garbage.
So if I were to get a new one, I'd probably opt for an all metal one. Also I'd try out those gooseneck ones with flexible hoses like the one linked above rather than arms like I got since the gooseneck will be easier to position and have more position options. I'm not sure though if the flexible arm will as secure as the tightenable arms of the one I bought, maybe the flexible arm will slowly droop due to the weight of the tablet and vibration? The only good thing about the one I bought was the arm didn't really move, it was only the ball joint. You'd need a stiff gooseneck arm if it's going to be used with an exercise machine. Lemme know what you end up getting, I might go with the same if it's good.
droidtinkerer said:
Hi folks,
I was curious if anyone has any personal experience with using the Note on a treadmill, I've seen many mounts and holders but haven't run across any personal accounts of people using this specific tablet and what mount they used.
I'd appreciate any feedback.
Thanks
Click to expand...
Click to collapse
I have both a treadmill (older Nordictrac) and elliptical (sole e55) and both have an edge that perfectly holds my tablet. I flip my moko case to the back, and it sits in that spot very securely. That is, if I don't yank on the headphones too hard. Perfect to watch while working out...
Hi all,
just e tip: a dedicated carholder for this phone is ahrd to find and a little expensive if i'm honest.
if you search for a dedicated carholder form LG G2 on Ebay or such, this will do just aswell. mind you, with a little creative puzzling.
the size between these phones is comparable....not EXACTLY the same.
i've taken a light and heated the corners and the 'clipping and unclipping thingy' without the phone in it one by one.
After heating, fitted the phone in and pressen on the each corner-part and pushed the holder around it.
It fits pretty good and will not snap out easliy.
be careful after applying a heat source......ths plastic can be VERY HOT. insert phone and press it onto a surface.
no promises on the result ofocurse.....just thought i'd share it........
I just wanted to add that I went a different direction with this, and it works great.
I bought a http://www.amazon.com/SUPCASE-Samsung-Galaxy-Active-Unicorn/dp/B00DY2SEFE
Then I bought the quadlock mounts
The adapter for the phone
http://www.quadlockcase.com/products/universal-adapter
then bought the bike mount
http://www.quadlockcase.com/products/quad-lock-bar-mount-pro
and car mount
http://www.quadlockcase.com/products/quad-lock-car-mount
I attached the universal adapter to the back of my phone (easy easy compared to the otterbox stuff out there, since unicorn beatle case is uniformly flat already, it is why i chose it)
Now i attach it to my bike/car when I need to, and it doesnt make it too much bulkier. I actually have 2 cases, one with and one without the adapter, and I switch them out if I am going to go biking, or on a long trip where I might use the GPS.
there are really stable BikeMounts from Upmove:
http://www.upmove.eu/samsung-galaxy-s4-active-fahrradhalterungen/705j43k34u55.html
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Tonesav said:
I wanted the equivalent of an iBolt with a wireless charger in the end I wireless charge at home and use a magnetic power connector on the car.
All the ones I found only gave portrait and I preferred to use landscape
What car charger are you using?
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
I'm looking to buy still, just got my s8+ a couple weeks ago, with the unveiling of the note8 I almost took it back
as of right now for in the car I'm using https://www.amazon.com/BESTEK-300W-Power-Inverter-Adapter/dp/B004MDXS0U/ with cables
not sure I want to have to add in something to a case to make it compatible I'd rather the case be compatible to begin with, many magnetic chargers work just fine without add ins
https://docs.google.com/drawings/d/10wBkiHyNDZF969vzCDtKLQ8TI5XLnB5wJ3GOLJJhA-8/edit?usp=sharing
basically just imagine some time on the dremel to cut out everything covering up the back as much as possible except maybe leaving a bit near the edges
if I have the ring it'll be near the power button
and the kickstand will be probably above the camera or down by the fcc text, very small chance I do it vertical by the bixby button
pair it with a belt clip, and maybe something like a folio cover under the screws if I do feel like having cards
if I can do this with existing parts and a dremel why can't one of these case makers?
I'm trying to figure out how I would do a swivel like the ring but with something as long as a kickstand for more angle options, found one custom stent on a case that could work, not sure yet if that's how I want to do it?
figured it out, answer is no kickstand, there's 3 places I legit need a kickstand and I can just get stands and put them there
apparently there isn't much of a phone case modding scene I can find.... does everyone just live with the cases they buy? can't everything be improved with some ingenuity?
My new case, ticks most of the boxes
https://www.amazon.co.uk/XOOMZ-Detachable-Blocking-Magnetic-Leather-Brown/dp/B073QJ1N8P
biotoxin said:
I've spent the better part of the week scouring for good s8+ cases that would be compatible with wireless charging and in the end I've hodge podged pieces into a frankencase
seeing as I'm probably going to make myself a case I thought I'd share the elements of what I was looking for and ask if I'm just crazy for wanting so much or if I'm not alone.
I don't need much coverage, mostly the corners and a raised edge in case it does fall but otherwise I'm not concerned with protecting the fronts and backs given how rarely I drop my phone if I've got an actual grip on it no thanks to the slippery materials they use
I'd like direct access to my buttons, many cases have their own button that pushes the actual button, I've never enjoyed this as it's usually stiff or hard to press and often hard to distinguish from the case itself
wireless compatibility is a must for me given the fact I'm not only on the road most of the day but I'm constantly in and out of the vehicle where I'm definitely not leaving my phone that I'll probably actually need, and having to work a harness gets annoying during regular use imagine 30+ times a day
this means something magnetic so it sticks in place like the airdock 2 which I have no idea if it's compatible with s8+ or not as of yet
getting back to the in and out I need a hip holster because I spend way more time texting and taking photos of job sites than talking so a headset is less important than not having to fish for my phone
lanyards are just good ideas, why is it so rare to find them let alone on a rugged case?
a kickstand doesn't have to be complicated either and doesn't need an entire phone length if you know what you're doing with it, spigeon has a nice stick on that generally gets the job done, or even those ring mounts double as kickstands and great dash magnet mounts
who puts a card holder behind the case right in the magnetic field of wireless charging? it's called a folio cover geez, even those work as kickstands in a pinch as flimsy as they are in that capacity.
granted with all the mobile payment options these days you generally don't need to worry about a card in the first place so it's coming time to uncouple those two
and on a side rant why are we still using adapters and converters for magnetic break away cables? shouldn't this be standardized by now?
I'm going to sketch up the case I'm thinking of and post back maybe you guys can tell me why it's such a ridiculous idea to have.
Click to expand...
Click to collapse