Related
Anyone have problems with phone alarm and wm6. Everytime I soft reset since install in wm6 I get a missed call from (000)000-0000?
Which version are you using (of phonealarm)
No problems here with version 1.58 build 100. Using latest LVSW.
Try running the latest beta version (available on the pocketmax forum)
000-000-0000 is a skype. Unfortunately some networks still allow that number to come in. I got one myself today. Ridiculous because if you block it no one from skype will be able to call you.
I have pa 1.58 (build 100). Can you get a skype number if you don't use skype or have there software installed.
Still getting the missed calls from (000)000-0000. The phone doesnt ring just a notification of missed call. Happens 3-4 time a day now. Anyone have any ideas.
chrisryn said:
Anyone have problems with phone alarm and wm6. Everytime I soft reset since install in wm6 I get a missed call from (000)000-0000?
Click to expand...
Click to collapse
I am having problems with PhonelAlarm and WM6 as well. I'm running the LSVW 26-3 edition without any problems except for PhoneAlarm.
I've tried PA 1.58 (full/lite) and 1.6B9 + 1.6B10 (full/lite) and i've no reminders for missed calls and missed sms (the others i don't use).
I also tried the new app alarmPal 0.3 (which is exactly what i need), but also no luck...
(you find alarmPal (still beta) here: http://www.pocketmax.net/smf/index.php?topic=4030.0 )
No notification, no sound ;(
I've searched allready and it seems that a lot of people are running PhoneAlarm on their LVSW Phones without problems. I also made a clean install follwing mrvanx guide and installed PA as my only app, no luck.
Maybe someone running PA could point me in the right direction.
Thanks a lot,
chaos42
Am using PA 1.6 b9 on black 2.0 no problems.
How long does the Beta version last for?
I used 1.58 before and it has "tearing" screen refresh issue. I.e. when I open another program and go back to Today screen, PhoneAlarm graphics are messed up.
lanwarrior said:
How long does the Beta version last for?
I used 1.58 before and it has "tearing" screen refresh issue. I.e. when I open another program and go back to Today screen, PhoneAlarm graphics are messed up.
Click to expand...
Click to collapse
Same as the final release, 30 days.
Have you tried a different skin? I've read that there are some skins that will work with WM6 and some not, i just can't remember the name ;(
Some people also reported that if you set the startupdelay in the pa-config (~10sec.) helps, followed buy one two or sometimes even three reboots....
crazyC said:
Am using PA 1.6 b9 on black 2.0 no problems.
Click to expand...
Click to collapse
I just tried 1.60B9 again and still no luck.
but i am sure i saw some post, where people stated that PA works fine with LVSW. Please can someone confirm that?
Starting to feel like a stupid easter lamb.
chaos42 said:
I am having problems with PhonelAlarm and WM6 as well. I'm running the LSVW 26-3 edition without any problems except for PhoneAlarm.
I've tried PA 1.58 (full/lite) and 1.6B9 + 1.6B10 (full/lite) and i've no reminders for missed calls and missed sms (the others i don't use).
I also tried the new app alarmPal 0.3 (which is exactly what i need), but also no luck...
(you find alarmPal (still beta) here: http://www.pocketmax.net/smf/index.php?topic=4030.0 )
No notification, no sound ;(
I've searched allready and it seems that a lot of people are running PhoneAlarm on their LVSW Phones without problems. I also made a clean install follwing mrvanx guide and installed PA as my only app, no luck.
Maybe someone running PA could point me in the right direction.
Thanks a lot,
chaos42
Click to expand...
Click to collapse
Have you revised the profiles for the notifications configuration?
I noted that the default sounds for notifications dosn't are the corrects WAV and WMA in LVSW cause PA came preconfigured to expecific WAVs and VMA . Perhaps this files dosn't exist in the ROM version you are trying, and must to modify to select the correct audio files.
Hope this helps you.
jcespi2005 said:
Have you revised the profiles for the notifications configuration?
I noted that the default sounds for notifications dosn't are the corrects WAV and WMA in LVSW cause PA came preconfigured to expecific WAVs and VMA . Perhaps this files dosn't exist in the ROM version you are trying, and must to modify to select the correct audio files.
Hope this helps you.
Click to expand...
Click to collapse
Tried, and it seems to work. the Problem seems to be that PA and alarmPal can not play sounds from the memorycard. What got me confused, is the fact that if you select the specific sound in the pa-settings the sound files are all playing fine, but you can not use them for your reminders...
I fell a little ashamed now, because this was actually the first thing i tried but did not invetigated it deeper, because the sounds were playing fine during setup.
Thanks for your help
Now it is even working with alarmPal
love it!
chaos42 said:
Tried, and it seems to work. the Problem seems to be that PA and alarmPal can not play sounds from the memorycard. What got me confused, is the fact that if you select the specific sound in the pa-settings the sound files are all playing fine, but you can not use them for your reminders...
I fell a little ashamed now, because this was actually the first thing i tried but did not invetigated it deeper, because the sounds were playing fine during setup.
Thanks for your help
Now it is even working with alarmPal
love it!
Click to expand...
Click to collapse
I am charmed with having been of help.
This one is the spirit of this forum, and we all must to preserve it.
jcespi2005 said:
I am charmed with having been of help.
This one is the spirit of this forum, and we all must to preserve it.
Click to expand...
Click to collapse
and exactly this spirit was preventing me from throwing my tytn out of the window back in august'06 when i bought it
I was a palmOS user for almost 10 years before, and without the help of this forum and all the people here i'am pretty sure i would have gone mad about my ppc phone.
xda-developers you rock!!!
i have no issue until v1.60 beta 6.
beta 7 > got problems. pain. pain.
couldnt get it to play nice with cingular black 2.02. WOn't install at all...
Managed to get Touch Flo working tonight (between 5&6am), i am using Shadow as ROM, the steps i completed are as follows:
Install Instructions
1) install touchflo and softreset
2) Delete the bio.lnk in Windows/startup
3) Delete the reg file in HKLM/Software/HTC/Biotouch/Biotouch ver
4) Map Touchflo to any free button
5) Softreset
6) Start touchflo, then go to Windows folder and start Biotouch.exe
(These are exactly the steps i took, i dont know anything else, these just worked for me and i posted them in the hope they might work for someone else!!)
Usage Instructions
1) Press the hardware button you specified to start toughflo
2) Press the hardware button you specified to rotate the cube
3) Press the red call end button to stop it and get back to the main screen
If there are any hangs, uninstall TouchFlo and start again
There are 2 irritating things (very minor!!!)
1) Cant be used with finger like real touchflo i.e. cannot drag finger up to launch or down to exit (yet!!)
2) The hardware button rotates the screen as well as starting touchflo, this might not sould like much but, for example, if the last screen you were looking at was the Music/Photos/Videos page and you pressed the red call end button to get out of TouchFlo, and you want to go back to the Music/Photos/Videos page, you will press the hardware button to start TouchFlo, but at the same time as starting it, it also rotates the screen so it is on the page after the last page you were using, resulting in needing to press the hardware button once to start TouchFlo and twice more to get back to the screen you left off at.
As i said these are minor but this should work for now untill it is properly sorted out
Enjoy
Regards
hey
i will mod my cab and release a beta once i confirm its working.
thanks again
Awesome work guys, all of you cannot be thanked enough. It's a thankless job sometimes, but this ain't one of them! Keep it up
jasjamming said:
hey
i will mod my cab and release a beta once i confirm its working.
thanks again
Click to expand...
Click to collapse
i have done no modification to your alpha cab, i followed some instructions i found on your other site and they didnt work for me, black screens, massively slowed down Shadow, so i did it slightly differently and it worked first time, nice and fast and everything seems to be working!!!
As i said i am using your Shadow rom, no mods, my own software installed thru cabs, and using the instructions detailed above
I must say thanks to you for releasing the alpha for me to play with!!!
Thanks again JJ
P.S. is it ok to PM you i have afew questions that are off topic here!!
Regards
Bennec83
OK, this all sounds promising, but are you saying that you still cannot use your finger to do anything? That everything still needs to be done via buttons? Can you use your finger to scroll thru lists? Its progress that it is working at least, but isn't being able to use your finger the whole point? Or perhaps I'm misunderstanding you.
jomo25 said:
OK, this all sounds promising, but are you saying that you still cannot use your finger to do anything? That everything still needs to be done via buttons? Can you use your finger to scroll thru lists? Its progress that it is working at least, but isn't being able to use your finger the whole point? Or perhaps I'm misunderstanding you.
Click to expand...
Click to collapse
Dude,
First Point: it is 6:36am i have been messing with this thing since 4am, i have a disertation to research and im taking time out to do this, everyone on almost every forum(Trinity, Wizard, Hermes, other sites etc etc) wants this working, and we have it!!!
Second Point: This is an ALPHA RELEASE that basically means it only works sometimes, i have sat here installed checked it works, flashed my f'ing phone with the Shadow ROM, so there was nothing there that could possible help this work and installed it again.
Third Point: Yes the idea is that you use your finger for everything, but as the second point states this is an ALPHA, later releases will have this im surebut for now i appologise for not sorting that but im tired, y dont you try and get it working with your finger? (that wasnt ment to sound perverse but it does!!!)
i keep getting the black screen no graphics? please help ?
bennec83 said:
2) The hardware button rotates the screen as well as starting touchflo, this might not sould like much but, for example, if the last screen you were looking at was the Music/Photos/Videos page and you pressed the red call end button to get out of TouchFlo, and you want to go back to the Music/Photos/Videos page, you will press the hardware button to start TouchFlo, but at the same time as starting it, it also rotates the screen so it is on the page after the last page you were using, resulting in needing to press the hardware button once to start TouchFlo and twice more to get back to the screen you left off at.
As i said these are minor but this should work for now untill it is properly sorted out
Click to expand...
Click to collapse
Why not use the scroll weel for that? Like> up is forward and down is back
leoiden said:
i keep getting the black screen no graphics? please help ?
Click to expand...
Click to collapse
if you can give me 15 mins i have jus run into a problem with my install method, ive jus installed an app and it totally fubar'd it, now i get nothing at all!!! jus give me a sec, ill pm you wen i sorted if you like?
Bram87 said:
Why not use the scroll weel for that? Like> up is forward and down is back
Click to expand...
Click to collapse
Good question/idea!! do you know to implement that?
once i SR
it gives me blank screen again
I m running on LSVW rom
the cube
the cube works perfectly with this rom... i got no slow downs, no need to delete files or anything like that, all you need to do is map a key to touch flo
http://forum.xda-developers.com/showthread.php?t=312604
leakwoon said:
once i SR
it gives me blank screen again
I m running on LSVW rom
Click to expand...
Click to collapse
i think the thing you will find with this is the fact that this is deoendant on the ROM used too!! i cannot provide support for this i dont really know the ins and outs of it, i just posted what i did to get it to work!!!
the official link for problems and developing is here:
http://www.4winmobile.com/forums/htc-hermes/10127-touchflo-alpha-testing-discussion.html
if you read this it seems that the functionality of this is very dependant on the ROM
sgabriel001 said:
the cube works perfectly with this rom... i got no slow downs, no need to delete files or anything like that, all you need to do is map a key to touch flo
http://forum.xda-developers.com/showthread.php?t=312604
Click to expand...
Click to collapse
hard reset your phone!!! if it works then you are ok, if you get a black screen get back in the boat with the rest of us!!!
bennec83 said:
hard reset your phone!!! if it works then you are ok, if you get a black screen get back in the boat with the rest of us!!!
Click to expand...
Click to collapse
i just got it to work with Black Shadow.. but a few hours ago i installed Shap's rom and i installed touch flo and it worked perfectly, i didn't had to delete any keys or go into /windows folder or any of that stuff with schap's rom
another thing* for those of you having problems, try installing the audiomanager today plug in to see if you get different results, i have noticed that whenever the plugin is not in the today screen the cube seems to not work*
I assume this only works on a Mobile 6 Rom, and not on Mobile 4 (WM2003SE)
VoodooBOB said:
I assume this only works on a Mobile 6 Rom, and not on Mobile 4 (WM2003SE)
Click to expand...
Click to collapse
you assume right
sgabriel001 said:
i just got it to work with Black Shadow.. but a few hours ago i installed Shap's rom and i installed touch flo and it worked perfectly, i didn't had to delete any keys or go into /windows folder or any of that stuff with schap's rom
another thing* for those of you having problems, try installing the audiomanager today plug in to see if you get different results, i have noticed that whenever the plugin is not in the today screen the cube seems to not work*
Click to expand...
Click to collapse
This uses HTC audio manager so the audio plugin shouldnt matter, i have just done a sprite restore after my F*** UP, and after a hard reset it is givin me the black screen again.
Im getting really P*ssed off with this i aint slept yet, i cnt let this stupid thing beat me
bennec83 said:
This uses HTC audio manager so the audio plugin shouldnt matter, i have just done a sprite restore after my F*** UP, and after a hard reset it is givin me the black screen again.
Im getting really P*ssed off with this i aint slept yet, i cnt let this stupid thing beat me
Click to expand...
Click to collapse
lol give installing the audio plugin a try just to see what happens, if it doesn't work just delete it but if you really are that desperate install schap's rom just for a minute and try it there
sgabriel001 said:
lol give installing the audio plugin a try just to see what happens, if it doesn't work just delete it but if you really are that desperate install schap's rom just for a minute and try it there
Click to expand...
Click to collapse
Doesnt work, i dont get y someone doesnt just fix this f****** thing, 12 hours i have sat here with this, it is 8am this was a night not worth trying to help out, i understand now why people ignore you, i stupidly took a look at this coz so many people were moaning about it, i know now why i shouldnt bother 12 hours and so many attempts for nothing
not even microsofts releases have this many problems this is a joke
part 1
http://tom-love.net/ROM/TRINITY/HTC_...6.PV.part1.rar
part 2
http://www.pdaviet.com/attachment.ph...d=1187 871164
pass DAVIET
http://www.pdaviet.com/showthread.php?t=12212&page=2
one more rom from pdaviet
this rom still have bt bug
with wireless audio??
whats the bt bug?
tsaurus said:
whats the bt bug?
Click to expand...
Click to collapse
the problem is the stops when you listening music
the sounds via bluetooth disapears in 1 minute song u have 2 times or more of drops
mmm ?
Never had this kind of bug yet with ROM v3.00.07.14... BT stéréo (a2dp) works perfectly for me.
Moreover, I had more sound cut with lwsv 1.0.1.1 rom.
i dont see anything in the changelog relating to the many bugs i found in 15, to my count there are now about 6 or 7 reported bugs of which 3 require hard-reset to recover from. i have stepped over to Bepe's builds and have no problems so far.
yape me to change to bepe
Me too. I have no time to try it out without changelog just to see the "hanging at boot bug requiring hard reset" again :-(
Sorry, I love PDAVIET Roms (really complete and nice programs included) but without changelog its difficult to convince me to switch away from Bepe.
kind regards
wondering if this version is any faster?
Changelog
Translated the changelog with some help from vietnamese freinds(still needed to geuss some stuff)
PDAVIET says, this is a clean rom, they hope this fixed the reported problems with the software
CE OS 5.2.1620 Build 18125.0.4.2
uses the WM6.0 classic theme
updated to HTC_Touch_UI_HOME_2_0_720719_Kaiser (extracted from the kaiser ROM)
PP=6Mb, free RAM on boot 25-26Mb
EDIT:
Judging from the screenshots this version could actually fix all the previous problems (it looks like batterystatus was removed for now)
I advice everyone who is willing and was having problems to run some tests
I would be willing to try this rom out to test whether probs are fixed, IF, it didnt have the 3g dialer that is on it at the moment. The problem with this dialer skin and some of the others like this is that even if you disable the 3g dialer the standard dialer is still mucked up with the logo and stuff.
The reason i like to use the original dialer is that i like to be able to scroll and click on a contact and then choose which no to phone them on. The 3g dialers when you click the name it dials the last dialed no for them and does not give you the option.
Anyone know if the phone pad in landscape bug its ok know?
MJRL said:
Anyone know if the phone pad in landscape bug its ok know?
Click to expand...
Click to collapse
Yes. From "HTC_Trinity_3.00.07.13.PV" until now "HTC_Trinity_3.00.07.16.PV", it's ok.
jotam said:
Yes. From "HTC_Trinity_3.00.07.13.PV" until now "HTC_Trinity_3.00.07.16.PV", it's ok.
Click to expand...
Click to collapse
I've tried 13 and have bug. Was the last pdaviet rom that i've tried.
http://forum.xda-developers.com/showpost.php?p=1421661&postcount=20
http://forum.xda-developers.com/showpost.php?p=1428712&postcount=34
Maybe someone need to upload it to rapidshare or else. Can't download from the 1st post.
damn...
color is blue, theme sux
when I try to set background image, the image is waaaaay to bright and transparent than it should be...
Any idea how to fix it?
Thanks!
Can someone confirm if the bug of hanging screen at boot still exist if Calender is synced?
Thanks
Hi,
rjefferis said:
The reason i like to use the original dialer is that i like to be able to scroll and click on a contact and then choose which no to phone them on. The 3g dialers when you click the name it dials the last dialed no for them and does not give you the option.
Click to expand...
Click to collapse
Just for info, the 3G Dialer from Duronmarcel http://forum.xda-developers.com/showthread.php?t=321605 works fine.
You start typing the name, click on the name to see the number (2 line display) and can then change the number to be called using left and right key of D-Pad. I've cooked it into my ROM and at least with my ROM it works that way. Nice design and also working in landscape mode.
Bye.
no more calendar BUG!!!
yay!
can anyone put the links of the ROM v3.00.07.16 PDAVIET, because the links of the first page are broken.
tks
When I soft reset or turn the power off then s2u2 stops working. I am running the newest version of dutty rom atm, and the only extra application I installed is s2u2.
Hope anyone can help me here, because it is kinda annoying.
Thanks in regards
did u run the iLock application?
I had the same issue. There is some problem with iLock - it wont start. It happens from time to time... sometimes one SR helps, sometimes a few... Nevertheless I stopped using S2U2 for now...
reschu said:
When I soft reset or turn the power off then s2u2 stops working. I am running the newest version of dutty rom atm, and the only extra application I installed is s2u2.
Hope anyone can help me here, because it is kinda annoying.
Thanks in regards
Click to expand...
Click to collapse
hi check this thread i think you would find a fix for your problem!if you don't i would send you the files to over the existing exe files...cheers
http://forum.xda-developers.com/showthread.php?t=527523
thanks gonna read that thread
If I install s2u2 it also installs the I lock thingy. I think that is the one that gives the problem.
reschu said:
thanks gonna read that thread
If I install s2u2 it also installs the I lock thingy. I think that is the one that gives the problem.
Click to expand...
Click to collapse
I installed the newest version too, and in my opinion there is not only the problem with locking.
There is also an issue with consumtion from the Battery!?
So you suggest to use an older version?
Alternative to S2U2?!
Hi Guys!,
Sorry if go a little off topic, but having the same issues with S2U2, i started to look for another locking app...and i found "CSDEVCTRL" an extremely small, yet very very versatile locking application.
And the BEST THING!.....
Battery life: 3 Days and Nights!!!!, on my Blackstone HD (Dutty 3.9 XT Turbo ROM)
I highly recomend checking this out:
http://forum.xda-developers.com/showthread.php?t=386451
Here is Neopeek's frg83 build ported from HTC DREAM (no sapphire) source. I can confirm that bluetooth, wifi, and phone is working.
Please update your kernel if something is not working or if your device is running poorly. For instance, on my touch pro the screen would not wake up from sleep. The newer kernel builds have issues with screen not waking up after sleep.
--------------
Please note that this build works best on diamond100 and Fuze/Touch Pro! Of course it will also boot up on Rhodium / Topaz
--------------
FRG83 R7 Release dated 06-03-2011
Download:
Mirror1
Google Apps Installation (before you boot 1st time!!!):
* Download latest Google Apps here or here
* Create a folder "GAPPS" on your sdcard (FAT32 Partition)
* Extract contents of Google Apps to the "GAPPS" folder
As always: Use this on your own risk!
Thanx go to: Sprut, Balsat, XDAndroid-Project, Martin DZO and everyone else whom I forgot!
Installation:
Installation Instructions (Link) thanx to chase21
Please update your signature! It's always hard to find out which device / smartphone you use and which kernel(s) you are referring to!
-------------------------------------------------------------------------------------------------------
[R6]
R6:
1)http://www.mediafire.com/?t1tf39s8t54id8j
---------------------------------------------------------------------------------------------
[R5]
http://www.multiupload.com/BPRRXOABU0
---------------------------------------------------------------------------------------------
Donate to Neopeek if you like it!
----------------------------------------------------------------------------------------
Original thread here: http://www.neopeek.com/viewtopic.php?f=14&t=2183
You said BT works...? It doesn't work on ANY other build for the TP. Or any other MSM device AFAIK.
So does it pair & just not pass data or audio...? Because that is the status quo.
I'll check it out...
Yes, BT works. I tried pairing with another device and transferring file and it worked.
Do you want me to show you a video of it working?
Still trying to find a kernel that will make bluetooth and call work as in the first build, call would not work but bluetooth would..
e334 said:
Yes, BT works. I tried pairing with another device and transferring file and it worked.
Do you want me to show you a video of it working?
Still trying to find a kernel that will make bluetooth and call work as in the first build, call would not work but bluetooth would..
Click to expand...
Click to collapse
Ah I didn't realize BT works for data xfers, I should try it.
However - BT audio doesn't pass for any of our builds as of yet. Not sure if it's a kernel problem or a system problem...
Love this build data for me RAPH800 works fine. I have never had a stable phone with android but this one so far rocks. i wanted spare parts to remap end key so i put that there but all an all i love it. wifi works but under a load it drops in and out but it does this to me on most builds i still need to look at BT. Thank you for the work!!
updated link again.. Included few more apps and new kernel. Still waiting for phusson to release a new kernel with fixed power button (as it doesn't work right now). If your phone doesn't have a keyboard, please update to an older kernel image that actually has the power button function to wake it up. Otherwise, you can just slide open your keyboard to wake up the screen.
10 HRS OF TESTING
DATA--------------OK
3D----------------OK
3D ACCELERATION---OK
GPS---------------OK
IN CALL-----------OK
OUT CALL----------OK
SOUND-------------OK
INTERNET----------OK
MARKET------------OK
WIFI-------------wpa-OK wep-NO
BATTERY-----------WITH 100%.
KEY BUTTOM-------POWER.OK END.OK SEND.OK MENU.OK VOL.OK
INTERNAL Mic-----OK
EXTERNAL MIC-----NO
VIDEO VOL--------NO
AUTO BRIGHTNESS--NO
keyboard light---NO
KEY BUTTOM LIGHT--NO
BT----------------NO
CAMERA------------NO
WITH
(zImage_20101023_021801---modules-2.6.27.46-01212-ge59fdaf.tar----hw3d.RAR---)
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set cmdline "root=/dev/mmcblk0p2 init=/init rootwait rw rootdelay=3 acpuclock.oc_freq_khz=716800 pm.sleep_mode=2
lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=2,1,3 force_3d=1
force_cdma=1 physkeyboard=rhod400"
boot
really impress with this build. great job NEOPEEK & CHANN
sprint htc touch pro 2 (rhod400)
seems to be the most stable build i have used on my raph...
just one thing though what is the score with the hardware buttons.. they seem to me mapped all wrong . does anyone know how to remap them? i cant get the menu command to work in any section. im sure it used to be a short push of the home key(picture of a house) now i cant find it.
thanks
the battery life is brilliant now on this build for me but going back to the button configs ?? i cant even answer a call. i tried every button to answer and pressing the screen. it seems even doing a vulcan death grip on it i can t answer the call
If you want fully functional buttons, you will have to sacrafice bluetooth becuase of kernel problems..
http://zimages.googlecode.com/files/htc-msm-linux-20100926_001914-package.tar.bz2 <download linked to http://glemsom.users.anapnea.net/android2/htc-msm-linux/
i have all the buttons working except i press the little house(home) on my raph and it takes me back to desktop not the little pop up menu. i can now answer the calls .. i dont really need bluetooth on the android because if i need blue tootch ill just reboot the winblows phone
just looking at that build,, it doesnt mention my phone and /or button mapping in the changelog. how would i get buttons working ..
thanks
hvc123 said:
i have all the buttons working except i press the little house(home) on my raph and it takes me back to desktop not the little pop up menu. i can now answer the calls .. i dont really need bluetooth on the android because if i need blue tootch ill just reboot the winblows phone
just looking at that build,, it doesnt mention my phone and /or button mapping in the changelog. how would i get buttons working ..
thanks
Click to expand...
Click to collapse
HOME now = HOME. I believe the center button is now MENU.
yer that makes sense but the centre button ( centre of the joypad thing) takes me to home too
hvc123 said:
yer that makes sense but the centre button ( centre of the joypad thing) takes me to home too
Click to expand...
Click to collapse
Uhm... that shouldn't happen. Does it happen on the 'standard' XDA builds? Make sure you're using a new kernel/rootfs.
i dont know but other than that this is far the best ver of droid i have tried. im trying to live without the menu for the moment but its getting a little difficult
hvc123 said:
i dont know but other than that this is far the best ver of droid i have tried. im trying to live without the menu for the moment but its getting a little difficult
Click to expand...
Click to collapse
Can't really help you then if you're not willing to respond to my questions...
dude im at work... itll have to wait to try other builds. im in uk
and saying that im not willing to answer your questions christ you sound like my X wife
hvc123 said:
dude im at work... itll have to wait to try other builds. im in uk
and saying that im not willing to answer your questions christ you sound like my X wife
Click to expand...
Click to collapse
Yea, still not sure how you expect me (or anybody for that matter) to help you. Either way, make sure you're up to date as you've been told before. If that fails, try XDAndroid to see if that resolves it.
tell you what mate forget it.
i was originally asking how to remap hardware buttons as my menu does not work.
i will try l8r builds when i get home and not here at work as i dont have the capabilities to put the stuff on my phone here.
again you write like my x wife writes emails. i dont "expect" anything i was mearly asking a question.
when i tried xandroid 2.1 the menu button was the home button. that was the last xandroid build i tried.
i may as well get the source code and edit the button config myself then build it.
does any one know before i go on a hunt if there is a build root for the uk raph ?
hvc123 said:
tell you what mate forget it.
i was originally asking how to remap hardware buttons as my menu does not work.
i will try l8r builds when i get home and not here at work as i dont have the capabilities to put the stuff on my phone here.
again you write like my x wife writes emails. i dont "expect" anything i was mearly asking a question.
when i tried xandroid 2.1 the menu button was the home button. that was the last xandroid build i tried.
i may as well get the source code and edit the button config myself then build it.
does any one know before i go on a hunt if there is a build root for the uk raph ?
Click to expand...
Click to collapse
Sheesh, you act like I'm asking for alimony or something. Anyhoo, here's the source tree for the rootfs. Remapping buttons isn't very straightforward, but you seem aware of what needs to be done.