Has anyone managed to get this working on an HD?
I have even gone back to get a fresh copy of the trial version, but no dice. Can anyone confirm if it is just flat out not compatible?
Thanks
also tried , didnt work
Same here, but can't get it working.
So did I. Seems to be non compatible... If anyone knowd how to get it going ...
doesnt work for either ........ darn sad
The following Microsoft thread suggests that it is an incompatibility with the vga/wvga resolutions, and that a new version is being worked on.
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/90698c93-00ca-499b-b1d1-db116d59ebc3
We'll have to wait and see if it really happens.
Related
I had it working on WM5 (of course since the app was made for WM5), curious if anyone has gotten it or an alternative to work on WM6. It seems to be the only thing I can't get WM6 to do. Everything else works great.
Never mind. Can a mod delete this thread? I guess I am tired or something, I got it working.
How did you get it to work? Using what program? I used Siriuswm5 on wm5 but keep getting a native error message( this is not the only program I get that error message for) anytime I try to start it. SiriusCE would load just fine but I could never figure out how to start the music.
I do have a Sirius account and am running WM6..is anyone doing this successfully??
morganjokc said:
How did you get it to work? Using what program? I used Siriuswm5 on wm5 but keep getting a native error message( this is not the only program I get that error message for) anytime I try to start it. SiriusCE would load just fine but I could never figure out how to start the music.
I do have a Sirius account and am running WM6..is anyone doing this successfully??
Click to expand...
Click to collapse
I hadn't disabled the proxy, thats why it wasn't working at first. I didn't install Siriuswm5 onto WM6, I upgraded to WM6, then later tried running the SiriusWM5 install files located on my Card and it worked fine through all versions of WM6 that I have ran. I will say I usually use it while connected to the computer or WIFI, I haven't done much with sirius over cellular. And it does drop the connection after a certain amount of time, but I think it's because of that new pop up that is on sirius online that checks to see if you are listening and it can't pop up on the siruis WM5 software.
I'm still iritated that I have gone through most the tricks/software installs I have found on here and still can't get Youtube to play and my buddy sitting with his new Iphone brings it right up.
Are you making sure to disable the proxy?
Disable the proxy through the proxy manager? Is that what you mean I tried that to no avail. I get the same "A native exception occurred" error when I try to run live search or siriusWM5. Both of which say they are for WM5 and earlier. But I keep reading about other people running them just fine. Who knows..I will just keep playing with and maybe I will work it out!!
I found a thread somewhere saying that the .net compact framework had caused that problem for some. I un-installed it and all of the programs that I couldn't get to work now work great!! I know have absolutely no complaints about WM6!!!
morganjokc said:
I found a thread somewhere saying that the .net compact framework had caused that problem for some. I un-installed it and all of the programs that I couldn't get to work now work great!! I know have absolutely no complaints about WM6!!!
Click to expand...
Click to collapse
I wonder if that has already been taken off of the WM6 roms I have been running. Guess so.
anyone out there ???
anyone out there care to share how they got sirius working?
like what settings are set to?
i keep getting this audio codec not supported --- that is with tcpmp
with windows media player it was a different error....
any ideas
nicolicious1234 said:
anyone out there care to share how they got sirius working?
like what settings are set to?
i keep getting this audio codec not supported --- that is with tcpmp
with windows media player it was a different error....
any ideas
Click to expand...
Click to collapse
do you have this version?
http://www.geekstoolbox.com/
I keep getting that I need a newer version of net framework.
sorry for my ignorance but wht does Sirius do?
hey guys whats up
ive noticed this problem for a while now...
i have a cingular 8525, over my stay at xda developers ive gone thru many roms. curently im running schap's 4.20lite (great rom btw) | radio 1.48.00, and when i would run live messenger i noticed no one would messege me, after asking a bunch of ppl on my list they said i was offline... so i reset the phone, same thing happens, tried signing in offline and then changing it back to online, still didnt work... so im lost.
can anyone give me any answers or a solution...
sign in online? which version are you on? i'm on 1600 and it works fine.
the live version is 10.6.33.0600 .... could u attach your version? thanks in advance
hi guys, does anybody knows if bbconnect works on hd
Tried version .103 last night - not yet working (i.e. no PIN) will investigate further with other versions when I have a little more time and report back - anyone else working on this with any success please share?
Thanks
Any luck making the HTC Touch HD work with BBC-Blackberry Connect (BES)? I am still stuck in "PIN pending" on my side whatever I do... Thanks for letting me know.
Otherwise, the HTC Touch HD is definitely the best HTC device I have used since converting from Blackberry; I would hate to have to go back to BB devices, even though the Storm seems to be a giant step up (but no Sling player, no Kinoma Player, etc.).
28Wagram (A Frenchman lost in the US for the last 10 years...)
obviously i am having the same result as you guys trying to use version .100 This version worked on my touch pro. going to try a few version and see what i can get accomplished here
Versions Confirmed NOT working:
.103
.100
.92
.91
.90
.84
.67
These are the only versions I can find so I can say its a no go for now.
Did you try changing registry setting (HKLM\System\Versions Aku set to for example .0.4.2?
JMes said:
Did you try changing registry setting (HKLM\System\Versions Aku set to for example .0.4.2?
Click to expand...
Click to collapse
no
I took your advice, changed it and soft reset. I then installed version .103 and PIN still reads pending. What version would you recommend for this setting? I dont want to go through them all again haha. I also tried th eone that worked on my touch pro (.100) and still no PIN.
I would not know what to recommend. My previous suggestion came from my experience with the TyTn II but I suppose the value to use is device dependant. Maybe another user can help us on this
I hope that you succeed because my decsion to the Touch HD depends on whether one can install Blackberry Connect.
Please let us know if you manage to make it run.
I have a corporate Vodafone BES blackberry account - have bbconnect .103 install - had NO PIN for days but .... my PIN has finally arrived - seems Vodafone have added the HD to the supported devices list!!!!!!
.
BB Connect
version .103 was stopped after 5 minutes. I had PIN and everything, now I have nothing , no connection no PIN
Same here in the US, on AT&T/Cingular, with BBC .103. Five minutes of heaven, PIN out, connection, and then... nothing - No connection any longer. Keeping my fingers crossed...
Guys , any news on this topic? It would be nice to share your success with us! Thanks, Thorsten
i still havent had any luck. i am monitoring his thread which seems to have good info but they are still stuck as well
http://www.sems.org/entry.asp?ENTRY_ID=276
mallman said:
i still havent had any luck. i am monitoring his thread which seems to have good info but they are still stuck as well
http://www.sems.org/entry.asp?ENTRY_ID=276
Click to expand...
Click to collapse
Pulled this from Sems website -
Hi
Just to confirm
BB Connect Version .103 is working on my HTC Touch HD !!!!
This is cool
Posted by Piotr on 11/15/2008 @ 7:38 AM
version .103 on Touch HD is no longer working . I had PIN was in a middle of synchronization and connection was stopped , i don't know why
Posted by Piotr on 11/15/2008 @ 10:26 AM
Click to expand...
Click to collapse
Seems like were all in the same boat - I'm checking daily for updates - I think we'll have to wait for RIM to issue a new version of bbconnect (maybe a .105 version) as they did with the Pro before we see this working properly.
If anyone else has any updates or thoughts then let us know!
.
Status
So I've got Touch HD on Vodafone UK and installed Blackberry Connect v 4.0.0.103.
Seems to have registered with the network as I have a pin code but struggling to get services activated with company BES.
Try to connect to Desktop Software (v4.0.0.22) but get a cannot connect to device error code.
Saw someone posted success with a Vodafone UK SIM - could you post the specific versions of desktop software et al and whether you were connecting to a company BES?
Feel like I'm a step or 2 away from a perfect phone
Thanks,
John.
but for the specification they mentioned about they don't have Blackberry support, right?
I'm also following this thread HERE apparently theres a version 1.0.0.104 about but I'm sceptical - lets see?
If anyone else comes accross the .104 version on their travels (searches) then please share!
.
Blob8me said:
I'm also following this thread HERE apparently theres a version 1.0.0104 about but I'm sceptical - lets see?
If anyone else comes accross the .104 version on their travels (searches) then please share!
.
Click to expand...
Click to collapse
i will keep my eyes peeled. Did a few searches and didnt come up with anything but hopefully you are correct
I have found .104 however it does not work sames issues are present. Looks like operator specific release
tarkanuk said:
I have found .104 however it does not work sames issues are present. Looks like operator specific release
Click to expand...
Click to collapse
where did you find .104 - can you share this either by url address or the .cab itself despite your continued problems please so I can take a look too please?????
Thanks.
.
Found the link to .104 >>HERE<<
I'll test later but if others have success then please share..... I'm on Vodafone UK (Blackberry BES Service) by the way......
UPDATE: Installed - indeed its .104 but alas as per tarkanuk still no PIN..... we'll have to wait a little longer it seems.....!
Keep trying guys.....
.
Hi
I haven't found anyone else in TP2 forums report this problem I have on reboot, but can anyone help? After inputting my PIN, a screen comes up stating "We're Sorry... A problem has occurred with services.exe" and it asks if I want to send a report to Microsoft, but if I click either "send" or "don't send", it then appears to function normally.
I, too, have this problem, but hesitated to bring it up here because my assumption was that it must have something to do with a tweak I have done or some software I have installed (and then subsequently uninstalled?). As such, the parameters are too broad (I would have thought) to be able to determine why this is happening. Are you also working with an AT&T Tilt2, stock ROM?
I too have this problem, if it occurs overnight, my alarm will not go off, and it get stuck on the time that it happens until i click ok. kinda sucks
I had it - tech support (AT&T) exchanged the phone
I had it - tech support (AT&T) exchanged the phone
It was within the first thirty days
my 30 days is up
Also got it with my TP2. Dutch stock rom windows mobile 6.5
Also getting the error after a restart sometimes, or randomly in wimo 6.5. Never had it until my wimo ran out of power when playing a game... It shutted off on it's own. Now i randomly get that error so once in awhile. I even did a hard reset, but still getting it sometimes. But not always after restarting...
Bit strange... Don't notice anything not working though. Everything seems to be working fine... Is there a way to disable error reports in wimo?
Sephi- said:
... I even did a hard reset, but still getting it sometimes ...
Click to expand...
Click to collapse
Wow, thanks for the info -- I was actually considering a hard reset because of this -- you've saved me the trouble!
pistou said:
...Are you also working with an AT&T Tilt2, stock ROM?
Click to expand...
Click to collapse
I have stock HTC 6.5 ROM (WWE). It's not a major problem and only occurs if I reboot - luckily it does not happen randomly for me or when unlocking or switching the phone transmitter off and then on again.
agrickard said:
It's not a major problem and only occurs if I reboot.
Click to expand...
Click to collapse
Now, on reboots I'm also getting an error message about gwes.exe -- comes right after the one about services.exe.
I get it too. Stock Rom with plenty of apps and stuff added.
Me Too
I started having this and other errors after installing Hou Ming's fexploreext205. I had just started to look for a replacement when I ran across this thread.
nycny said:
I started having this and other errors after installing Hou Ming's fexploreext205. I had just started to look for a replacement when I ran across this thread.
Click to expand...
Click to collapse
Darn, I don't have this app installed, but this line of investigation may yet yield results. I'm going to try to see if I can figure out the history of my installs (good luck!).
OK, I bit the proverbial bullet and did a hard reset. It's taken me a couple of days but I've got all the software re-installed (with a soft reset after each install! -- more or less) and so far so good: no service.exe (or any other) errors. Let's just hope there isn't some periodic thing that will trigger the error down the road.
I just downloaded and upgraded my Touch Pro2 now to the WM6.5 for GCC and Egypt. However, anytime i do a soft reset i get the following error message:
A problem has occurred with services.exe
And then the blah-blah about telling Microsoft about this problem.
This doesn't happen however if i shutdown and the restart the Touch Pro 2.
I have done a hard reboot and still i get this error. I have posted this on HTC support site. Let's see what they say.
Now appears cured!
azuka said:
I have posted this on HTC support site. Let's see what they say.
Click to expand...
Click to collapse
For some reason I now don't get it. I have no idea why as I haven't been trying to solve it specifically and have not hard reset!
@azuka: Please let us know what HTC say.
i also have this problem..
using stock 6.5 WWE SEA rom
happened after installing some programs..
however doesn't seem to affect or give any problems after
clicking don't send or send ..
would love to know why this occurs tho..
thx
Same thing happened to me. I have the new leaked t-mobile 6.5.
I did the hard reset and it happened to me again after i installed a few programs so i decided to reflash the with the t-mobile rom again and thank God it hasn't happened since the morning. i have been installing the programs one by one with a soft reset right after every new install trying to recreate the problem but it hasn't happen..
i hope it stays that way.
I have the original HTC rom (ITALIAN) and I have this problem if i deactivate Manila and i activate Titanium interface. I think there is some program that try to "talk" with manila during boot.
Now I enabled Manila again and it works like a charm.. (But I miss Titanium interface.. )
HTC simply asked me to download the WM6.5 upgrade again and reinstall. This i did and surprisingly i have not received that error again. 3days+ now and still counting.
So I was googling about the Wildfire Wifi-n "support".
And I came upon this: http://www.gadgetsdna.com/how-to-enable-wireless-n-on-htc-evo-4g/4108/
Question is: Would this work with our WF?
Just tested it, I dont know wether it works or not, seeing as the guide says there are 2 spots where HTC placed "nmode" and i could only find one. I altered the file as proposed in the guide, replacing with a series of 5 dashes, pushed it back to the phone and it seems to work fine. WiFi turns on, i dont suppose there's any way to test wether it truly is n now or not?
Well, thanks for being a gunny pig XD
And I'll be able to see if it works, since I've got a n at home >-<
HOLY **** IT'S WORKING!
**** YOU HTC (AGAIN) FOR DISABLING IT D: