Develop Bugs

Something weird about WIZA 200

Well, i tryied to see what information i retrieve with the french rom of qtek 9100 executable, u know, the screen in wich u can get info about the device language, image versiion and model make. Followed the standard procedure , CID unlocked, backed up the rom, no need to sim unlock cbecause it was no locked. Here comes the weird part: the screen that was supposed to return the info (where u still can quit),didn't return any info, it was like upgrading nothing to nothing. It's a g3 and i did the normal way to CID unlock it. now whehn i reboot the phone, the SPL remained the same (1.01), but the IPL has changed from 1.01 to IPL 1.01.0000. Why those four zeros?...neve knew.Anyway i didn't installed any rom , because of no info on that screen...was afraid not to damage my device . If i want to install a new rom do i have to CID unlock again, even if i didn't installed any?

Something weird about WIZA 200

Well, i tryied to see what information i retrieve with the french rom of qtek 9100 executable, u know, the screen in wich u can get info about the device language, image versiion and model make. Followed the standard procedure , CID unlocked, backed up the rom, no need to sim unlock cbecause it was no locked. Here comes the weird part: the screen that was supposed to return the info (where u still can quit),didn't return any info, it was like upgrading nothing to nothing. It's a g3 and i did the normal way to CID unlock it. now whehn i reboot the phone, the SPL remained the same (1.01), but the IPL has changed from 1.01 to IPL 1.01.0000. Why those four zeros?...neve knew.Anyway i didn't installed any rom , because of no info on that screen...was afraid not to damage my device . If i want to install a new rom do i have to CID unlock again, even if i didn't installed any?

Back to Original ROM and CID Lock

Dear Friends;
I've done HardSPL and installed Cooked ram (downloaded from XDA) several times, but recently I heared that by installing non-original ROMs the Guarantee will be invoked. It is easilly possible to back to original ROM but is it possible to back to original CID lock as well? I dont want loose the Guarantee....
I will be appreciated if the firends kindly help me.
Best Regards
Darius

As far as I know you can go back to your original SPL, but dont quote me on it.
Wait for a better answer from someone more experienced.

at the same place where u got the hard spl, the author probably provided the stock spl for warranty purposes.
so what u need before u send it back to service is:
stock spl, stock rom, and stock radio (probably u remember which came with it).
any ways, just read the hard spl thread, and u have the answer.
don't do nothing without first reading what u are doing

easy!
hi, simply install an ORIGINAL HTC rom and it return with rom and original CID.
Bye, felix

AFAIK installing another rom also the HTC default ones are not giving back the CID when u unlocked it, if you wrote the CID down you can do it with the CID unlocker of OliNex there u can write in the CID u want to set.
The problem with stock SPL is dicussed many times ! a whole thread is there for that.
Greets
ps. http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39

Step by step guide is here post #39
http://forum.xda-developers.com/showthread.php?t=400950&page=4

Back to Original SPL
Dear Friend;
I've done all steps and successfully installed stock SPL 1.93.0000 but in bootloader v0x32 is mentioned while it seems it should be v0x30 (as smae as my friends' Diamonds), anybody knows how can I fix it?
Regards
Darius

[TUT] HOW-TO restore Diamond to stock for warranty

Due to a hardware problem in my Diamond I needed to restore it to manufacturer default. I didn't find a guide to this and since I've done the research anyway I thought I'd put together this little tutorial as the information was somewhat scattered around the forum. I hope this guide will be of use for the community.
My phone was originally branded and sim-locked by 3. After I was through with it, it was SIM-unlocked, security unlocked and had HSPL, custom ROM and a radio ported from another device. The steps below is what I did to restore it to stock. All steps might not be neccessary for you. This procedure might also work for other devices than the Diamond, but of course you need other versions of SPL, ROM etc.
1. Backup everything on your phone to your computer - use activesync, PIMbackup etc and make a copy of your Internal Storage.
2. Make a hard reset (hold vol down + enter and soft reset) and chose to format moviNAND. This step is only neccessary if you want to wipe your Internal Storage before you send the device in for repair, but I recommend it.
3. Go to www.htc.com and download the latest stock ROM (includes stock radio and SPL). You find it under Support and you enter your s/n to get the correct stock ROM for your device, complete with branding for your operator. You can also find stock ROMS here: http://forum.xda-developers.com/showthread.php?t=471699
4. Flash the stock ROM. Now you have stock ROM and Radio on your device. Stock SPL will not be installed until you've replaced HSPL with an older stock SPL and flashed ROM again.
5. Get RUU-SSPL and stock SPL from HERE:
http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. I used the stock 1.93 SPL. Some instructions and info about restoring stock SPL is in the linked post by cmonex and due credit goes to her. I will repeat some of that info to keep this guide step-by-step. EDIT: Stock SPL 2.03 can be found here: http://forum.xda-developers.com/showpost.php?p=3359191&postcount=390
6. Put the .nbh file from the SPL you downloaded into the same folder as the extracted contents of RUU-SSPL-withoutNBH.zip and run the RUU. This flashes an old stock SPL.
7. Flash your stock ROM from step 3 again. This step is neccessary to get the correct stock SPL on your device, eg. the one that corresponds with the stock ROM you've downloaded in step 3. It was not installed in step 4, because then you still had HSPL. In step 6 you've installed a stock SPL and now the correct stock SPL will flash along with the stock ROM. After this step I got SPL 2.03 on my Diamond.
8. Remove the Security Unlock from your device using the instructions and Security Relocker by Olinex from this post by cmonex: http://forum.xda-developers.com/showpost.php?p=3299516&postcount=492
Now, my Diamond is still SIM-unlocked. I have not managed to find any info about how to restore the SIM-lock, but it is hopefully not neccessary for warranty. As far as I can tell, the unlock doesn't show anywhere, but of course all they need to do is to try a SIM-card from another operator...
If anyone has info about how to restore SIM-lock, then I'll update this guide with that info.

good job...
moderator make this "sticky"

3dward87 said:
good job...
moderator make this "sticky"
Click to expand...
Click to collapse
I second that, it contains links to stock ROMs, that'll hopefully stop a million topics about it lol.

This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..

Da9L said:
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Click to expand...
Click to collapse
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.

where can i read more information about jumpspl, how it works and everything?

eranyanay said:
where can i read more information about jumpspl, how it works and everything?
Click to expand...
Click to collapse
Look in the Xda-wiki, search and google, and not just in the Diamond section.

sticky please
this needs to be a sticky topic.

losdrivare said:
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
Click to expand...
Click to collapse
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.

Da9L said:
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Click to expand...
Click to collapse
Sorry to hear it and I'm afraid I'm out of ideas. After all, my little tutorial is primarily aimed at those whose Diamonds have working screens...
On another note, my Diamond came back from warranty repair and the repair shop had not noticed anything that would void my warranty. In the meantime I got myself a Topaz and now I've sold my Diamond, but I'll be checking this thread from time to time.

Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)

donsalari said:
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
Click to expand...
Click to collapse
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.

losdrivare said:
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
Click to expand...
Click to collapse
Very true!!! Ok cool... Flashing back to stock!!
Thanks..

Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.

Da9L said:
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Click to expand...
Click to collapse
Another idea: maybe you can find some a VNC program that also works the "other way" with windows mobile, so that you can get a window on your PC with the screen of your device?

Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...

Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me

bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi

herpez said:
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Click to expand...
Click to collapse
k3nnyboiboi said:
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
Click to expand...
Click to collapse
If you manage to install ANY stock SPL and then flash the correct ROM for your country and operator then you automatically get the correct SPL too, since stock ROMs include SPL. If you go to htc.com and type in your s/n then you automatically get the latest ROM for your device and operator.
k3nnyboiboi said:
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
Click to expand...
Click to collapse
I only link to the SPLs provided by olipro and cmonex in the hard-SPL thread. If you need closer info about SPLs I suggest you ask there. I only tried to revert back to stock SPL 1.93 myself and it worked just like described in first post.

Thanks Op
Managed to restore it no problem, but took ages

Dopod s900 [Cannot change the language to ENGLISH]

I just got the phone from Shanghai, from my dad. He's tried to change the language for me, but even though it's set as English (Canada), it's still all in Chinese!
I've been researching all day and looked through all the websites. I have downloaded numerous ROMs which could possibly help me. I downloaded the ones with WWE or UNI in their names so that they'd turn my phone's language to English I believe?
I attached screenprints of what it looks like.
Everytime I tried to sync them, it would immediately restart my phone, the phone will go to the coloured screen,then will turn white and have a bar that stays at 0%. Then on my computer it would say:
[ERROR 262] Update Error
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
--------------------------------------------------------------------------
While in its multicoloured screen:
"DIAM120 MFG 64M
SPL -1.30.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v8x32"
I have no idea what they mean except that I think I need to upgrade my SPL in order to install the HardSPL that I downloaded. It says I need a version 1.40. something..but I don't know how to get that. I went to the official website and my serial number would not work for the downloads in the support section.
I'm stuck and I couldn't sleep because I've been trying to fix this problem! Ugh please help me. I've seen posts where other people have solved similar problems but their solutions do not apply to my case. I don't care about how difficult it may be. I just want my phone in English! I have no idea how to navigate around the phone in Chinese.

Check this out http://forum.xda-developers.com/showthread.php?t=400950
Choose unsigned hardspl olinex first, If still cannot flash, do hardspl 1.93 olinex.

I tried the file Unsigned-Hard_SPL-Diamond-OliNex.zip
and clicked on the file ROMUpdateUtility
and it worked!
I don't know what this did for my phone...but I think it has a new SPL? What do I do from here to make my phone english?
It's currently still in mandarin or something. I want to download the right ROM but I have so many...which should I try? Do I run HardSPL before or after flashing?

I have the following files:
HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship
HER_DopodAsia_1237074_1060010_WWE_SHIP
JASJAR_ME_13082_171_10900_wwe_ship
RUU_Diamond_hTC_Asia_HK_WWE_1.93.831.1
RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
UNI_DOP_OP_130108_130219_11100_CHT_Ship
UNI_DOPOD_ASIA_130111_130230_11100_WWE
Which should I try? some of them do not display the picture of my phone. Therefore should I not flash those?

I just tried flashing all of the files that displayed a photo of my phone..
It would immediately turn off, go to the coloured screen, and then go to a greyish white screen showing a percentage bar. It would stop at 1% and restart my phone. On my computer, it would say "Error 244: Invalid Model ID" Sorry for posting so many times..
Right now my phone's rom is still: 1.93.706.1 CHS (which i believe means chinese?)

Now you have to flash RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip from link above. the 244 invalid model also happened to me before i flash 1.93 version. you have to flash hardspl before the rom.
My personal opinion don't flash official rom that you wrote above, because it will take many memory. Choose cooked one.
For the best wm6.5 rom http://forum.xda-developers.com/showthread.php?t=593678
For the best wm6.1 rom http://forum.xda-developers.com/showthread.php?t=408109

You may want to start with reading the stickies on the top first. There you will find all necessary information.
e.g. http://forum.xda-developers.com/showthread.php?t=416211
Basically, after the HardSPL you are able to flash one of the cooked ROMs (and thereby to change the language of the ROM to English /WWE).
You may want to change the Radio as well.
If you got a Dopod version of the Diamond (for mainland China) you will lack of WLAN support regardless the ROM.
Good luck!

IT WORKED! thank you SO much. I'm extremely ecstatic. <3