Related
Hi,
Basically I looked through loads of problems people have had with S2U2 but couldnt find what I was looking for.
Whenever I install the program the bar to move across is always way too small and only covers the left hand side of the screen. I checked the settings but couldnt find a way to increase the size of the bar. Anyone got any ideas about how to do this?
Another problem I have is whenever I close down opera I get a error message. This just started all of a sudden and I really don't understand why this happens. All I have installed on my HD is HD Tweak and S2U2. I know this problem is unrelated to the first but I thought it would save creating a seperate thread =-)
S2U2: -Make sure you downloaded VGA/WVGA version, not the QVGA version.
I just got my new TP2 and want to replace the opera that opens from the internet tab from the previous version to the new 9.7.
How can I change this?
Thanks.
good point, i wouldnt mind doing the same thing, but TF3d integration is a bit of hassle.
I am sure it will install it as a separate app, and you'd be able to use both, but replacement would be much nicer.
All Opera Mobile versions thread
Have a look, I´m sure it will help:
http://forum.xda-developers.com/showthread.php?t=486502
hmmm it really dont wrok too well for me..
i mean the beta...
thanks for the advice orb3000 I couldn't see the answer in this thread, but I'm surprised it hasn't been asked and answered before.
Can anyone clarify how this can be done? This thread could then be tidied up and put as a sticky for future reference
You should read more carefully....
This method has worked for me, only drawbacks:
1. The bookmarks in TF3D don't work anymore
2. Soft zoom slider doesn't work anymore
3. Opera autloaunches on soft reset
If anyone can solve any of the above that would be great! Still 9.7 is far better over 9.5 IMO.
Hi,
I've noticed that the Manila 2.5 responds faster than the older versions - I mean the time needed to load the content of a tab after navigating to it. And I mean the time's shorter not on the HTC HD2 (that's obvious with the Snapdragon and ~450MB RAM), only on my Touch Diamond. I guess it's because HD2 has more RAM and the content of every tab is loaded to the memory at the start of Manila, not when navigating to it.
So my question is if it is possible to tweak Manila 2.1 to load the contents of each tab at the start of the system. I know it would consume more RAM, but it would be much, much faster.
I hope someone will be interested in this
Cheers,
Kamil
Kamill said:
Hi,
I've noticed that the Manila 2.5 responds faster than the older versions - I mean the time needed to load the content of a tab after navigating to it. And I mean the time's shorter not on the HTC HD2 (that's obvious with the Snapdragon and ~450MB RAM), only on my Touch Diamond. I guess it's because HD2 has more RAM and the content of every tab is loaded to the memory at the start of Manila, not when navigating to it.
So my question is if it is possible to tweak Manila 2.1 to load the contents of each tab at the start of the system. I know it would consume more RAM, but it would be much, much faster.
I hope someone will be interested in this
Cheers,
Kamil
Click to expand...
Click to collapse
if the dll are modules then the page opens faster.
while cooking is the dll s are rec modded the the tab response is slower..
So it can be done while cooking a rom, right? Sorry, but I'm a noob in this topic It would be great to have the tabs respond faster, even if the memory usage would grow much!
Anybody's got another idea how to make the tabs open faster?
I've tried to make the sms tab load less messages, hoping that this would make it load faster ...but it did not help at all. It takes about 2,5 seconds to load the sms tab! I (and I guess that many other people) would be very happy to shorten that time - any ideas?
I'm also interested in this.. I use laurentius ROM on my HD which is the fastest I've ever tried, but switching between tabs still takes a few seconds which is really annoying!
I'm still trying to do something with the content of the tab showing up slow and I need some help. I partly understand what's happening on the release of the slider over a tab. The slider icon is moved (TabJumpTo function) and the Navigate function is activated - and here's the problem. There's a line:
Code:
_application.Navigation:Navigate(...)
What is _application? I've seen that you can set/get registry values thanks to this, but where is it defined?
What I want to do is load all of the tabs' content while loading Manila and set it to invisible. After releasing the slider over a tab, the content of the tab would be set to visible. I think this should work, but I need to know what is _application
I hope someone will be able to explain me! Thanks in advance.
I was looking for that too, but then I got an idea - the home tab is always preloaded, isn't it? at least it is faster than any other tab, so I guess yes. I did some small searching and I found something interesting: fakehome. I don't understand LUA well, but it seems that the home tab somehow uses something called fakehome to keep preloaded data and graphics. But I also may be completely wrong
It's good to see that someone is also interested in this topic Unfortunately, fakehome is a mode9 file and there's nothing important in it.
I solved the problem of the slow message tab. The reason why it was opening so long was the number of messages in my inbox - over 1600... Now I have about 50 and it's much faster.
Kamill said:
It's good to see that someone is also interested in this topic Unfortunately, fakehome is a mode9 file and there's nothing important in it.
I solved the problem of the slow message tab. The reason why it was opening so long was the number of messages in my inbox - over 1600... Now I have about 50 and it's much faster.
Click to expand...
Click to collapse
bummer
Try to cook without HTC Task Manager....
Only MS Task Manager.
Would it really speed up Manila? I don't see any connection between these two things...
I also noticed the lag on the messaging app, and subsequantly deleted all my messages. However, ive accepted there is going to be lag with it and its just the trade off of running sense 2.5 on the touch pro 2.
Something ive noticed though is there a slight delay u get while scrolling sliding from the home tab on the tf3d to somewhere else, and how this lag aint there when starting from a different tab.
Is there any way to solve this and to make scrolling from the home tab quicker? Apart from this I am very happy with the new rom despite some hickups (which are to be expected due to the lack of snapdragon)
Really i don`t understand why you want app like this when you can do it without app hacks etc.
I know one things very easy and im doing it from 2 years since i have Blackstone
Example after rebot .. wait the whole OS to be loaded etc, once is loaded you click on everytab and wait for the animation, after you do this for all the tabs, they are NOW loaded in some cache and your Manila is faster.
All this take you around 5 Seconds and no need any App.
Also click once da dialer and close it ...this will help your dialer to open faster next time when you use it.
fade2black101 said:
I also noticed the lag on the messaging app, and subsequantly deleted all my messages. However, ive accepted there is going to be lag with it and its just the trade off of running sense 2.5 on the touch pro 2.
Something ive noticed though is there a slight delay u get while scrolling sliding from the home tab on the tf3d to somewhere else, and how this lag aint there when starting from a different tab.
Is there any way to solve this and to make scrolling from the home tab quicker? Apart from this I am very happy with the new rom despite some hickups (which are to be expected due to the lack of snapdragon)
Click to expand...
Click to collapse
Yes, please! Anyone know how to speed up the slider when starting from the home tab? My slider is superquick starting from any other tab. There must be a fix as I've tried a few other ROMs and they seem to have gotten it worked out.
I've been looking all over XDA and the Internet for this one. There's mods for it, custom ROMs that use it, and even a utility to tweak it. But as many times as I can find it referenced, I can't find a TouchFlo 3D 2 panel for the Xperia. I am running this TF3D for the Xperia (thanks itje) as well as the extra Cab that turns it into a panel, and the workaround that makes it have an acceptable landscape version. Now, I've clearly missed something, because many other people seem to have this on their X1's with no problem. Can anyone point me in the right direction?
Also, I am not interested in a ROM version. If that is all there is, then please tell me about it, but I would much rather have it in a cab file if that does even exist.
?
Triforce1 said:
I've been looking all over XDA and the Internet for this one. There's mods for it, custom ROMs that use it, and even a utility to tweak it. But as many times as I can find it referenced, I can't find a TouchFlo 3D 2 panel for the Xperia. I am running this TF3D for the Xperia (thanks itje) as well as the extra Cab that turns it into a panel, and the workaround that makes it have an acceptable landscape version. Now, I've clearly missed something, because many other people seem to have this on their X1's with no problem. Can anyone point me in the right direction?
Also, I am not interested in a ROM version. If that is all there is, then please tell me about it, but I would much rather have it in a cab file if that does even exist.
Click to expand...
Click to collapse
hmmmm this is where i got the cab and direction for manila 2.1 as a panel...back when I wasnt on 2.5 LEO
http://forum.xda-developers.com/showthread.php?t=441439
this will more than likely get ya the same stuff though...to be honest with ya, you should take the plunge and flash a rom!
there are plenty that arent buggy and very stable
Thanks for the help. I had (as I thought) overlooked the obvious. Fixed up now, and couldn't be happier. And to your second thought, I have tried flashing ROMs in the past. Not difficult and relatively safe as long as instructions are followed. Frankly though, I think I'm one of the few who actually likes the original stuff. Reset it all to factory and updated to R3A, now I'm set. As it is, I needed it back factory to take advantage of the warranty; need a new one because of some pretty bad case cracking. Everyone seems to be familiar with that one.
Anyway, thanks for your help.
Should the zoom bar work with Opera 9.7? I've just installed the latest Jacko S2 ROM and the zoom bar doesn't do anything. Is there a reg setting which enables it?
itm said:
Should the zoom bar work with Opera 9.7? I've just installed the latest Jacko S2 ROM and the zoom bar doesn't do anything. Is there a reg setting which enables it?
Click to expand...
Click to collapse
See post #2 in the thread below. If there is an issue with a particular ROM, you should post to that ROMs thread, if you haven't already.
http://forum.xda-developers.com/showthread.php?t=486502
redpoint73 said:
See post #2 in the thread below. If there is an issue with a particular ROM, you should post to that ROMs thread, if you haven't already.
http://forum.xda-developers.com/showthread.php?t=486502
Click to expand...
Click to collapse
Thanks. I posted a couple of queries in the thread for this ROM but have never got any replies. I'll try again.
I checked the registry and the setting referred to in the link is already there :0(
itm said:
Thanks. I posted a couple of queries in the thread for this ROM but have never got any replies. I'll try again.
I checked the registry and the setting referred to in the link is already there :0(
Click to expand...
Click to collapse
That's strange. I use Jackos S2 as well, and my zoombar works without applying any tweaks. So this is not ROM-related... At least not the version SkrobPRO 1.2.1 'cause this one I use.
Nevertheless try to apply the fix proposed by @Redpoint. I have this reg setting present in my system, and it seems to be there from the very flash.
Sorry, but the Jackos' thread grows so fast that I didn't notice your posts...
Regards
Skrobel said:
That's strange. I use Jackos S2 as well, and my zoombar works without applying any tweaks. So this is not ROM-related... At least not the version SkrobPRO 1.2.1 'cause this one I use.
Nevertheless try to apply the fix proposed by @Redpoint. I have this reg setting present in my system, and it seems to be there from the very flash.
Click to expand...
Click to collapse
Do you mean this one?
[HKLM\Software\HTC\SmartTouch\Opera Browser]
"FullPath"="\Windows\Opera9.exe"
If so, I already checked and it was already set this way :0(
I'm sorry then. The only clue I can give you is that my zoombar works with Opera. So I'm afraid you have to check your apps/mods.
have you checked that Oper9.exe in the windows folder had a capital O? that used to be the problem and a quick fix.
The Jack of Clubs said:
have you checked that Oper9.exe in the windows folder had a capital O? that used to be the problem and a quick fix.
Click to expand...
Click to collapse
Now that's strange - the zoom bar is now working again, and I hadn't taken any measures to correct it. It could have been a soft reset which revived it?
Thanks for the tips in any case.
Now this is bizzarre...after another soft reset the zoom bar is now SCROLLING instead of zooming - i.e. skipping up and down the elements in a web page. WTF????
Are you sure you never installed anything like zoomads or ZoomBarPlus?
Skrobel said:
Are you sure you never installed anything like zoomads or ZoomBarPlus?
Click to expand...
Click to collapse
Pretty sure. I'm absolutely sure that I didn't install it in the last hour (i.e. since the zoom bar briefly started zooming correctly in Opera).
Is there another reg setting that controls the use of the zoom bar? Ideally I'd like it to zoom in Opera, but scroll in Outlook for example.
I've also noticed that the zoom bar works fine in Excel (i.e. it zooms, rather than scrolls). I just can't get it to zoom in Opera again. Does this give any clues??
Another observation...if I manually run OperaL.exe (as opposed to Opera9.exe) from the Windows folder the zoom bar does work, albeit not very smoothly. I have no idea what OperaL.exe is however
???
nothing should scroll if you dont have a custom rom or installed a program like zoombarplus or whatever. changes to the zoom bar settings will only happen with a restart/soft reset.
Opera Mobile official thread
have a look on my signature to find all related to Opera
I've had the zoom bar scroll in Opera 9.7 on the Energy ROM, but only very very rarely. As in once or twice in a month, and exiting Opera and restarting it fixed it. Never installed any type of scrolling CAB or mod for the zoombar.
Did you try a hard reset? And did you run Task29 before flashing the ROM?
redpoint73 said:
I've had the zoom bar scroll in Opera 9.7 on the Energy ROM, but only very very rarely. As in once or twice in a month, and exiting
Did you try a hard reset? And did you run Task29 before flashing the ROM?
Click to expand...
Click to collapse
I haven't tried a hard reset, and didn't run Task29 before flashing (I only just Googled Task29 to find out what it was!).
Is it normal for both Opera9.exe and OperaL.exe to exist in the Windows folder (e.g. are they different versions of Opera?), or does this suggest that I should have run Task29 before flashing?
OK I finally managed to work around the problem by (re)installing Opera 9.7 from a CAB. Now the zoom bar is zooming again!
This is driving me nuts....now zoom bar in the newly-installed Opera 9.7 has started scrolling instead of zooming. The behaviour appears to be random. Has anyone else had this problem???
Hi hi.
I'm having the exact same problem, now running Jackos S3 SleekBasic 1.0.1. I'm out of solutions. Did you manage to solve the problem?