Can anyone if the rilphone.dlls on this page http://forum.xda-developers.com/showthread.php?t=494632 will work on the diamond? Does it have any side effects when installed on the diamond?
Thanks
ko0l said:
Can anyone if the rilphone.dlls on this page http://forum.xda-developers.com/showthread.php?t=494632 will work on the diamond? Does it have any side effects when installed on the diamond?
Thanks
Click to expand...
Click to collapse
This question should be directed in the Radio Thread.
I personally haven't tried but I know folks are testing it.....Out
I'm searching for the Rilphone.dll for the diamond's radio 1.13 (not SU)
I found the 1.13 BlackStone version, but I don't know if it is valid or not.
Related
Hi,
i was reading through the posts in this forum and over at 4winmobile.com regarding the porting of Touchflo and all the apps unique to Wizard.
What I still don't get is this:
Is there a "working" CAB already out now? So that I would just need to install that CAB to have Touchflo?
If there is, which would be the best ROM to go with it.
Are there any complete Roms, that have Touchflo already enabled?
How stable is the whole thing anyway?
Maybe somebody who is really into this can give us all an update/ walkthrough on this topic, since information on it is widely scattered over several posts at the moment.
Thanks for your efforts,
trial
roundup... touchFLO is currently only buttonFLO on the hermes.
and at SchapsROM it is only Buttonflo with Blackscreen...
so, there is no proper ROM avaible, that has at least touchButton installed by default?
What about the other questions I asked?
anybody?
thx
Is there a "working" CAB already out now?
Click to expand...
Click to collapse
"ButtonFLO" is known to work well with blackmajik and most latest roms.
So that I would just need to install that CAB to have Touchflo?
Click to expand...
Click to collapse
There is no need to install a cab to assign the button. Just set any button to run the app.
Are there any complete Roms, that have Touchflo already enabled?
Click to expand...
Click to collapse
Yes, there is some rom flying around. black majik + "ButtonFLO" but you have to assign the button. The steps to make it function are in there. Just follow.
How stable is the whole thing anyway?
Click to expand...
Click to collapse
TouchFLO was not meant/made for hermes but for HTC Touch therefore it doesnt run perfectly but some people at 4winmobile.com are still working on making it better.
trialbin said:
so, there is no proper ROM avaible, that has at least touchButton installed by default?
What about the other questions I asked?
anybody?
thx
Click to expand...
Click to collapse
There's a Black Majik ROM that was re-cooked with the added files in Windows over at 4winmobile. I think Slueth? cooked it but not 100% sure. I'm actually using it right now, but I didn't add the ButtonFlo CAB cause the first time I used it, it worked for a little, but as you add apps it acts weird, so, I'm using just the ROM and it's absolutely awesome! Super stable, etc!
guys, thanks for all your replies!
will continue my search with your infos now, and add to this post, as i have more info myself.
regards,
trial
It might sound stupid and even thhough I have been using xda forums for over a year there is no talking about the HTC Love or P3350!!!! Is it compatbile with our Atremis roms or not? Will it be able to use tha supercid solution from the Atremis or not? Thank you in advance for your time and effort in helping me find a solution!!!!!
pwillis94 said:
It might sound stupid and even thhough I have been using xda forums for over a year there is no talking about the HTC Love or P3350!!!! Is it compatbile with our Atremis roms or not? Will it be able to use tha supercid solution from the Atremis or not? Thank you in advance for your time and effort in helping me find a solution!!!!!
Click to expand...
Click to collapse
Yes it function all right. Only things I have noticed is the absence of RDS (text radio) on FM Radio in Artemis ROM. May you upload your radio? Mine is gone flashing windows mobile 6. One another little problem is the malfunction of gps intermediate driver (but this isn't a really problem)..
May you upload your radio?
Click to expand...
Click to collapse
Which file is necessary to you?
I have Radio 02.67.90 (in attach my Radio); OS (Russian) 1.36.0.0; ExtROM 1.36.441.104
Сan I use Artemis Touch Vanilla 3.01 on 3350?
SDHC works?
peritonit said:
Which file is necessary to you?
I have Radio 02.67.90 (in attach my Radio); OS (Russian) 1.36.0.0; ExtROM 1.36.441.104
Click to expand...
Click to collapse
Thank you but I needed FM Radio (it is a program under \windows path)
peritonit said:
Сan I use Artemis Touch Vanilla 3.01 on 3350?
SDHC works?
Click to expand...
Click to collapse
Yes, you can use all ROMs builded for HTC P3300 and SDHC function.
pwillis94 said:
I have been using xda forums for over a year there is no talking about the HTC Love or P3350!!!!
Click to expand...
Click to collapse
Oh really... So look at this topic:
http://forum.xda-developers.com/showthread.php?t=332398
http://forum.xda-developers.com/showthread.php?t=334813
http://forum.xda-developers.com/showthread.php?t=342675
It might be others, use search button
WM 6.1 ROM for P3350
I managed to install da "Artemis Touch 4.02 Full with 4 sided cube" ROM with ease to my P3350, you'll find all da info you need on how to Flash da rom, just follow da link, have Fun...... Cheers...
http://forum.xda-developers.com/showthread.php?t=385924
1.17.25.09
since main radio thread title not being updated anymore i am letting you know
http://forum.xda-developers.com/showthread.php?t=470306&page=109
Got it from the HTC page thx.
Any props on the availibility of the rilphone?
The update from HTC's site didn't sport any.
last radio for diamond
hjlow said:
1.17.25.09
since main radio thread title not being updated anymore i am letting you know
http://forum.xda-developers.com/showthread.php?t=470306&page=109
Click to expand...
Click to collapse
need su
modified for diamond
link http://www.megaupload.com/?d=HRN3Q0AM
darckreign1984 said:
need su
modified for diamond
link http://www.megaupload.com/?d=HRN3Q0AM
Click to expand...
Click to collapse
flashed it this morning
dont see any diference from my 1.13 ... but hey i left it on
this may seem like a noob question (witch in terms of diamond i am):
whats with the rilphone? what does it do?
i have 2 years exp on flashing and moding my eten m700 device, but it seems like on diamond there a lot more things to consider: spl/ radio/ rom ... now this rilphone ...
can you give me some quick explanation?
thank you all
darckreign1984 said:
need su
modified for diamond
link http://www.megaupload.com/?d=HRN3Q0AM
Click to expand...
Click to collapse
i already ported it, but the more the merrier
there might be rilphone.dll in bs or rapheal forum
hjlow said:
i already ported it, but the more the merrier
there might be rilphone.dll in bs or rapheal forum
Click to expand...
Click to collapse
if you verify with NBHUtil ... original radio its signed for BS
darckreign1984 said:
if you verify with NBHUtil ... original radio its signed for BS
Click to expand...
Click to collapse
This is normal, since it COMES from the BS.
Then again, the Raphael Radio thread is most active than any other.
GPS is quite good.
~ 2 min. fix from a cold boot. A few seconds (usually < 10) from a warm boot.
Battery usage is worse than with the 1.16 diam radio.
IMO, the best are still the 1.14 series.
Does the radio need Security Unlock?
sapphire_pro said:
Does the radio need Security Unlock?
Click to expand...
Click to collapse
If u would read the thread, u would know the answer...
Small hint: su
Hello,
I searched a lot of threads but I did not find an appropriate answer for the question: What is the function of rilphone.dll?
Please can someone clearly explain for what the file is?
Thank you in advance!
Regards,
sapphire_pro
sapphire_pro said:
Hello,
I searched a lot of threads but I did not find an appropriate answer for the question: What is the function of rilphone.dll?
Please can someone clearly explain for what the file is?
Thank you in advance!
Regards,
sapphire_pro
Click to expand...
Click to collapse
I am not an expert on this subject, but AFAIK the rilphone is a sort of bridge between the radio and the OS.
If a radio has some advanced functions the rilphone has the task to make them understood by the OS.
So it is important to have radio and rilphone aligned
Not a very scientific explanation but should give you an idea.
If someone wants to add more explanations, I will not be hurt
And where can I get the different rilphone versions? (esp. for Radio 1.13.25.24)
sapphire_pro said:
And where can I get the different rilphone versions? (esp. for Radio 1.13.25.24)
Click to expand...
Click to collapse
here you go
anyone got diamond rilphone for 1.09.25.23 please?
so like just run the cab? that's all? now i'm running a rom with a 1.13 rilphone and my radio is 1.00.25 (yeah, yeah... there's a big story behind this )
all works fine, but i just found the rilphone 1.00.25 *cab* - question... do i simply install the cab and seemingly my rilphone gets downgraded?? and know of any impacts on the ROM?
reason i'm asking before doing is - it takes me about 2 - 3 days to customize the rom, and i just did it so don't want it to go wasted
thanks.
EDIT: found some links
http://forum.xda-developers.com/showthread.php?t=481026
http://forum.xda-developers.com/showpost.php?p=3407403&postcount=808
Hi all,
i was reading threads on changing roms on htc touch pro2 and i have a question that isn't answered (or i couldn't find it).
i currently have swedish language only, and i would like to change to english but i am not sure which rom can i install?
can i install any one from this link:
Code:
http://forum.xda-developers.com/showthread.php?t=893696
here is the info on the device i have:
MODEL:HTC Touch Pro2 T7373
ROM-version: 1.86.413.0(67102) SVE
ROM-date: 25.09.2009
radioversion: 4.49.25.17
protokolversion: 61.44tc.25.32U
Denao200 said:
Hi all,
i was reading threads on changing roms on htc touch pro2 and i have a question that isn't answered (or i couldn't find it).
i currently have swedish language only, and i would like to change to english but i am not sure which rom can i install?
can i install any one from this link:
Code:
http://forum.xda-developers.com/showthread.php?t=893696
here is the info on the device i have:
MODEL:HTC Touch Pro2 T7373
ROM-version: 1.86.413.0(67102) SVE
ROM-date: 25.09.2009
radioversion: 4.49.25.17
protokolversion: 61.44tc.25.32U
Click to expand...
Click to collapse
You need Hard SPL first. Then you can flash any ROM in the world that is made for the GSM Rhodium.
thank you for your answer.
i successfully flashed my touch pro2 and it's working great - apart from the minor keyboard issues.
i know i need to hard SPL first, although i don't know exactly why. all i wanted to know what are the chances that i screw up my phone by installing wrong rom.
anyway, this is a great forum and i am happy to be here.
thanks to all who develop roms/radio/etc... and make tutorials
Denao200 said:
thank you for your answer.
i successfully flashed my touch pro2 and it's working great - apart from the minor keyboard issues.
i know i need to hard SPL first, although i don't know exactly why. all i wanted to know what are the chances that i screw up my phone by installing wrong rom.
anyway, this is a great forum and i am happy to be here.
thanks to all who develop roms/radio/etc... and make tutorials
Click to expand...
Click to collapse
You are on the right track. The only thing you need to keep in mind is that you can only install GSM ROMs on your device. If you try to install a CDMA ROM, you run the risk of bricking it. Just don't wander into the CDMA forum, and you'll be just fine.
hi,
yes i realize that there is a difference between GSM and CDMA devices. i saw all the warnings in the rom flash tutorials
by the way, i have one more question about adobe flash.
i know that microsoft no longer supports wm6.5 and neither does adobe...
on adobe's official page the latest flash is 7.0.
is there anyone at all that is trying to develop flash 10 for wm6.5?
i think that would be awesome, so any links on this topic are more than welcome.
i would be happy to try to help develop flash 10 although my programing skills are pretty basic...
p.s. the forum looks nice on touch pro2, but it could be a bit wider.
Denao200 said:
hi,
yes i realize that there is a difference between GSM and CDMA devices. i saw all the warnings in the rom flash tutorials
by the way, i have one more question about adobe flash.
i know that microsoft no longer supports wm6.5 and neither does adobe...
on adobe's official page the latest flash is 7.0.
is there anyone at all that is trying to develop flash 10 for wm6.5?
i think that would be awesome, so any links on this topic are more than welcome.
i would be happy to try to help develop flash 10 although my programing skills are pretty basic...
p.s. the forum looks nice on touch pro2, but it could be a bit wider.
Click to expand...
Click to collapse
Sorry to disappoint, but you kind of answered your own question there. MS and Adobe both dropped support for flash on WM. The only way to get flash 10 on your Rhodium is to use Android.