No wifi solution.[Resolved] - HTC Excalibur

Resovled. BIGG BIGG thanks come to jockyw2001.He's the one spended many hours to sovled this problem.Also everyone who helped him kick out the trouble.Man,after 2 year his solution still helpful.And there is a manual,but its in the thread so not many one can find out,after they bricked their wifi,no more patient?
Who want there wifi back on should see this thread Page by pages.The manual is in there.
http://forum.xda-developers.com/showthread.php?t=328690
And who still not understand should go here
http://forum.xda-developers.com/showthread.php?t=484166
Now i has my wifi back.But still a problem,battery running out quickly,so must i continue to search

Well, what is the issue... you upgraded and can't fix Wi-Fi?
http://forum.xda-developers.com/showthread.php?t=484166&highlight=wifi+fix

To be honest,that thread is no help at all.

Well, depends. What is your problem... you are having difficulties with Wi-Fi? Or you just want a manual... Its not very clear.

uh oh,i didnt say it clearly,it's no wifi after do jaunkinder trick to unlock vendor id

Can anyone explain to me what is a "block of byte"(in hexeiditor)?One more step to get woke up my wifi but i suck here.
When it say "select a block of 0x300 bytes at offset 0x83C00 and clear this area" what does it mean??

Related

Lost Data connection

Hello everyone. I'll make this quick and easy question. I have successfully updated to 3.35 radio, and tried several different custom roms in the past 2 weeks... At some point, i lost my internet connection, went back to stock rom successfully, and tried entire process over with and without the new radio (depending on which rom i tried according to instructions) and still no internet. I have spent literally over 4 hours on the phone with bell (Canada) to no avail. Only other option is to beat it with a hammer. I have noticed a couple people have had the same problem.. i have read these and PPC forums for hours and hours and hours, to try and fix this and get my Data connection back. tried almost every Rom i could find... to no avail. I'm just wondering if anybody had a sound fix for getting the Data connection back working again before i go to the store i got it from and freaking out and trying to get a new phone, or sending it off for a warranty claim which they say could take 6-8 weeks. Thanks for your time.
Chow.
This happened alot when
we were changing radiios
and roms on the Titans.
Most of the time the techs had to reset the
data security on their end. If they cant figure it
out , flash back to stock
radio and rom and go to
the store and swap it
out. Tell them you did
a hard reset and lost your data connection.
Good luck.
if you have another pda phone, get your carrier to activate it on your account, set it up ... get data working ... then get your carrier to switch it back to the one that had lost it's data connection, set it up ... try the data connection ... works every time on vzw ... I do the esn changes online ... give it a try ... couldn't hurt
Fuzzy
just spent another hour on the phone with tech Support, he tried resetting the Data Security, completely removing my device from our account and putting it back on, and he also had one of his own Touch's with him, he added it to my account, and it worked fine.. still nothing on mine. Grrrrrrrr!! this is megga frustrating... its been a week 1/2 and now 5+ hour on the phone and an hour at the repair shop yesterday. he re-esclated the problem and now i have to wait again for somebody to call me. I really don't want to have it sent to HTC becuse it will take 6-8 weeks, and i truely think its something in my phone itself as a result of "playing" with it, and i'm just hoping that somebody can come up with something that I havent already tried to get it working again. Thanks for you time once again, and keeping my fingers crossed.
Go to the epst settings.
Find username and password in there ( i guess data parameters??). It will be wrong. [email protected]
change it to the right ones.
that is EXACTLY where i went a week or so ago. i found this information in another post, and the UN is there, but no password, and Bell insists there is no need for username and password... but i disagree... i also think this is the problem.. i really do... any ideas how the heck i can get what my password should be?
in teh Data parameters, the only thing that is in there is Packet Dial String ----#777 In the security section is the UN and Pass. field. Is this where you were talking about maybe?? or is there something missing in the Data Parameters section?? UN showing is [email protected]
GRRRRRR!! This really sucks.!! BIGTIME!. Ive been fooling with this thing since 6Am... lol One thing that i did forget to mention, is... when i say no data, or internet.. this is what happens..
When i try any app. that wants internet, it will bring up the connection screen, "Connecting to Data, network... #777" type thing..... sometimes it will just sit there forever and ever... if i hit cancel... then in order for me to even make a phone call, i have to soft reset.... sometimes... (about 50% of teh time) it will come up with an error screen after about 5 seconds of trying to connect, and it says "Unable to connect for an unknown reason, if you need to view or change settings, tap settings, if teh problem continues reset your device according to manufactures instructions, and try again."
I just downloaded and tried the new Sprint Leaked rom, with the 3.37 radio, and still same thing. i still think it has something to do with the Username and PW in the ##778 settings... because i do remember seing a bunch of (hex) information in the PW field in the past when i was snooping around and now its gone.... I even tried converting the two numbers that bell gave me to Hex and putting them in there... and nothing... the one that i seen in there before was a big ass long one... Anyhow... i'm almost giving up i'm soon going to get extremely angry and beat it or throw it off the 20 floow balcony just for kicks... <g> Thanks for reading.Any help is appreciated.
Grashoper said:
GRRRRRR!! This really sucks.!! BIGTIME!. Ive been fooling with this thing since 6Am... lol One thing that i did forget to mention, is... when i say no data, or internet.. this is what happens..
When i try any app. that wants internet, it will bring up the connection screen, "Connecting to Data, network... #777" type thing..... sometimes it will just sit there forever and ever... if i hit cancel... then in order for me to even make a phone call, i have to soft reset.... sometimes... (about 50% of teh time) it will come up with an error screen after about 5 seconds of trying to connect, and it says "Unable to connect for an unknown reason, if you need to view or change settings, tap settings, if teh problem continues reset your device according to manufactures instructions, and try again."
I just downloaded and tried the new Sprint Leaked rom, with the 3.37 radio, and still same thing. i still think it has something to do with the Username and PW in the ##778 settings... because i do remember seing a bunch of (hex) information in the PW field in the past when i was snooping around and now its gone.... I even tried converting the two numbers that bell gave me to Hex and putting them in there... and nothing... the one that i seen in there before was a big ass long one... Anyhow... i'm almost giving up i'm soon going to get extremely angry and beat it or throw it off the 20 floow balcony just for kicks... <g> Thanks for reading.Any help is appreciated.
Click to expand...
Click to collapse
i am not with bell, so dont know what do they use. Maybe somebody else can confirm if they are supposed to be empty or not.
may be try empty username and password.
Then try the username you have right now and esn as your password.
i know on telus both will work.
YES YES YES YES!!!! ohhhh yeah babby!!..
i FINALLY got it working!! Yeeee hawww... if only you knew how happy this makes me... deer gawd...
I'll post what i did in the AM.. i can hardly keep my eyes open...
Thanks for all your input!
wanna share? i haven't had internet for the last three weeks and i am going nuts, tried with bell tech support for roughly 3 hours on the phone two seperate times and nothing. Please share
before i tie the phone to the back of my bike and ride around town to set an example heheh
Nas
Hay.... I wan't able to access the website here for a couple days... EVERYTHING you will need to get your internet back (Hopefully) is over on PPCgeeks... i recomend reading the whole thread, although the final answer to your question is near the end of the thread. Check it out...
http://forum.ppcgeeks.com/showthread.php?t=26691

IE Issues after WM6.1 upgrade

Hi, I upgraded to WM6.1 over the weekend, everything looks pretty cool.. But IE can not get on the internet anymore.
I'm able to check the email okay but IE reports the following error
HTTP ERROR $CODE$
I see the Edge (E) come up when I launch the IE so that means IE is trying to open the connection but does not bring anything back.
Someone please help
That is the same error I get.
I scanned pretty much all related thread did not find anything yet...
Pig Vomit said:
That is the same error I get.
Click to expand...
Click to collapse
Hi, Newbs. When you flashed your phone did you use the "Sticky: The Guide for UPGRADING WM 6 to 6.1 with PICS and LINKS" I'm pretty sure you both skipped a step naughty naughty....
Well if you go to the Sticky and look at post #3 and run your connection setup like you were suppose too, we wouldn't be having this conversation . It honestly should be that simple.
Good Luck
Manual Settings: http://tmobileuspublic.wdsglobal.co...=phone.vm&selectManufacturerId=9&phoneId=1828
hahah
naughty naughty
thats way better than my approach...
Never a Thank You nor friendly follow up reply either...you ever notice that Gixxum.
pfunkside said:
Never a Thank You nor friendly follow up reply either...you ever notice that Gixxum.
Click to expand...
Click to collapse
i dont expect one....most the time i deserve a follow up kick in the nuts =)
but you were polite, so yes, you got screwed.
ps. THANK YOU FOR FIXING MY INTERTUBEZ.
Internet Explorer not working?
I've been able to figure out every other problem with my IE, but now this one has stumped me, and i need help.
i'm using Wifi, and for some reason i cant go to any websites. even a site such as google wont work.
I get an error that says "The page cannot be found. Check the name and try again."
and i know for a fact that im not typing in "http://www.google.com" wrong. its not a hard one.
its not my connection. im sitting right next to my wireless modem and router and my computer is working fine. in the Comm Manager i have full Wifi service.
There was at one point when i a site to work, but then IE went back to the IE homepage on its own and wouldnt work again.
SOOO pleaseee, if anybody can help, please do
Thanks guys =]
Hi guys.. just checked my thread again now after coming back home. many thanks for replying..
BTW I did run the connection setup multiple times after deleting the settings and all other possible options... but nothing worked.
I just tried setting up proxy mannually but NO GO.....
Looks like I'll have to run the kavana upgrade again..
Many Many Thanks for taking time to reply... I always try to follow up and appreciate people who respond.. thats the least one can do
gixxum said:
i dont expect one....most the time i deserve a follow up kick in the nuts =)
but you were polite, so yes, you got screwed.
ps. THANK YOU FOR FIXING MY INTERTUBEZ.
Click to expand...
Click to collapse
Not sure if this will help but...
I have found that if I switch networks from my "E" data plan to my home WIFI, or vice-versa, I have to quite IE (press the pink tmobile button and select "close" for IE) then restart it and viola it works. I seem to have to do this anytime I was using IE on one network and then connect to another without my phone being turned off at anytime in between.
Hope that helps.
WM6.1 Internet setting !!!!! HELp!!!
I recently flased the wm6.1 v24 on my phone and now i dont have internet. I have tried using the 5.99 plan with proxy and no luck. Right now i have the 19.99 feature but still dont get any internet. Anyone have the setting to make it work with tmobile? (19.99 plan)
ALl i get is I dont have accessed to this site, or http error.
dabezt1 said:
I recently flased the wm6.1 v24 on my phone and now i dont have internet. I have tried using the 5.99 plan with proxy and no luck. Right now i have the 19.99 feature but still dont get any internet. Anyone have the setting to make it work with tmobile? (19.99 plan)
ALl i get is I dont have accessed to this site, or http error.
Click to expand...
Click to collapse
If you are running Ricky's v24:
Start > Accessories > Connection Setup
Run the Connection setup, select United States and T-Mobile. I think that you'll need a reboot after the settings update.
I 2nd That
That's exactamundo correcto. Trust this man. He is dead on.
ruinertt said:
If you are running Ricky's v24:
Start > Accessories > Connection Setup
Run the Connection setup, select United States and T-Mobile. I think that you'll need a reboot after the settings update.
Click to expand...
Click to collapse
having the same problem and after running the connection set up again still getting the "http error $code$ $message$ requestURI=/"
I'm on the 5.99 t-zones. the really weird thing is right after the flash it was working then tried it about 30 min later and nothing. I've tried about 4 different variations of manual settings I can find. Any help?
I'm having the same problem with internet after upgrading to 6.1. Yes I have ran the connection setup and let it reboot, tried it twice with no luck. Txt messages still work, just doesn't seem to access any internet sites. I'm using the 19.99 plan and running Kavana's 6.1 080408 final. I have also tried using the manual settings provided by Tmobile
Any ideas?
does your MMS work?
if not call t-mobile to reenter you into their network. 5 minute call.
do the connection setup then do the tzones hack it worked fine for me and this is the second dash after my first one went out. Not one problem installing anything use search I dont post must as u see but I have done plenty of mods on thru this site without asking questions all the answers are out there just search and read.

T-Mobile Dash and Wifi certificate error

Hello All,
First off I'm very sorry if this has been posted before. I have searched for hours and can't seem to find a solution.
I just recently got a Dash. Wifi works great on it at my home through WEP. However, at my university's campus I am unable to connect. My school uses 802.1x PEAP routers, where everyone trying to connect has to input their username, password and domain. I entered in all the information in my Dash but I get a certificate error. A friend of mine who has a HTC Diamond has a program on his phone that will disable that error from happening and he is able to connect to the campus Wifi. Is there a solution to this problem or a program that will allow me to override this message?
Thanks for your time.
i searched around and read many many threads like this...not one has a solution. seems is a windows f**k up yet again.
http://www.jacco2.dds.nl/networking/crtimprt.html
check that out
also, google Funk Software Odyssey and read about that
Thanks a lot for your help. I guess I'll keep looking for a solution. There's got to be a fix out there.
gixxum said:
i searched around and read many many threads like this...not one has a solution. seems is a windows f**k up yet again.
http://www.jacco2.dds.nl/networking/crtimprt.html
check that out
also, google Funk Software Odyssey and read about that
Click to expand...
Click to collapse
Too bad they are all made for PocketPC.
indeed but i have read some people getting them to work on wm standard...just like many other ppc apps.
ummm i dont no but u sound like u go to utech, ne how, i have dat problem sometimes, but on other ocassions it connects fine, i tink its jus one of those tempermental ting or the network's interfacing wit ur device

Speech-to-text problem in new OTA 4.24??

Has anyone noticed that in the new OTA 4.24 that the speech-to-text function has become worthless/unusable? Worked fine in Froyo, but now speech-to-text is borked in GB????!!?!?! Has anyone found a fix?
Let me clarify. I'm using essentially the stock OTA rooted and deodexed. Perhaps the trouble came with the deodexing, I am unsure. Anyone running a 4.24 based deodexed ROM having trouble? You hit the mic icon, speak, and it basically acts like it didn't pick up any sound.
Ive been on the OTA since it came out and I have had no problems with this function. I use it frequently to send text messages should I happen to be driving. With the exception of the occasional misunderstood word, i never have problems. I use it to search the web, to navigate, all without consequence.
Perhaps rather than bashing the entirety of this function and assuming there is a fix for something that may only be your problem or your configuration, you could provide us with some examples of what youre trying to accomplish/say and what the end result is?
usafmaverick said:
Ive been on the OTA since it came out and I have had no problems with this function. I use it frequently to send text messages should I happen to be driving. With the exception of the occasional misunderstood word, i never have problems. I use it to search the web, to navigate, all without consequence.
Perhaps rather than bashing the entirety of this function and assuming there is a fix for something that may only be your problem or your configuration, you could provide us with some examples of what youre trying to accomplish/say and what the end result is?
Click to expand...
Click to collapse
Ha...this is hilarius...a Junior member with 14 posts is trying to school a Recognized Develepor. I am pretty sure he doesn't have a config issue. I have had the same issue myself but only while driving, really wierd.
Steely man how are ya!
I have also not had any speech to text issues and I am completely unrooted s on and all. No wayback home yet...
does it always not work or only in some applications.
"This works written by voice to text"
Hehe
Sent from my PC36100 using Tapatalk
tommytomatoe said:
Steely man how are ya!
I have also not had any speech to text issues and I am completely unrooted s on and all. No wayback home yet...
does it always not work or only in some applications.
Click to expand...
Click to collapse
It doesn't work for **** in any application. You hit the microphone and the pop-up windows comes up as normal and says speak now, but unless you literally yell at the phone it doesn't pick up anything.
I had an issue with no speech to text on the previous version of Fresh, finally updated to the 4.2 today and the problem went away.
Dunno.
the 14 post guy does have a valid point. The amount of posts you have on this forum mean NOTHING on how smart you are. lol. sorry guys. but it is true. for example, just because someone has worked for IBM for 20 years doesn't make him knowledgeable on any part of IBM. Just means someone was stupid enough to pay him for 20 years. lol
But need exact examples of exactly what's going on. Maybe when you trained your phone, it lost those settings after the update? retrain it.
REMEMBER EVERYONE, if you're saying "offensive" words on it, by default it blocks it.
If the personalized recognition is unchecked, then the settings didn't carry over from one to another. WHICH GUESS WHAT! THEY DIDN'T! HAHAHA. checking mine now, and all the settings didn't stick. also, the training for the skype didn't make it over too which has been messing up my writing on this phone.
runcool said:
the 14 post guy does have a valid point. The amount of posts you have on this forum mean NOTHING on how smart you are. lol. sorry guys. but it is true. for example, just because someone has worked for IBM for 20 years doesn't make him knowledgeable on any part of IBM. Just means someone was stupid enough to pay him for 20 years. lol
But need exact examples of exactly what's going on. Maybe when you trained your phone, it lost those settings after the update? retrain it.
REMEMBER EVERYONE, if you're saying "offensive" words on it, by default it blocks it.
If the personalized recognition is unchecked, then the settings didn't carry over from one to another. WHICH GUESS WHAT! THEY DIDN'T! HAHAHA. checking mine now, and all the settings didn't stick. also, the training for the skype didn't make it over too which has been messing up my writing on this phone.
Click to expand...
Click to collapse
Thanks, but I'm not a dumbass. Perhaps you should look at the threads I've created before providing any further commentary.
I don't see anywhere in this thread where I had a problem with 'training' 'offensive words' or any other 'settings' as you have mentioned. Please read more carefully in the future and refrain from posting unless you have an answer to the question posed.
Mine works if there is no back ground noise but if there is the slightest noise forget it it just says no voice heard my wife also has the same problem. But with here Russian accent it never gets the words right anyway. At least I know I'm not the only one.
Sent from my PC36100 using XDA App
I seem to only have problem while using it in my messenger app. That being said, I am using Swype and just chalked up my problems to using that keyboard because it works fine with the voice search app?
pennie77 said:
Mine works if there is no back ground noise but if there is the slightest noise forget it it just says no voice heard my wife also has the same problem. But with here Russian accent it never gets the words right anyway. At least I know I'm not the only one.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Exactly the problem, it acts like it doesn't pick up any speech at all.
If you have this problem and have found a solution, please PM me.
This thread is now closed to prevent noobs, trolls, and flamers from clogging it up.
If a solution is found, I will post it.

[Q] How to connect to hidden WiFi?

Hello xda community!
I have a strange and serious problem: I can't connect to hidden WiFi's.
I'm with a LG G3 D855 10H (no newer versions available).
At work we use a hidden WiFi without password but with Juniper VPN.
When I type in the network name and save it, it tries one time to connect, then my LG G3 shows "not in range". After a few seconds, the WiFi is on the top again with a very good signal.
When I try to connect again, it shows "not in range" again and so on.
I tried it at home and created a hidden network and it was reproducible.
Anyone else has problem with this?
Many thanks in advance for your help!
Best regards,
Jake
Jake2kOne said:
Hello xda community!
I have a strange and serious problem: I can't connect to hidden WiFi's.
I'm with a LG G3 D855 10H (no newer versions available).
At work we use a hidden WiFi without password but with Juniper VPN.
When I type in the network name and save it, it tries one time to connect, then my LG G3 shows "not in range". After a few seconds, the WiFi is on the top again with a very good signal.
When I try to connect again, it shows "not in range" again and so on.
I tried it at home and created a hidden network and it was reproducible.
Anyone else has problem with this?
Many thanks in advance for your help!
Best regards,
Jake
Click to expand...
Click to collapse
I've got the same problem.
My problem was resolved
rayan96 said:
I've got the same problem.
My problem was resolved
Click to expand...
Click to collapse
Now that is what you call a 'special' post!
Would you care to explain how it was resolved for the people that have the problem.
My problem still exists, but isn't urgent anymore.
I found out, Android itself have problems (or restrictions?) to hidden WiFi networks.
I also found an app names HiddenSSID Enabler, but it seems it didn't work for me (or G3?).
If someone has a solution it still would be very helpful fo rme and the rest of the community.
// Jake
I have logs posted in my first post, WIFI DESTROYED TWICE or there abouts.
I've had to resort to DATA and its killing me haha i think i am getting close to fixing it, well i think i may be closer than you two and can one of you kindly take the lead as im reinstalling windows and i haven't gamed in 6 days :|
/system/etc/wifi/WCNSS_qcomcfg.ini
then the problem is complex but i am sure it is something to do with gEnableApProt=1
Offshoot fix, reinstall using googled imei number that doesn't have a flag or some how fix the flag <READ A FEW DAYS BACK>
I think actually the program that stuffed me was Airmon by maxters. It asked me if i was pro and of course, i said yes. Who would simply click no? I know a ninj wouldn't click no. I think there is a manual reinstall to link to it again i find the modem in its own partition having a chill, most likely trojan/backdoor and pwning everything around me.. I had three encrypted vpn backdoors and escalated accounts on my computer I paid the 5$ for the binarys, i think i paid 5$ for the back doors.
Not to sell Airmon out though.. Rooting our phones and accessing countless forums and websites really does leave us rather "xposed" some other cuplrits may be dsploit, ROM manager, linux Deploy/kali, Pamn IP scanner, system app remover pro, busybox pro's (Stephen/JRummy) or CMinstall/accessing the forums and trying to install cynagenmod / twrp recovery. I'm probably going to go with..... Airmon/Linuxdeploy or uninstalltool. But may have just been my IP logged and i hit a booby trap script along the way.
You guys done anything of the sort?
/Thread killller
Neither I understand what you are talking about, nor am I (as not native english speaker) good at "sentence guessing".
I have a rooted phone - of course.
But I'm pretty sure my WiFi is not destroyed...

Categories

Resources