Related
Hello all, I beg thee if you can help me, my friend "stole" my xda orbit while I was erm drunk and changed a load of settings, inc adding a password. When I was sober he told me what it was so I could use the phone again. But last night I accidently wanted to change the 4 digit number code that you do when the phone goes inactive for like 1 minute...Instead I think I accidently activated some password...everytime I go to restart the xda I get grilled for a password and if its wrong the time counter keeps going up and up...
Basically I really either need to crack or deactivate this password or some how backup my txts and phone...as I didn't before and theres a few sentimental texts I don't want to lose...
I hope you can help me
i think you might be stuck unless you can figure out the passcode!
i dont think it lets you sync your phone at all does it?
no sync
no asks for a password before sync-ing wondered if there was an alternative to activesync that would work??
was about bootloader mode, if you can go in you would be able to flash a (new) rom.....
errr right
you've lost me, last time I did rom flashing was on a very old XDA and ive forgtten..help!?!
You just have to go to WM6 artemis part of the forum, read the topics about "how to flash" and use the last wm6 rom B&B v3.7.
Before that, ensure bootloader mode is available.
Good luck
huh
1 I don't know how to know if bootloader mode is available
2 I think im on WM5!?
If it is a UK model then he can flash it back to the original ROM using the microSD card first if it will not connect by USB cable.
Yes its an 02 XDA Orbit and I live in the uk and it is a UK phone...so I guess I can but how the hell!? lol Thankyou by the way you may have saved me!
As it seems no backup was done, what about trying to ask a repair center if they can "unlock" the password. Of course you will have to show to purchase invoice ....
Thanks, that will be my alternative if the rom flash doesnt work...just need to be told how to do it via micro sd!!!!
advent said:
Thanks, that will be my alternative if the ROM flash doesn't work...just need to be told how to do it via micro sd!!!!
Click to expand...
Click to collapse
I will PM you about the file you need as all references to it seem to have been removed from the site.
You then put the file onto an empty microSD card and put the card into the phone.
When you turn on the phone ho hold in the 'record' button (top left hand side viewed from the front of the phone) and the phone should go into boot-loader mode and recover the OS from the microSD card.
EDIT: NOT removed, just unpinned! http://forum.xda-developers.com/showthread.php?t=314866
Does it matter if anything else is on the SD card?
Do I need to update to a newer WM5 Rom after as I think i saw that 02 1 is a bit old??
advent said:
Does it matter if anything else is on the SD card?
Do I need to update to a newer WM5 Rom after as I think i saw that 02 1 is a bit old??
Click to expand...
Click to collapse
Sorry, but doesnt a hard reset solves this problem?? (if the lock is on the phone) sipmle and quick solution.
If it is the sim that is locked, contact you provider.
Considering flashing the ROM is deffinately going to wipe any saved texts etc. Surely a simpler option is a hard reset?
Press and hold both soft-keys, press the stylus into the reset hole, release reset, wait for message on screen and release soft-keys.
This will return the phone to out-of the -factory state, so again you will loose all saved data in system memory and all installed applications in system memory.
advent said:
Yes its an 02 XDA Orbit and I live in the uk and it is a UK phone...so I guess I can but how the hell!? lol Thankyou by the way you may have saved me!
Click to expand...
Click to collapse
Not quite. Flashing the ROM will erase your "sentimental" messages.
morfis said:
Not quite. Flashing the ROM will erase your "sentimental" messages.
Click to expand...
Click to collapse
Yes, but it is looking like he is going to lose them no matter what happens.
Just Hard Reset it....Wont ask for the password...you will loose your data on the device though....and if your data is on the PC can sync again...no issue there...but the service centers will not remove the password...I had the same issue...and thats what i did.
cheers
yeah all you have to do is hard reset the pda and then the password will be erased, along with all your data ofc.
It would be interesting though to find a way to "crack" the password or somehow remove or bypass it.....
like some kind of PUK code?
Hey guys. I really , really , really, (can't emphasize that enough), need your help. I flashed my Vogue about a week ago with the 19588 ROM using PPC Geeks Kitchen.
I ended up having to do a warranty exchange because my volume button came a little loose. Well, I went to Flash back to the Stock Alltel ROM, the one that is on the HTC site, thats linked on this page, the one I always use, and now I'm screwed.
It makes it to 43 percent and says theres a communication error. The really weird thing is, I can flash any other ROM to the phone, just not the Alltel ROM. Below , I've listed what I've tried, so you get an Idea. I'm beggin you to help me out here.
*I started out with CokeMan 2.31 , and the 19588 Cooked PPCGeeks Kitchen ROM.
*After the first 5 failed attempt to flash the Alltel ROM, I flashed CokeMan v0.41, and then flashed Mustangs Clean ROM w/o GPS. (this is when I figured out other ROM's will work)
*I re-downloaded the Alltel ROM from HTC's website 6 times, and have tried it on three separate computers and no luck.
*I tried almost ten different ROM's , and each time tried flashing the Alltel ROM afterwords.
*I extracted the Alltel ROM to a folder. Downloaded a blank RUU folder. Copied all of the files from the alltel folder to the RUU folder. (All of the files that were in the Alltel Folder, and not in the RUU folder.) It actually flashed all the way thru, but is now stuck at the HTC screen, and says NO RADIO at the bottom. I just stopped trying, and now am turning to the PPC Gods, you guys. SO PLEASE HELP ME OUT. I have to sent the thing back by monday, or they charge me.
I've always been able to flash to the Alltel ROM from and ROM i've ever used, and never had this trouble before in my PPC life. It always just relocks the phone.
PLEASE PLEASE PLEASE HELP!!!
flash using the sd card
Sounds like you've flashed the f*** out of that phone, suprised it didn't overheat ! Anyways, try the SD method. Also, what radios have you been adding on, or originated with on the ROM you had when you first started.
Also, I'll be quite honest, if I had to return the phone for any reason and couldn't flash back, I'd probably break it to pieces and say it was run over!
how to use SD anyone? please? ive never tried
does it really matter what ROM is on there ...if your having a button problem? You obviously didn't cause the issue because of the ROM.
faroreefer said:
does it really matter what ROM is on there ...if your having a button problem? You obviously didn't cause the issue because of the ROM.
Click to expand...
Click to collapse
Whoa! Never seen this before! If you change the ROM you completely void your warranty.
TweakMan said:
how to use SD anyone? please? ive never tried
Click to expand...
Click to collapse
1. Format your MicroSD card to FAT32 (YES - FAT 32 32 32!! not just plain old FAT) (again, this is not required if your card is already fat32; it is ok to have other data on the card). I have read that the card needs to be 2gb or smaller, though I'm not sure how much truth, if any, there is to that...
2. Extract the .NBH you desire to flash from the exe or zip or w/e put it on the microsd card rename it from RUU_signed.nbh to VOGUIMG.NBH
3.Put the MicroSD card in your phone and Get To the BOOTLOADER screen (camer+power+reset) it should then start updating with the .NBH on the SD card and the procedure should begin automatically.
quoted from here: http://forum.ppcgeeks.com/showthread.php?t=17473
and also, like the champ said, what radios have you flashed?
EDIT: and, which alltel rom are you trying to flash? if you were reverting back to a non-gps/lower radio rom, you did make sure to downgrade the spl properly using these instructions here correct?
* http://forum.ppcgeeks.com/showthread.php?t=24906
or here:
* http://forum.ppcgeeks.com/showthread.php?t=24979
good luck man!!
If you can't flash it, make sure to make it so it can't even start up... you need to completely brick it so it can't get to the bootloader, just not even turn on. Then you can blame HTC and get a new one
derekwilkinson said:
If you can't flash it, make sure to make it so it can't even start up... you need to completely brick it so it can't get to the bootloader, just not even turn on. Then you can blame HTC and get a new one
Click to expand...
Click to collapse
You can't be serious with this, right? The idea here is to fix it, not blame HTC, because I'm sure that would go over real smooth with the carrier.
TheChampJT said:
You can't be serious with this, right? The idea here is to fix it, not blame HTC, because I'm sure that would go over real smooth with the carrier.
Click to expand...
Click to collapse
lol agreed
What's the update?
If it's bricked and you have insurance, wrap your Touch in a damp cloth, put it in the microwave on high for 2 seconds, and voila!
piscesjoey said:
If it's bricked and you have insurance, wrap your Touch in a damp cloth, put it in the microwave on high for 2 seconds, and voila!
Click to expand...
Click to collapse
OH! Another one! After the voila, you call your carrier and say what exactly?
TheChampJT said:
OH! Another one! After the voila, you call your carrier and say what exactly?
Click to expand...
Click to collapse
You say it doesn't work anymore. From VZW, you get one in 1-2 days and you are done. Been there. Done that.
etexter said:
You say it doesn't work anymore. From VZW, you get one in 1-2 days and you are done. Been there. Done that.
Click to expand...
Click to collapse
Well that sounds like a horrible idea! Lol I mean if it has to be done then yeah just go to a GPS ROM and then flash back and it will brick and you can send it in if you have TEP from Sprint or something.. But first I think he wants to FIX the phone not destroy it and start over
My touch is also bricked. It boots to the Sprint logo and stops there.
What do you mean a button problem.
My Touch's green and red buttons stopped working before updating. But the phone still worked. After updating the ROM, even the phone stop working.
Could you please elaborate on this?
faroreefer said:
does it really matter what ROM is on there ...if your having a button problem? You obviously didn't cause the issue because of the ROM.
Click to expand...
Click to collapse
dongdongdog said:
What do you mean a button problem.
My Touch's green and red buttons stopped working before updating. But the phone still worked. After updating the ROM, even the phone stop working.
Could you please elaborate on this?
Click to expand...
Click to collapse
The first post dealt with a broken button.
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
eladiogomes said:
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
Click to expand...
Click to collapse
First I would say bad idea blaming your wife in print. That only spells trouble for you later.
I would say take the SD card out, place a CDMA-based ROM on it, put it back in, go into bootloader, and reflash from the card. NRG doesn't cook radio's into his ROMS so you should be good with just an OS flash.
And just in case you don't know how to flash from SD.
1. Unplug USB cable (not necessary, but KISS)
2. With the phone off, press and hold the vol down rocker then press the power button
3. You'll see the rainbow boot-up, then from there just follow the commands on the screen.
4. After is says Upgrade complete (or something similar, it'll be white text in a blue box in the middle of the screen), press the reset button.
Voila.
Hope this helps.
eladiogomes said:
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
Click to expand...
Click to collapse
Man up and take responsibility for your own actions, Eladio.
eladiogomes said:
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
Click to expand...
Click to collapse
I'm wondering just what excatly she was doing to distract you so much that you would flash a GSM ROM on your CDMA device.....
Just follow the instructions in the second post. Next time try to use a proper thread title. "Big Mistake!!! Help" Really doesn't help you any faster!
I could make a small joke about your post but I'm not gonna... ....today....
This thread will probably be closed very soon. You better search before blaming your wife next time
eladiogomes said:
Apparently I installed the wrong Energy ROM into my Sprint, I was setting myself to do so when my wife came and distract me so I entered the wrong thread, downloaded and installed it!!
Anybody can give a north!! Please!!
Thanks,
Eladio
Click to expand...
Click to collapse
You are lucky you only temporarily lost the phone. Other people have worse experiences.
That aside it is easy to fix as mentioned above just put the cdma rom nbh file on the root of sd card and make sure it is called RHODIMG.nbh and then enter into boot loader. The rom will install automatically and you will have your phone restored
cr1960 said:
I'm wondering just what excatly she was doing to distract you so much that you would flash a GSM ROM on your CDMA device.....
Click to expand...
Click to collapse
Please post pics!!!
kimtyson said:
Please post pics!!!
Click to expand...
Click to collapse
lmao...its musta been good
tmotp2jc said:
First I would say bad idea blaming your wife in print. That only spells trouble for you later.
I would say take the SD card out, place a CDMA-based ROM on it, put it back in, go into bootloader, and reflash from the card. NRG doesn't cook radio's into his ROMS so you should be good with just an OS flash.
And just in case you don't know how to flash from SD.
1. Unplug USB cable (not necessary, but KISS)
2. With the phone off, press and hold the vol down rocker then press the power button
3. You'll see the rainbow boot-up, then from there just follow the commands on the screen.
4. After is says Upgrade complete (or something similar, it'll be white text in a blue box in the middle of the screen), press the reset button.
Voila.
Hope this helps.
Click to expand...
Click to collapse
Well, I agree with this causing problems... I was so desperate I wasn't thinking!!! BIGGER MISTAKE!!!
Regarding your instructions it was just perfect, I actually struggled about 3 more hours and none of the ROMs I had/downloaded were working, I thought I really screwed bad... after some more search I found what was happening! The MicroSD card that came with the phone is formated FAT and not FAT32, therefore everytime I was trying it wasn't finding the ROM...
Anyway, all is working now, thanks a lot for the quick response yesterday!
Guys, you're so funny, and helpful too!
I better don't go into details of what she was doing...
I'll do my homework next time, tks for all help!
I have the T-mobile touch pro 2. when i try to boot it, it says directory does not exist. I downloaded the 10/4 one i think. It's the latest blazin one.
Did you format your SD card first? Did you make sure you installed the CAB to your SD? Also, questions like this should go in the Project Android thread.
it is on the SD but it was not formatted. Is it necessary to format?
charburble said:
it is on the SD but it was not formatted. Is it necessary to format?
Click to expand...
Click to collapse
Not always, but it couldn't hurt. All of those 1's and 0's get confused
Alright lol. Ill try formatting it and if it doesn't work I'll post here again
Also if you are from germany and use this android updater:
you need to edit the path from "storage card/andboot" to "speicherkarte/andboot"
it worked for a couple of days, now...i have the same "directory does not exist" problem.
what may have happened?
i can not format the card, because i have to much information on it. anything else?
bogdan_wrc said:
it worked for a couple of days, now...i have the same "directory does not exist" problem.
what may have happened?
i can not format the card, because i have to much information on it. anything else?
Click to expand...
Click to collapse
Eh, something's bungled. You can try deleting (moving, renaming) your data.img, and you know it's possible to copy the data off the card, format it, and copy the data back on to the card, right!??!
Android's still kinda fickle, as this project is still very experimental and changing very quickly. I'm hoping to get to the level that the Vogue got to, but that took a VERY long time!
arrrghhh said:
Eh, something's bungled. You can try deleting (moving, renaming) your data.img, and you know it's possible to copy the data off the card, format it, and copy the data back on to the card, right!??!
Android's still kinda fickle, as this project is still very experimental and changing very quickly. I'm hoping to get to the level that the Vogue got to, but that took a VERY long time!
Click to expand...
Click to collapse
updated with the new startup up utility..and works fine
Where would you go to update the new startup utility
charburble said:
Where would you go to update the new startup utility
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=807117
I tried installing it and rebooting. It gave me the same problem. Am I doing something wrong?
charburble said:
Where would you go to update the new startup utility
Click to expand...
Click to collapse
THIS startup utility.
I installed the startup utility. Wierd thing is, Android worked a lot better before i installed this. The speaker worked, games ran faster, and the whole phone was better.
charburble said:
I installed the startup utility. Wierd thing is, Android worked a lot better before i installed this. The speaker worked, games ran faster, and the whole phone was better.
Click to expand...
Click to collapse
You can feel free to revert to your previous setup, which I assumed never worked. You'll have to actually sort out how you broke it tho, unless you just do a fresh install of a clean build from the archives.
Alright, whenever there is a new update for the Android, the android on my phone totally crashes. It doesn't boot after even if I update. The only way to totally fix it is to redownload and install it.
charburble said:
Alright, whenever there is a new update for the Android, the android on my phone totally crashes. It doesn't boot after even if I update. The only way to totally fix it is to redownload and install it.
Click to expand...
Click to collapse
I wouldn't use the update utility, it causes issues. I manually update, and it always works.
charburble said:
Alright, whenever there is a new update for the Android, the android on my phone totally crashes. It doesn't boot after even if I update. The only way to totally fix it is to redownload and install it.
Click to expand...
Click to collapse
How does it 'totally crash'? Does it do the rhod100 thing of the HaRET loading indicator getting to the end then nothing happens, does it crash during the boot text, or does it crash somewhere else?
Hello, I have an AT&T Tilt 2 and when I want to boot off xdandroid 2.2.1 I did the .cab file, soft reset, startup.txt, went into the program, update, boot. It types a bunch of codes, and stops at misc_register(): OK. And it stays there as long as I can see! It won't go any further, however, when I restart the phone, it boots normally in to WinMo. I'm running the stock shipped ROM. Does that have anything to do with it? I'm not getting any errors or anything, just stuck at that. And I know it's not me not waiting, because I've sat it down for 2 hours straight! Please help I really want Android on my Tilt 2.
P.S. I've tried RAR and CAB, also the Reference & Froyo!
Try a clean bundle. Format the card using the HP tool. Full format, FAT32.
Also, try this bundle. It's the newest of the new.
thephoneguru said:
Hello, I have an AT&T Tilt 2 and when I want to boot off xdandroid 2.2.1 I did the .cab file, soft reset, startup.txt, went into the program, update, boot. It types a bunch of codes, and stops at misc_register(): OK. And it stays there as long as I can see! It won't go any further, however, when I restart the phone, it boots normally in to WinMo. I'm running the stock shipped ROM. Does that have anything to do with it? I'm not getting any errors or anything, just stuck at that. And I know it's not me not waiting, because I've sat it down for 2 hours straight! Please help I really want Android on my Tilt 2.
P.S. I've tried RAR and CAB, also the Reference & Froyo!
Click to expand...
Click to collapse
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
dcmedic said:
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
Click to expand...
Click to collapse
ooooooh!
I will try this startup for my tilt2!
I am having issues like screen landscaping wrong way sometimes etc.
I will report back. Perhaps we get them to pack your startup in the file under "Tilt 2 ATT GSM" or something!
What SD card did you end up getting?
Thanks!
Prodeje79 said:
ooooooh!
I will try this startup for my tilt2!
I am having issues like screen landscaping wrong way sometimes etc.
I will report back. Perhaps we get them to pack your startup in the file under "Tilt 2 ATT GSM" or something!
What SD card did you end up getting?
Thanks!
Click to expand...
Click to collapse
I already had multiple sd cards, Tiad brought it up to try and change my sd card in a conversation the other day, but I'm using a SanDisk 2GB. My SanDisk 4GB is about 4 years old and believe they do wear out. Older cards aren't good for what we need here, since they are basically or on board device storage.
As for the landscaping, sometimes if a hold the phone flat it will switch to landscape left or right, but I usually do not have a problem when I'm holding it in the orientation I'm needing.
That is the same startup file I have used through out 3 different builds. FRX03, FRX04, and FROYO X. I did have overclocking in there, but come to find out it didn't help, I feel that it probably was the cause of a few of my restarts.
I hope everything works out for you. Report back..
dcmedic said:
I already had multiple sd cards, Tiad brought it up to try and change my sd card in a conversation the other day, but I'm using a SanDisk 2GB. My SanDisk 4GB is about 4 years old and believe they do wear out. Older cards aren't good for what we need here, since they are basically or on board device storage.
As for the landscaping, sometimes if a hold the phone flat it will switch to landscape left or right, but I usually do not have a problem when I'm holding it in the orientation I'm needing.
That is the same startup file I have used through out 3 different builds. FRX03, FRX04, and FROYO X. I did have overclocking in there, but come to find out it didn't help, I feel that it probably was the cause of a few of my restarts.
I hope everything works out for you. Report back..
Click to expand...
Click to collapse
will do!
which exact package are you using now?
link appreciated if not already posted above.
Is it a good idea to delete the ts-calibration file as in XDAndroid2.2Froyo.012211 ?
Any other cleanup measures?
Prodeje79 said:
will do!
which exact package are you using now?
link appreciated if not already posted above.
Is it a good idea to delete the ts-calibration file as in XDAndroid2.2Froyo.012211 ?
Any other cleanup measures?
Click to expand...
Click to collapse
I'm using the same package as arrrrrgh posted in Post #2. I just left the touch screen calibration file that came with the package. No other clean up, other than full format to fat32 with your preferred utility.
dcmedic said:
I'm using the same package as arrrrrgh posted in Post #2. I just left the touch screen calibration file that came with the package. No other clean up, other than full format to fat32 with your preferred utility.
Click to expand...
Click to collapse
OK cool, I will give that load a shot tonight.
As of now I am using: XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE
My screen issues are gone now with those tweaks! thanks so much!!!
Although now this thing seems dog slow.
I took out my line "clock-7x00.a11=500" which I think is just stock anyway.
You do not use this command as you noted issues overclocking. Thus yours should be stock speed too right?
This thing is sloooooow now from earlier with my old 'incorrect' stock config in the RAR package.
I also have the weird typing issue in which I press c once (on the hard keyboard slideout), but cccc appears. I think if I type a word super slow, it works better.
So if i type cingular at a decent pace, it will type out 'ccccingularrr'
Any leads on that?
you may need to delete your data.img file and rebuild it with the new startup.txt. that way android is running at stock speed during the setup. shot in the dark.
Sent from my Tilt 2 using the XDA mobile application powered by Tapatalk
Prodeje79 said:
OK cool, I will give that load a shot tonight.
As of now I am using: XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE
My screen issues are gone now with those tweaks! thanks so much!!!
Although now this thing seems dog slow.
I took out my line "clock-7x00.a11=500" which I think is just stock anyway.
You do not use this command as you noted issues overclocking. Thus yours should be stock speed too right?
This thing is sloooooow now from earlier with my old 'incorrect' stock config in the RAR package.
I also have the weird typing issue in which I press c once (on the hard keyboard slideout), but cccc appears. I think if I type a word super slow, it works better.
So if i type cingular at a decent pace, it will type out 'ccccingularrr'
Any leads on that?
Click to expand...
Click to collapse
Holy crap dude... search. You've asked so many questions that have been answered previously, seriously.
With that said, all the issues you describe are all related to the system_server bug. Just make a call to voicemail (or any call really) and it'll clear up. We're looking into the cause and a potential solution.
dcmedic said:
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
Click to expand...
Click to collapse
Hello, thank you for the quick response. I did exactly what you said. And once I tap Haret it codes and stops at misc_register(): OK still... Any other suggestions? Thank you agian.
it probably doesn't matter, but is your phone all unlocked etc and able to be flashed with any winmo rom?
using olipro?
just trying to think of any differences with our phones.
Prodeje79 said:
it probably doesn't matter, but is your phone all unlocked etc and able to be flashed with any winmo rom?
using olipro?
just trying to think of any differences with our phones.
Click to expand...
Click to collapse
What is unlocked? Isn't that where T-Mobile would be able to use it?? If not, please explain. Sorry for my stupidness. lol
Is it like jailbreaking and/or rooting?
You do not need to do hardSPL unlocking to use Android from the SD card.
I would imagine with NAND builds you would... but since this all runs off the SD card, no need for HSPL.
Assuming you're using that build that was posted in post #2, it should work just fine - did you make any changes to it, or just extract it to the root of your SD and hit haret.exe...?
thephoneguru said:
What is unlocked? Isn't that where T-Mobile would be able to use it?? If not, please explain. Sorry for my stupidness. lol
Is it like jailbreaking and/or rooting?
Click to expand...
Click to collapse
well mainly just the hard SPL unlocking. Not the sim.
very easy.
see the stickies here: http://forum.xda-developers.com/forumdisplay.php?f=490
mainly:
Hard-SPL Unlocker for Rhodium (AT&T Tilt 2) Released and Updated! New FAQ added!
http://forum.xda-developers.com/showthread.php?t=550131
and flashing...
[Resources] Flashing your First GSM Rhodium Rom (For Noobs)
http://forum.xda-developers.com/showthread.php?t=550540
if you do this don't forget to task 29!
http://forum.xda-developers.com/showthread.php?t=649191
I use the energy rom GTX:
http://forum.xda-developers.com/showthread.php?t=562773
I just backed up all my contacts on my SD card with pimbackup and restored them to the new rom....
Again, to thephoneguru - you do not need to do that ^^.
Only if you want to install a custom WinMo ROM, or if you're flashing to full Android (which is not recommended at the moment!) do you need to do HSPL.
arrrghhh said:
You do not need to do hardSPL unlocking to use Android from the SD card.
I would imagine with NAND builds you would... but since this all runs off the SD card, no need for HSPL.
Assuming you're using that build that was posted in post #2, it should work just fine - did you make any changes to it, or just extract it to the root of your SD and hit haret.exe...?
Click to expand...
Click to collapse
I did not make any changes at all I just put the androot directory on the root of my sd, went to the file explorer and tapped haret.exe. Also, the sd card was just formatted (non quick format) to FAT32.
arrrghhh said:
Again, to thephoneguru - you do not need to do that ^^.
Only if you want to install a custom WinMo ROM, or if you're flashing to full Android (which is not recommended at the moment!) do you need to do HSPL.
Click to expand...
Click to collapse
well we get the picture!
its the only difference I can think of in our phones.
I say give it a shot, it is so simple!
Prodeje79 said:
well we get the picture!
its the only difference I can think of in our phones.
I say give it a shot, it is so simple!
Click to expand...
Click to collapse
How is it so simple? Can you explain the procedure? Thank you.
thephoneguru said:
How is it so simple? Can you explain the procedure? Thank you.
Click to expand...
Click to collapse
He posted a lot of links on how to do it... Post #15?
It won't have any effect on your issue tho. It'll only enable you to flash custom ROMs if you so choose to do so.
Let's focus on your issue. Can you tell me where it stops? Does it always stop at the same place? Have you tried different kernels? Any different builds? Have you tried the newest FRX04 build?