Develop Bugs

Device unresponsive no matter what rom?

HI all,
I'm having some fun and games with my Orbit today.
I previously had an old version of black & Blue on there. SO today decided to update to have a go with some manilla based ROMS.
First I Tried YuE_v11.3_3.15.20755_Lite_M2D_WWE
Which seemed to work ok but after a while applications were being very slow.
So then I tried to reflash oop, but that seemed to fail.
I Tried to flash love, but it wasn't ever getting to the progress indicator on flashing, so did an SD flash of YuE which worked.
So then tried to flash Love from that minimal YUE and the device is being really slow, like gets to the calibration and takes about 5 mins to swap between screens.
What's the best way to totally clear down the rom and start again on this?
Thanks

I've now flashed the Official UK O2 WM6 ROM and still having problems. Flashed succesfully, but when it boots up, it just sits on the "Windows Mobile" screen and beeps a bit

Current State after O2 flash :
IPL : 3.04.0001
SPL : 3.04.0000
GSM : 03.06.90
OS 3.4.0.0
Any help gratefully appreciated.
Thanks

Hard reset the device, and while you're in the config wizard, plug in your device and flash to new rom. That way it's completely formatted and you'll have a fresh new install... hope it works mate

I did a hard reset, still no joy, hangs on the welcome to windows screen
I can access the Bootloader, but can't find a way to flash a rom from there, all seem to want it done once you've made an activesync connetion

flash YUE back via SD card flashing

I already tried that, flashes fine, but becomes unresponsive soon after

have tried flashing O2 WM5 + WM6 from SD, but still no joy.
It just flashes, loads up WM(5/6) then hangs there, beeping sometimes. Pressing the green button brings up the calibration screen. I sometimes see bits of apps, today screen, but that's about it, it's generally unresponsive.
Any suggestions?
ta

A little update incase someone can help?
I left the battery out of the phone all night last night, and this morning the phone worked great.. for about 2 hours, then it froze. I hard reset, and it's back to freezing after OS loading now

What's up if you remove your MicroSD card ?

That makes no diff, i've tried flashing with + without the SD card (it's currently out), flashing from windows + flashing from microSD, all ends up the same way, with an unresponsive device once the OS boots.

HTC Touch Diamond (Sprint) will not make it past "Touch Diamond" screen.

I am no stranger to forums, or 'modifying' electronics. However, this was my first hack at my Touch Diamond. I went through all the proper procedures to update to WM6.5 (or so it seemed) but now, after installing a ROM
(http://forum.xda-developers.com/showthread.php?t=506533)
the phone only shows the splash screen, then resets and continues to go through this continuous loop. I cannot access the phone, or get booted to the point where I can connect to the PC. Any ideas, as I am sans phone right now. TIA!

Do you flash a hard-SPL ?
Are you sure the ROM's archive isn't broken ?
The connection on the bootloader mode was good, synced with windows?
I think you didn't flash a rom before ? If yes, no problem, if you flash an other rom before, maybe use the MTTY method.

see how this guy could have saved him self time if the thread in my description was stickyed...
MTTY thread... look there. after that ur green to go again.

I do believe people are successfully using the ROM.
The connections were all fine. I had to first install a new bootloader, then updated the radio device (all worked fine). I then went to update the OS, and the process went through just fine, but when the phone booted, it just keeps cycling through the opening splash screen.
My problem is that I cannot get the phone past that screen to do anything.

reb0rn, thank you! The 'boot to flash' was what I was looking for. The 'Volume Down" with "Power On" was what did the trick (I was doing all sorts of other combinations with the 'reset' key).
I'm loading a new version onto the phone as we speak - wish me luck, and thanks again!

Diamond stuck at configuring screen after Rom upgrade

Dear all,
Desperately need help and deeply appreciate if anyone could shed some light.
I recently upgrade my rom. The rom upgrade without problem, after I installed couple of applications, the phone was hang after restart.
I tried re-flashing the rom couple times and it seems everytime restart, the rom will hang.
After several re-flashing, my phone now stuck at the screen where, it stated, system is being configure and stuck on this screen forever.
I tried reset the rom by Vol-down & back key as well as vol-down & center key, Rom upgrade completed successfully but upon phone restart, my phone keep stuck at the same screen.
I do noticed that, by resetting the phone into bootloader mode (reset with Vol-Down, back key) with USB cable attached to my phone, the bootloader detected USB connection but time out.
Is there any software which I should install on my laptop which allow me to transfer another diamimg.nbh to this phone?
Thank you

decent_devil said:
Dear all,
Desperately need help and deeply appreciate if anyone could shed some light.
I recently upgrade my rom. The rom upgrade without problem, after I installed couple of applications, the phone was hang after restart.
I tried re-flashing the rom couple times and it seems everytime restart, the rom will hang.
After several re-flashing, my phone now stuck at the screen where, it stated, system is being configure and stuck on this screen forever.
I tried reset the rom by Vol-down & back key as well as vol-down & center key, Rom upgrade completed successfully but upon phone restart, my phone keep stuck at the same screen.
I do noticed that, by resetting the phone into bootloader mode (reset with Vol-Down, back key) with USB cable attached to my phone, the bootloader detected USB connection but time out.
Is there any software which I should install on my laptop which allow me to transfer another diamimg.nbh to this phone?
Thank you
Click to expand...
Click to collapse
you should try mtty...it formats your phone and solves all the problem like the yours..a guide to use it is in a sticky thread
or you can try downloading any rom and usually the chef includes a file called customRUU.exe..put your phone in bootloader mode then flash trough customRUU.exe

HELICOPTER88 said:
you should try mtty...it formats your phone and solves all the problem like the yours..a guide to use it is in a sticky thread
or you can try downloading any rom and usually the chef includes a file called customRUU.exe..put your phone in bootloader mode then flash trough customRUU.exe
Click to expand...
Click to collapse
Thanks, Managed to extract one Rom and restore my phone via customRUU.exe.

[Q] Cavalier got stuck

hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..

umer92 said:
hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
Click to expand...
Click to collapse
use the method MTTY to fix it, after that reflas with official rom

hey, i have tried every thing for couple of weeks, but its not working for me, as when my cell phone restarts it stucks on the welcome screen, is there any way to delelete the operating system and install it again?

Sequence for recovery is (don't execute the next step if one gets your device back to life):
Soft Reset (Reboot) - this did not help obviously as you wrote.
Hard-Reset - mind that first boot will take much longer than usual, some minutes (up to 10 - depending on the device) will pass until the device is ready again. This is because all operator and init-specific things must be executed on the device with first boot. Be patient and do not interrupt - it must finish by itself. -You may just be stuck here!
Re-Flash the right shipped ROM - mind that the device can only receive the CID matching original ROM, not just any ROM (yet). You must do that while the device is waiting in bootloader mode, otherwise the RUU may not be able to access the device.
Gold-Card Flash a close-matching ROM (so one with same languages and the right device).
Please describe in detail what you did already and what were the results of your actions.

hey thankz, but i tried everything, all the steps you written above i them them all, nothing happened,, please help me,, my fon is stuck for couple of months.. it just shows the welcome screen, nothing else.. is there is a way that i can flash the operating system and reinstall it??
waiting..

bring the device to go into bootloader mode by Hold the camera button on the right side, press the power button. The phone will enter the " bootloader " mode and you 'll see the tricolor boot screen. after that reflash the device with shipped rom can you get at ftp://xda:[email protected]/Uploads/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/

[HELP] Stuck on Samsung Logo

Already searched in some areas of the forum, but nothing helpful.
I have got a N7100XXDLL4 Note 2. It has a H3G Italian Rom (as i've taken in a H3G store).
All of those useless apps... it's an umbearable pain.
So... i decided to change that rom to another one.
I don't remember all the steps i've done... but surely i've used the toolkit of mskip and all go flawlessly. No Fails or something.
I've noticed that CWM (or TWRP) while loading causes a "tremolo" screen all vibrating on the first "Galaxy Note 2 Gt N7100" screen
nevermind...
Cwm loaded, full wipe, rom installed (ParanoidAndroid, to be precise) and rom started
I've noticed that the rom... in charging... doesn't show the bootscreen or welcome screen (it was all black, and i've got to tap on the capacitive buttons to understand if the device was on or off) then... pressing home buttons several times screen wake up in the pin code (without the classic config wizard).
Several soft reboot to get the rom doesn't manifest that black screen problem, nothing
Several tries to get the rom working properly flashed, but nothing
So... i don't remember all the steps i've done with the toolkit... but now changing roms it causes a stuck on the bootscreen/samsung logo
Tried to find a solution and someone used this thread, but again nothing useful.
I need a solution to perform a FULL reset of the phone (any rom, any firmware) with odin, kies, whatever.
Doesn't matter if the flash counter is down or not
Thanks for reading and sorry for my bad english

http://forum.xda-developers.com/showthread.php?t=2088809

Thanks in advance, i'll try it very soon

thanks mate... problem solved with Kies!!!
(it was stucked again in the blue pulsing logo, but once in recovery mode after a cache/data wipe, it started without problems)
Many many thanks... life solver ^^

Blackbeast said:
(it was stucked again in the blue pulsing logo, but once in recovery mode after a cache/data wipe, it started without problems)
Click to expand...
Click to collapse
Thats only you needed after flashing any ROM at first place.

Coming from a SGSII and never done a full wipe after flash
(always done before flashing.. good to know so i'm always learning)
thanks to all of you!