Memory management for dash? - HTC Excalibur

I run Rose ROM v 1.7 made by Ricky & Stylez. There is the free memory function there. If I quit all the programs and use the free memory tool, I can only get about 12mb of RAM free... Is there any way how to get more free RAM???

As stylez suggested, there is something called PagePool. Don't do it though, because it slows down the Dash... very much.

You'll have to do what we all do... soft reset the phone at least once a day (usually twice). Windows Mobile is notorious for memory leaks and this doesn't have anything to do with what rom you're running.

Capitan Totti said:
As stylez suggested, there is something called PagePool. Don't do it though, because it slows down the Dash... very much.
Click to expand...
Click to collapse
I love the way i get quoted, yet i have not mentioned pagepooling RoseROM in a long time only Kavana & Rickyremade...
& will not slow the ROMs down that i sugested using on.
Like uansari1 said notorious leaks in WM a reset a day keeps the doctor away

stylez said:
I love the way i get quoted, yet i have not mentioned pagepooling RoseROM in a long time only Kavana & Rickyremade...
& will not slow the ROMs down that i sugested using on.
Like uansari1 said notorious leaks in WM a reset a day keeps the doctor away
Click to expand...
Click to collapse
Then you must have bad memory because I asked you the same question the other day and you told me to use pagepool to 4.5 and when I asked you why the phone was going slow and told you if it were the pagepool... you said yes and explain me why too.

Capitan Totti said:
Then you must have bad memory because I asked you the same question the other day and you told me to use pagepool to 4.5 and when I asked you why the phone was going slow and told you if it were the pagepool... you said yes and explain me why too.
Click to expand...
Click to collapse
No you asked and i commented on Kavana and explained how then you flashed RoseROM and used the PagePool.
Quote: Myself:
14-15MB after using things if fine, even using CeleTask or SKTools free RAM you will never claim back the ammount used WM is renound for memory leaks so little bit of memory get lost and unreclamed.
If you are using Kavana or Ricky Remade would advise pagepool 4.5MB you will then have aprx 27MB free RAM on boot and no nock on of slow down with speed of ROM due to the pagepool.
Click to expand...
Click to collapse
Notice the BOLD
uansari1:I know Stylez recommends leaving the Rose pagepool stock, but dropping the older Kavana and Ricky roms to 4.5mb... guess we'll see.
Click to expand...
Click to collapse

Making up stuff aren't we?
He is asking how to get more free M, and as you told me, I am telling him to use pagepool, which is IMO a bad idea no matter which ROM you use. I am sorry buddy but... is English your first language? Just out of curiosity.
And here is what was really said.
http://forum.xda-developers.com/showthread.php?t=444276&page=82
Capitan Totti said:
First of all, I did the pagepool thing like you said at 4.5. I got around 24 M steady so thats great... but I noticed that the phone runs muuuuuch slower, when I click back, when I install or uninstall something. How come? Is there something related to the pagepooler?
Click to expand...
Click to collapse
stylez said:
Yeah the speed decrease is due to pagepool RAM or Speed they knock each other, tended to use RoseROM without...
Click to expand...
Click to collapse

Capitan Totti said:
...huuuh yeah...
He is asking how to get more free M, and as you told me, I am telling him to use pagepool, which is IMO a bad idea no matter which ROM you use. I am sorry buddy but... is English your first language? Just out of curiosity.
Click to expand...
Click to collapse
No i know English not first language
The pagepool is fine on the ROMs i note & if you use the pagepool on them you will see no speed decrease.
Don't take me wrong way bruv, just don't want to be seen for saying something i didn't.

Capitan Totti said:
Making up stuff aren't we?
He is asking how to get more free M, and as you told me, I am telling him to use pagepool, which is IMO a bad idea no matter which ROM you use. I am sorry buddy but... is English your first language? Just out of curiosity.
And here is what was really said.
http://forum.xda-developers.com/showthread.php?t=444276&page=82
Click to expand...
Click to collapse
Yes you had already pagepooled so answered your questions
And in none of my replies do i recomend pagepool on RoseROM!!!
P.M.S.L
"Anyway the OP has been answered nuff said"

stylez said:
No i know English not first language
The pagepool is fine on the ROMs i note & if you use the pagepool on them you will see no speed decrease.
Don't take me wrong way bruv, just don't want to be seen for saying something i didn't.
Click to expand...
Click to collapse
stylez said:
Yes you had already pagepooled so answered your questions
P.M.S.L
And in none of my replies do i recomend pagepool on RoseROM!!!
Click to expand...
Click to collapse
I never said you recommended I said you suggested it.
PMSL?
I think you are misunderstanding things then.
If you read above, its exactly what you stated...
And please answer my PM.

Capitan Totti said:
PMSL?
I think you are misunderstanding things then.
If you read above, its exactly what you stated...
And please answer my PM.
Click to expand...
Click to collapse
You: Hey stylez, I flashed your ROM v1.7a.
Gonna test it for a week or so to see if I will keep it running or go back to Kavana's.
It looks real good btw. I like the black HTC logo thing when you start it. You got some nice themes with the green/black, which is more of a esmerald to be honest, the grey bars are cool, even though you have double sounds like two Old School tones, and others. Really like the new image for when you lower or make higher volume.
Great thing is that...
CHome is cool. Not an expert yet but I am playing around with it, reading also the thread in here. I tried to install the one for desktop, so to speak, it doesn't work... any reason why? It tells me that the CHomeConfigurator has encoutered a problem and needs to be closed.
I got a couple of questions.
1) First of all, I did the pagepool thing like you said at 4.5. I got around 24 M steady so thats great... but I noticed that the phone runs muuuuuch slower, when I click back, when I install or uninstall something. How come? Is there something related to the pagepooler?
2) When with Kavana 6.1, I had full bars and reception everywhere, but last night I had the phone go on searching way too many times and yes I did configure it for T-Mobile. Any reasons?
3) Can I change the icons using the CHome Config on the phone, or I need the desktop one?
So far not much more. If something else comes to mind I will ask.
Reply With Quote
Click to expand...
Click to collapse
Me: Yeah the speed decrease is due to pagepool RAM or Speed they knock each other, tended to use RoseROM without, if you look @ CHome Config sticky there is a link in first post with detailed instructions & even a video how to set up own panels
Using same Radio as Kavana so not sure why searching
Glad you likeing & feel free to shoot any ?'s @ me bruv.
Click to expand...
Click to collapse
The bolded part is what i answer too "to which i never did recomend you to use on RoseROM as you will see if read previous again" i still do not recommend the pagepool as you will see in later post that i posted in previous from other user.
Never suggested it on RoseROM the same as never recommended it. PMSL
Anyway i'm done as know what i said.......

See what I mean man, don't take it the wrong way, but I never once said you recommended PagePool, I said you mentioned it, big difference.
You are replying for no reason, you are thinking I said something when I never did.

Capitan Totti said:
See what I mean man, don't take it the wrong way, but I never once said you recommended PagePool, I said you mentioned it, big difference.
You are replying for no reason, you are thinking I said something when I never did.
Click to expand...
Click to collapse
My point is that i don't want peeps to pagepool RoseROM unless they wish....
I would not sudgest or recommend pagepool RoseROM and have not done in along time, whereas i would recommend the ROMs noted.
I mentioned the Kavana & RickyRemade big difference.
Oh b.t.w i'm bored so i could respond all day
"Oh so as you and readers know why i picked up on this is because i do not wan't people to PagePool RoseRom and moan @ me for speed decrease"

I don´t wanna go into a big dogfight (no ofenses at all), I want peace.. so...
Why don´t you guys just give this software a try?
Oxios Memory.
It worth every bit and does the job, no matter if you´re using Kavana´s or Rose´s (I´ve tried myself on both rom´s).
Regards

Capitan Totti said:
Making up stuff aren't we?
He is asking how to get more free M, and as you told me, I am telling him to use pagepool, which is IMO a bad idea no matter which ROM you use. I am sorry buddy but... is English your first language? Just out of curiosity.
And here is what was really said.
http://forum.xda-developers.com/showthread.php?t=444276&page=82
Click to expand...
Click to collapse
joeskull said:
I don´t wanna go into a big dogfight (no ofenses at all), I want peace.. so...
Why don´t you guys just give this software a try?
Oxios Memory.
It worth every bit and does the job, no matter if you´re using Kavana´s or Rose´s (I´ve tried myself on both rom´s).
Regards
Click to expand...
Click to collapse
Thanks for the suggestion, but most roms, including Kavana, Ricky v24 and Rose have a free memory function built in with Celetask. Most of us also install SK Tools and SmartToolkit, which also have free memory functions, lol. No need for Oxios Memory, IMO.

stylez said:
My point is that i don't want peeps to pagepool RoseROM unless they wish....
I would not sudgest or recommend pagepool RoseROM and have not done in along time, whereas i would recommend the ROMs noted.
I mentioned the Kavana & RickyRemade big difference.
Oh b.t.w i'm bored so i could respond all day
"Oh so as you and readers know why i picked up on this is because i do not wan't people to PagePool RoseRom and moan @ me for speed decrease"
Click to expand...
Click to collapse
Again, I never said you recommended anything, just that you made of notice that there is something out there that can do the job, you were just... informing. I hope you understand once and for all.
uansari1 said:
Thanks for the suggestion, but most roms, including Kavana, Ricky v24 and Rose have a free memory function built in with Celetask. Most of us also install SK Tools and SmartToolkit, which also have free memory functions, lol. No need for Oxios Memory, IMO.
Click to expand...
Click to collapse
Yeah but we are talking about something else.

Capitan Totti said:
Again, I never said you recommended anything, just that you made of notice that there is something out there that can do the job, you were just... informing. I hope you understand once and for all.
Yeah but we are talking about something else.
Click to expand...
Click to collapse
Cool it quits bruv, no hard feelings.
Hope we both understand

In your PM, I accept your...
Please do ask him.

Capitan Totti said:
Making up stuff aren't we?
He is asking how to get more free M, and as you told me, I am telling him to use pagepool, which is IMO a bad idea no matter which ROM you use. I am sorry buddy but... is English your first language? Just out of curiosity.
And here is what was really said.
http://forum.xda-developers.com/showthread.php?t=444276&page=82
Click to expand...
Click to collapse
bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla.
Some people seem to forget that we're not profesional rom makers, a lot of this is trial and error, deal with it. we get enough help around here(specially from Stylez) to be pointing fingers, every time there's an issue or it doesn't suit you.
BTW, just flash to v24 vanilla a couple of days ago with pagepool(Thank you very much STYLEZ) more ram, more device storage, and no speed loss, thank you Stylez. I only run my overclock to 228mhz, and is running perfect.
I'm sorry, did I thank you Stylez?

roloracer said:
bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla,bla.
Some people seem to forget that we're not profesional rom makers, a lot of this is trial and error, deal with it. we get enough help around here(specially from Stylez) to be pointing fingers, every time there's an issue or it doesn't suit you.
BTW, just flash to v24 vanilla a couple of days ago with pagepool(Thank you very much STYLEZ) more ram, more device storage, and no speed loss, thank you Stylez. I only run my overclock to 228mhz, and is running perfect.
I'm sorry, did I thank you Stylez?
Click to expand...
Click to collapse
I do not understand the reason for this outburst, since you pretty much said nothing that had to do with the convo between me and stylez, which was simply a misunderstanding from his part. Its done with, so, enough.

Related

Black 3.5 With Live Removed and Extra Storage... Download HERE...

Well there seems to be a demand for me to make black 3.5 which was made by JJ i take no credit for it what so ever!! and remove windows live and some other apps. So thats what i did you have 61.88 of program storage and on a clean install 31mb of free program memory!
Ofcourse changed to 4mb pagepool all i can saw is this rom is fast!! I'll post some screen shots up later for you but here is the download link.
Those of you that have used my ROM's in the past know that i remove just about everything i can to save space!
So enjoy...
http://rapidshare.com/files/33919861/Black3.5.rar
UPDATE TEST ROM DOWNLOAD HERE....
http://rapidshare.com/files/34130631/BlackCompress.rar
Could you tell me whats in and what is out please.
errr well JJ didnt leave much in there to start with but the people that have requested me to make this know what i take out. I dont really have the time right now all i can say is the BS you dont need is gone.
Anyone been able to verify what's been removed? I just want to be sure what exactly I'm flashing on my device.
ya i put a trinity rom in there so you all will get bricks lol... Gez people those that wanted this will download and install those that dont know what i do dont worry and dont flash or flash JJ's its the same thing just mine has more storage and 4mb pagepool
another link please?
Could somene please post another link, I have to wait like 40 minutes with rapidshare
........Finally Got It!
Good Work, Thanks austinsnyc
i'll put it on mega one minute
wait, wait
Rapidshare for the first time reported 40 minutes, at to other opening 115 minutes.... bad saved
....follow the jj 3.01 black ....at the bottom of the first post...
I love it all these N00bs saying my work is bad... folks knock it all you want im rocken 62MB of Program storage and 4mb pagepool... I guess i will keep this **** to myself next time....
Peace
i Feel that some people need to thank others for the work that they put in. Austinsnyc... the clean rom is wicked thanks for the great work and hope it carries on even though the N00bs continue to put down the good work.
D
austinsync - do't let noobs bother u - just ignore them.
ur rom version rocks!
having fun with it now
It works just fine, it's for all those who still can't believe it's real. Thanks for the release.
Thanks peeps... I dont know of any other ROM's with 62MB of program storage lol... JJ should get all the credit since it is his rom i just took stuff out that most of us dont use and takes up space. I still dont know why he went with a 6MB pagepool i think 4MB works pretty damn good and is a little faster then 6MB
NIce work! Anyone noticed some bugs?
pello said:
NIce work! Anyone noticed some bugs?
Click to expand...
Click to collapse
I'm sure there might be one or two do you have any since you didnt list anything
no bugs till now
austinsnyc great job !!
i was waiting for something like this !
austinsnyc said:
I love it all these N00bs saying my work is bad... folks knock it all you want im rocken 62MB of Program storage and 4mb pagepool... I guess i will keep this **** to myself next time....
Peace
Click to expand...
Click to collapse
Hey friend,
The best way to get rid of a pests (NOobs) is just ignore them. The majority of responsible members appreciate all the hard work and,effort and dedication that goes into the kitchen. We need creativy here to stimulate invention!
Keep up the great work.
Best regards
austinsnyc said:
I'm sure there might be one or two do you have any since you didnt list anything
Click to expand...
Click to collapse
Hey austinsync,
do you mind making post over at 4wm regarding the mod you did?
thanks
JJ
jasjamming said:
Hey austinsync,
do you mind making post over at 4wm regarding the mod you did?
thanks
JJ
Click to expand...
Click to collapse
Done... people there is also a link over on 4winmobile to take a look at if you like i will be supporting both but over there mostly.

Dell Axim X50v WM6 A02 RTM with 0Mb PP (Discussion/Download)

I opened a new thread to discuss the effects of Maglite's WM6 A02 ROM with 0Mb PAGEPOOL and to not overload his own thread.
All info transfered from the original post and waiting for feedback.
Test this please:
- Check if Filesys.exe hits harder or smoother.
- Check if there is any diference in responsivness(faster/slower)
- Install apps to your Main Storage and test
Note: All of the hard work was made by Maglite_Rus, i just changed the PagePool for testing.
Until now, all is good. My Axim is fast, Filesys.exe appears,but very smooth and briefly.
Zeus_Alex
Uploading WM6 with 0Mb Pagepool to rapidshare... It will be up in a few moments for who wants to try it...
It has no changes yet, but its very good... In my spare time, will change some stuff, adding some more, removing a few stuff and then ill tell you guys whats new or not...
Greets from Portugal..
Edited: Now its the right link, the 0Mb PP rom..Ehehe...
http://rapidshare.com/files/57962070...o_0Mb.rar.html
Its the same procedure to flash.
Copy both files to root of SD Card with Fat32, press Wireless + Power + Soft reset to start...etc, etc...
Test it and tell something... I tested in 2 different X50v's and had diferent results in both..Mine has near 40Mb of free RAM and its quite fast, with no problems changing from one app to another.
The other one i flashed, had only 36Mb of Free Ram and it was as fast as mine...I dont understand why the Free RAM is diferent from one to another and with the same rom...Strange..lol...
P.S. - Try it at your own risk.. dont want to be blamed or flamed if anything goes wrong...
Greets again from Portugal...
Click to expand...
Click to collapse
I instaled 0mb pp version on my axim and only have 30 mb free.
When finishing instalation, first time of use I experimented a very low speed, and filesys.exe was stuck at ~50% of processor for several minutes.
Then work fine, not too fast, but fine, with wisbar installed work better.
I still have the filesys problem, 3 times on the day, for severals minutes the processor at ~50%.
I've give to 0 pp few more days.
Good try, but my guess is that when you set the pagepool to 0, it is like to let windows mobile o/s decide what pagepool is suitable for your axim. and the decision is dynamic. That explains why sometime you get 34MB free ram while the other times you get 30MB free ram.
Rember what windows xp does when you let xp decide its Virtual Memory on its own.
jianxiongchen said:
Good try, but my guess is that when you set the pagepool to 0, it is like to let windows mobile o/s decide what pagepool is suitable for your axim. and the decision is dynamic. That explains why sometime you get 34MB free ram while the other times you get 30MB free ram.
Rember what windows xp does when you let xp decide its Virtual Memory on its own.
Click to expand...
Click to collapse
I dont think that the OS is deciding what pagepool to use, but something is happening because for me, filesys is much smoother.
But as i said, its just a test, nothing to serious, altough the rom is very stable.
But a few minutes ago i had an idea to, maybe, stop filesys.exe from hitting. A few more days and, if it works, ill release it for testing. But please, no PM's about it as this is only an idea of mine, and im going to have to rebuild the entire system..
Thank you both for your feedback.
jianxiongchen said:
Good try, but my guess is that when you set the pagepool to 0, it is like to let windows mobile o/s decide what pagepool is suitable for your axim. and the decision is dynamic. That explains why sometime you get 34MB free ram while the other times you get 30MB free ram.
Rember what windows xp does when you let xp decide its Virtual Memory on its own.
Click to expand...
Click to collapse
I think like you. But by other hand, I go to settings -> memory and says Total: 61.34 mb (with pp 0mb) and 57.32 mb (with pp 4mb).
Zeus_Alex said:
But a few minutes ago i had an idea to, maybe, stop filesys.exe from hitting.
Click to expand...
Click to collapse
By this, do you mean remove Filesys.exe entirely from Windows Mobile? Or are you referring to some other method of keeping Filesys.exe from firing as often?
I hope it's not the former, as removing Filesys.exe completely could seriously reduce the expected lifetime of an Axim. (as I'm sure you already know)
kriketronic said:
I think like you. But by other hand, I go to settings -> memory and says Total: 61.34 mb (with pp 0mb) and 57.32 mb (with pp 4mb).
Click to expand...
Click to collapse
WHAT?!?! Are you talking about having ~60mb of free RAM???
cavyman said:
WHAT?!?! Are you talking about having ~60mb of free RAM???
Click to expand...
Click to collapse
He's refering to the total of ram, not the free and available...eheh..sure it would be good having the total of 64Mb..eheh...
As for my ideia, i was thinking of another aproach on filesys.exe...not removing it completely, as the Axim could be very unstable. But i am thinking in switch it with another one...I have to make some tests an probably will damage one of my X50v's, but i think it will work...
We'll see...
cavyman said:
WHAT?!?! Are you talking about having ~60mb of free RAM???
Click to expand...
Click to collapse
TOTAL!!!! When you change PP the total is modified RAM. Why?? I don't know.
kriketronic said:
TOTAL!!!! When you change PP the total is modified RAM. Why?? I don't know.
Click to expand...
Click to collapse
Okay, I see now. Now that I've looked at it, it does seem strange. It's saying I have roughly 18mb of free RAM, but I'm running without any slowdowns whatsoever! It doesn't make sense, but it's hard not to like it anyway!
I'm excited to see what happens with the alternate "Filesys" that you have in mind, Zeus! I hope it doesn't brick any of your Axims though!
Ok..so, let me explain whats going up to now...
I'm testing my idea as we speak but having some dificulty. I've sucecssfully tested and make my idea work, but not all traces of compactation disapeared.
What i want is really to make compactation go away or not being noticed.
Here's how all of you can help.
I have to check the specs of all PDA's, but not Axim's, with the Filesys.exe file on it... If you dont mind, you could help.
Just install a process viewer and check if filesys.exe is running. If your system has Filesys.exe, post the specs of your machine here and, if possible, the file "Filesys.exe".
I need help from all of you to make this work. All devices could help...
Thank you.
Note: I've attached a free taskmanager tha will do...Its very good. If you dont have any, try this one.
Zeus_Alex said:
Ok..so, let me explain whats going up to now...
I'm testing my idea as we speak but having some dificulty. I've sucecssfully tested and make my idea work, but not all traces of compactation disapeared.
What i want is really to make compactation go away or not being noticed.
Here's how all of you can help.
I have to check the specs of all PDA's, but not Axim's, with the Filesys.exe file on it... If you dont mind, you could help.
Just install a process viewer and check if filesys.exe is running. If your system has Filesys.exe, post the specs of your machine here and, if possible, the file "Filesys.exe".
I need help from all of you to make this work. All devices could help...
Thank you.
Note: I've attached a free taskmanager tha will do...Its very good. If you dont have any, try this one.
Click to expand...
Click to collapse
WoW, I looking forward to it.
Don't blame me if I ask a dumb question.
Since filesys.exe is a necessary process on wm device.Although it would attack by no reason.Sometimes It actually do it's job.If force to suppress the cpu usage.When filesys.exe actually doing the right thing, reading or writing rom and eat 100% cpu usage in a short while.Maybe suppress is not a good solution in this situation that causing slow down.
Rom link is dead. just letting you know
Let me tell you the correct file name to get a persistent upload:
"in_this_file__is_Chuck_Norris_you're_adverted"
Without jokes, this file is down, always that I say myself "um Im going to get..." when clic the link... If I get the file, I'll upload to another site, for sure!
Sorry abou the link guys...Maybe it was the name..lol...
I'll upload it as soon as i get my hand on my home pc..Or maybe who has the file already, may upload it too and share the link...
Very soon, i promisse you..no more filesys and slowdowns. Im working on it and right now i am posting this with one of the test X50v with a "hacked" filesys...Its not perfect yet, but will be.
I'll be in touch.
Thank you
That would be great, wait&see dont you?
just installed wm6 0mb pp, and it say total memory 61.34,in use 32.25 and 29.09mb free memory, now i am going to install programs to see how it will work then...
danijel
drakic said:
just installed wm6 0mb pp, and it say total memory 61.34,in use 32.25 and 29.09mb free memory, now i am going to install programs to see how it will work then...
danijel
Click to expand...
Click to collapse
Hi.
That was quick..eheh..Im sure you will like it, but tell me the results after ok?
And one more thing, could you upload the rom to rapidshare and post a link so that other users can try? I'll have access to my pc tomorrow only and cant upload it my self..
Thank you in advance.
Zero PP don't solve "filesys problem"...
This problem associated with the type of flash ROM memory because NOR flash is too slow for writing information...
MagLite_RUS said:
Zero PP don't solve "filesys problem"...
This problem associated with the type of flash ROM memory because NOR flash is too slow for writing information...
Click to expand...
Click to collapse
First of all, is a pleasure to see you post here and knowing you are reading this thread. Thank you for all the hard work.
Ok, now to the point.
I know that the PP hardly affects or resolves the compactation thread that is present in all our X50v's.
I also know that NOR is far more slow writting, but if you noticed, and im sure you did, reading is much faster and no slowdowns are present.
My idea is as simple as that. Without "bricking" our Axim's, im trying to implement faster speeds writting blocks of NOR.
Thats why im testing it myself and not sharing it for now. If theres any chance of bricking it, it will brick only mine and no one elses Axim. Once i am certain of the results, i'll post here.
For now, just testing and adjusting...
Greets

Request Custom made ROMs here (it's what YOU want)All current requesters please read!

First of all, HUGE thanks to psuarmy, bilbobrian, and bepe (they know why). Last year, in my first period class (basketball), somebody decided to jack my 8525 and took off with it which upset me a lot. Well, i finally got an 8525 so i can cook for it. I've spent quite some time getting it all ready and it's finally good to go.
I offered this same service for the Kaiser and a lot of people seemed to like it so i thought i'd bring it here. It'll bring a lot more load on me, but i'm on summer vacation until the 25th and then school starts (will continue to do this even when i have school hopefully).
Most chefs tend to cook what the majority of the people like including myself. When i cooked my first ROM and asked people for feedback/suggestions, i did get a few programs that everybody liked but there were many suggestions of programs that each different user liked. So i could have cooked Livcast in which Joe wanted, but Mary wouldn't use it at all; that kind of thing
I couldn't get anybody to cook what i wanted so i did it myself So i'm opening up this thread for ANYBODY who has a request to cook a ROM which can include ANY program (or rather anything they want). I will cook commercial programs, but will NOT include any license/registration key; that's up to you to get. The format should look something like this:
Programs: Thousands of these.
Games: Thousands of these to
Version: Here you can tell me whether you want a cube version, non-cube version, diamond build, etc.
Other: Whatever else you'd like.
Preferred Upload Host: Have problems with RS? No problem, just tell me the site and i'll upload it there. I can also upload to Jannaa's blogspot thanks to her generosity!
You can help aplace4u.biz to stay free.
Chances are that I probably have access to the programs you want, so i'll make them to an OEM if i don't already have them.
I'm on summer vacation so I have quite some time and i'd like to devote it in helping out (not just here but anywhere). If this doesn't go so well, i'll just ask a mod to delete the thread.
This is 100% FREE and i'd like to help as much as I can, but if you can/are able to, i have PAYPAL @ ksallstar2013 at yahoo.
Thanks to all the following supporters:
-dr_tracker
Ooo! Like the sound of this.
Programs: Samsung time, iContact, Windows live, office, pocket rar, softkey changer, pocketIRC, Schaps advanced config, Oxios Memory, phm regedit, and finaly pbar.
If you dont have any of these, just ask and ill post them up.
Games: just the default ones will do
Other: button 5 fix, and com manager toggle vibrate fix. As clean as you can, maybe take out error reporting, managed programs, and clear storage as well as the normal stuff like welcome centre.
I would like HTC connection wizard in there as well.
10 button black comm manager, and this dialler.
Version: I dont mind to much, I dont use anything like the Cube, just the newest you have. (WM6.1 of cause) I see build 20273 around, maybe newer if you have it
If i missed anything, just say and ill get right back to you!
New chef???
Or you just came back from the future? I have a perfect ROM so far, for what I need, let's see if someone else can come up with some ideas.
zocster said:
Or you just came back from the future? I have a perfect ROM so far, for what I need, let's see if someone else can come up with some ideas.
Click to expand...
Click to collapse
Hes been active on the Kaiser forum for some time, I looked over there quite a bit.
veyka said:
Hes been active on the Kaiser forum for some time, I looked over there quite a bit.
Click to expand...
Click to collapse
That's why I said he came from the 'future' as he's been doing ROMs for the kaiser. I think I have also picked my next ROM for the kaiser, but will see what's on offer here
Lol, now i know what you mean. Well if you read the first few sentences of the post, i had an 8525 before my Tilt. Then some loser jacked it from me when i was dressing out after my practice
I've done over 40 ROMs for the Kaiser (look at the thread or a picture here) It's been great assisting people. Can get extremely stressful, however the outcome is well worth it when people like it
@ veyka, i have everything you said except oxios and pbar; will look into getting those
You should check up for Abusalza and Starbase64 4shared directories on their signatures. They have plenty of cabs ...
kareem9nba said:
Lol, now i know what you mean. Well if you read the first few sentences of the post, i had an 8525 before my Tilt. Then some loser jacked it from me when i was dressing out after my practice
I've done over 40 ROMs for the Kaiser (look at the thread or a picture here) It's been great assisting people. Can get extremely stressful, however the outcome is well worth it when people like it
@ veyka, i have everything you said except oxios and pbar; will look into getting those
Click to expand...
Click to collapse
Here you go! Cant wait to see the results!
Edit: If you can make pbar into a cab as well, you will have my eternal gratitude
Lol, thanks for the attatchments, but I already had them downloaded after you requested them . I'll try to make pbar into a cab, no problem
kareem9nba said:
Lol, thanks for the attatchments, but I already had them downloaded after you requested them . I'll try to make pbar into a cab, no problem
Click to expand...
Click to collapse
Fantastic! thanks!
One last thing, can you use the 1% battery dill, if you don't by default
zocster said:
That's why I said he came from the 'future' as he's been doing ROMs for the kaiser. I think I have also picked my next ROM for the kaiser, but will see what's on offer here
Click to expand...
Click to collapse
Ahh! I didn't quite get you the first time! Its always good to see a new chef, now that so many are leaving to the Touch Pro.
Welcome Chef...Good to have U cooking in the Hermes hood!!
What ever clean lite recipe U want to prepare would be cool!
Salaams ahki, If possible could you cook a L26v10 version for my hermes
inshaAllah. would be greatly appreciated.Shukran wa-salaam
@ galaxys, so you just want a lite rom with the essentials?
@ veyka, i think it's in but i'll check.
@ naimsiddqi, inshallah akhi. S you want a Diamond based ROM?
I am also moving to cok for the Rapahel, however i will hopefully never leave the Hermes and the Kaiser.
kareem9nba said:
@ veyka, i think it's in but i'll check
Click to expand...
Click to collapse
Fantastic, cant wait to give it a wizz!
I know some people like certain page pools so if you wuld like any value, tell me. I will put the fault ones on 16.
kareem9nba said:
I know some people like certain page pools so if you wuld like any value, tell me. I will put the fault ones on 16.
Click to expand...
Click to collapse
8megs is my sweet spot, doesn't matter to much though, takes all of 10s to change it
Diamond base is fine
kareem9nba said:
@ galaxys, so you just want a lite rom with the essentials?
Click to expand...
Click to collapse
Exactly...with 2G dialer, netcf 3.5, schaps config v2.1, task manager v3.1, 6mb PP, no splashs...
HOLD up for now...Im looking at some other possible IU & apps!
btw, have u heard of RemoteTracker - Antitheft software and cooked it in any roms? See Post#1 for info "ROM cookers can use this DLL to make RT hard reset safe!" http://forum.xda-developers.com/showthread.php?t=394203
galaxys said:
Exactly...with 2G dialer, netcf 3.5, schaps config v2.1, task manager v3.1, 6mb PP, no splash. thanks
Click to expand...
Click to collapse
Woopss CF3.5 for me as well, im always forgetting something

This thread will tell you which ROM to choose.

HAHA that got your attention huh?
I just thought I'd start a thread for people who might be considering upgrading to Windows Mobile 6.0 or 6.1. You should post why you like a certain rom, which features you like, and what could be better.
Since (and I am pretty sure on this) that all of the builds are based on "chunks" of the OS taken from other phone's distributions, there isn't a "hermes specific" guide to improvements that these newer OSs give the user.
So if you feel like it, post away. Hopefully if anything, this will serve as a basis for which rom to choose.
Please don't spam the thread with posts agreeing with other users. I didn't intend for this thread to be a discussion. Try not to post based off other posts, and please
DON'T QUOTE ANYONE!
This means if someone says "I like schaps because its purple and neat looking", don't post "YA IT SURE IS". Just post AGAIN stating that it is purple, as well as what else you like about it.
Reserved for future use
ROM: CRCs STABLE (v11.2; 17-Jul)
This is a great rom to use. Battery life is excellent, and my phone never hangs / crashes. (hence the stable). I like that it accepts dialer customizations (3G dialer from the kaiser for instance) without making you go through a graphic nightmare trying to get it to work.
I *have* noticed some WIFI issues however... Not being able to connect to networks that I KNOW are open. It will say you are connected, however you won't be able to transfer. This however is only a very rarely encountered issue, and usually at WIFI hotspots in restaurants and hotels. It ALWAYS works on my home network.
Rom seems on par with most when speed is considered. It is not either slow, nor exremely fast. Quick enough to do most any task with less than a 1 second wait.
I would definately recommend this rom for use by anyone who is considering their first upgrade, or anyone who wants a very useable rom with a good basic set of programs and tools.
Thank you for bringing this up
Personally, I would say CRCinAU's roms have been the benchmark for other chefs to 'match' or 'better'
These days abusalza is that chef. Again these are my personal opinion, you really NEED TO FLASH ALL THE ROMS, to find what you like and what you don't.
No one can tell me what I will like and what I won't like, as it is down to preference.
So, in other words, .... this thread is pretty useless
in here is a link to rom benchmarks (great job be veyka) to assist U:
>>>> http://forum.xda-developers.com/showthread.php?t=419158
Why did you post that? tell me, is there anywhere out there where there is a "consumer reports" type of ROM review?
Rom choice is.. very much what you like.
I can tell you from exp, and I have flashed almost every rom here, as im sure many other people can, that its the ONLY way to know what to use.
There isnt a bad rom, just one that isnt right for you.
since joining this community, i have flashed many roms. I have flashed almost every release during that time, it would exceed 100 roms.
now, what i have noticed is that it doesnt matter which rom i chose, i end up putting the applications on it which i like. Some of the roms have these and others do not. so really, find what it is you like, get the cabs for it, and almost all roms are the same.
there is the stability and speed of roms which is different. but with a 400mhz processor, the speed is barely noticeable unless you change the pagepool.
There is one rom that i always return to when i am away for a while, being Berds 4.31 SS
I find there is a huge difference in speed and battery drain between different WM6.1 roms.
I would personally hold up CRC and PDAcorner as the best two out there atm.
(main difference is if you like your rom vanilla or not)
carcomp said:
Why did you post that? tell me, is there anywhere out there where there is a "consumer reports" type of ROM review?
Click to expand...
Click to collapse
Hmm hardly a 'consumer' report, as most of them don't donate, may be you should call it 'free loaders report'
carcomp said:
HAHA that got your attention huh?
I just thought I'd start a thread for people who might be considering upgrading to Windows Mobile 6.0 or 6.1. You should post why you like a certain rom, which features you like, and what could be better.
Since (and I am pretty sure on this) that all of the builds are based on "chunks" of the OS taken from other phone's distributions, there isn't a "hermes specific" guide to improvements that these newer OSs give the user.
Click to expand...
Click to collapse
btw, on that note. WM6 is WM6, whatever device its on, each rom comes with diffrent stuff cooked in..
Same goes for 6.1.
Its also quite easy to tell if the roms your cup of tea from the thread and screenshots, eg, does it look loaded, lite, comes with HTC home ect!
carcomp said:
I like schaps because its purple and neat looking", don't post "YA IT SURE IS
Click to expand...
Click to collapse
I use CRC's with schaps's purple theme I ripped it out.
I reccommend
learning how to cook your own! it's pretty freaking sweet when you can do your own preferences to your rom in the oven and then flash it! I've been flashing wm6 and 6.1 for a while and just started and i'm not going back man!! Flash and learn!! do it! ;0
joshkoss said:
learning how to cook your own! it's pretty freaking sweet when you can do your own preferences to your rom in the oven and then flash it! I've been flashing wm6 and 6.1 for a while and just started and i'm not going back man!! Flash and learn!! do it! ;0
Click to expand...
Click to collapse
Dont suppose you have a link to the tools/guide for cooking WM6.1?
Long winded response (sorry)
veyka said:
Dont suppose you have a link to the tools/guide for cooking WM6.1?
Click to expand...
Click to collapse
well dude,
I hate to send people on wild goose chases.
http://forum.xda-developers.com/showthread.php?t=415198 has a rollup on very useful stuff.
bepe's kitchen is in there download and read the entire thing.
download every hermes kitchen you can find and just start messing with stuff.. RGU's are all registry entries. modify and open xml's to see what they do. and just start poking around, eventually (3 months) you'll get a working almost stable build! Every change you make be sure to note it incase you need to go back and correct.. Also note what you did to fix stuff.
Then when you have questions PM and i'll try and help as much as i can but i'm still new.
Or search and bug the crap out of people. at least thats how i did it.
Also the Hypercore kitchen has a good manual with it.. On porting, the noob way for porting is easyportoven, otherwise search xip and sys porting and there is a nice thread on it..
The rest is just trial and error.
joshkoss said:
well dude,
I hate to send people on wild goose chases.
http://forum.xda-developers.com/showthread.php?t=415198 has a rollup on very useful stuff.
bepe's kitchen is in there download and read the entire thing.
download every hermes kitchen you can find and just start messing with stuff.. RGU's are all registry entries. modify and open xml's to see what they do. and just start poking around, eventually (3 months) you'll get a working almost stable build! Every change you make be sure to note it incase you need to go back and correct.. Also note what you did to fix stuff.
Then when you have questions PM and i'll try and help as much as i can but i'm still new.
Or search and bug the crap out of people. at least thats how i did it.
Also the Hypercore kitchen has a good manual with it.. On porting, the noob way for porting is easyportoven, otherwise search xip and sys porting and there is a nice thread on it..
The rest is just trial and error.
Click to expand...
Click to collapse
Thanks a lot! learning to cook is something I want to get into when I have done all my uni work
veyka said:
Thanks a lot! learning to cook is something I want to get into when I have done all my uni work
Click to expand...
Click to collapse
well sir, i'll be as much of a help that i can be.
Best regards,
noob chef!
veyka said:
I use CRC's with schaps's purple theme I ripped it out.
Click to expand...
Click to collapse
Don't suppose you can zip that TSK file up and put it up here? only a tiny one am sure.
zocster said:
Don't suppose you can zip that TSK file up and put it up here? only a tiny one am sure.
Click to expand...
Click to collapse
Here you go
veyka said:
Here you go
Click to expand...
Click to collapse
thank you sir.
zocster said:
thank you sir.
Click to expand...
Click to collapse
More than welcome

WM6.5 Clean and uncustomized? Is it available?

I've been looking for new rom to suite my diamond.
I want 6.5 cause of the improved behavior of scrolling and since its a little more fingerfriendly in the menus.
The issue is that every rom is so tweaked that after 5Mins I get memory usage of 90%!
Therefore I'd like to find a basic WM6.5 that hasnt been touched and tweaked,
So I can use it with my own software customizations and thats all.
I dont like the tweaks so much since it kills the memory and cause problems to softwares like IGO and Opera which needs a bit more memory.
Thanks!
looking for same here..
I have responded to both of you guys privately on a recommended ROM so as that we don't offend other chefs here.
band27 said:
I have responded to both of you guys privately on a recommended ROM so as that we don't offend other chefs here.
Click to expand...
Click to collapse
This is probably going to be the first of many "Me too!" threads, and I hate to do that, but...I am interested in the same thing, so...
Me too, please...
Thanks--
Jeremy B.
Don't Panic said:
This is probably going to be the first of many "Me too!" threads, and I hate to do that, but...I am interested in the same thing, so...
Me too, please...
Thanks--
Jeremy B.
Click to expand...
Click to collapse
I've PMed you, take a look and enjoy!
What I have recommended is a Rom that has been customized but it consumes very little memory and it's fast and stable.
Please can I have link. Thanks
band27 said:
I have responded to both of you guys privately on a recommended ROM so as that we don't offend other chefs here.
Click to expand...
Click to collapse
Heh. Well, your sig just gave you away.
im sorry to ruin all the party but ive tried the rom you reccomended, and it aint such a memory saver too!
I had it yesterday, this rom is *loaded* with tweaks.
maybe there's something else?
i've never noticed big differences with or without all the tweaks, ever "official" just with tf3d2 is fine for me
Use lobsterdave's easy to follow kitchen and cook your own.
Much easier and you won't have anything you don't need.
as the post above states
make it yourself....that way you get what you want...and not what a chef thinks you want.
i'd like to cook one myself but I couldnt find a basic rom with the latest wm6.5
eranyanay said:
im sorry to ruin all the party but ive tried the rom you reccomended, and it aint such a memory saver too!
I had it yesterday, this rom is *loaded* with tweaks.
maybe there's something else?
i've never noticed big differences with or without all the tweaks, ever "official" just with tf3d2 is fine for me
Click to expand...
Click to collapse
Im sure you're well aware that both WM6.5 and the tf3d2 (for diamond anyway) are both in beta/experimental stages (Hence, there is no such thing as 'official 6.5' atm), and that even if you don't tweak them they are bound to have memory leaks? (tf3d was a memory hogger for 6.1 btw INMHO) Just the fact that you found no 6.5 rom to suit your needs of more free ram, is already a clue dude.
eranyanay said:
i'd like to cook one myself but I couldnt find a basic rom with the latest wm6.5
Click to expand...
Click to collapse
I think you're misunderstanding.
You don't need a base ROM. It's all included in the kitchen along with all the packages. You can of course create your own packages and add what you want to the kitchen.
Then after you've selected what you want in your kitchen and what you don't want you can cook it into a ROM. Before you cook you don't have a base ROM, you have a whole load of files in their raw format ready for packaging into the ROM.
As I said, use lobsterdave's kitchen which is exceptionally easy to follow and has instructions.
Where can i get lobsterdave's kitchen?
I googled it and it gave me this : http://www.google.co.in/search?hl=e...0vJ&q=lobsterdave's+kitchen&btnG=Search&meta=
Can some provide a link?
donsalari said:
Where can i get lobsterdave's kitchen?
I googled it and it gave me this : http://www.google.co.in/search?hl=e...0vJ&q=lobsterdave's+kitchen&btnG=Search&meta=
Can some provide a link?
Click to expand...
Click to collapse
Here you go...
http://forum.xda-developers.com/showthread.php?t=513311
Can you PM for clean WM 6.5 ROM?I'd like get one as well...
JeganathanK said:
Here you go...
http://forum.xda-developers.com/showthread.php?t=513311
Click to expand...
Click to collapse
God bless you!!

Categories

Resources