i have to write this thread to let people know there's much better shield other than invisible shield after a good experience of mine.
it was so sick that i had to wait for their response of replacement from zagg, and it just got me so much stress, so i had searched over the web to find another one for my x1.
and i found this shield called SGP shield, and i must say this is hella better, especially the screen protection.
invisible shield uses just same rubber-like film for both screen and body, but they have totally different one for the screen.
it is much thinner, screen is very not-noticable, very clear, sleek, and scratch proof at the same time of course.
and they just have a great customer service, i had a trouble with the order, and i sent them the complain, and they just replied back apologizing within 15min, and corrected the trouble i had, without any hassle.
for those who are not satisfied with rubber-like screen cover, you really shouold try this one.
here's the link: http://www.sgpstore.com/product_info.php/cPath/23_58/products_id/493
hope this thread helps someone who had trouble like me.
ThankS.
-TJ
Thanks Gostop,
Just ordered one (apparently tehre are 2 per pack).
I had an invisishield on my x1 before it went in for repair, so I thought it was easier to order a new one rather than try to put my invisishield back on.
I really need one for my x1...ill wait til buzz gets his to decide, 25 bucks is kinda steep.
i have this one, very clear and smooth protector
http://www.manhattan-cellular.com/srt/mca_en/bp/viewproduct?langue=en&modsel=5925&prodid=3363
local shops sell these for about 10 euro
Post some photos if you can guys.
Thanks
strboy said:
I really need one for my x1...ill wait til buzz gets his to decide, 25 bucks is kinda steep.
Click to expand...
Click to collapse
Got mine on Friday. Very quick postage to Australia.
I have only put on the screen protector so far, but from first impressions it seems to be far superior to my old invisishield.
The screen protector is made from a harder material and doesn't feel sticky to touch (like the invisishield). I actually prefer the feel of my screen with this on than without any screen protector.
I will post some pics after I get the rest of the shield on. Probably not until the end of the week.
sweet, was planning on invisible shield but ill try this
Can anyone tell me if the screen protector part covers the whole screen as I've bought a SPUC one and there was a 2mm gap on the sides.
Thanks
What about the actual body shield? Is it as crappy as invisible shield, cause invisible shield was not made well at all for it, for example on the bezel, on the corners and the back side????
ordering it now, hope it meets my expectations
thanks man
I have just got mine and i must say it´s geat, easy instalation and great covering (incluidng corners and whole back part). Great grip sensation, not sticky and the screen protector is very smooth to the touch and it fits perfect the sreen without leaving gaps between the protector and the screen ends. And the packages comes with two set in case you screw it the first time.
Hope it helps.
I sticked it in my X1..
Thanks topic owner, SGP is the best one I used. At first, I put InvisibleShield, but when I use with finger, my nail scratched the shield, but no scratches at all on SGP.
any one got any pic of this on the xperia?
i just recieved mines and applied it. the screen fits on easily and perfectly, there aren't any gaps after applying the shield so you wont have to worry about any loose gaps. the body was a bit hard for me to put on because the pieces didn't fit perfectly. there's a bunch of gaps after applying the body and there wasn't a piece to protect the camera on the back from getting scratched. overall i like this shield because it gave me what i wanted, screen protector and some grip.
notjoker said:
i just recieved mines and applied it. the screen fits on easily and perfectly, there aren't any gaps after applying the shield so you wont have to worry about any loose gaps. the body was a bit hard for me to put on because the pieces didn't fit perfectly. there's a bunch of gaps after applying the body and there wasn't a piece to protect the camera on the back from getting scratched. overall i like this shield because it gave me what i wanted, screen protector and some grip.
Click to expand...
Click to collapse
could u pls upload a pic..thanks
im sorry but is everyone speaking up for SGP shield or the other site the manhattan thingy?
okay i've been using the shield for the body for a while now and its starting to peel
i've already took off the front frame and i might take the rest off besides the back for the grip
It would be good if someone uploads a picuture. How does it fit at the bottom (where the microphone and xpanel key is). That place seems to be a very narrow surface to stick the sheild on.
Related
I've used many different kinds of screen protectors in the past, and this time I tried XtremeGuard which I found on eBay. The cost was only $2.50 shipped. I must say hands down, this is the best screen protector I have used.
Other kinds I've used in the past were a thin hard plastic, kind of like a clear overhead sheet, but thinner and sticky on one side. These were not good IMO, because they make the touchscreens less sensitive and since they were hard, the edges would start to peel first and it would be all downhill from there.
The XtremeGuard is a more stretchy film material, kind of like 3M clear bra, or the kind you would find on a car. Its got a nice grippy rubber feel to it, which I actually like. Its "softer" so it sticks better to the screen.
I used a mild soapy water solution to put it on, and at first was kind of concerned with my results. Some areas were cloudy, there were some visible bubbles and when the screen was on it looked all rainbow cuz of the water trapped inside. After a couple days though, all the moisture evaporated, the cloudiness cleared up and all the bubbles were gone. I was left with a perfectly crystal clear screen that adhered all the way around, even on the edges. You would not be able to tell there was a screen protector on here (I have the OEM HTC silicone skin that covers the edges as well so you can't see the edge of the screen protector). The touchscreen works perfectly, and the screen protector does not interfere at all.
The screen protector was the exact size of the screen, perfect cut. Which is good, but makes it challenging to install, if you're off by a tiny bit, the screen protector will stick off the screen and that will be prone to peeling up later on. So take your time during the install to ensure its on there straight and perfectly. I started from the top where the speaker is and lined it up around those lines, and used a credit card to press it down and get as many bubbles out as I could. If this is your first time installing a screen protector, I would suggest getting 2-3 to make sure you get it right. At only $2.50ea, you really can't go wrong here. I'm 100% satisfied.
http://cgi.ebay.com/NEW-XtremeGUARD...ewItem&pt=PDA_Accessories&hash=item35a9e73eed
I would also like to note that I do not work for, or am in any way affiliated with XtremeGuard at all. I simply tried their product, and I liked it, so I'm leaving my feedback here.
I have tried it, but it is like a mm to long on top to bottom. And it was like 2mm to short in width.
That was my experience. Could be wrong for everyone.
I like mine, it fits perfectly. Doesn't stick over the edge and covers the whole thing. Mine was a perfect fit, not too long or short on any sides.
I'll try to get some pics up later when I get the chance
Man, I want to order it so bad, but with Otterbox covers around the corner, I think its a little waste of money.. :S
Any tackiness or stickiness with this protector? I'm currently using Phatom Skinz and love it, but I'm always looking around for something that may potentially be even better...especially with a price like this. How about orange peel?
thanks,
Alan
There is a very slight tackiness with this screen protector, but I actually like it. It gives a good feel when typing. It might interfere with pong or some other games where you need to move your finger really fast, but that doesn't really apply to me.
No orange peel, or any peeling at all for that matter.
The cloudiness really bugs me. The Zagg I had did not cloud like this one does.
The item from ebay is too pricier. This site offers products with much lower price and free shipping world wide. The 3 packed screen protector is much cheaper than 1 packed from ebay.
http://www.geartaker.com/product/3x...opers&utm_medium=minqing&utm_campaign=FA0070B
this 3 packed protector was once sold at $0.01 during its 2nd super deal.
Hey guys, I recently bought one of these off Amazon when I ordered my Otterbox case, it was only $2 so I figured I had nothing to lose. Here's my take on it.
http://forum.xda-developers.com/showthread.php?p=19109961#post19109961
I was trying to find screen protector for HTC aria and all i found is from ebay. Zagg invisible shield dont even have it yet
On the zagging you could order the hd mini and cut for the optical
being a user of zagg on previous phones i can't imagine it playing very nice with a touchscreen.
Screen + Protector?
Try Amazon.com the screen protector product is made by Amzer for the HTC Aria.
I am a new user so I can't post the link.
I just purchased the screen protector from AT&T and the edges on all 4 corners protrude ... when I put the back case back on it pushed each corner up.
Has anyone else had problems with the AT&T protectors?
jnjames2 said:
Try Amazon.com the screen protector product is made by Amzer for the HTC Aria.
I am a new user so I can't post the link.
Click to expand...
Click to collapse
Keep in mind that the Amzer protectors don't ship until 7/13 (according to their website).
Me? I'll probably go the HD Mini protector + hole punch DIY route that others are suggesting. Too many opportunities to scuff up my screen with kids in the house.
Regards,
Corporate Dog
I have the same problem with the screen protectors I got when I bought my Aria. I will apply another one tomorrow and cut the edges before I apply.
Zagg are great for touch screen
I have been using Zagg's stuff on my old iPhone and my wife's iPhone and they worked great. I actually prefer the feel with the invisible shield applied. I am bummed that they don't have one that is designed for the Aria yet. Anyone actually tried the HD mini one with success?
I got the Amzer® Rubberized Black Snap On Crystal Hard Case for HTC Aria. It doesn't ship 'till 7/13, but that's only 2 weeks, so I can live with that. I got this case because it's like a soft/hard case, and I think that will work better than an all-hard or an all-soft case. Then I got a Gadget Guard screen protector. I was originally going to get an Amzer screen protector, but I read reviews saying Amzer's screen protectors are really bad. Hopefully, their cases will be okay. This is the only company so far I've seen that are making cases for HTC Aria. I didn't know what AT&T had because I bought mine at Best Buy. Btw, from Best Buy, you don't need to do the rebates, because they already include it in their price.
as for the screen protector i got a package of 4 universal screen protectors
from there I took a hole punch to make a whole for the optical button then applied the screen protector to the phone without the case and trimmed it with a razor blade.
http://phantomskinz.com/htcaria.aspx . They have for the front or the back.
kudvu002 said:
http://phantomskinz.com/htcaria.aspx . They have for the front or the back.
Click to expand...
Click to collapse
And if you use the following coupon code (I'm not sure for how much longer; one assumes until the end of summer) you get 30% off your order:
summersale2010
I picked up the screen-only skin for $6.96, with free shipping!
Regards,
Corporate Dog
Zagg has one up on their site now. Just ordered mine.
Figure it's time to star contributing /something/ here, instead of just lurking.
zagg is now selling screen protector, or full body protectors
Edit... aww eff someone beat me to it... same reasoning as well.... sigh... haha
Has anyone ever used the Phantom Skinz?
I briefly tried a Zagg Invisible Shield (invisible my ass) on my previous phone and it made the screen noticeably less clear and it was very hard to clean pocket lint off of it because it was so grippy.
gtg465x said:
Has anyone ever used the Phantom Skinz?
I briefly tried a Zagg Invisible Shield (invisible my ass) on my previous phone and it made the screen noticeably less clear and it was very hard to clean pocket lint off of it because it was so grippy.
Click to expand...
Click to collapse
I used to use them on all my blackberrys. You just dip them in water and apply it to your device. To me they all look the same, I would say that phantom is not as thick as zagg but performs just as well.
Does anyone have feedback on the zagg cover for the back of the aria? I am surprised that they even make it since its got a rubberized type coating. The screen protector is a must do, but the back I cant see for the aria.
Of course they come out with the specific cover days after I buy a different one and cut to fit. Dohhhhhhhhh!
Another thumbs up for Phantomskins. Easy ordering, fast shipping, easy installation.
For the first 24hrs or so, (Dry-ish california weather) the screen touch sensation is a bit grippy, but after a day or so it becomes slick again.
I ordered front only as I see no need to protect the back, and if there is a very nice case one day I will get that anyway. My immediate problem was protecting the glass front. So I ordered just the front skin, which covers the entire phone front as shown on the phantomskin website.
After drying, viewed at an angle the surface appears wavy but viewed straight on it is perfectly invisible. Skin fits aria perfectly.
kudvu002 said:
I used to use them on all my blackberrys. You just dip them in water and apply it to your device. To me they all look the same, I would say that phantom is not as thick as zagg but performs just as well.
Click to expand...
Click to collapse
Corporate Dog said:
And if you use the following coupon code (I'm not sure for how much longer; one assumes until the end of summer) you get 30% off your order:
summersale2010
I picked up the screen-only skin for $6.96, with free shipping!
Regards,
Corporate Dog
Click to expand...
Click to collapse
In for 2
ordered a full body protector from ghost armor yesterday. will report on how i like it when it gets in.
I should mention, I really dislike cases and most screen protectors in general. When I received my Nexus 5, I wanted to add some protection, however I did not want to put a case as I love the way the phone feels. I ordered one of the cheaper PET film protectors for my friend's N5 and after installing it on his I gave one a try on mine- I could live with it as you could barely see it, but I was not happy with the way it slightly changed the feel of the screen and it was a big fingerprint magnet, so my screen always looked dirty. Someone recommended the TruGlass Screen Protector and while it seemed great, I hesitated on spending $30 on a screen protector as you only get one shot at the perfect install. After much back and forth I finally ordered it. After ordering I got an email that stated there was a delay and it would be about a week and a half before it could ship - the email came with a $10 credit to use on another Cruzerlite product, which was a nice touch.
I received the screen protector a week later, it came with a little kit to assist with install and I used the method of taping the protector to the side of the phone before peeling the film back. The install went perfect and the protector looked and felt great. Only issue was that there was a slight chip on the top left corner. Other than the chip it was everything I wanted - completely clear, it kept finger prints away and it did not change the responsiveness or feeling of the naked screen. I immediately emailed Cruzerlite about the issue and quickly got a response letting me know they would happily send out a replacement free of charge if I could just send a picture of the issue. I received the second screen protect just a few days later (which was impressive given it was sent around the holidays) and it is absolutely perfect. It doesn't go completely to the edge of the device, so it can be used with a case - but it goes far enough to the edge that you do not have to use a case.
Let me know if anyone has any specific questions about the product.
tl;dl Coming from someone that likes "naked" devices, I would highly recommend spending the premium on TruGlass protector. It looks and feel great. Added bonus is Cruzerlite's amazing customer service.
Great to read this. my is on the way to Israel. will take some time i guess...
can u plz post some pics for your device with the screen protector?
fire1ce said:
Great to read this. my is on the way to Israel. will take some time i guess...
can u plz post some pics for your device with the screen protector?
Click to expand...
Click to collapse
Here is a pic of the first one that had the chip, it's dirty but you can see how far to the edges the protector goes. Once cleaned, it looks flawless but it's really the touch that stands out as the best feature - it feels exactly like the naked screen.
kennyo112 said:
Here is a pic of the first one that had the chip, it's dirty but you can see how far to the edges the protector goes. Once cleaned, it looks flawless but it's really the touch that stands out as the best feature - it feels exactly like the naked screen.
Click to expand...
Click to collapse
very nice
joelmic said:
very nice
Click to expand...
Click to collapse
Such a great product. I just noticed they are available for the GS4 as well, I am going to have to pick one up for my wife's phone.
Ok so I got my hands on Cruzerlite TruGlass Screen Protector. First off I had sworn off glass screen protectors because of a past experience. But I thought what hell let's see what their protectors are all about. The price is very good compared to a lot of the competition first off. The screen protector is Lab tested nano-glass, Oleophobic coated, has a Anti-shatter film, has a 9H hardness rating and 0.25 MM thick. I applied the protector using the hinge method and it was a perfect apply. It seemed to just suction to the screen and all bubbles just ran out. Every corner stuck perfect which was my main issue with my previous glass screen protector that scared me away from these (was another brand). I honestly think the glass feels so much better than the screen of the nexus 5 itself. My finger just glides across the screen now and the glass is Crystal clear. It works well with every case I've tried which is a huge plus for those of us that use cases. Another thing I noticed is how easy it is to clean the screen. I've now had it on for over two weeks and everything looks like the day I applied it. I highly recommend these screen protectors and if I ever need to get another screen protector for my n5 it I'll be getting another one of these.
http://www.cruzerlite.com/screen-protectors/truglass-flexible-glass-nexus-5
Ok on to my pics
>^.^< Sent From Meow G2
So since this phone is so inexpensive, are we going to get screen protectors for it? Or just let it go? I'm probably going to get something simple, like this one, just for some basic protection. Is anyone else planning on getting any sort of protection?
Thanks in advance!
I bougth one and after 2 weeks is scratched and has a crack so you should no spend your money on this
Yeah, the tempered glass screen protector is pretty good.
i usually just let it go, feel better than cover any protectors
Hi:
I depends on how do you use you screen.
I have own a Galaxy S, SIII and now this Moto E 2015 , and never ever used a screen protector. No scratches on screen. Nevertheless I know some people using the phone as a kitchen cutting table and have the same results (as the kitchen table).
Gorilla glass is pretty hard though.
I actually have screen protectors on my devices just so because it feels good to know there's an added protection. You may want to check this one.
The Tempered film is a better choice.
Where i live in Canada i could not find one in store.
I was able to see a couple cases but they were super cheaply made and super expensive (in my Mall)
So i didn't buy a case.. i also didn't want a bulky case because i lucked out and found a sweet belt clip case at Wallmart.
The case from Wallmart fits my dimensions perfectly for the phone and has my phone attached to my belt now
I like using my phone to listen to music while i ride my mountain bike.
So what i ended up doing is getting an iPhone 6 protective film for $2 and i just trimmed the top off and laid it on top my phone.
i have 95% of it covered and it looks ok.. i had done a better job but i tried to make it perfect and screwed it up.
Pro Tip: Don't be a perfectionist when making your own cut and paste protective film LOL
Also..
I could have gotten a protective film from a kiosk in my local Mall that is suppose to be strong etc.
The kiosk custom cuts the protective material for any device from watches to phones, so i *could have done that.
But, they wanted about $35 can. after taxes for my cheap phone so i said no thanks.
I do want to ask any of you out there a question (i am fairly new to android phones only had a S3 for a few months before)
What i want to know is are the Gorilla glass screen good enough that i can just ditch the plastic film stuff ?
Like i have seen some guys say online that they don't bother putting a protective skin on the phone.
So what do you guys think ? Maybe i should ditch the protective plastic stuff on my phone ?
xpmule said:
I do want to ask any of you out there a question (i am fairly new to android phones only had a S3 for a few months before)
What i want to know is are the Gorilla glass screen good enough that i can just ditch the plastic film stuff ?
Like i have seen some guys say online that they don't bother putting a protective skin on the phone.
So what do you guys think ? Maybe i should ditch the protective plastic stuff on my phone ?
Click to expand...
Click to collapse
gorilla glass is preatty hard, it can survive some hard things like keys or somethig made of metal but there are things that can easy scrach it - for example sand (because it's harder than glass). I can't recommend plastic screen protectors, they do the job but they are real fingerprints magnets. It's impossible to keep it clean. I think you should buy glass protector, you can find cheap ones on some chineese sites with free shipping (it takes like month but I think it's worth)
Today I got my 3$ tempered screen protector form Chinese auction site. The shipping was free, it should take more than 30 days according to info on the site but I've waited only 12 days. IMO the glass quality is very good but it's my first tempered glass protector. Instalation process was easy (even without instruction on the box but there is a lot of videos on YouTube about instalation) though I have small air bubble around proximity sensor. It's my first glass so maybe I've done something wrong. Anyway I'm very happy, I had plastic foil before and it's like day and night. The fell of the glass under the finger is great. IMO this 3$ glass is a great deal.
I bought my one here http://www.aliexpress.com/item/2-5D..._77_91_80,searchweb201644_5,searchweb201560_9
Edit
Today that bubble dissapered for itself, now it sticks perfectly. For 3$ I'm more than happy.
Just go get one from XtremeGuard and use a coupon to bring the price down to like $2.
tyvm got all the info i need here
JuanAG said:
I bougth one and after 2 weeks is scratched and has a crack so you should no spend your money on this
Click to expand...
Click to collapse
i agree i got it and got it replaced free both times it cracked under a month i wont ever buy it again
I bought a screen protector from amazon called Mr. Shield and it works just fine, no bubbles, no fingerprints on the protector.
Titantech2015 said:
i agree i got it and got it replaced free both times it cracked under a month i wont ever buy it again
Click to expand...
Click to collapse
What are you doing with your phones? I have the cheapest Chinese glass protector since November and it's still like new.
eonarma said:
I bought a screen protector from amazon called Mr. Shield and it works just fine, no bubbles, no fingerprints on the protector.
Click to expand...
Click to collapse
I had something like that on my last phone and it got really scratched after 1 week, mostly from this metal things around pocket in jeans pants. It made screen look grainy too but it was pretty comfortable to use in sunlight.
iks8 said:
What are you doing with your phones? I have the cheapest Chinese glass protector since November and it's still like new.
I had something like that on my last phone and it got really scratched after 1 week, mostly from this metal things around pocket in jeans pants. It made screen look grainy too but it was pretty comfortable to use in sunlight.
Click to expand...
Click to collapse
Ahhh I see, well you could get a case that covers the screen, that way it doesn't get grainy or scratched. Regardless of the screen or screen protector, I think it's not recommended to place your phone on the same pocket you have your keys in, or other metal things.
eonarma said:
Ahhh I see, well you could get a case that covers the screen, that way it doesn't get grainy or scratched. Regardless of the screen or screen protector, I think it's not recommended to place your phone on the same pocket you have your keys in, or other metal things.
Click to expand...
Click to collapse
I think about those two metal spots around pocket in most of jeans' pockets. I just want to say that it won't suit for every people, I used something like that and I was really mad about how it made my screen grainy and how soft it was although it performed preatty good in sunlight and fingerprints wasn't so visible. Then I had non matte one, screen looked better but it was real fingerprints magnet. It was harder but still It got scratched after some time. Now I have glass and for me it's the best choice. It's very transparent, very hard and it's not so bad with fingerprints but it's thick so it can colide with some cases (not an issue for me). That's just my opinion about thoose protectors.
iks8 said:
I think about those two metal spots around pocket in most of jeans' pockets. I just want to say that it won't suit for every people, I used something like that and I was really mad about how it made my screen grainy and how soft it was although it performed preatty good in sunlight and fingerprints wasn't so visible. Then I had non matte one, screen looked better but it was real fingerprints magnet. It was harder but still It got scratched after some time. Now I have glass and for me it's the best choice. It's very transparent, very hard and it's not so bad with fingerprints but it's thick so it can colide with some cases (not an issue for me). That's just my opinion about thoose protectors.
Click to expand...
Click to collapse
A glass screen protector? Sounds interesting I've never used one before. Sounds interesting, how's he's your experience been with it?
eonarma said:
A glass screen protector? Sounds interesting I've never used one before. Sounds interesting, how's he's your experience been with it?
Click to expand...
Click to collapse
Well I bought mine for 2$ on chinese site (aliexpress). It's cheap, preatty easy to install, very scratch resistant and very clear, screen looks bright and it feels great under the finger. The downsides are that it's thick so it won't work well with every case, I use it with orginal grip shell and it's good combo because of the case design: http://forum.android.com.pl/uploads/monthly_12_2015/post-142525-0-25574200-1451048167.jpg The second problem is that the oleophobic coating wears off but after 2-3 months it's still not so bad (but it was better when it was new).
iks8 said:
Well I bought mine for 2$ on chinese site (aliexpress). It's cheap, preatty easy to install, very scratch resistant and very clear, screen looks bright and it feels great under the finger. The downsides are that it's thick so it won't work well with every case, I use it with orginal grip shell and it's good combo because of the case design: http://forum.android.com.pl/uploads/monthly_12_2015/post-142525-0-25574200-1451048167.jpg The second problem is that the oleophobic coating wears off but after 2-3 months it's still not so bad (but it was better when it was new).
Click to expand...
Click to collapse
Awsome, I'll try one someday, the plastic one I have feels to smooth on the finger, as in it sometimes feel like if you are not really sliding your finger on the surface
Has anyone tried this Spigen screen protector? I just saw this listed on Amazon, I think it is a new product from them.
Yes I have, I have just recently purchased it from Amazon I put it on and it came off within 2 hours. The Protector itself is excellent It's a shame it wouldn't stay on. The box it comes with is quite impressive to made out of cardboard and foam almost looks like a book. I'm afraid the sides in the top are just sticky like an adhesive. It's a better adhesive and it doesn't show on the screen however he doesn't stick very well. It was case friendly for the 2 hours that I had it. I just wish there was some type of way to make it stay on.
generalkipper said:
Yes I have, I have just recently purchased it from Amazon I put it on and it came off within 2 hours. The Protector itself is excellent It's a shame it wouldn't stay on. The box it comes with is quite impressive to made out of cardboard and foam almost looks like a book. I'm afraid the sides in the top are just sticky like an adhesive. It's a better adhesive and it doesn't show on the screen however he doesn't stick very well. It was case friendly for the 2 hours that I had it. I just wish there was some type of way to make it stay on.
Click to expand...
Click to collapse
Thanks for the info I was about to buy it - any other tempered glass one you've tried that works well with a case?
can't believe this is so challenging to find the right product
I tried a few however the adhesive fails after a certain amount of time. If he he's a doesn't fail dust gets under it and just looks awful. I have spigen's film which is really great however it's very gel-like see your fingers will stick to the screen more I didn't like that very much I also tried another film adhesive called or it's from rather armor suit. It worked out very great not as gel-like as the speaking film. Remind sperience I would go with the film this adhesive they're putting on the protectors is not doing well whatsoever even if the price range of them are six to $12 it is a waste of money. I have nothing on my screen right now whatever small scratches I get I've come to accept because it's just nothing great out there. I can't imagine how much money people have spent on protectors for this particular phone it's very sad. In any case go with a film.