US Cellular HTC 6800 troubles. - Upgrading, Modifying and Unlocking

Hello all I am new to this forum but I hope I can find the answers to my problems here. First off I have looked all over the site for NFO to a solution, but I only found bits and pieces, or information that was a little over my head.
This is my problem: I have a an HTC 6800 through US Cellular, I want to upgrade Windows Mobile to the most current version (6.1) I believe, but HTC does not have the upgrade for the USCC version of this phone on their site, and USCC will give me no tangible information either. Plus I would like to enable the GPS. Are there any step by step, easy to follow articles on doing both of these upgrades? Remember I am new to this so the easier to follow the better. Thank you all for any assistance on this and for providing this wonderful forum.

The Titan section of the forums will be where you want to go.
I used this guide (http://forum.ppcgeeks.com/showthread.php?t=24511) to upgrade mine.
Beginners guide for the Titan - http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
The XDA Titan wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Some other useful info I've compiled: http://sites.google.com/site/victorbush/htc-6800-1
Hope this points you in the right direction!

The directions say to use Titan_No2Chem_5060_WM6.1. Where do I get this and how do I use it in BuildOS?

Actually using the builds that came with BuildOS (like WM6.1 20931) worked for me.
If you're interested ftp://up.ppcgeeks.com/Titan/Users/No2Chem/ has No2Chem's stuff. The kitchen RARs are in the Basekit folder. You'll put that in the BuildOS\Kitchens folder. You'll also want to extract the selections text file from the basekit rar and put it in the projects folder. You may have to tinker with the selections file a bit to get it working properly.
Here's the first 7 lines of the no2chem selections file i used for 5060 (i didn't try any others):
SelectionsVersion=.90.04
KitchenDir=Kitchens\basekit 5060.rar:
ModuleDir=Kitchens\PPCkitchen_OEM.rar:
ModuleDir=Kitchens\PPCkitchen_OEM_VGA.rar:
ModuleDir=Kitchens\PPCkitchen_Addition.rar:
ModuleDir=Kitchens\Generic_OEM.rar:
ModuleDir=USER_OEM
Click to expand...
Click to collapse

Again I thank you vicbush. When I installed BuildOS and then patched it, the first time I opened it it gave me no options in the new project screen, after I updated it again then it gave me some options but none of the ones you have shown me. So I am reinstalling BuildOS and I will let you know if that helps.

Vicbush, I thank you. With all your help and your tutorials on changing carrier name and getting data back up, I am now the proud owner of a USCC HTC 6800 running WM6.1. Again thank you so very much.

Related

OK, I'm lost.

Hey guys,
I swear I must be retarded or something.
Been looking to upgrade to WM6 for a while now, and decided to throw on Black V2.5.
But, I'm also seeing further things such as radio, bootloader, HardSPL etc.
Are these necessary?
If someone can basically add me on MSN and talk me through it, if it's not too tricky, that'd be awesome...
If not, then I'm guessing, I can hook the phone to my PC, flash Black on to it, then copy over the .cab files and run them from the device?
S**t the bed...
read the wiki
WIKI
Follow the guide:-
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
could some one give me a few pointers on loading a (cab ) file or a link explaining it please
SkyyBoy said:
read the wiki
Click to expand...
Click to collapse
Ahhhhhhhh, the wiki...I thought when people said that they were referring to Wikipedia.
Apologies, it's been a long morning.
ntae said:
could some one give me a few pointers on loading a (cab ) file or a link explaining it please
Click to expand...
Click to collapse
Firstly, welcome to the Forum
1-Sync your mobile with your PC
2-(Assuming the Cab File is on your PC). Drag this file to a folder on your mobile, eg /Program Files.
3-Using File Explorer, from your mobile, locate this file and run it on your mobile. This will auto install the file.
Secondly, you must Read the WIKI before you decide to install any ROM. This will eliminate the need to ask questions that have already been covered on the subject. MR VANX has written an excellent guide on upgrading your ROM, see last post above your request, and the guide is regularly updated. (thanks for all your good work MR VANX).
I am also fairly new to upgrading and extensively read the guide and followed all instructions. I have now successfully uploaded many ROM's. (Many thanks to all the CHEFS for their dedication and commitment, please keep the ROM's coming).
Good Luck.
d1archie said:
Firstly, welcome to the Forum
1-Sync your mobile with your PC
2-(Assuming the Cab File is on your PC). Drag this file to a folder on your mobile, eg /Program Files.
3-Using File Explorer, from your mobile, locate this file and run it on your mobile. This will auto install the file.
Secondly, you must Read the WIKI before you decide to install any ROM. This will eliminate the need to ask questions that have already been covered on the subject. MR VANX has written an excellent guide on upgrading your ROM, see last post above your request, and the guide is regularly updated. (thanks for all your good work MR VANX).
I am also fairly new to upgrading and extensively read the guide and followed all instructions. I have now successfully uploaded many ROM's. (Many thanks to all the CHEFS for their dedication and commitment, please keep the ROM's coming).
Good Luck.
Click to expand...
Click to collapse
Thanks i will spend some time reading more the WIKI , i got the cabs loaded just ran out of room for them all
Hi, welcome to the forum.
Appreciate you ran out of room for all of your cabs, this forum does contain a lot of very useful things,(Thanks Chefs), & if you think you are going to need some again & again, put the most useful cabs on your storage card & then install them to your device. (just in case you keep flashing, as it becomes addictive)
Sorry, already answered

US Cellular Roms?

Does anyone know of any custom roms for US Cellular?
I have not seen any on here, at ppcgeeks.com, or ppchaven.com.
One of the other two site may be able to help you as they are more geared towards CDMA devices.
You are in luck!
http://forum.ppcgeeks.com/showthread.php?t=53675
you should be able to flash a custom rom that is not particular to US cellular.
For instance, I'm on sprint, I have a bell radio and a custom bell rom, running no problem.
noob - so noob that I just popped out 3 weeks ago. How exactly (as in step by step) do I flash a rom. I have been looking and searching and googling but to no avail of instructions.
I have seen I need to unlock my phone (codes like ##3242# do not work on my USCC HTC Touch (which shows as a vogu100 on the system screen) and QPST does not even see my phone - but I do not know how to use that either.
I saw that I should use Coke 2.3 (or something like that) from ImCokeman on PPCGeeks (probably here too.
Again where do I get step-by step (in a how-to for complete imbiciles). Could anyone help me here?
All I realy want to do is turn on my GPS and possibly the wifi as my users manual says it has it and there should be a button for it in comm manager but it is also missing.
Any help would be greatly appreciated.
Kevin M Carman
Maine Notary Net
Bangor, Maine (in the boonies)
mainenotarynet said:
noob - so noob that I just popped out 3 weeks ago. How exactly (as in step by step) do I flash a rom. I have been looking and searching and googling but to no avail of instructions.
I have seen I need to unlock my phone (codes like ##3242# do not work on my USCC HTC Touch (which shows as a vogu100 on the system screen) and QPST does not even see my phone - but I do not know how to use that either.
I saw that I should use Coke 2.3 (or something like that) from ImCokeman on PPCGeeks (probably here too.
Again where do I get step-by step (in a how-to for complete imbiciles). Could anyone help me here?
All I realy want to do is turn on my GPS and possibly the wifi as my users manual says it has it and there should be a button for it in comm manager but it is also missing.
Any help would be greatly appreciated.
Kevin M Carman
Maine Notary Net
Bangor, Maine (in the boonies)
Click to expand...
Click to collapse
What ROM & Radio do you currently have? I asume that since you posted on this thread that you are on US Cell?
UNLOCKING
http://forum.ppcgeeks.com/showthread.php?t=20370
You will have to use WINRAR to extract the files to a folder. Connect your phone to your computer with activesync (xp) or WMDC (Vista) to establish a connection. You just need to run the ROMUpdateUtility.exe & follow the instruction.
FLASHING
Once you have unlocked you phone download what ever ROM you want & extract the files to a folder using winrar. Establish a connecrtion & run the ROMUpdateUtility.exe. Then follow the instructions.
You can also flash from the bootloader screan power+camera+reset. If flashing a stock ROM then copy the VOGUIMG.nbh onto your micro sd card. Tehn enter the bootloader screen power+camera+reset. You ROM should start flashing automatically. If you want to us a custom ROM you will follow the same process but you will have to remname the nbh file. It will be named RUU_Signed.nbh & you will need to rename it to VOGUIMG.nbh after copying it to you micro sd card.
Look at this page.
http://www.atwistedweb.com/xv6900/index.html
Carrier is US Cellular (nice instructions -- for verizon - can't chance a se of instructions that brick my phone)
System info shows:
ROM version: 3.01.573.4
ROM date: 10/10/08
Radio Version: 3.42.3
Protocol Version: DCAAXAM-4350H
Hardware version: 0001
PRL Version: 15068
PRI version: 1.32.027
Browser Version: MSIE 6.0
Bootloader shows:
Vogu100
SPL-2.01.0000
cpld-3
I have come across the unlocking thread 13 different times but it is not specific to USCC it even says it. This is for a CDMA device, the HTC vogue aka SPRINT touch (not elf) - if it bricks my phone I am s.o.l. as they rund $500+ retail and I aint got it lying around.
Oh well - maybe I am just paranoid but I need my phone and can't take a chance that my phone becomes a paperweight just for one added feature especially when it does have an option for external GPS and those I can get for 30-50 dollars.
I wish I had more confidence in myself but well...
Thank You.
Update: Unlocked and flashed the ROM in this tread for USCC and still my GPS don't work -- this is the one thing I wanted. No help
Dette makes a really nice fully loaded ROM, fast and smooth, not really my taste mainly because I like to keep all my apps up to date and when they're cooked in you cant. I like a nice clean ROM that I can customize myself, But Dettes is awsome if you just wanna "flash and go", plus your pretty limited on your choices because of your carrier
http://forum.ppcgeeks.com/showthread.php?t=34284
yearn said:
Dette makes a really nice fully loaded ROM, fast and smooth, not really my taste mainly because I like to keep all my apps up to date and when they're cooked in you cant. I like a nice clean ROM that I can customize myself, But Dettes is awsome if you just wanna "flash and go", plus your pretty limited on your choices because of your carrier
http://forum.ppcgeeks.com/showthread.php?t=34284
Click to expand...
Click to collapse
This is for Diamond I have Vogue I did the one that was posted at the beginning of this post and although not bricked major changes made that I do not like.
I now have to see if I can find the original USCC stock ROM only thing I need is the GPS - the rom changed my contact, can not change default area code, plays music when not told to, etc.
that's what I get for trying.
No this is for the Vogue, its just the Diamond edition. I flashed it this morming to my Alltel touch. I assume its called that cause its got the M2D which makes it look like the Diamonds TF3D. Trust me
yearn said:
No this is for the Vogue, its just the Diamond edition. I flashed it this morming to my Alltel touch. I assume its called that cause its got the M2D which makes it look like the Diamonds TF3D. Trust me
Click to expand...
Click to collapse
That may be but when my first rom flash (using the one above causes major problems (opera sucks want IE back (rather firefox but)) and I can not change the default area code anymor. I do not kbnow if I want to try again -- I think I can find my stock USCC rom at HTC site. Iall I wanted was a GPS not 17 hours of headaches.
mainenotarynet said:
That may be but when my first rom flash (using the one above causes major problems (opera sucks want IE back (rather firefox but)) and I can not change the default area code anymor. I do not kbnow if I want to try again -- I think I can find my stock USCC rom at HTC site. Iall I wanted was a GPS not 17 hours of headaches.
Click to expand...
Click to collapse
Sorry man, Ill see if I can help you find it.
Ok found it, hereya go.
http://www.htc.com/us/SupportDownload.aspx?p_id=185&cat=2&dl_id=186
Hi all,
I've been trying to convince NFSFAN to make a US cellular version of his awesome ROM. He said he would do it if there were at least three users interested. So far I just have myself and johnficca interested. Please go to: http://forum.xda-developers.com/showthread.php?t=432487 to view the ROM and ask NFSFAN to make a US Cellular version.
P.S. Please be polite, respectful and grateful in your posts. NFSFAN is busy and does a lot for this and other communities.
I don't understand - I have a US Cellular HTC Touch Pro2 and the GPS and WiFi are both working fine right out of the box. My guess is that you either have them turned off (although I don't remember seeing an option to turn the GPS off), or you have faulty hardware.
slochild said:
I don't understand - I have a US Cellular HTC Touch Pro2 and the GPS and WiFi are both working fine right out of the box. My guess is that you either have them turned off (although I don't remember seeing an option to turn the GPS off), or you have faulty hardware.
Click to expand...
Click to collapse
You are answering in the wrong forum. You have a TP2 and this section is for the HTC Touch (aka Vogue).

NOOB's Kitchen

Hi eveyrone.
Background: I have been playing with the new Manilla from XBMod, but in doing so I have had to change my ROM. Previously was on a DUtty v4 ROM which I loved as it was a simple clean and fast ROM.
Now compared to Dutty's all other so far are Bloated and/or slugish (even before I put the manilla2 on).
Anyway I decided to see what it takes to make my own. I looked into it and found a nice simple basic tutorial with video here: http://forum.xda-developers.com/showthread.php?t=413782
Now this is really basic. I do need to learn a bit but I need some help in finding some information. Little things like how to edit the registry or how to change the boot image. Also need to find all the updated HTC apps, and a list of what HTC apps are available and/or ported.
Before someone tells me to use search or "google is your friend" I know that.
I can find out what each package does before I remove them and such. I can also find out how to do allot of these things too, but if you actually use the search also then you will find nearly everything is based on modifying an already installed ROM and not doing it in the Kitchen.
On top of all this I doubt I am the only person looking for a clean fast ROM so I will be releasing this to everyone. I would appreciate any suggestions for what to include and what registry edits to do. And would really appreciate a master chef coming by and helping a new apprentice chef.
Much appreciated for anyones help. (Remember I havn't asked for others to do it, I am asking for some help to learn it.) Lets just hope I don't burn anything...... .
Nothing?
No one wants a Simple Light Upto date ROM??
Kinda funny isn't it.
If I just waited around and asked who had what and all that, I would be flamed to a crisp and get told to read and use search. Just so you know I just used search for "OEM HTC" and got NOTHING.
I have been using the forums for about 6 months now and now I have decided to put my little bit of effort in, no one is interested in helping...
I always say that I only help those whom help themselves. I have and am currently helping myself, but I do need a little hand mainly to point me in the right direction.
Anyone?
Doesn't anyone want a simple ROM that is mearly a set of performance tweaks and updated OS and Updated Default HTC Apps?
Here's you answer - download one of teh full kitchens available (like Sulliers or Mondilv) and make it yourself.
Other way - download latest OEM rom (there's thread for that), ervius kitchen, and cut away to your liking - you will have your "latest light rom".
This is exactly what it is about. Either be ready and donate to the chefs who do such things (cook for demand for payment) or get behind the keyboard and start cooking. it's not that difficult...
This is how I started - got the kitchen, and step by step I go forward. I can't call myself a cook - I only know how to tweak a bit little things, but I'm learning. I suggest you start too
If you are searching for "clean, fast ROM" look no further than Mondilv's kitchen - probably the fastest Rom available now (if we are to trust Pietrucci's benchmarks, and I see no reason why not). Since it;s a kitchen you can do whatever you want to it. And if you are asking "how to edit registry" then maybe your searching skills aren't that good... This like the most basic thing....
Happy cooking!
Good to see people actually read.
At no point did I ask for a ROM. I do recall mentioning that I have downloaded a kitchen and am playing with it.
I did mention that I have searched and my skills in searching are perfectly fine. Considering that fact that I have found the registry information but NOT in XDA.
THe problem with XDA is that if you are to be succesfull in a search you must already know what you want to find (and therefore know the terminology to search for) which then means why search at all seeing you already know. And if you happen to find something you have to read the thread for a week to find the only single post within it that actually gives you an answer.
If you had read my first post properlly and understood it, you would realise I am after information TOO LEARN IT...... but maybe I'll take your suggestion and LEARN it instead.
It really pisses me off when people reply withou fully reading the post, and then tells me exactly what I said I am doing.
For all you know I could be a potential contributer to these threads and you have just destroyed my respect for the people on these threads. Thankyou for your lack of any real help.
Oh and one last thing, I was wrong with the last bit of my first post.
If I ask for the ROM I get flamed, If I ask for help to learn to build a ROM I get told to make a ROM or download one.
Catch 22 around here. Can't ask for help and can't get help. I wanted to build one but if this is the **** I am going to cop just cause I want to learn something and contribute, then its not worth jack ****.
And who are you to say if I have or havn't donated to other ROM Builders.
I would love to try your basic clean ROM, without all the pre installed applications. I have been looking for an up to date naked ROM, but haven't been able to find one.
Good Luck!!!
Well my intention is not a "Naked ROM" but a bare essentials one.
Just updated versions of all the apps that come with a HTC ROM and update OS Core, .NET etc.
Bare Minimum Apps.
good luck man. hope its super fast too.. and stable.
Can someone please point me to an UPDATED list of HTC OEM App Version and hopefully downloads.
I don't mind Ripped stuff, like from TouchFlo2 etc, but I want to leave out beta buggy stuff untill they are are fixed. For example I would want HTC Notifications as it seems to work well (unless I am just lucky) but I won't put in the TouchFlo3D 2 as it is still buggy and unstable.
Oh and VGA versions if possible for my Touch Diamond
Oh and were can I find a 21xxx+ version ROM that I can use?
Hmm, so I want to help, and the best you can do is smirk at my recommendations, and you just carry on:
can you point me here, can I have that or this, and oh, can it be VGA, and possibly with chocolate?
Man, I'm sorry, but there is something wrong. All the info you are looking for IS on this forum. I can't believe that you searched and didn't found. You either search the diamond forum, or use general forum search (which is google) and you just follow the links.
I don't want to belittle you nor argue with you. But just take a second and look at the way how ALL internet forums work. The first thing you do to gain credibility on any forum is to search, learn, then try to help. The last thing you do is to show up, and ask for links "on a platter" in rather demanding manner, and then criticize the answer. I just had a look on your posts and it seems that this is what you do. You repeatedly ask for ready solutions, and when people tell you to search, you are annoyed, or ask "does anybody read posts on this forum?"
I will say just this - google "netiquette" or "how to behave on internet forums".
Good luck in your search for perfect ROM for you.
And here you go not providing any form of help at all.
You say If I did search I searched the Diamond threads or used the Google search..
I have used the google one yes. And I have used the built in search searching for DIamond threads yes.
Now you imply that searching the Diamond is wrong??? I am own a Diamond so why not search the diamond threads.
This is exactly what I am talking about regarding the useless comments of "search the forums" crap I keep reading against any noob.
Instead of pointing people in the right direction you guys just simple say search.
There also seems a limit of more than 3 letter word length to search in the forum search. Cause each time I search OEM or HTC or HTC OEM then it returns No results.
Ontop of all that if and only IF I do actually find something then I have to spend hopurs upon hours readying all the Good job, well done comments before I find the one tiny little comment that actually has the answer. At that rate, for a noob trying his hand at cooking it would take 6 Months to actually find all the answers.
And now you come back and tell me to search, and worst still you tell me that searching for Diamond Rom Development info in the Diamond forums is wrong also. Were was the part that told me were to search?
it seems quite some posts are missing here... xda-developers did a restore from a backup or something after the mess last night? .
Anyway, eangulus. This is what I have so far:
- Started with a stock 2.03 WWE ROM.
- Put in a 21042 SYS + XIP (so it's now 21042 build)
- After that ripped out some stuff:
- NetCF (because it's 2.0 now I installed 3.5 from CAB, we need the OEM for it)
- Manilla
- Opera (I guess we want a newer build)
I also needed to remove it from the 'auto setup' list
- Windows Live
- MP3 Trimmer
- RSS Hub
- AdobePDF
- Cyberon VoiceSpeed dial
- Google Maps (Because we want a newer build or nothing at all)
Also needed to remove it from the 'auto setup list'
- JBedJava
- ZIP
- Office OneNote
- SampleMusic
- SQLCeMobile (Leave the SQLCE engine in)
- Transcriber
The whole thing build nicely, the final .nbh is 86.5mb.
There are a lot of things that can be stripped more ofcourse, and it doesn't have
any 'tweaks' included yet. Stuff I still gotta learn / try out.
Also converting cabs to oem/packages is on the agenda , and see what is easy from
the rhodium / topaz oems to include.
After the flashing and first boot I installed the older STock keyboard (bigger T9) because I still prefer it, installed newer google maps and installed the latest Rhodium Manilla from xboxmod. Runs fine and speedy (still can be faster by cooking it in though).
The notification enhancement works by installed a certain cab afterwards (not the one included in Rhodium Manilla), but Menu Enhancement and the 'manilla start menu' won't work.
My 21038 build that I was working with in the beginning seems just broken or something, because the 21042 XIP/SYS I used worked flawlessy. So I was doing it ok all along, just had broken files .
So, what now from here?
To get you a bit started:
In the end I used bebe's kitchen (http://www.darkforcesteam.com/showthread.php?p=3560). You need to create a user on that forum and wait till they 'approve' you to access the thread though.
In the thread there are a couple of video's posted how to get you started. I watched them, understood them and then started cooking and it worked . I don't know if bepe wants his files freely posted everywhere so I'll let you to get them yourself.
The ROM I used I actually downloaded from the HTC site (http://www.htc.com/www/SupportDownload.aspx?p_id=133&cat=2&dl_id=483). Entered my serial number and got the .exe with the ROM (the ruu_signed.nbh can be extracted by using WinRAR from the .exe).
The XIP/SYS I used are from here: http://forum.xda-developers.com/showthread.php?t=497586
Bepe's kitchen works with a OS.nb files (not .nbh files) so I used NBHUtil to extract it from the .NBH. NBHUtil was included in another kitchen, I got it from there. The kitchen it was included is actually an 'extended' bepe-kitchen, so you might want to play around with that one too: http://forum.xda-developers.com/showthread.php?t=469420.
But in the end, I only used NBHUtil.exe from it .
In his video on how to port a newer build to your kitchen, he uses a complete newer ROM as a starting point. He extracts the XIP/SYS from that. If you do it like me, you don't have a complete newer ROM but only a XIP/SYS downloaded from this forum. They give you a os.nb.payload and a SYS folder. So you skip the part that extract those from a ROM and just instead use the files downloaded.
And that's pretty much it. With those files and the (short!) video tutorial's on Bepe's thread in darkforcesteam.com I managed it make something. (video on starting a kitchen from a ROM, and a video on how to port the XIP/SYS from another ROM to your kitchen). Try it, if you get stuck I'll help you. It isn't hard at all!
..........
sorry
razkal1 said:
..........
sorry
Click to expand...
Click to collapse
or
razkal1 said:
here is .net 3.5
delete your ntcf forlder in sys and replace with this one
Click to expand...
Click to collapse
I actually have it already but thanks for helping out!
Trying out bebe's kitchen and trying an Upgraded OS build as we speak. Not as friendly as some of the other kitchens but with the vid's it is pretty straight forward thou.
Any luck in finding an updated list of HTC OEM Version Numbers and exactly what HTC OEM apps are available for us to package into it?
Im not going to do the manilla yet as I think its still a fraction too buggy. THe main one being atm is being out by 1 hour.
Once its much more stable and bug free then I'll package it. I do want the new notifications and menus thou. they seem to be workig OK.
ALso not sure if this is a HTC app or not but I have seen a new Wifi connection tool. It gives you a list of Wifi available in a Manilla Look, you then just click on one to connect. Do you know what that is called and who does that?
Also do I have to convert the .nb file to a .nbh again?

upgrade hermes 8525

hi all does anyone know how to obtain an upgrade for hermes 8525 from windows 5 to windows 6and how it should be done? or if its advisable to do so....thanks in advance..
There are numerous options. But first you need to put HardSPL on your device. The only method that worked with my AT&T 8525 was the SD card method.
art here http://forum.xda-developers.com/showthread.php?t=419158
There is a lot of information in the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
You can snag the update to the stock wm6 at&t here: http://www.4shared.com/file/96949781/3873b8fd/RUU_Hermes_CINGULAR_WWE_362502.html
There is also a HTC version floating around too. Got it uploaded. http://www.4shared.com/file/174831069/1dd19a3/HTC_TyTN_WWE_3542553_6275_1480.html
I would also suggest making sure your phone has hardslpv7 loaded http://forum.xda-developers.com/showthread.php?t=296722
Then you will be set for flashing! There are tons of custom roms around here as well.
thanks
boog321 said:
There is a lot of information in the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
You can snag the update to the stock wm6 at&t here: http://www.4shared.com/file/96949781/3873b8fd/RUU_Hermes_CINGULAR_WWE_362502.html
There is also a HTC version floating around too, I'm attempting to upload it, says about half an hour left to upload, so, I'll update the link tomorrow.
I would also suggest making sure your phone has hardslpv7 loaded http://forum.xda-developers.com/showthread.php?t=296722
Then you will be set for flashing! There are tons of custom roms around here as well.
Click to expand...
Click to collapse
thank you for your help and info am new to the site and havnt learned it as yet. but will the upgrade inable the infared on my device?
Infrared Should work on your device as is. You may just need to enable receiving of files.
I'm sure all of your answers are buried somewhere here on the site. There is tons of information here. There is a search feature at the top brown bar that will search the entire site using google. It will help you find all sorts of stuff

RadioComm v11.11.11

Here we have it,
RadioComm support tool, used for Motorola Handsets.
I found the link somewhere on the net
This is the latest edition i have found so far,
Good Luck
http://www.mediafire.com/file/62wwr6qw68qvrb6/RadioComm_v11.11.11_Install.msi
Like the availability, Bump the 'Thanks' button. ;]
Guide on how to actually use Radiocomm 11.11.11?
I've only seen screen shots for it but it has a lot of options and looks like a really complex program. All I need it for is to simply flash SPRecovery.spf on my phone when I root it. So could anyone link me to a Radiocomm flashing guide or at least tell me what I need and what to do and if I need to do it before or after rooting? Thanks and I've rooted a lot but never changed recoveries, all the one click root apps give me recoveries that I hate such as RA-eris V1.6.2 because they are a pain. I'm manually rooting my Eris [I've already done manual rooting before] and just choose my own recovery and SPRecovery has gotten a lot more kudos than RA-eris v1.6.2 [Amona Ra?] and ClockworkMod. If anyoen also knows of any other recovieres they like better than please let me know, but for now just a good how to guide for flashing with Radiocomm. Thanks a lot in advance guys! =]
Hi There,
I apologize for not having any links off hand, (though i may be able to update int he future).
I know i have ran across a few guides for radiocomm on the internet... Try using Google.com, and keep an eye out for .pdf files..
I am sure you can tinker around in the menu's also... It is a very robust program...
And, just curious... Did you mean to say .SBF file? instead of .spf?
Good Luck
Here You Go,
I found an older manual for Radiocomm... Idk where i found it, or how helpful it may be... but it's a step in understanding...
Good Luck
yep this tool is interresting...
Here is version 11.12.2
Thanks for posting these files but I can't get them to work. They will not find any of my phones. I have the motorola drivers installed and my puter finds the phone but the radiocomm program won't connect, it stays red. I am running windows 7 with motorola 5.5 drivers, net framework 4 is installed. I tried it in compatability mode, the phones are set to pc mode. my phones are a droid 2 global, and two are a bionic. Can someone please help me out?? Thanks!
For all to know.
The low level tools are written for use with WinXP or lower.
Use with a newer Windows in XP-Mode at your own risk.
That's why to keep an old XP machine (or Win2K) on hand.
Good info everyone!!
Here is a backup link to the version epsylon updated us with.. :]
http://www.4shared.com/archive/0uhGKq5S/RadioComm_v11122_Installmsi.html
Sent from my SGH-T959 using xda app-developers app
anybody radio comm the newest version willing to donate...............thank you
11.12.2 Version
joe zack said:
anybody radio comm the newest version willing to donate...............thank you
Click to expand...
Click to collapse
Here:
https://dl.dropbox.com/u/7632904/RadioComm_v11.12.2_Install.zip
[https://dl.dropbox.com/u/7632904/RadioComm_v11.12.2_Install.zip[/QUOTE]
thank you for the post ,,,,,,,,,,,,sorry i meant leatest version like v11.12.3
but anyway thank you again for posting
lwolf7 said:
For all to know.
The low level tools are written for use with WinXP or lower.
Use with a newer Windows in XP-Mode at your own risk.
That's why to keep an old XP machine (or Win2K) on hand.
Click to expand...
Click to collapse
Well technically the most important thing with these kind of programs is the bits. Most of them are written for 32bit OS.
I'm using win8 32bit and all of my tools work fine. Just used Radiocomm today and yesterday to read some info from some older motorolas.
Granted not *everything* will work. I had to use Blackberry Desktop Manager 6.0 or newer to get it work right.
5.0.1 or older would BSOD on me when I tried to do too much with the RIM Virtual Serial Port.
How to use this program to enable the FM radio on my Motorola phone? Someone claims to have done this using this program but he's not responding to requests for more information. I've installed the program but don't want to brick my phone. In the past I've messed with other programs like QPST and QXDM to enable additional bands so I'm not an entire newbie. Thank you.
Here is a link for using radio comm on droid,https://forum.xda-developers.com/showthr
TimelesslyPrecise said:
Hi There,
I apologize for not having any links off hand, (though i may be able to update int he future).
I know i have ran across a few guides for radiocomm on the internet... Try using Google.com, and keep an eye out for .pdf files..
I am sure you can tinker around in the menu's also... It is a very robust program...
And, just curious... Did you mean to say .SBF file? instead of .spf?
Good Luck
Click to expand...
Click to collapse
,,,https://forum.xda-developers.com/showthread.php?t=2166542

Categories

Resources